Sandwich-like nitrogen-doped porous carbon/graphene nanoflakes with high-rate capacitive performance

Preparation of Nitrogen Doped Biochar-Based Iron Catalyst for Enhancing Gasoline-Range Hydrocarbons Production

Developing catalysts to obtain high space time yield (STY) of gasoline-range hydrocarbons via Fischer-Tropsch synthesis (FTS) is a huge challenge due to the restriction of Anderson-Schulz-Flory distribution. Herein, a nitrogen doped biochar-based iron catalyst was synthesized by a one-step method using sugar cane bagasse as carbon precursor, which exhibited an excellent gasoline STY of 8.65 g_C5-12 g_Fe^-1 h^-1, exceeding most reported catalysts. A strong positive relationship between the amount of pyrrolic N and long-chain hydrocarbons selectivity was displayed. The characterization results indicated that pyrrolic N configuration on anchor sites tuned effectively the dispersion of iron species and metal-support interaction as well as CO adsorption, improving the FTS performance.

Preparation of N/O co-doped porous carbon by a one-step activation method for supercapacitor electrode materials

Heteroatom-doped carbon materials used in supercapacitors are low in cost and demonstrate extraordinary performance. Here, ethylenediamine tetraacetic acid (EDTA) with intrinsic N and O elements is selected as a raw material for the preparation of heteroatom self-doped porous carbon. Furthermore, N/O self-doped porous carbon with a large surface area has been successfully prepared using K₂CO₃ as the activator. The derived sample with a 1 : 2 molar ratio of EDTA to K₂CO₃ (EK-2) demonstrates a porous structure, rich defects, a large surface area of 2057 m² g⁻¹ and a micropore volume of 0.25 cm³ g⁻¹. Benefiting from high N content (2.89 at%) and O content (10.75 at%), EK-2 exhibits superior performance, including high capacitance of 325 F g⁻¹ at 1 A g⁻¹ and outstanding cycling stability with 96.8% retention after 8000 cycles at 10 A g⁻¹, which strongly confirms its immense potential toward many applications. Additionally, the maximum energy density of EK-2 reaches was 17.01 W h kg⁻¹ at a power density of 350 W kg⁻¹ in a two-electrode system. This facile and versatile strategy provides a scalable approach for the batch synthesis of N/O co-doped carbonaceous electrode materials for energy storage.

Heteroatom-doped carbon materials used in supercapacitors are low in cost and demonstrate extraordinary performance.

Temperature-Dependent Morphologies of Precursors: Metal-Organic Framework-Derived Porous Carbon for High-Performance Electrochemical Double-Layer Capacitors

In this work, three Cu metal-organic framework samples with tunable rhombic, squama, and trucated bipyramid morphologies have been synthesized at 0, 25, and 60 °C, respectively, and further employed as precursors to initially prepare Cu@C composites by the calcination-thermolysis procedure. Then Cu@C composites have been etched with HCl and subsequently activated with KOH to obtain activated porous carbon (APC-0, -25, and -60). Interestingly, APC-25 presents a loose multilevel morphology of cabbage and possesses the largest specific surface area (1880.4 m² g^-1) and pore volume (0.81 cm³ g^-1) among these APC materials. Consequently, APC-25 also exhibits the highest specific capacitance of 196 F g^-1 at 0.5 A g^-1, and the corresponding symmetric supercapacitor cell (SSC) achieves a remarkable energy density of 11.8 Wh kg^-1 at a power density of 350 W kg^-1. Furthermore, APC-25 shows excellent cycling stability, and the loss of capacitance is only 7.7% even after 10000 cycles at 1 A g^-1. Significantly, five light-emitting diodes can be lit by six SSCs, which proves that APC-25 can be used in energy storage devices.

An N-doped porous carbon network with a multidirectional structure as a highly efficient metal-free catalyst for the oxygen reduction reaction

Metal-free catalysts have gained substantial attention as a promising candidate to replace the expensive platinum (Pt) catalysts for the oxygen reduction reaction (ORR) which is a key process in low temperature fuel cells. Development of highly efficient and mass-producible N-doped carbon catalysts, however, remains to be a great challenge. In this study, N-doped porous carbon (NPC) materials were synthesized via a simple, cost-effective and scalable method for mass production by using the d-gluconic acid sodium salt, pyrrole, Triton X-100 and KOH. The resulting NPC possessed a multidirectional porous carbon network (SBET: 1026.6 m2 g-1, Vt: 1.046 cm3 g-1) with hierarchical porosity and plenty of graphitic N species (49.1%). Electrochemical tests showed that the NPC itself was highly active for the ORR under alkaline and acidic conditions via a four electron pathway for the complete reduction of O2 in water. More importantly, this NPC catalyst demonstrated better performance than commercial Pt/C catalysts in terms of long-term durability and methanol tolerance under both conditions.

Nitrogen and Sulfur Co-Doped Graphene Nanosheets to Improve Anode Materials for Sodium-Ion Batteries

Sodium-ion batteries (SIBs) attract more attention because of sodium's abundant availability, affordable price, and potential to be an effective anode material. Meanwhile, carbon-based materials provide the most promising anode materials. Because of the large radius of sodium ions, SIBs do not exhibit favorable electrochemical performance. Introducing heteroatoms into the carbon-lattice is an effective strategy to enlarge the interlayer space of carbon-based materials which can improve carbon's electrochemical performance. In addition, anode materials with a surface-induced capacitive process can enhance the SIB's electrochemical performance because its capacitive process increases the kinetics of ion diffusion. Here, we describe an SIB's anode material containing nitrogen and sulfur co-doped graphene sheets [denoted as poly(2,5-dimercapto-1,3,4-thiadiazole) (PDMcT)/reduced graphene oxide (RGO)] which are synthesized via carbonization of PDMcT polymerized on the surface of GO. PDMcT/RGO exhibited high capacities (240 mA h g^-1 at 500 mA g^-1), improved rate performance (144 mA h g^-1 at 10 A g^-1), and good cycling stability (153 mA h g^-1 after 5000 cycles at 5000 mA g^-1). These unique results are attributed to the enlarged interlayer spacing and electronic conductivity from the heteroatoms which facilitate the sodium ion's insertion and electron transport. These results represent that PDMcT/RGO is a great potential anode material for SIBs.

Performance of Partially Exfoliated Nitrogen-Doped Carbon Nanotubes Wrapped with Hierarchical Porous Carbon in Electrolytes

The preparation of highly conductive, high-surface-area, heteroatom-doped, porous carbon nanocomposite materials with enhanced electrochemical performance for sustainable energy-storage technologies, such as supercapacitors, is challenging. Herein, a route for the large-scale synthesis of nitrogen-doped porous carbon wrapped partially exfoliated carbon nanotubes (N-PPECNTs) with an interconnected hierarchical porous structure, as an advanced electrode material that can realize several potential applications for energy storage, is presented. Polypyrrole conductive polymer acts as both nitrogen and carbon sources that contribute to the pseudocapacitance. Partially exfoliated carbon nanotubes (PECNTs) provide a high specific surface area for ion and charge transportation and act as a conductive matrix. The derived porous N-PPECNT displays a nitrogen content of 6.95 at %, with a specific surface area of 2050 m²  g^-1 , and pore volume of 1.13 cm³  g^-1 . N-PPECNTs, as an electrode material for supercapacitors, exhibit an excellent specific capacitance of 781 F g^-1 at 2 A g^-1 , with a high cycling stability of 95.3 % over 10 000 cycles. Furthermore, the symmetric supercapacitor exhibits remarkable energy densities as high as 172.8, 62.7, and 53.55 Wh kg^-1 in 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][TFSI]), organic, and aqueous electrolytes, respectively. Also, biocompatible hydrogel and polymer gel electrolyte based, stable, flexible supercapacitors with excellent electrochemical performance could be demonstrated.

Scalable 2D Hierarchical Porous Carbon Nanosheets for Flexible Supercapacitors with Ultrahigh Energy Density

2D carbon nanomaterials such as graphene and its derivatives, have gained tremendous research interests in energy storage because of their high capacitance and chemical stability. However, scalable synthesis of ultrathin carbon nanosheets with well-defined pore architectures remains a great challenge. Herein, the first synthesis of 2D hierarchical porous carbon nanosheets (2D-HPCs) with rich nitrogen dopants is reported, which is prepared with high scalability through a rapid polymerization of a nitrogen-containing thermoset and a subsequent one-step pyrolysis and activation into 2D porous nanosheets. 2D-HPCs, which are typically 1.5 nm thick and 1-3 µm wide, show a high surface area (2406 m² g^-1 ) and with hierarchical micro-, meso-, and macropores. This 2D and hierarchical porous structure leads to robust flexibility and good energy-storage capability, being 139 Wh kg^-1 for a symmetric supercapacitor. Flexible supercapacitor devices fabricated by these 2D-HPCs also present an ultrahigh volumetric energy density of 8.4 mWh cm^-3 at a power density of 24.9 mW cm^-3 , which is retained at 80% even when the power density is increased by 20-fold. The devices show very high electrochemical life (96% retention after 10000 charge/discharge cycles) and excellent mechanical flexibility.

Synthesis of cobalt-doped nickel sulfide nanomaterials with rich edge sites as high-performance supercapacitor electrode materials

Edge site enrichment enhanced the electrochemical performance of Ni_0.75Co_0.25S₂ for supercapacitor application.

Facile Construction of Novel 3-Dimensional Graphene/Amorphous Porous Carbon Hybrids with Enhanced Lithium Storage Properties

Presently, porous materials have become essential to many technological applications. In this account, 3-dimensional skeleton composite materials consisting of a core-shell amorphous porous carbon/multilayer graphene are synthesized by chemical vapor deposition on Ni foam using a facile one-step growth method. The data suggest that these composites have not only outstanding electrical and mechanical properties of the multilayer graphene but also the mesoporous characteristics of the amorphous carbon. Moreover, the composited carbon materials perfectly inherit the macroporous structure of Ni foam, and the amorphous carbon core in the skeleton serves as a cushion to buffer the volume variation after the removal of Ni. The carbon composites reveal ultralow density (4.45 mg cm^-3) and high conductivity (45 S cm^-1), essentially issued from the perfectly preserved structural integrity of graphene. The novel carbon composites can be used as anodes for lithium ion batteries. After these carbon composites are incorporated with NaBiO₃, superior electrochemical activities above 2 V can be achieved with a discharge capacity of ∼300 mAh g^-1.

Electrostatic Self-Assembly of Sandwich-Like CoAl-LDH/Polypyrrole/Graphene Nanocomposites with Enhanced Capacitive Performance

A novel sandwich-like composite with ultrathin CoAl-layered double hydroxide (LDH) nanoplates electrostatically assembled on both sides of two-dimensional polypyrrole/graphene (PG) substrate has been successfully fabricated using facile hydrothermal techniques. The PG not only serves as an excellent conductive and structural scaffold to enhance the transmission of electrons and prevent aggregation of CoAl-LDH nanoplates but also contributes to the enhancement of the specific capacitance. Owing to the homogeneous dispersion of CoAl-LDH nanoplates and its intimate interaction with PG substrate, the resulting CoAl-LDH/PG nanocomposite material exhibits excellent capacitive performance, for example, enhanced gravimetric specific capacitance (864 F g^-1 at 1 A g^-1 ), high rate performance (75% retention at 20 A g^-1), and excellent cycle life (almost no degradation in supercapacitor performance after 5000 cycles) in aqueous KOH solution. Furthermore, the assembled asymmetric capacitor is able to deliver a superhigh energy density of 46.8 Wh kg^-1 at 1.2 kW kg^-1 and maintain 90.1% of its initial capacitance after 10 000 cycles. These results indicate a rational assembly strategy toward a high-performance pseudocapacitive electrode material with excellent rate performance, high specific capacitance, and outstanding cycle stability.