Imidazolium-Based Copoly(Ionic Liquid) Membranes for CO2/N2 Separation

Carbon Dioxide Capture by Emerging Innovative Polymers: Status and Perspectives

A significant amount of research has been conducted in carbon dioxide (CO2) capture, particularly over the past decade, and continues to evolve. This review presents the most recent advancements in synthetic methodologies and CO2 capture capabilities of diverse polymer-based substances, which includes the amine-based polymers, porous organic polymers, and polymeric membranes, covering publications in the last 5 years (2019-2024). It aims to assist researchers with new insights and approaches to develop innovative polymer-based materials with improved capturing CO2 capacity, efficiency, sustainability, and cost-effective, thereby addressing the current obstacles in carbon capture and storage to sooner meeting the net-zero CO2 emission target.

Synthesis of poly(ionic liquid-OH) mediated deacetylated chitin and its hydrogels: A study on their applications in controlled release of paracetamol and urea

Due to the biodegradable and biocompatible nature of chitin and chitosan, they are extensively used in the synthesis of hydrogels for various applications. In this work, deacetylation of chitin is carried out with alkaline poly(dimethyldiallylammonium-hydroxide) that gave a higher amount of water-soluble chitin (with 84 % of the degree of deacetylation = chitosan0.84) compared to deacetylation using NaOH. The water-soluble chitosan0.84 is used as intercalating chains for the preparation of acrylic acid and vinylimidazole-based hydrogels. The quaternization of imidazole groups is done with 1,ω-dibromoalkanes, which sets off the crosslinking in the above polymer network. A set of three chitosan0.84 intercalated hydrogels, namely Cs-C4-hydrogel, Cs-C5-hydrogel, and Cs-C10-hydrogel are prepared bearing butyl, pentyl, and decyl chains as respective crosslinkers. The swell ratios of these intercalated hydrogels are compared with those of non-intercalated hydrogels (C4-hydrogel, C5-hydrogel, and C10-hydrogel). Chitosan0.84 intercalated Cs-C10-hydrogel has excellent swelling properties (2330 % swelling ratio) among six synthesized hydrogels. SEM analysis reveals that decyl crosslinker-bearing hydrogels are highly porous. The multi-functionality of Cs-C10-hydrogel and C10-hydrogel is explored towards -the controlled release of paracetamol/urea, and methyleneblue dye absorption. These studies disclose that chitosan0.84 intercalated hydrogels are showing superior-swelling behavior, high paracetamol/urea loading capacities and better dye entrapment than their non-intercalated counterparts.

Preparation and Performance Evaluation of Ionic Liquid Copolymer Shale Inhibitor for Drilling Fluid Gel System

An inhibitor that can effectively inhibit shale hydration is necessary for the safe and efficient development of shale gas. In this study, a novel ionic liquid copolymer shale inhibitor (PIL) was prepared by polymerizing the ionic liquid monomers 1-vinyl-3-aminopropylimidazolium bromide, acrylamide, and methacryloyloxyethyl trimethyl ammonium chloride. The chemical structure was characterized using fourier transform infrared spectroscopy (FT-IR) and hydrogen-nuclear magnetic resonance (H-NMR), and the inhibition performance was evaluated using the inhibition of slurrying test, bentonite flocculation test, linear expansion test, and rolling recovery test. The experimental results showed that bentonite had a linear expansion of 27.9% in 1 wt% PIL solution, 18% lower than that in the polyether amine inhibitor. The recovery rate of shale in 1 wt% PIL was 87.4%. The ionic liquid copolymer could work synergistically with the filtrate reducer, reducing filtration loss to 7.2 mL with the addition of 1%. Mechanism analysis showed that PIL adsorbed negatively charged clay particles through cationic groups, which reduced the electrostatic repulsion between particles. Thus, the stability of the bentonite gel systems was destroyed, and the hydration dispersion and expansion of bentonite were inhibited. PIL formed a hydrophobic film on the surface of clay and prevented water from entering into the interlayer of clay. In addition, PIL lowered the surface tension of water, which prevented the water from intruding into the rock under the action of capillary force. These are also the reasons for the superior suppression performance of PIL.

Recent Advances in Poly(Ionic Liquid)-Based Membranes for CO(2) Separation

Poly(ionic liquid)-based membranes have been the subject of intensive research in the last 15 years due to their potential for the separation of CO₂ from other gases. In this short review, different types of PIL-based membranes for CO₂ separation are described (neat PIL membranes; PIL-IL composite membranes; PIL-polymer blend membranes; PIL-based block copolymer membranes, and PIL-based mixed matrix membranes), and their state-of-the-art separation results for different gas pairs (CO₂/N₂, CO₂/H₂, and CO₂/CH₄) are presented and discussed. This review article is focused on the most relevant research works performed over the last 5 years, that is, since the year 2017 onwards, in the field of poly(ionic liquid)-based membranes for CO₂ separation. The micro- and nano-morphological characterization of the membranes is highlighted as a research topic that requires deeper study and understanding. Nowadays there is an array of advanced structural characterization techniques, such as neutron scattering techniques with contrast variation (using selective deuteration), that can be used to probe the micro- and nanostructure of membranes, in length scales ranging from ~1 nm to ~15 μm. Although some of these techniques have been used to study the morphology of PIL-based membranes for electrochemical applications, their use in the study of PIL-based membranes for CO₂ separation is still unknown.

Surface of CuO Nanoparticles Modified by p-Benzoquinone for N2-Selective Membrane

In this study, CuO nanoparticles and p-benzoquinone (p-BQ) were added to a polyvinylpyrrolidone (PVP) matrix to increase N₂/CO₂ selectivity. The added p-BQ allowed CuO to be distributed in a uniform size in the PVP/CuO composite membrane and the matrix to be flexible by forming the interaction with PVP. The surface modification of CuO by p-BQ and the well-dispersed size affected the increase in the separation performance. The PVP/CuO/p-BQ composite membranes showed an N₂/CO₂ selectivity of about 23.1 with N₂ permeance of about 13.3 GPU, while the separation performance of PVP was not observed. The enhanced separation performance is attributable to the surface of CuO nanoparticles modified by p-BQ inducing CO₂ molecules to be relatively slowly transported by the adsorption properties in the polymer matrix. The chemical properties and coordinative interaction for PVP/CuO/p-BQ composite membrane were measured by FT-IR spectroscopy, thermogravimetric analysis, UV-vis, scanning electron microscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy.

Collaborative Construction of a Silver Nanocluster Fluorescent Probe Using the Pyridinium-Based Ionic Liquid [C4py][DCA]

A silver nanocluster fluorescent probe was synthesized by using the pyridinium-based ionic liquid [C₄py][DCA] as the protective agent, AgNO₃ as the precursor, and NaBH₄ as the reducing agent. The presence of pyridine group enhanced the fluorescence intensity of Ag nanoclusters and facilitated the coordination interaction between Ag nanoclusters and AsO₃ ^3-. Therefore, the collaborative construction of a silver nanocluster probe using the pyridinium-based ionic liquid [C₄py][DCA] offered outstanding selectivity and sensitivity to detect AsO₃ ^3- in water. More interestingly, the fluorescent probe quenched by AsO₃ ^3- could be recovered with the addition of H₂O₂. This fluorescent probe provided a rapid and superior method for the detection of As(III) in the linear concentration range of 0-60 ppb with the lowest detection limit of 0.60 ppb. The mechanism of fluorescence quenching was a static quenching, considered to be due to electron migration between functional groups on the surface of Ag nanoclusters constructed with [C₄py][DCA] and AsO₃ ^3-.

MOF-supported crystalline ionic liquid: new type of solid electrolyte for enhanced and high ionic conductivity

Solid-state electrolyte (SSE) is crucial for a high-performance all-solid-state battery. Here, a new solid sodium electrolyte based on the ionic liquid EIMS-NaTFSI and one metal-organic framework (MOF) UiO-67-MIMS functionalized with zwitterion groups MIMS was obtained (UiO-67 and was assembled with 4,4'-biphenyldicarboxylate linker and cluster Zr₆O₄(OH)₄) (EIMS = 1-(1-ethyl-3-imidazolio)propane-3-sulfonate, NaTFSI = sodium bis(trifluoromethanesulfonyl)imide, MIMS = 1-(1-mthyl-3-imidazolio)propane-3-sulfonate). By contacting and pairing EIMS-NaTFSI (abbreviated as EN-1) to the MIMS group on the framework, EN-1 was directed and arranged along the channels within UiO-67-MIMS, forming a solid composite EN-1@UiO-67-MIMS with Bragg scatter, i.e., a crystalline ionic liquid containing Na⁺ salts (NaTFSI). Such an ionic liquid EN-1@UiO-67-MIMS bearing crystalline MOF matrix showed and preserved fast ion conduction (1.02 × 10^-2 S cm^-1) at 150 °C even after 30 days, and exhibited 1-2 orders of magnitude higher conductivities than the bulk ionic liquid EN-1 within a wide temperature range, although the ion content in the latter was higher. The infinite pathway paved by the EN-1 arranged and contacted the MIMS along the channels within MOF well accounts for the fast ion transmission and the stability of the solid-state electrolyte. Such MOF-based crystalline ionic liquid provides a new strategy for developing high-performance solid-state electrolytes for ions.

High Performance of Ionic-Liquid-Based Materials to Remove Insecticides

Neonicotinoids are systemic insecticides commonly used for pest control in agriculture and veterinary applications. Due to their widespread use, neonicotinoid insecticides (neonics) are found in different environmental compartments, including water, soils, and biota, in which their high toxicity towards non-target organisms is a matter of great concern. Given their widespread use and high toxicity, the development of strategies to remove neonics, while avoiding further environmental contamination is of high priority. In this work, ionic-liquid-based materials, comprising silica modified with tetraalkylammonium cations and the chloride anion, were explored as alternative adsorbent materials to remove four neonics insecticides, namely imidacloprid, acetamiprid, thiacloprid, and thiamethoxam, from aqueous media. These materials or supported ionic liquids (SILs) were first synthesized and chemically characterized and further applied in adsorption studies. It was found that the equilibrium concentration of the adsorbate in the solid phase decreases with the decrease in the SIL cation alkyl chain length, reinforcing the relevance of hydrophobic interactions between ionic liquids (ILs) and insecticides. The best-identified SIL for the adsorption of the studied insecticides corresponds to silica modified with propyltrioctylammonium chloride ([Si][N3888]Cl). The saturation of SILs was reached in 5 min or less, showing their fast adsorption rate towards all insecticides, in contrast with activated carbon (benchmark) that requires 40 to 60 min. The best fitting of the experimental kinetic data was achieved with the Pseudo Second-Order model, meaning that the adsorption process is controlled at the solid-liquid interface. On the other hand, the best fitting of the experimental isotherm data is given by the Freundlich isotherm model, revealing that multiple layers of insecticides onto the SIL surface may occur. The continuous removal efficiency of the best SIL ([Si][N3888]Cl) by solid-phase extraction was finally appraised, with the maximum adsorption capacity decreasing in the following sequence: imidacloprid > thiacloprid > thiamethoxam > acetamiprid. Based on real reported values, under ideal conditions, 1 g of [Si][N3888]Cl is able to treat at least 106 m3 of wastewater and water from wetland contaminated with the studied neonics. In summary, the enhanced adsorption capacity of SILs for a broad diversity of neonics was demonstrated, reinforcing the usefulness of these materials for their removal from aqueous matrices and thus contributing to preventing their introduction into the ecosystems and reducing their detrimental effects in the environment and human health.

Emerging iongel materials towards applications in energy and bioelectronics

In the past two decades, ionic liquids (ILs) have blossomed as versatile task-specific materials with a unique combination of properties, which can be beneficial for a plethora of different applications. The additional need of incorporating ILs into solid devices led to the development of a new class of ionic soft-solid materials, named here iongels. Nowadays, iongels cover a wide range of materials mostly composed of an IL component immobilized within different matrices such as polymers, inorganic networks, biopolymers or inorganic nanoparticles. This review aims at presenting an integrated perspective on the recent progress and advances in this emerging type of material. We provide an analysis of the main families of iongels and highlight the emerging types of these ionic soft materials offering additional properties, such as thermoresponsiveness, self-healing, mixed ionic/electronic properties, and (photo)luminescence, among others. Next, recent trends in additive manufacturing (3D printing) of iongels are presented. Finally, their new applications in the areas of energy, gas separation and (bio)electronics are detailed and discussed in terms of performance, underpinning it to the structural features and processing of iongel materials.

Recent advances in ionic liquids-based hybrid processes for CO2 capture and utilization

CO₂ capture and utilization (CCU) is an effective strategy to mitigate global warming. Absorption, adsorption and membranes are methods used for CO₂ separation and capture, and various catalytic pathways have also been developed for CO₂ utilization. Although widely researched and used in industry, these processes are energy-intensive and this challenge needs to be overcome. To realize further optimization, novel materials and processes are continuously being developed. New generation materials such as ionic liquids (ILs) have shown promising potential for cost-effective CO₂ capture and utilization. This study reviews the current status of ILs-based solvents, adsorbents, membranes, catalysts and their hybrid processes for CO₂ capture and utilization. The special properties of ILs are integrated into new materials through hybridization, which significantly improves the performance in the process of CCU.

Influence of ionic liquid-like cationic pendants composition in cellulose based polyelectrolytes on membrane-based CO2 separation

Cellulose acetate (CA) is an attractive membrane polymer for CO₂ capture market. However, its low CO₂ permeability hampers its application as part of a membrane for most relevant types of CO₂ containing feeds. This work investigates the enhancement of CA separation performance by incorporating ionic liquid-like pendants (1-methylimidazol, 1-methylpyrrolidine, and 2-hydroxyethyldimethylamine (HEDMA) on the CA backbone. These CA-based polyelectrolytes (PEs), synthesised by covalent grafting of cationic pendants with anion metathesis, were characterised by NMR, FTIR, DSC/TGA, and processed into thin-film composite membranes. The membrane performance in CO₂/N₂ mixed-gas permeation experiments shows a decrease in CO₂ and N₂ permeability and an initial decrease and then gradual increase in CO₂/N₂ selectivity with increasing HEDMA content. The amount of HEDMA attached to the CA backbone determines overall separation process in bifunctional PEs. This indicates that the hydroxy-substituted cationic pendants alter interactions between PEs network and permeating CO₂ molecules, suggesting possibilities for further improvements.

Efficient CO2 Separation of Multi-Permselective Mixed Matrix Membranes with a Unique Interfacial Structure Regulated by Mesoporous Nanosheets

A facile strategy to elevate gas separation performances of polymers is to introduce a versatile particle. In this study, the novel F-Ce nanosheets are synthesized, and then F-Ce is functionalized with 1-ethyl-3-methylimidazole thiocyanate (ionic liquids, ILs), obtaining multifunctional f-F-Ce nanosheets by the facile and environment-friendly methods. The multifunctional f-F-Ce nanosheets are incorporated into the Pebax (Pebax 1657) matrix to fabricate mixed matrix membranes (MMMs) for efficient CO₂ separation. The f-F-Ce nanosheets play versatile parts in elevating membrane gas separation performance. On the one hand, f-F-Ce tends to arrange horizontally and constructs a unique interfacial structure for cross-layer CO₂ transport in MMMs. On the other hand, the abundant mesopores from f-F-Ce construct high-speed CO₂ transport channels in MMMs and notably elevate the gas permeability. Moreover, the as-prepared MMMs separate CO₂ efficiently due to the comprehensive improvements of diffusivity selectivity, solubility selectivity, and reactivity selectivity. First, the high aspect ratio of f-F-Ce provides the tortuous pathways for gas transport and generates the rigid interface between the Pebax matrix and f-F-Ce nanosheets, increasing the diffusivity selectivity. Second, SCN^- groups from ILs show excellent affinity to CO₂, enhancing the solubility selectivity. Third, amine groups from ILs with abundant methylimidazole generate reversible reaction with CO₂ to elevate reactivity selectivity. Consequently, the f-F-Ce-doped MMMs display excellent CO₂ permeability and CO₂/CH₄ selectivity. In particular, the MMM incorporated with 8 wt % f-F-Ce displays a CO₂ permeability of 1823 Barrer and a CO₂/CH₄ selectivity of 35, overcoming the Robeson upper bound line (2008).

Top-Down Polyelectrolytes for Membrane-Based Post-Combustion CO2 Capture

Polymer-based CO2 selective membranes offer an energy efficient method to separate CO2 from flue gas. `Top-down' polyelectrolytes represent a particularly interesting class of polymer materials based on their vast synthetic flexibility, tuneable interaction with gas molecules, ease of processability into thin films, and commercial availability of precursors. Recent developments in their synthesis and processing are reviewed herein. The four main groups of post-synthetically modified polyelectrolytes discern ionised neutral polymers, cation and anion functionalised polymers, and methacrylate-derived polyelectrolytes. These polyelectrolytes differentiate according to the origin and chemical structure of the precursor polymer. Polyelectrolytes are mostly processed into thin-film composite (TFC) membranes using physical and chemical layer deposition techniques such as solvent-casting, Langmuir-Blodgett, Layer-by-Layer, and chemical grafting. While solvent-casting allows manufacturing commercially competitive TFC membranes, other methods should still mature to become cost-efficient for large-scale application. Many post-synthetically modified polyelectrolytes exhibit outstanding selectivity for CO2 and some overcome the Robeson plot for CO2/N2 separation. However, their CO2 permeance remain low with only grafted and solvent-casted films being able to approach the industrially relevant performance parameters. The development of polyelectrolyte-based membranes for CO2 separation should direct further efforts at promoting the CO2 transport rates while maintaining high selectivities with additional emphasis on environmentally sourced precursor polymers.