Polyimide/Ionic Liquids Hybrid Membranes with NH3-Philic Channels for Ammonia-Based CO2 Separation Processes

An efficient separation technology involving ammonia (NH3) and carbon dioxide (CO2) is of great importance for achieving low-carbon economy, environmental protection, and resource utilization. However, directly separating NH3 and CO2 for ammonia-based CO2 capture processes is still a great challenge. Herein, we propose a new strategy for selective separation of NH3 and CO2 by functional hybrid membranes that integrate polyimide (PI) and ionic liquids (ILs). The incorporated protic IL [Bim][NTf2] is confined in the interchain segment of PI, which decreases the fractional free volume and narrows the gas transport channel, benefiting the high separation selectivity of hybrid membranes. At the same time, the confined IL also provides high NH3 affinity for transport channels, promoting NH3 selective and fast transport owing to strong hydrogen bonding interaction between [Bim][NTf2] and NH3 molecules. Thus, the optimal hybrid membrane exhibits an ultrahigh NH3/CO2 ideal selectivity of up to 159 at 30 °C without sacrificing permeability, which is 60 times higher than that of the neat PI membrane and superior to the state-of-the art reported values. Moreover, the introduction of [Bim][NTf2] also reduces the permeation active energy of NH3 and reverses the hybrid membrane toward "NH3 affinity", as understood by studying the effect of temperature. Also, NH3 molecules are much easier to transport at high temperature, showing great application potential in direct NH3/CO2 separation. Overall, this work provides a promising ultraselective membrane material for ammonia-based CO2 capture processes.

Comparison of Homo-Polyimide Films Derived from Two Isomeric Bis-Benzimidazole Diamines

Heteroaromatic polyimides (PIs) containing benzimidazole have attracted tremendous attention due to their positive impact on the properties of PIs. Some research on PIs containing 4,4'-[5,5'-bi-1H-benzimidazole]-2,2'-diylbis-benzenamine (4-AB) has been reported. However, reports are lacking on homo-polyimides (homo-PIs) containing 3,3'-[5,5'-bi-1H-benzimidazole]-2,2'-diylbis-benzenamine (3-AB), which is one of the isomers of 4-AB. In this paper, the influence of amino groups' positions on the performance of homo-PIs was investigated. It was found that the net charge of the amine N group in 4-AB was lower than that of 3-AB, resulting in higher reactivity of 4-AB. Consequently, PIs containing 4-AB displayed better mechanical performance. Molecular simulation confirmed that 3-AB and its corresponding PI chain exhibited distorted conformation, leading to the PI films containing 3-AB having a lighter color. In addition, the 3-AB structure was calculated to have higher rotational energy compared to 4-AB, resulting in a higher glass transition temperature (Tg) in PIs prepared from 3-AB. On the other hand, PIs containing 4-AB exhibited a higher level of molecular linearity, leading to a lower coefficient of thermal expansion (CTE) compared to PIs prepared from 3-AB. Furthermore, all PIs showed higher thermal stability with a 5% weight loss temperature above 530 °C and Tg higher than 400 °C.

The Influence of Polycation and Counter-Anion Nature on the Properties of Poly(ionic liquid)-Based Membranes for CO2 Separation

The current investigation is focused on the development of composite membranes based on polymeric ionic liquids (PILs) containing imidazolium and pyridinium polycations with various counterions, including hexafluorophosphate, tetrafluoroborate, and bis(trifluoromethylsulfonyl)imide. A combination of spectroscopic methods was used to identify the synthesized PILs and characterize their interaction with carbon dioxide. The density and surface free energy of polymers were performed by wettability measurements, and the results are in good agreement with the permeability and selectivity obtained within the gas transport tests. It was shown that the membranes with a selective layer based on PILs exhibit relatively high permeability with CO₂ and high ideal selectivity CO₂/CH₄ and CO₂/N₂. Additionally, it was found that the type of an anion significantly affects the performance of the obtained membranes, with the most pronounced effect from bis-triflimide-based polymers, showing the highest permeability coefficient. These results provide valuable insights into the design and optimization of PIL-based membranes for natural and flue gas treatment.

Tunning CO2 Separation Performance of Ionic Liquids through Asymmetric Anions

This work aims to explore the gas permeation performance of two newly-designed ionic liquids, [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂], in supported ionic liquid membranes (SILM) configuration, as another effort to provide an overall insight on the gas permeation performance of functionalized-ionic liquids with the [C₂mim]⁺ cation. [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] single gas separation performance towards CO₂, N₂, and CH₄ at T = 293 K and T = 308 K were measured using the time-lag method. Assessing the CO₂ permeation results, [C₂mim][CF₃BF₃] showed an undermined value of 710 Barrer at 293.15 K and 1 bar of feed pressure when compared to [C₂mim][BF₄], whereas for the [C₂mim][CF₃SO₂C(CN)₂] IL an unexpected CO₂ permeability of 1095 Barrer was attained at the same experimental conditions, overcoming the results for the remaining ILs used for comparison. The prepared membranes exhibited diverse permselectivities, varying from 16.9 to 22.2 for CO₂/CH₄ and 37.0 to 44.4 for CO₂/N₂ gas pairs. The thermophysical properties of the [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] ILs were also determined in the range of T = 293.15 K up to T = 353.15 K at atmospheric pressure and compared with those for other ILs with the same cation and anion's with similar chemical moieties.

Electrochemical Synthesis of Unique Nanomaterials in Ionic Liquids

The review considers the features of the processes of the electrochemical synthesis of nanostructures in ionic liquids (ILs), including the production of carbon nanomaterials, silicon and germanium nanoparticles, metallic nanoparticles, nanomaterials and surface nanostructures based on oxides. In addition, the analysis of works on the synthesis of nanoscale polymer films of conductive polymers prepared using ionic liquids by electrochemical methods is given. The purpose of the review is to dwell upon an aspect of the applicability of ILs that is usually not fully reflected in modern literature, the synthesis of nanostructures (including unique ones that cannot be obtained in other electrolytes). The current underestimation of ILs as an electrochemical medium for the synthesis of nanomaterials may limit our understanding and the scope of their potential application. Another purpose of our review is to expand their possible application and to show the relative simplicity of the experimental part of the work.

Emerging iongel materials towards applications in energy and bioelectronics

In the past two decades, ionic liquids (ILs) have blossomed as versatile task-specific materials with a unique combination of properties, which can be beneficial for a plethora of different applications. The additional need of incorporating ILs into solid devices led to the development of a new class of ionic soft-solid materials, named here iongels. Nowadays, iongels cover a wide range of materials mostly composed of an IL component immobilized within different matrices such as polymers, inorganic networks, biopolymers or inorganic nanoparticles. This review aims at presenting an integrated perspective on the recent progress and advances in this emerging type of material. We provide an analysis of the main families of iongels and highlight the emerging types of these ionic soft materials offering additional properties, such as thermoresponsiveness, self-healing, mixed ionic/electronic properties, and (photo)luminescence, among others. Next, recent trends in additive manufacturing (3D printing) of iongels are presented. Finally, their new applications in the areas of energy, gas separation and (bio)electronics are detailed and discussed in terms of performance, underpinning it to the structural features and processing of iongel materials.

Polyelectrolytes as Building Blocks for Next-Generation Membranes with Advanced Functionalities

The global society is in a transition, where dealing with climate change and water scarcity are important challenges. More efficient separations of chemical species are essential to reduce energy consumption and to provide more reliable access to clean water. Here, membranes with advanced functionalities that go beyond standard separation properties can play a key role. This includes relevant functionalities, such as stimuli-responsiveness, fouling control, stability, specific selectivity, sustainability, and antimicrobial activity. Polyelectrolytes and their complexes are an especially promising system to provide advanced membrane functionalities. Here, we have reviewed recent work where advanced membrane properties stem directly from the material properties provided by polyelectrolytes. This work highlights the versatility of polyelectrolyte-based membrane modifications, where polyelectrolytes are not only applied as single layers, including brushes, but also as more complex polyelectrolyte multilayers on both porous membrane supports and dense membranes. Moreover, free-standing membranes can also be produced completely from aqueous polyelectrolyte solutions allowing much more sustainable approaches to membrane fabrication. The Review demonstrates the promise that polyelectrolytes and their complexes hold for next-generation membranes with advanced properties, while it also provides a clear outlook on the future of this promising field.

A Review on Ionic Liquid Gas Separation Membranes

Ionic liquids have attracted the attention of the industry and research community as versatile solvents with unique properties, such as ionic conductivity, low volatility, high solubility of gases and vapors, thermal stability, and the possibility to combine anions and cations to yield an almost endless list of different structures. These features open perspectives for numerous applications, such as the reaction medium for chemical synthesis, electrolytes for batteries, solvent for gas sorption processes, and also membranes for gas separation. In the search for better-performing membrane materials and membranes for gas and vapor separation, ionic liquids have been investigated extensively in the last decade and a half. This review gives a complete overview of the main developments in the field of ionic liquid membranes since their first introduction. It covers all different materials, membrane types, their preparation, pure and mixed gas transport properties, and examples of potential gas separation applications. Special systems will also be discussed, including facilitated transport membranes and mixed matrix membranes. The main strengths and weaknesses of the different membrane types will be discussed, subdividing them into supported ionic liquid membranes (SILMs), poly(ionic liquids) or polymerized ionic liquids (PILs), polymer/ionic liquid blends (physically or chemically cross-linked 'ion-gels'), and PIL/IL blends. Since membrane processes are advancing as an energy-efficient alternative to traditional separation processes, having shown promising results for complex new separation challenges like carbon capture as well, they may be the key to developing a more sustainable future society. In this light, this review presents the state-of-the-art of ionic liquid membranes, to analyze their potential in the gas separation processes of the future.

Mesoporous polyetherimide thin films via hydrolysis of polylactide-b-polyetherimide-b-polylactide

Hydrolyzing polylactide-b-polyetherimide-b-polylactide triblock copolymers produces mesoporous polyetherimide thin films with an average pore width of 24 nm.

Synthesis of Imidazolium based PILs and Investigation of Their Blend Membranes for Gas Separation

Polymeric (ionic liquid) (PIL) copolymers bearing cationic imidazolium pendants and polar acrylic acid groups (P(VBCImY-co-AA_x)), which both favor the interaction with CO₂ molecules, have been synthesized and blended with film forming, high glass transition temperature aromatic polyether-based pyridinium PILs (PILPyr). The blend membranes based on the above combination have been prepared and characterized in respect to their thermal and morphological behavior as well as to their gas separation properties. The used copolymers and blends showed a wide range of glass transition temperatures from 32 to 286 °C, while blends exhibited two phase morphology despite the presence of polar groups in the blend components that could participate in specific interactions. Finally, the membranes were studied in terms of their gas separation behavior. It revealed that blend composition, counter anion type and acrylic acid molar percentage affect the gas separation properties. In particular, PILPyr-TFSI/P(VBCImTFSI-co-AA₂₀) blend with 80/20 composition shows CO₂ permeability of 7.00 Barrer and quite high selectivity of 103 for the CO₂/CH₄ gas pair. Even higher CO₂/CH_4. selectivity of 154 was achieved for PILPyr-BF₄/P(VBCImBF₄-co-AA₁₀) blend with composition 70/30.

Synthesis and Performance of 6FDA-Based Polyimide-Ionenes and Composites with Ionic Liquids as Gas Separation Membranes

Three new isomeric 6FDA-based polyimide-ionenes, with imidazolium moieties and varying regiochemistry (para-, meta-, and ortho- connectivity), and composites with three different ionic liquids (ILs) have been developed as gas separation membranes. The structural-property relationships and gas separation behaviors of the newly developed 6FDA polyimide-ionene + IL composites have been extensively studied. All the 6FDA-based polyimide-ionenes exhibited good compatibility with the ILs and produced homogeneous hybrid membranes with the high thermal stability of ~380 °C. Particularly, [6FDA I4A pXy][Tf2N] ionene + IL hybrids having [C4mim][Tf2N] and [Bnmim][Tf2N] ILs offered mechanically stable matrixes with high CO2 affinity. The permeability of CO2 was increased by factors of 2 and 3 for C4mim and Bnmim hybrids (2.15 to 6.32 barrers), respectively, compared to the neat [6FDA I4A pXy][Tf2N] without sacrificing their permselectivity for CO2/CH4 and CO2/N2 gas pairs.

New Pyridinium Type Poly(Ionic Liquids) as Membranes for CO₂ Separation

New pyridinium based PILs have been prepared by modification of their precursors based on high molecular weight aromatic polyethers bearing main chain pyridine units. The proposed methodology involves the conversion of the precursors to their ionic analogues via N-methylation reaction, followed by anion exchange methathesis reaction to result in PILs with the desirable anions (tetrafluoroborate and bis(trifluoromethylsulfonyl)imide). These PILs show excellent thermal stability, excellent mechanical properties, and most importantly can form very thin, free standing films with minimum thickness of 3 μm. As expected, the PIL containing the TFSI⁻ anion showed improved CO₂ and CH₄ permeabilities compared to its analogue containing the BF₄⁻. PIL-IL composites membranes have also been prepared using the same PIL and different percentages of pyridinium based IL where it was shown that the membrane with the highest IL weight percentage (45 wt %) showed the highest CO₂ permeability (11.8 Barrer) and a high CO₂/CH₄ ideal selectivity of 35 at room temperature.

Frontiers in poly(ionic liquid)s: syntheses and applications

We review recent works on the synthesis and application of poly(ionic liquid)s (PILs). Novel chemical structures, different synthetic strategies and controllable morphologies are introduced as a supplement to PIL systems already reported. The primary properties determining applications, such as ionic conductivity, aqueous solubility, thermodynamic stability and electrochemical/chemical durability, are discussed. Furthermore, the near-term applications of PILs in multiple fields, such as their use in electrochemical energy materials, stimuli-responsive materials, carbon materials, and antimicrobial materials, in catalysis, in sensors, in absorption and in separation materials, as well as several special-interest applications, are described in detail. We also discuss the limitations of PIL applications, efforts to improve PIL physics, and likely future developments.

Functionalized ionic liquid membranes for CO2 separation

It is imperative to develop efficient, reversible and economic technologies for separating CO₂ which mainly comes from flue gas, natural gas and syngas.

Application of polymer-based membranes containing ionic liquids in membrane separation processes: a critical review

The interest in ionic liquids, particularly in polymerizable ionic liquids, is motivated by their unique properties, such as good thermal stability, negligible vapor pressure, and wide electrochemical window. Due to these features ionic liquids were proposed to be used in the membrane separation technology. The utilization of conventional ionic liquids is, however, limited by their release from the membrane during the given separation process. Therefore, the incorporation of polymerizable ionic liquids may overcome this drawback for the industrial application. This work is a comprehensive overview of the advances of ionic liquid membranes for the separation of various compounds, i.e. gases, organic compounds, and metal ions.