Size-tunable rhodium nanostructures for wavelength-tunable ultraviolet plasmonics

UV-resonant magnetoplasmonic properties of chemically synthesized indium nanoparticles

In this article, we for the first time demonstrate magnetoplasmonic properties of metallic indium (In0) nanoparticles, one of the promising non-noble metals for UV plasmonics, by using magnetic circular dichroism (MCD) spectroscopy. In0 nanoparticles are synthesized by a kinetically controlled reduction of indium salts, followed by performing centrifugation-based size selection, giving nanoparticles of 37.5 ± 9.7 or 51.6 ± 8.4 nm in diameter. These In0 nanoparticles exhibit a single extinction peak in the UV region (<300 nm), which can be attributed to localised surface plasmon resonance (LSPR), and upon increasing the particle size, the peak is red-shifted and broadened. The MCD signatures are then typical for circular magnetoplasmonic modes of metal nanospheres, and on the basis of the MCD responses, the effective mass of an electron (m*) of indium is estimated. Interestingly, although the large-sized In0 nanoparticles (51.6 nm) have a broader LSPR linewidth, the magneto-optical (MO) activity is larger than that of the smaller one (37.5 nm), which is unlike the behaviour of Ag nanospheres with high-quality-factor plasmonic performance. This can probably be due not only to the formation of stiff semiconducting (In(OH)3) shell layers on the In0 cores (= In0@In(OH)3 core-shell morphology) but also to the effect of the dielectric function of In0 that can influence the light-helicity-dependent field-induced cyclotron shift.

Key Factors for Controlling Plasmon-Induced Chemical Reactions on Metal Surfaces

Plasmon-induced chemical reactions based on direct interactions between the plasmons of metal nanostructures and molecules have attracted increasing attention as a means of efficiently utilizing sunlight. In recent years, achievements in complex synthetic reactions as well as simple dissociation reactions of gaseous molecules using plasmons have been reported. However, recent research progress has revealed that multiple factors govern plasmon-induced chemical reactions. This perspective provides an overview of the key factors that influence plasmon-induced chemical reactions on metal surfaces and discusses the difficulty of controlling the reactions, which is caused by the entanglement of the key factors. A strategy for designing plasmonic metal catalysts to achieve the desired reactions is also discussed based on the current understanding, and directions for further research are provided.

Ultraviolet Resonant Nanogap Antennas with Rhodium Nanocube Dimers for Enhancing Protein Intrinsic Autofluorescence

Plasmonic optical nanoantennas offer compelling solutions for enhancing light-matter interactions at the nanoscale. However, until now, their focus has been mainly limited to the visible and near-infrared regions, overlooking the immense potential of the ultraviolet (UV) range, where molecules exhibit their strongest absorption. Here, we present the realization of UV resonant nanogap antennas constructed from paired rhodium nanocubes. Rhodium emerges as a robust alternative to aluminum, offering enhanced stability in wet environments and ensuring reliable performance in the UV range. Our results showcase the nanoantenna's ability to enhance the UV autofluorescence of label-free streptavidin and hemoglobin proteins. We achieve significant enhancements of the autofluorescence brightness per protein by up to 120-fold and reach zeptoliter detection volumes, enabling UV autofluorescence correlation spectroscopy (UV-FCS) at high concentrations of several tens of micromolar. We investigate the modulation of fluorescence photokinetic rates and report excellent agreement between the experimental results and numerical simulations. This work expands the applicability of plasmonic nanoantennas to the deep UV range, unlocking the investigation of label-free proteins at physiological concentrations.

Surface Rh-Boosted Photoelectrochemical Water Oxidation of α-Fe2O3 by Reduced Overpotential in the Rate-Determining Step

The photoelectrochemical behavior of Rh cluster-deposited hematite (α-Fe2O3) photoanodes (α-Fe2O3@Rh) was investigated. The interactions between Rh clusters and α-Fe2O3 nanorods were elucidated both experimentally and computationally. A facile UV-assisted solution casting deposition method allowed the deposition of 2 nm Rh clusters on α-Fe2O3. The deposited Rh clusters effectively enhanced the photoelectrochemical performance of the α-Fe2O3 photoanode, and electrochemical impedance spectroscopy (EIS) and Mott-Schottky analysis were applied to understand the working mechanism for the α-Fe2O3@Rh photoanodes. The results revealed a distinctive carrier transport mechanism for α-Fe2O3@Rh and increased carrier density, while the absorbance spectra remained unchanged. Furthermore, density functional theory (DFT) calculations of the oxygen evolution reaction (OER) mechanism corresponded well with the experimental results, indicating a reduced overpotential of the rate-determining step. In addition, DFT calculation models based on the X-ray diffraction (XRD) measurements and X-ray photoelectron spectroscopy (XPS) results provided precise water-splitting mechanisms for the fabricated α-Fe2O3 and α-Fe2O3@Rh nanorods. Owing to enhanced carrier generation and hole transfer, the optimum α-Fe2O3@Rh3 sample showed 78% increased photocurrent density, reaching 1.12 mA/cm-2 at 1.23 VRHE compared to that of the pristine α-Fe2O3 nanorods electrode.

Synthesis Methods and Optical Sensing Applications of Plasmonic Metal Nanoparticles Made from Rhodium, Platinum, Gold, or Silver

The purpose of this paper is to provide an in-depth review of plasmonic metal nanoparticles made from rhodium, platinum, gold, or silver. We describe fundamental concepts, synthesis methods, and optical sensing applications of these nanoparticles. Plasmonic metal nanoparticles have received a lot of interest due to various applications, such as optical sensors, single-molecule detection, single-cell detection, pathogen detection, environmental contaminant monitoring, cancer diagnostics, biomedicine, and food and health safety monitoring. They provide a promising platform for highly sensitive detection of various analytes. Due to strongly localized optical fields in the hot-spot region near metal nanoparticles, they have the potential for plasmon-enhanced optical sensing applications, including metal-enhanced fluorescence (MEF), surface-enhanced Raman scattering (SERS), and biomedical imaging. We explain the plasmonic enhancement through electromagnetic theory and confirm it with finite-difference time-domain numerical simulations. Moreover, we examine how the localized surface plasmon resonance effects of gold and silver nanoparticles have been utilized for the detection and biosensing of various analytes. Specifically, we discuss the syntheses and applications of rhodium and platinum nanoparticles for the UV plasmonics such as UV-MEF and UV-SERS. Finally, we provide an overview of chemical, physical, and green methods for synthesizing these nanoparticles. We hope that this paper will promote further interest in the optical sensing applications of plasmonic metal nanoparticles in the UV and visible ranges.

Spectral properties of intermediate to high refractive index nanocubes

Plasmonic resonances in sub-wavelength cavities, created by metallic nanocubes separated from a metallic surface by a dielectric gap, lead to strong light confinement and strong Purcell effect, with many applications in spectroscopy, enhanced light emission and optomechanics. However, the limited choice of metals, and the constraints on the sizes of the nanocubes, restrict the optical wavelength range of applications. We show that dielectric nanocubes made of intermediate to high refractive index materials exhibit similar but significantly blue shifted and enriched optical responses due to the interaction between gap plasmonic modes and internal modes. This result is explained, and the efficiency of dielectric nanocubes for light absorption and spontaneous emission is quantified by comparing the optical response and induced fluorescence enhancement of nanocubes made of barium titanate, tungsten trioxide, gallium phosphide, silicon, silver and rhodium.

Exciton-polariton light-emitting diode based on a single ZnO superlattice microwire heterojunction with performance enhanced by Rh nanostructures

One-dimensional (1D) wirelike superlattice micro/nanostructures have received considerable attention for potential applications due to their versatility and capability for modulating optical and electrical characteristics. In this study, 1D superlattice microwires (MWs), which are made of undoped ZnO and Ga-doped ZnO with periodic and alternating crystalline layers (ZnO/ZnO:Ga), were synthesized individually. Under optical excitation, a series of resonance peaks in the photoluminescence spectrum can be ascribed to polariton emission, which originates from the coupling interaction of the 1D photonic crystal and confined excitons along the wire direction. Using a p-type GaN layer as the hole transport layer, a kind of waveguide light source based on an individual ZnO/ZnO:Ga superlattice MW was proposed and constructed. By analysing the spatially resolved electroluminescence spectra, the observed multipeak was ascribed to exciton-polariton emission with a vacuum Rabi splitting of about 275 meV. Cladding with Rh nanostructures gives rise to appropriate ultraviolet plasmons, and the Rabi splitting energy of our device was enhanced up to 413 meV. The exciton-polariton properties were further examined using angle-resolved electroluminescence measurements. Therefore, individual superlattice MWs can act as optical microresonators to achieve photon-exciton coupling with a large Rabi splitting energy. The experimental results indicate that an individual ZnO/ZnO:Ga superlattice MW can be generally used in developing exciton-polariton luminescence/lasing light sources, particularly for constructing low-threshold/thresholdless lasers toward pragmatic applications.

Rhodium-Tellurium Nanorod Synthesis Using Galvanic Replacement-Polyol Regrowth for Thermo-Dynamic Dual-Modal Cancer Phototherapy

Rh is a noble metal introduced in bioapplications, including diagnosis and therapy, in addition to its consolidated utilization in organic catalysis and electrocatalysis. Herein, we designed the synthesis of highly crystalline Rh nanocrystal-decorated Rh-Te nanorods (RhTeNRs) through galvanic replacement of sacrificial Te nanorod (TeNR) templates and subsequent polyol regrowth. The obtained RhTeNRs showed excellent colloidal stability and efficient heat dissipation and photocatalytic activity under various laser irradiation wavelengths. Based on the confirmed biocompatibility, RhTeNRs were introduced into in vitro and in vivo cancer phototherapies. The results confirmed the selective physical death of cancer cells in the local area through laser irradiation. While chemotherapy does not guarantee successful treatment due to side effects and resistance, phototherapy using heat and reactive oxygen species generation of RhTeNRs induces physical death.

In-Situ Monitoring the SERS Spectra of para-Aminothiophenol Adsorbed on Plasmon-Tunable Au@Ag Core–Shell Nanostars

Plasmon-induced photocatalysis on noble metal surfaces has attracted broad attention due to its application in sunlight energy conversion, while the selectivity of plasmonic platforms remains unclear. Herein, we present the controlled plasmon-mediated oxidation of para-aminothiophenol (p-ATP) by employing Au@Ag core–shell nanostars with tunable tip plasmons in visible–near-infrared range as reactors. In-situ Raman measurements indicate that Au@Ag core–shell nanostars essentially promote the conversion of p-ATP to 4,4′-dimercaptoazobenzene (DMAB) due to hot carriers excited by localized surface plasmon resonance. Au@Ag nanostars with plasmon modes under resonant light excitation suggested higher catalytic efficiency, as evidenced by the larger intensity ratios between 1440 cm⁻¹ (N=N stretching of DMAB) and 1080 cm⁻¹ shifts (C–S stretching of p-ATP). Importantly, the time-dependent surface-enhanced Raman scattering spectra showed that the conversion efficiency of p-ATP was mainly dictated by the resonance condition between the tip plasmon mode of Au@Ag core–shell nanostars and the excitation light, as well as the choice of excitation wavelength. These results show that plasmon bands of metal nanostructures play an important role in the efficiency of plasmon-driven photocatalysis.

Metallic Plasmonic Array Structures: Principles, Fabrications, Properties, and Applications

The vast development of nanofabrication has spurred recent progress for the manipulation of light down to a region much smaller than the wavelength. Metallic plasmonic array structures are demonstrated to be the most powerful platform to realize controllable light-matter interactions and have found wide applications due to their rich and tunable optical performance through the morphology and parameter engineering. Here, various light-management mechanisms that may exist on metallic plasmonic array structures are described. Then, the typical techniques for fabrication of metallic plasmonic arrays are summarized. Next, some recent applications of plasmonic arrays are reviewed, including plasmonic sensing, surface-enhanced spectroscopies, plasmonic nanolasing, and perfect light absorption. Lastly, the existing challenges and perspectives for metallic plasmonic arrays are discussed. The aim is to provide guidance for future development of metallic plasmonic array structures.

Plasmon-enabled spectrally narrow ultraviolet luminescence device using Pt nanoparticles covered one microwire-based heterojunction

Owing to great luminescent monochromaticity, high stability, and independent of automatic color filter, low dimensional ultraviolet light-emitting diodes (LEDs) via the hyperpure narrow band have attracted considerable interest for fabricating miniatured display equipments, solid state lighting sources, and other ultraviolet photoelectrical devices. In this study, a near-ultraviolet LED composed of one Ga-doped ZnO microwire (ZnO:Ga MW) and p-GaN layer was fabricated. The diode can exhibit bright electroluminescence (EL) peaking at 400.0 nm, with a line width of approximately 35 nm. Interestingly, by introducing platinum nanoparticles (PtNPs), we achieved an ultraviolet plasmonic response; an improved EL, including significantly enhanced light output; an observed blueshift of main EL peaks of 377.0 nm; and a reduction of line width narrowing to 10 nm. Working as a powerful scalpel, the decoration of PtNPs can be employed to tailor the spectral line profiles of the ultraviolet EL performances. Also, a rational physical model was built up, which could help us study the carrier transportation, recombination of electrons and holes, and dynamic procedure of luminescence. This method offers a simple and feasible way, without complicated fabricating technology such as an added insulating layer or core shell structure, to realize hyperpure ultraviolet LED. Therefore, the proposed engineering of energy band alignment by introducing PtNPs can be employed to build up high performance, high spectral purity luminescent devices in the short wavelengths.

Nanoporous Metals: From Plasmonic Properties to Applications in Enhanced Spectroscopy and Photocatalysis

The field of plasmonics is capable of enabling interesting applications in different wavelength ranges, spanning from the ultraviolet up to the infrared. The choice of plasmonic material and how the material is nanostructured has significant implications for ultimate performance of any plasmonic device. Artificially designed nanoporous metals (NPMs) have interesting material properties including large specific surface area, distinctive optical properties, high electrical conductivity, and reduced stiffness, implying their potentials for many applications. This paper reviews the wide range of available nanoporous metals (such as Au, Ag, Cu, Al, Mg, and Pt), mainly focusing on their properties as plasmonic materials. While extensive reports on the use and characterization of NPMs exist, a detailed discussion on their connection with surface plasmons and enhanced spectroscopies as well as photocatalysis is missing. Here, we report on different metals investigated, from the most used nanoporous gold to mixed metal compounds, and discuss each of these plasmonic materials' suitability for a range of structural design and applications. Finally, we discuss the potentials and limitations of the traditional and alternative plasmonic materials for applications in enhanced spectroscopy and photocatalysis.

Pt nanoparticles utilized as efficient ultraviolet plasmons for enhancing whispering gallery mode lasing of a ZnO microwire via Ga-incorporation

Introducing nanostructured metals with ultraviolet plasmonic characters has attracted much attention for fabricating high performance optoelectronic devices in the shorter wavelength spectrum. In this work, platinum nanoparticles (PtNPs) with controlled plasmonic responses in ultraviolet wavelengths were successfully synthesized. To demonstrate the promising availability, PtNPs with desired sizes were deposited on a hexagonal ZnO microwire via Ga-doping (PtNPs@ZnO:Ga MW). Under ultraviolet illumination, typical near-band-edge emission of ZnO:Ga MW was considerably enhanced; meanwhile, the photocurrent is much larger than that of the bare MW. Thereby, the enhanced phenomena of a ZnO:Ga MW is related to localized surface plasmon resonances of the decorated PtNPs. A single MW with a hexagonal cross-section can be a potential platform to construct a whispering gallery mode (WGM) cavity due to its total inner wall reflection. Given this, the influence of PtNPs via ultraviolet plasmons on lasing features of the ZnO:Ga MW was tested. The lasing characteristics are significantly enhanced, including lasing output enhancement, a clear reduction of the threshold and the improvement of the quality factor. To exploit the working principle, PtNPs serving as powerful ultraviolet plasmons can couple with ZnO:Ga excitons, accelerating radiative recombination. Since fabricating stable, typical nanostructured metals with ultraviolet plasmons remains a challenging issue, the results illustrated in the work may offer a low-cost and efficient scheme for achieving plasmon-enhanced wide-bandgap semiconductor based ultraviolet optoelectronic devices with excellent performances.

High performance lasing in a single ZnO microwire using Rh nanocubes

High-purity and size-controlled Rh nanocubes (RhNCs) with plasmonic responses in the ultraviolet spectrum range were synthesized; the ultraviolet plasmonic features of RhNCs have potential applications in wide bandgap semiconductors and optoelectronic devices because of their optical tunability and stability, as well as the compatibility with neighboring semiconductor micro/nanostructures. In this work, by incorporating RhNCs, the near-band-edge emission of a single ZnO microwire is considerably enhanced. When optically pumped by a fs pulsed laser at room temperature, RhNCs-plasmon enhanced high-performance whispering gallery mode (WGM) lasing characteristics, including lower lasing threshold, higher Q-factor, and lasing output enhancement, can be achieved from a single ZnO microwire covered by RhNCs. To further probe the modulation effect of RhNCs plasmons on the lasing characteristics of the ZnO microwires, time-resolved photoluminescence (TRPL) and electromagnetic simulation analyses were also performed. Based on our results, it can be concluded that size-controlled RhNCs with ultraviolet energy-tunable plasmons have the potential for use in optoelectronic devices requiring stable and high-performance in the short wavelength spectrum band owing to their unique ultraviolet plasmonic features.

Galvanic Replacement Reaction as a Route to Prepare Nanoporous Aluminum for UV Plasmonics

There is a growing interest in extending plasmonics applications into the ultraviolet region of the electromagnetic spectrum. Noble metals are commonly used in plasmonic, but their intrinsic optical properties limit their use above 350 nm. Aluminum is probably the most suitable material for UV plasmonics, and in this work we fabricated substrates of nanoporous aluminum starting from an alloy of Al2Mg3. The porous metal is obtained by means of a galvanic replacement reaction. Such nanoporous metal can be exploited to achieve a plasmonic material suitable for enhanced UV Raman spectroscopy and fluorescence. Thanks to the large surface to volume ratio, this material represents a powerful platform for promoting interaction between plasmonic substrates and molecules in the UV.

Employing rhodium tripod stars for ultraviolet plasmon enhanced Fabry–Perot mode lasing

Rhodium tripod stars serving as ultraviolet plasmons can provide a highly competitive platform to achieve high-performance Fabry–Perot lasing of quadrilateral ZnO microwires.

Rhodium nanoparticles impregnated on TiO2: strong morphological effects on hydrogen production

Rhodium nanoparticles with different morphology were synthesized to assess the influence of the exposed facet towards hydrogen production in aqueous methanolic solution.

Facile Green Preparation of Rhodium Nanoclusters Supported Nano-Scaled Graphene Platelets for Sonogashira Coupling Reaction and Reduction of p-Nitrophenol

Rhodium nanoclusters were uniformly dispersed on nano-scaled graphene platelets by a simple ‘mix and heat’ method without using any toxic reagents. Distilled water was used to obtain the homogenous dispersion of Rh-nanoclusters on graphene platelets. The morphology of the resultant catalyst (Rh(0)NCs/GNPs) was studied by means of transmission electron microscope (TEM) and atomic force microscope (AFM) analyses. The X-ray photoemission spectroscope (XPS) result confirmed the metallic form of Rh-nanoclusters in Rh(0)NCs/GNPs. The crystalline property and the interaction between Rh-nanoclusters and graphene platelets (GNPs) were studied by means of XRD and Raman analysis. The Rh-loading in Rh(0)NCs/GNPs was confirmed by scanning electron microscope and energy dispersive spectroscope (SEM-EDS) and inductively coupled plasma-mass spectroscope (ICP-MS) analysis. After being optimized, the Rh(0)NCs/GNPs used as catalyst for the reduction of 4-nitrophenol with NaBH4 and the Sonogashira coupling reaction between iodobenzene with phenylacetylene. To our delight, the Rh(0)NCs/GNPs showed excellent catalytic activity towards the reduction of 4-nitrophenol with an excellent turnover frequency (TOF) value of 112.5 min−1. The kapp and k’ values were calculated to be 62.07 × 10−3 min−1(0.002 mg of Rh(0)NCs/GNPs) and 31035 × 10−3 mg−1 min−1,respectively. Alike, under the optimal conditions, the Rh(0)NCs/GNPs gave the desired product, diphenylacetylene, in a good yield of 87% with 91% selectivity. The Rh(0)NCs/GNPs can be reused without significant loss in its catalytic activity.

The UV Plasmonic Behavior of Rhodium Tetrahedrons—A Numerical Analysis

Rhodium (Rh) nanoparticles have attracted a lot of attention due to their strong and ambient-stable UV plasmonic response. Very recently, the synthesis of Rh tetrahedra with and without concave defect-rich surfaces serving in plasmon assisted photocatalytic energy conversion has been reported. In this work, we perform a systematic numerical study on plasmonic behavior and surface charge distribution in order to optimize the use of Rh tetrahedra in surface-enhanced spectroscopies and photocatalysis. We analyze the effect of the edges and corners reshaping, a deformation already reported to appear in Rh nanocubes which have been repeatedly re-used in photocatalytic processes. It is demonstrated that rounding the edges and corners weakens both the near-field enhancement and surface charge densities in these locations, which in turn are the more reactive regions due to the presence of uncoordinated sites. In addition, we study how the near-field and charge density is redistributed on the surface of the tetrahedra when concavities of different sizes and depths are introduced. Through this study, we show that, in order to simultaneously maximize the near-field enhancement and surface charge densities in the concavity and at external edges and corners, medium size deep concavities are needed.

Size and shape controlled synthesis of rhodium nanoparticles

Controlling of the size and/or shape of noble metal nanoparticles (NMNPs) is crucial to make use of their unique properties and to optimize their performance for a given application. Within the past decades, the development of wet-chemistry methods enables fine tailoring of the size and morphology of NMNPs. We herein devote this review to introduce the wet-chemistry-based methods for the size and shape-controlled synthesis of rhodium (Rh) NPs. We start with a summarization of the wet-chemistry-based approaches developed for producing Rh NPs and then focus on recent fascinating advances in their size- and shape-control in the aspects of kinetic and thermodynamic regimes depending on the synthetic conditions. Then, we use several typical examples to showcase the applications of Rh NPs with tunable sizes and shapes. Finally, we make some perspectives for the further research trends and development of Rh NPs. We hope through this reviewing effort, one can easily understand the technical bases for effectively designing and producing Rh NPs with desired properties.

Rhodium nanocubes and nanotripods for highly sensitive ultraviolet surface-enhanced Raman spectroscopy

We report the shape- and wavelength-dependent ultrasensitive label-free detection of adenine on rhodium cube- and tripod-star-like nanoparticles (Rh NPs) using ultraviolet surface-enhanced Raman scattering (UV-SERS). Rh NPs immobilized on a silane-treated glass substrate probed at near-resonant and non-resonant wavelengths served as the SERS platform for the highly reproducible, stable, and real-time detection of adsorbed adenine molecules in the femtomolar region. The sensitivity of SERS-active Rh NPs displaying LSPR in the UV region was exploited for the 266 nm (DUV), 325 nm (UV) and 532 nm (visible) Raman excitation wavelengths. With the 266 nm and 325 nm DUV-UV excitation lines, for the Rh tripod geometry near or pre-resonant excitation being closer to the analyte absorption band combined with the intrinsic UV-LSPR resonant energy produced a SERS enhancement factor as high as 105 and accelerated photoinduced degradations compared to 532 nm for our substrates. Computational results consistent with the experiment clearly demonstrated that the NP SERS enhancement was sensitive to both the intrinsic optical properties of Rh in the UV region and the excitation closer to the LSPR peak producing larger EM enhancements. The wavelength-dependent correlations between the optical properties of the shape-tailored Rh NPs and SERS enhancements envisage the merit and demerit of DUV-UV excitation over visible excitation for Raman measurements. The as-fabricated SERS substrate could also be efficiently recycled using O2 plasma for the detection of other biomolecules. The use of oxide-free transition metal Rh and DUV-UV excitation thereby extends the improved generality of the SERS technique for ultrasensitive bimolecular detection and for gaining a comprehensive understanding of UV-SERS-based applications.

Plasmon-Enhanced Catalysis: Distinguishing Thermal and Nonthermal Effects

In plasmon-enhanced heterogeneous catalysis, illumination accelerates reaction rates by generating hot carriers and hot surfaces in the constituent nanostructured metals. In order to understand how photogenerated carriers enhance the nonthermal reaction rate, the effects of photothermal heating and thermal gradients in the catalyst bed must be confidently and quantitatively characterized. This is a challenging task considering the conflating effects of light absorption, heat transport, and reaction energetics. Here, we introduce a methodology to distinguish the thermal and nonthermal contributions from plasmon-enhanced catalysts, demonstrated by illuminated rhodium nanoparticles on oxide supports to catalyze the CO₂ methanation reaction. By simultaneously measuring the total reaction rate and the temperature gradient of the catalyst bed, the effective thermal reaction rate may be extracted. The residual nonthermal rate of the plasmon-enhanced reaction is found to grow with a superlinear dependence on illumination intensity, and its apparent quantum efficiency reaches ∼46% on a Rh/TiO₂ catalyst at a surface temperature of 350 °C. Heat and light are shown to work synergistically in these reactions: the higher the temperature, the higher the overall nonthermal efficiency in plasmon-enhanced catalysis.

Plasmonics in the Ultraviolet with Aluminum, Gallium, Magnesium and Rhodium

Ultraviolet plasmonics (UV) has become an active topic of research due to the new challenges arising in fields such as biosensing, chemistry or spectroscopy. Recent studies have pointed out aluminum, gallium, magnesium and rhodium as promising candidates for plasmonics in the UV range. Aluminum and magnesium present a high oxidation tendency that has a critical effect in their plasmonic performance. Nevertheless, gallium and rhodium have drawn a lot of attention because of their low tendency of oxidation and, at the same time, good plasmonic response in the UV and excellent photocatalytic properties. Here, we present a short overview of the current state of UV plasmonics with the latest findings in the plasmonic response and applications of aluminum, gallium, magnesium and rhodium nanoparticles.

The UV Plasmonic Behavior of Distorted Rhodium Nanocubes

For applications of surface-enhanced spectroscopy and photocatalysis, the ultraviolet (UV) plasmonic behavior and charge distribution within rhodium nanocubes is explored by a detailed numerical analysis. The strongest plasmonic hot-spots and charge concentrations are located at the corners and edges of the nanocubes, exactly where they are the most spectroscopically and catalytically active. Because intense catalytic activity at corners and edges will reshape these nanoparticles, distortions of the cubical shape, including surface concavity, surface convexity, and rounded corners and edges, are also explored to quantify how significantly these distortions deteriorate their plasmonic and photocatalytic properties. The fact that the highest fields and highest carrier concentrations occur in the corners and edges of Rh nanocubes (NCs) confirms their tremendous potential for plasmon-enhanced spectroscopy and catalysis. It is shown that this opportunity is fortuitously enhanced by the fact that even higher field and charge concentrations reside at the interface between the metal nanoparticle and a dielectric or semiconductor support, precisely where the most chemically active sites are located.

Hybrid magnetite-gold nanoparticles as bifunctional magnetic-plasmonic systems: three representative cases

Hybrid systems based on magnetite and gold nanoparticles have been extensively used as bifunctional materials for bio- and nano-technology. The properties of these composites are assumed to be closely related to the magnetite to gold mass ratio and to the geometry of the resulting hetero-structures. To illustrate this, we compare and analyze the optical and magnetic properties of core-shell, dumbbell-like dimers and chemical cross-linked pairs of magnetite and gold nanoparticles in detail. We explore how the combination of gold with magnetite can lead to an improvement of the optical properties of these systems, such as tunability, light scattering enhancement or an increase of the local electric field at the interface between magnetic and plasmonic constituents. We also show that although the presence of gold might affect the magnetic response of these hybrid systems, they still show good performance for magnetic applications; indeed the resulting magnetic properties are more dependent on the NP size dispersion. Finally, we identify technological constraints and discuss prospective routes for the development of further magnetic-plasmonic materials.

Product selectivity in plasmonic photocatalysis for carbon dioxide hydrogenation

Photocatalysis has not found widespread industrial adoption, in spite of decades of active research, because the challenges associated with catalyst illumination and turnover outweigh the touted advantages of replacing heat with light. A demonstration that light can control product selectivity in complex chemical reactions could prove to be transformative. Here, we show how the recently demonstrated plasmonic behaviour of rhodium nanoparticles profoundly improves their already excellent catalytic properties by simultaneously reducing the activation energy and selectively producing a desired but kinetically unfavourable product for the important carbon dioxide hydrogenation reaction. Methane is almost exclusively produced when rhodium nanoparticles are mildly illuminated as hot electrons are injected into the anti-bonding orbital of a critical intermediate, while carbon monoxide and methane are equally produced without illumination. The reduced activation energy and super-linear dependence on light intensity cause the unheated photocatalytic methane production rate to exceed the thermocatalytic rate at 350 °C.

How an oxide shell affects the ultraviolet plasmonic behavior of Ga, Mg, and Al nanostructures

The ultraviolet (UV) range presents new challenges for plasmonics, with interesting applications ranging from engineering to biology. In previous research, gallium, aluminum, and magnesium were found to be very promising UV plasmonic metals. However, a native oxide shell surrounds nanostructures of these metals that affects their plasmonic response. Here, through a nanoparticle-oxide core-shell model, we present a detailed electromagnetic analysis of how oxidation alters the UV-plasmonic response of spherical or hemisphere-on-substrate nanostructures made of those metals by analyzing the spectral evolution of two parameters: the absorption efficiency (far-field analysis) and the enhancement of the local intensity averaged over the nanoparticle surface (near-field analysis).