Comparative Catalytic Performance Study of 12-Tungstophosphoric Heteropoly Acid Supported on Mesoporous Supports for Biodiesel Production from Unrefined Green Seed Canola Oil

In this study, three solid acid catalysts, namely mesoporous aluminophosphate-supported 12-tungstophosphoric heteropoly acid (HPW/MAP), mesoporous aluminosilicate-supported 12-tungstophosphoric heteropoly acid (HPW/MAS), and gamma alumina-supported 12-tungstophosphoric heteropoly acid (HPW/γ-Al2O3) were prepared and characterized. Mesoporous aluminophosphate (MAP) and mesoporous aluminosilicate (MAS) were synthesized via sol-gel and hydrothermal methods, respectively, and 25 wt.% of 12-tungstophosphoric heteropoly acid (HPW) was immobilized on the support materials using the wet impregnation method. The features of the fabricated catalysts were comprehensively investigated using various techniques such as BET, XRD, NH3-TPD, TGA, and TEM. The surface area of the supported catalysts decreased after HPW impregnation according to BET results, which indicates that HPW loaded on the supports and inside of their pores successfully. The density and strengths of the acid sites of the support materials and the catalysts before reaction and after regeneration were determined by the NH3-TPD technique. Accordingly, an increase in acidity was observed after HPW immobilization on all the support materials. The catalytic performance of the catalysts was studied through alcoholysis reaction using unrefined green seed canola oil as the feedstock. The maximum biodiesel yield of 82.3% was obtained using 3 wt.% of HPW/MAS, with a methanol to oil molar ratio of 20:1, at 200 °C and 4 MPa over 7 h. The reusability study of HPW/MAS showed that it can maintain 80% of its initial activity after five runs.

Sulfonated β-cyclodextrins: efficient supramolecular organocatalysts for diverse organic transformations

The present review summarizes various organic transformations carried out by using sulfonated β-cyclodextrins such as β-cyclodextrin sulfonic acid, β-cyclodextrin propyl sulfonic acid, and β-cyclodextrin butyl sulfonic acid as an efficient, supramolecular reusable catalyst under diverse reaction conditions.

Design and synthesis of a new magnetic metal organic framework as a versatile platform for immobilization of acidic catalysts and CO2 fixation reaction

The first report of the use of an acidic magnetic metal organic framework for the chemical fixation of CO2 as an environmentally friendly reaction.

Influence of Mg/CTAB ratio on the structural, physicochemical properties and catalytic activity of amorphous mesoporous magnesium silicate catalysts

This study investigated the physicochemical and catalytic properties of mesoporous magnesium silicate catalysts prepared at various Mg/CTAB ratios (0.25, 0.50, 0.75 and 1.00). The XPS analysis detected a mixture of enstatite and magnesium carbonate species when the Mg/CTAB ratio was 0.25, and 0.50. A mixture of forsterite and magnesium carbonate species were detected when the Mg/CTAB ratio was 0.75 whereas for the Mg/CTAB ratio of 1.00, enstatite and magnesium metasilicate species were detected. A catalyst with the Mg/CTAB ratio of 1.00 demonstrated the highest catalytic activity in the oxidation of styrene. The styrene conversion rate was 59.0%, with 69.2% styrene oxide (StO) selectivity. The H₂O₂ molecules were activated regio-specifically by the magnesium species to prevent rapid self-decomposition while promoting selective interaction with styrene. All the parameters that influence the styrene conversion and product selectivity were evaluated using analysis of variance (ANOVA) with Tukey's test. The ANOVA analysis showed that the reaction time (h), Mg/CTAB ratio, styrene/H₂O₂ ratio, catalyst loading (mg) and temperature (°C) affect styrene conversion and product selectivity (StO) significantly (p < 0.05). The oxidation of styrene was well fitted to the pseudo-first-order model. The activation energy, E_a of the catalysed styrene epoxidation reaction was calculated to be 27.7 kJmol⁻¹. The catalyst can be reused several times without any significant loss in its activity and selectivity. The results from this study will be useful in designing and developing low cost, high activity catalysts from alkaline earth metals.

Increasing the magnesium content in direct synthesis will lead to the formation of different magnesium active sites that increase the styrene oxide selectivity under the same reaction conditions.

Functionalized Ordered Mesoporous Silicas (MCM-41): Synthesis and Applications in Catalysis

Mesoporous silica sieves are among the most studied nano-objects due to their stable pore structure and easy preparation. In particular, MCM-41 have attracted increasing research attention due to their chemical versatility. This review focuses on the synthesis and regioselective functionalization of MCM-41 to prepare catalytic systems. The topics covered are: mono and di-functionalized MCM-41 as basic and acid catalysts, catalysts based on metallic complexes and heteropolyacids supported onto MCM-41, metallic nanoparticles embed onto functionalized MCM-41 and magnetic MCM-41 for catalytic purposes.

The synthesis, characterization and catalytic application of manganese porphyrins bonded to novel modified SBA-15

In the presented research, a highly ordered mesoporous silica material (SBA-15) was functionalized with imidazole as a functionalizing reagent (SBA-TMSIm) and then characterized via FT-IR spectroscopy, thermogravimetric analysis (TGA), powder X-ray diffraction (XRD) and nitrogen adsorption/desorption isotherms.

Controlled Gold Nanorod Reorientation and Hexagonal Order in Micromolded Gold Nanorod@pNIPAM Microgel Chain Arrays

A one-step soft lithography based pathway to manufacture aligned gold nanorod@poly-(N-isopropylacrylamide) (GNR@pNIPAM) hybrid chains with hexagonal arrangement of the nanorods and with an anisotropic optical response is presented. After demonstration of an efficient synthesis protocol, yielding uniform composite microgels in high concentration, a micromolding procedure using wrinkled polydimethylsiloxane (PDMS) templates to fabricate aligned hybrid chains is introduced. It is found that the self-assembled GNR@pNIPAM microgels inside the PDMS wrinkle grooves can be transferred onto solid substrates, on which they exhibit a hexagonal order, as confirmed by small-angle X-ray scattering. Further, it is shown that the application of minimized PDMS wrinkle dimensions aligns GNRs inside the pNIPAM microgels, and that the optical response of such molded assemblies is anisotropic.

Environmentally friendly cyclotrimerization of substituted acetophenones catalyzed by a new nanocomposite of γ-Al2O3 nanoparticles decorated with H5PW10V2O40

An efficient protocol for the synthesis of C₃-symmetrical 1,3,5-triarylbenzenes under solvent-free conditions. γ-Al₂O₃/H₅PW₁₀V₂O₄₀ nanocomposite is introduced as a highly reusable catalyst.

Mild, efficient, and environmentally friendly synthesis of symmetrical N,N′-alkylidenebisamides under solvent-free conditions catalyzed by H7[(P2W17O61)FeIII(H2O)]

H₇[(P₂W₁₇O₆₁)Fe^III(H₂O)] is introduced as an effective catalyst for the one-pot synthesis ofN,N′-alkylidenebisamides. The catalyst could be easily separated without noticeable reduction in activity.

Homopiperazine sulfamic acid functionalized mesoporous silica nanoparticles (MSNs-HPZ-SO3H) as an efficient catalyst for one-pot synthesis of 1-amidoalkyl-2-naphthols

MSNs-HPZ-SO₃H was synthesized, characterized, and employed as an efficient nanocatalyst in one-pot synthesis of 1-amidoalkyl-2-naphthols.

Heterogenization of heteropoly compounds: a review of their structure and synthesis

The heterogenization of different types of heteropoly compoundsviasix popular methods from those published over the past recent 15 years is reviewed.