Enhanced Activity of Small Pt Nanoparticles Decorated with High-Loading Single Fe─N4 for Methanol Oxidation and Oxygen Reduction via the Assistive Active Sites Strategy

Decorating platinum (Pt) with a single atom offers a promising approach to tailoring their catalytic activity. In this study, for the first time, an innovative assistive active sites (AAS) strategy is proposed to construct high-loading (3.46wt.%) single Fe─N4 as AAS, which are further hybridized with small Pt nanoparticles to enhance both oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) activities. For ORR, the target catalyst (Pt/HFeSA-HCS) exhibits a higher mass activity (MA) of 0.98 A mgPt -1 and specific activity (SA) of 1.39 mA cmPt -2 at 0.90 V versus RHE. As for MOR, Pt/HFeSA-HCS shows exceptional MA (3.21 A mgPt -1) and SA (4.27 mA cmPt -2) at peak values, surpassing commercial Pt/C by 15.3 and 11.5 times, respectively. The underlying mechanism behind this AAS strategy is to find that in MOR, Fe─N4 promotes water dissociation, generating more *OH to accelerate the conversion of *CO to CO2. Meanwhile, in ORR, Fe─N4 acts as a competitor to adsorb *OH, weakening Pt─OH bonding and facilitating desorption of *OH on the Pt surface. Constructing AAS that can enhance dual functionality simultaneously can be seen as a successful "kill two birds with one stone" strategy.

Nanofibrous Porous Organic Polymers and Their Derivatives: From Synthesis to Applications

Engineering porous organic polymers (POPs) into 1D morphology holds significant promise for diverse applications due to their exceptional processability and increased surface contact for enhanced interactions with guest molecules. This article reviews the latest developments in nanofibrous POPs and their derivatives, encompassing porous organic polymer nanofibers, their composites, and POPs-derived carbon nanofibers. The review delves into the design and fabrication strategies, elucidates the formation mechanisms, explores their functional attributes, and highlights promising applications. The first section systematically outlines two primary fabrication approaches of nanofibrous POPs, i.e., direct bulk synthesis and electrospinning technology. Both routes are discussed and compared in terms of template utilization and post-treatments. Next, performance of nanofibrous POPs and their derivatives are reviewed for applications including water treatment, water/oil separation, gas adsorption, energy storage, heterogeneous catalysis, microwave absorption, and biomedical systems. Finally, highlighting existent challenges and offering future prospects of nanofibrous POPs and their derivatives are concluded.

Covalent Organic Frameworks for Water Harvesting from Air

Despite approximately 70 % of the earth being covered by water, water shortage has emerged as an urgent social challenge. Sorbent-based atmospheric water harvesting stands out as a potent approach to alleviate the situation, particularly in arid regions. This method requires adsorbents with ample working capacity, rapid kinetics, low energy costs, and long-term stability under operating conditions. Covalent organic frameworks (COFs) are a novel class of crystalline porous materials and offer distinct advantages due to their high specific surface area, structural diversity, and robustness. These properties enable the rational design and customization of their water-harvesting capabilities. Herein, the basic concepts about the water sorption process within COFs, including the parameters that qualitatively or quantitatively describe their water isotherms and the mechanism are summarized. Then, the recent methods used to prepare COFs-based water harvesters are reviewed, emphasizing the structural diversity of COFs and presenting the common empirical understandings of these endeavors. Finally, challenges and research concepts are proposed to help develop next-generation COFs-based water harvesters.

Porous organic polymers-based fluorescent chemosensors for Fe(III) ions-a functional mimic of siderophores

Extended organic polymers such as amorphous Covalent Organic Polymers (COPs) and crystalline Covalent Organic Frameworks (COFs) are emerging functional polymeric materials that have recently been shown promises as luminescent materials for chemosensing applications. A wide variety of luminescence COPs and COFs have been synthesized and successfully used as fluorescence-sensing materials for hazardous environmental pollutants and toxic contaminants. This review exemplifies various COPs and COFs-based fluorescence sensors for selective sensing of Fe(III) ions. The fluorescence sensors are sorted according to their structural features and each section provides a detailed discussion on the synthesis and fluorescence sensing ability of different COPs and COFs towards Fe(III) ions. Also, this review highlights the limitations of the existing organic polymer-based chemosensors and future perspectives on translating COPs and COFs-based fluorescence sensors for the practical detection of Fe(III) ions.

Azo-Linked Porous Polycalix[n]arenes for the Efficient Removal of Organic Micropollutants from Water

Developing novel porous adsorbents for efficient wastewater treatment is significant to the environment protection. Herein, three porous polycalix[n]arenes (n = 4, 6, and 8) which had varying cavity sizes of the macrocycle (Azo-CX4P, Azo-CX6P, and Azo-CX8P) were prepared under mild conditions and tested for their potential application in water purification. Azo-CX8P with a larger cavity size of the macrocycle outperformed Azo-CX4P and Azo-CX6P in screening studies involving a range of organic micropollutants. It was proved that Azo-CX8P was especially efficient in the removal of cationic dyes because of its high negative surface charge. In terms of the adsorption of Rhodamine B with Azo-CX8P, the pseudo-second-order rate constant reaches 5.025 g·mg-1·min-1 with the maximum adsorption capacity being 1345 mg·g-1. These values are significantly higher compared with those recorded for most adsorbents. In addition, the easily prepared Azo-CX8P can be reused at least six times without a loss of the adsorption efficiency, demonstrating its potential use in water purification.

Two-Dimensional Covalent Organic Frameworks as Tailor-Made Scaffolds for Water Harvesting

Developing materials to harvest water from the air is of great importance to alleviate the water shortage for people living in arid regions, where the annual average relative humidity (RH) is lower than 0.4. In this work, we report a general nitrogen atom incorporation strategy to prepare high-performance covalent organic frameworks (COFs) for water harvesting from the air in arid areas. A series of COFs, namely COF-W1, COF-W2, and COF-W3 were developed for this purpose. Different contents of nitrogen were embedded into COFs by incorporating pyridine units into the building blocks. With the increasing content of nitrogen from COF-W1 to COF-W3, the inflection points of their water isotherms shift distinctly from RH values from 0.65 to 0.25. Significantly, COF-W3 exhibits the lowest inflection point at a low RH value of 0.25 and reaches a high uptake capacity of 0.28 g g-1 at 25 °C with a low hysteresis loop. Moreover, the gram-scale COF-W3 retains its high performance, which renders it more attractive in water harvesting. This work demonstrates the feasibility of this nitrogen incorporation strategy to acquire high-performance COFs as water harvesters in the future.

Reusable Zwitterionic Porous Organic Polymers for Bilirubin Removal in Serum

Herein, we report a straightforward strategy to construct reusable, hemocompatible, and highly efficient bilirubin adsorbents by installing zwitterionic modules into a porous organic polymer (POP) for hemoperfusion application. Three types of zwitterions with different amounts are used to evaluate their impacts on the characteristics of POPs, including carboxybetaine methacrylate (CB), sulfobetaine methacrylate (SB), and 2-methacryloyloxyethyl phosphorylcholine (MPC). Results show that zwitterions can improve hemocompatibility, hydrophilicity, and bilirubin uptake of the POP. Among all zwitterionic POPs, POP-CB-40% exhibits the best bilirubin uptake, ∼46.5 times enhancement compared with the non-zwitterionic POP in 100% serum. This enhancement can be attributed to the improved hydrophilicity and protein resistance ability in biological solutions. More importantly, the reusability test shows that POP-CB-40% maintains ∼99% of bilirubin uptake capacity at fifth recycling in 100% serum. Findings in this work provide a guideline for the design of biocompatible and efficient POP-based bilirubin adsorbents for hemoperfusion therapy.

Porous Organic Polymers as Active Electrode Materials for Energy Storage Applications

Eco-friendly and efficient energy production and storage technologies are highly demanded to address the environmental and energy crises. Porous organic polymers (POPs) are a class of lightweight porous network materials covalently linked by organic building blocks, possessing high surface areas, tunable pores, and designable components and structures. Due to their unique structural and compositional advantages, POPs have recently emerged as promising electrode materials for energy storage devices, particularly in the realm of supercapacitors and ion batteries. In this work, a comprehensive overview of recent progress and applications of POPs as electrode materials in energy storage devices, including the structural features and synthesis strategies of various POPs, as well as their applications in supercapacitors, lithium batteries, sodium batteries, and potassium batteries are provided. Finally, insights are provided into the future research directions of POPs in electrochemical energy storage technologies. It is anticipated that this work can provide readers with a comprehensive background on the design of POPs-based electrode materials and ignite more research in the development of next-generation energy storage devices.

Trapping Halogen Anions in Cationic Viologen Porous Organic Polymers for Highly Cycling-Stable Cathode Materials

Halogens, especially Br2 and I2 , as cathode materials for lithium-ion batteries exhibit high energy density with low cost, but poor cycling performance due to their high solubility in electrolyte solution. Herein, viologen-based cationic porous organic polymers (TpVXs, X = Cl, Br, or I) with abundant pores and ionic redox-active moieties are designed to immobilize halogen anions stoichiometrically. TpVBr and TpVI electrodes exhibit high initial specific capacity (116 and 132 mAh g-1 at 0.2 C) and high average discharge voltage (≈3.0 V) without any host materials. Notably, benefiting from the porous and ionic structure, TpVBr and TpVI present excellent long-term cycling stability (86% and 98% capacity retention after 600 cycles at 0.5 C), which are far superior to those of the state-of-the-art halogen electrodes. In addition, the charge storage mechanism is investigated by in situ Raman and ex situ X-ray photoelectron spectroscopy.

Building Porous Ni(Salen)-Based Catalysts from Waste Styrofoam via Autocatalytic Coupling Chemistry for Heterogeneous Oxidation with Molecular Oxygen

The development of robust and industrially viable catalysts from plastic waste is of great significance, and the facile construction of high performance heterogeneous catalyst systems for phenol-quinone conversions remains a grand challenge. Herein, a feasible strategy is demonstrated to reclaim Styrofoam into hierarchically porous nickel-salen-loaded hypercrosslinked polystyrene (PS@Ni-salen) catalysts with high activities through an unusual autocatalytic coupling route. The salen is immobilized onto PS chain by Friedel-Crafts alkylation of benzyl chloride derivatives, and the generated hydrogen chloride coordinately promotes the simultaneous crosslinking and bridge formation between aromatic rings via a Scholl coupling route, leading to hierarchically porous networks. After the metallization with Ni, the resultant networks exhibit high catalytic activity for the oxidation of 2,3,6-trimethylphenol to 2,3,5-trimethyl-1,4-benzoquinone under mild conditions (303 K, 1 bar of O2 ). This catalyst also demonstrates attractive recycling performance without an obvious loss of catalytic efficiency over five consecutive cycles. This methodology might provide a potential sustainable alternative to construct environmentally benign and cost-effective catalysts for specific organic transformation.

Construction of N-Rich Aminal-Linked Porous Organic Polymers for Outstanding Precombustion CO2 Capture and H2 Purification: A Combined Experimental and Theoretical Study

A large number of scientific investigations are needed for developing a sustainable solid sorbent material for precombustion CO2 capture in the integrated gasification combined cycle (IGCC) that is accountable for the industrial coproduction of hydrogen and electricity. Keeping in mind the industrially relevant conditions (high pressure, high temperature, and humidity) as well as good CO2/H2 selectivity, we explored a series of sorbent materials. An all-rounder player in this game is the porous organic polymers (POPs) that are thermally and chemically stable, easily scalable, and precisely tunable. In the present investigation, we successfully synthesized two nitrogen-rich POPs by extended Schiff-base condensation reactions. Among these two porous polymers, TBAL-POP-2 exhibits high CO2 uptake capacity at 30 bar pressure (57.2, 18.7, and 15.9 mmol g-1 at 273, 298, and 313 K temperatures, respectively). CO2/H2 selectivities of TBAL-POP-1 and 2 at 25 °C are 434.35 and 477.93, respectively. On the other hand, at 313 K the CO2/H2 selectivities of TBAL-POP-1 and 2 are 296.92 and 421.58, respectively. Another important feature to win the race in the search of good sorbents is CO2 capture capacity at room temperature, which is very high for TBAL-POP-2 (15.61 mmol g-1 at 298 K for 30 to 1 bar pressure swing). High BET surface area and good mesopore volume along with a large nitrogen content in the framework make TBAL-POP-2 an excellent sorbent material for precombustion CO2 capture and H2 purification.

Novel Porous Organic Polymer Catalyst with Phosphate and Sulfonic Acid Sites for Facile Esterification of Levulinic Acid

Biomass-derived value-added materials such as levulinic acid (LA) are favorable natural resources for producing ester-based biolubricants owing to their biodegradability, nontoxicity, and excellent metal-adhering properties. However, highly active catalysts must be developed to carry out efficient esterification of LA with aliphatic alcohols, especially long-chain aliphatic alcohols. In this study, we developed a novel porous covalent organic polymer catalyst (BPOP-SO3H) with dual acid sites, phosphate and sulfonic acid sites, for the esterification of LA. The prepared BPOP-SO3H catalyst was verified using various surface analysis techniques. BPOP-SO3H exhibited 98% LA conversion with n-butanol and 99% selectivity for butyl levulinate ester within 30 min, which is superior to that of most reported catalysts. BPOP-SO3H also showed high LA conversion and ester selectivity when other aliphatic alcohols were used. Moreover, BPOP-SO3H showed good recyclability for five consecutive cycles. We believe that incorporating a high density of acid sites into a porous polymer with a large surface area and hierarchical pores is a promising approach for developing heterogeneous acid catalysts for the production of alkyl levulinate esters from LA.

Porous Supramolecular Assemblies for Efficient Suzuki Coupling of Aryl Chlorides

The development of catalytic systems that can activate aryl chlorides for palladium-catalyzed cross-coupling reactions is at the forefront of ongoing efforts to synthesize fine chemicals. In this study, a facile ligand-template approach is adopted to achieve active-site encapsulation by forming supramolecular assemblies; this bestowed the pristine inert counterparts with reactivity, which is further increased upon the construction of a porous framework. Experimental results indicated that the isolation of ligands by the surrounding template units is key to the formation of catalytically active monoligated palladium complexes. Additionally, the construction of porous frameworks using the resulting supramolecular assemblies prevented the decomposition of the Pd complexes into nanoparticles, which drastically increased the catalyst lifetime. These findings, along with the simplicity and generality of the synthesis scheme, suggest that the strategy can be leveraged to achieve unique reactivity and potentially enable fine-chemical synthesis.

Catechol-Based Porous Organic Polymers for Effective Removal of Phenolic Pollutants from Water

Phenolic pollutants released from industrial activities seriously damage natural freshwater resources, and their elimination or reduction to safe levels is an urgent challenge. In this study, three catechol-based porous organic polymers, CCPOP, NTPOP, and MCPOP, were prepared using sustainable lignin biomass-derived monomers for the adsorption of phenolic contaminants in water. CCPOP, NTPOP, and MCPOP showed good adsorption performance for 2,4,6-trichlorophenol (TCP) with theoretical maximum adsorption capacities of 808.06 mg/g, 1195.30 mg/g, and 1076.85 mg/g, respectively. In addition, MCPOP maintained a stable adsorption performance after eight consecutive cycles. These results indicate that MCPOP is a potential material for the effective treatment of phenol pollutants in wastewater.

Recent Advances in the Use of Covalent Organic Frameworks as Heterogenous Photocatalysts in Organic Synthesis

Organic photochemistry is intensely developed in the 1980s, in which the nature of excited electronic states and the energy and electron transfer processes are thoroughly studied and finally well-understood. This knowledge from molecular organic photochemistry can be transferred to the design of covalent organic frameworks (COFs) as active visible-light photocatalysts. COFs constitute a new class of crystalline porous materials with substantial application potentials. Featured with outstanding structural tunability, large porosity, high surface area, excellent stability, and unique photoelectronic properties, COFs are studied as potential candidates in various research areas (e.g., photocatalysis). This review aims to provide the state-of-the-art insights into the design of COF photocatalysts (pristine, functionalized, and hybrid COFs) for organic transformations. The catalytic reaction mechanism of COF-based photocatalysts and the influence of dimensionality and crystallinity on heterogenous photocatalysis performance are also discussed, followed by perspectives and prospects on the main challenges and opportunities in future research of COFs and COF-based photocatalysts.

Molecular Design of Porous Organic Polymer-Derived Carbonaceous Electrocatalysts for Pinpointing Active Sites in Oxygen Reduction Reaction

The widespread application of fuel cells is hampered by the sluggish kinetics of the oxygen reduction reaction (ORR), which traditionally necessitates the use of high-cost platinum group metal catalysts. The indispensability of these metal catalysts stems from their ability to overcome kinetic barriers, but their high cost and scarcity necessitate alternative strategies. In this context, porous organic polymers (POPs), which are built up from the molecular level, are emerging as promising precursors to produce carbonaceous catalysts owning to their cost-effectiveness, high electrical conductivity, abundant active sites and extensive surface area accessibility. To enhance the intrinsic ORR activity and optimize the performance of these electrocatalysts, recognizing, designing, and increasing the density of active sites are identified as three crucial steps. These steps, which form the core of our review, serve to elucidate the link between the material structure design and ORR performance evaluation, thereby providing valuable insights for ongoing research in the field. Leveraging the precision of polymer skeletons based on molecular units, POP-derived carbonaceous catalysts provide an excellent platform for in-depth exploration of the role and working mechanism for the specific active site during the ORR process. In this review, the recent advances pertaining to the synthesis techniques and electrochemical functions of various types of active sites, pinpointed from POPs, are systematically summarized, including heteroatoms, surficial substituents and edge/defects. Notably, the structure-property relationship, between these active sites and ORR performance, are discussed and emphasized, which creates guidelines to shed light on the design of high-performance ORR electrocatalysts.

Carbonized Aminal-Linked Porous Organic Polymers Containing Pyrene and Triazine Units for Gas Uptake and Energy Storage

Porous organic polymers (POPs) have plenteous exciting features due to their attractive combination of microporosity with π-conjugation. Nevertheless, electrodes based on their pristine forms suffer from severe poverty of electrical conductivity, precluding their employment within electrochemical appliances. The electrical conductivity of POPs may be significantly improved and their porosity properties could be further customized by direct carbonization. In this study, we successfully prepared a microporous carbon material (Py-PDT POP-600) by the carbonization of Py-PDT POP, which was designed using a condensation reaction between 6,6'-(1,4-phenylene)bis(1,3,5-triazine-2,4-diamine) (PDA-4NH₂) and 4,4',4'',4'''-(pyrene-1,3,6,8-tetrayl)tetrabenzaldehyde (Py-Ph-4CHO) in the presence of dimethyl sulfoxide (DMSO) as a solvent. The obtained Py-PDT POP-600 with a high nitrogen content had a high surface area (up to 314 m² g^-1), high pore volume, and good thermal stability based on N₂ adsorption/desorption data and a thermogravimetric analysis (TGA). Owing to the good surface area, the as-prepared Py-PDT POP-600 showed excellent performance in CO₂ uptake (2.7 mmol g^-1 at 298 K) and a high specific capacitance of 550 F g^-1 at 0.5 A g^-1 compared with the pristine Py-PDT POP (0.24 mmol g^-1 and 28 F g^-1).

Triazine-Based Porous Organic Polymers: Synthesis and Application in Dye Adsorption and Catalysis

The scientific community has been developing promising materials to increase the sustainability and efficiency of production processes and pollutant environmental remediation strategies. Porous organic polymers (POPs) are of special interest, as they are insoluble custom-built materials at the molecular level, endowed with low densities and high stability, surface areas, and porosity. This paper describes the synthesis, characterization, and performance of three triazine-based POPs (T-POPs) in dye adsorption and Henry reaction catalysis. T-POPs were prepared by a polycondensation reaction between melamine and a dialdehyde (terephthalaldehyde (T-POP1) or isophthalaldehyde derivatives with a hydroxyl group (T-POP2) or both a hydroxyl and a carboxyl group (T-POP3)). The crosslinked and mesoporous polyaminal structures, with surface areas between 139.2 and 287.4 m² g^-1, positive charge, and high thermal stability, proved to be excellent methyl orange adsorbents, removing the anionic dye with an efficiency >99% in just 15-20 min. The POPs were also effective for methylene blue cationic dye removal from water, reaching efficiencies up to ca. 99.4%, possibly due to favorable interactions via deprotonation of T-POP3 carboxyl groups. The modification of the most basic polymers, T-POP1 and T-POP2, with copper(II) allowed the best efficiencies in Henry reactions catalysis, leading to excellent conversions (97%) and selectivities (99.9%).

Porous Organic Polymer with Hierarchical Structure and Limited Volume Expansion for Ultrafast and Highly Durable Sodium Storage

Sustainable organic electrode materials, as promising alternatives to conventional inorganic electrode materials for sodium-ion batteries (SIBs), are still challenging to realize long-lifetime and high-rate batteries because of their poor conductivity, limited electroactivity, and severe dissolution. It is also urgent to deeply reveal their electrochemical mechanism and evolution processes. A porous organic polymer (POP) with a conjugated and hierarchical structure is designed and synthesized here. The unique molecule and structure endow the POP with electron delocalization, high ionic diffusivity, plentiful active sites, exceptional structure stability, and limited solubility in electrolytes. When evaluated as an anode for SIBs, the POP exhibits appealing electrochemical properties regarding reversible capacity, rate behaviors, and long-duration life. Importantly, using judiciously combined experiments and theoretical computation, including in situ transmission electron microscopy (TEM), and ex situ spectroscopy, we reveal the Na-storage mechanism and dynamic evolution processes of the POP, including 12-electron reaction process with Na, low volume expansion (125-106% vs the initial 100%), and stable composition and structure evolution during repeating sodiation/de-sodiation processes. This quantitative design for ultrafast and highly durable sodium storage in the POP could be of immediate benefit for the rational design of organic electrode materials with ideal electrochemical properties.

Quinoid-Thiophene-Based Covalent Organic Polymers for High Iodine Uptake: When Rational Chemical Design Counterbalances the Low Surface Area and Pore Volume

A novel 2D covalent organic polymer (COP), based on conjugated quinoid-oligothiophene (QOT) and tris(aminophenyl) benzene (TAPB) moieties, is designed and synthesized (TAPB-QOT COP). Some DFT calculations are made to clarify the equilibrium between different QOT isomers and how they could affect the COP formation. Once synthetized, the polymer has been thoroughly characterized by spectroscopic (i.e., Raman, UV-vis), SSNMR and surface (e.g., SEM, BET) techniques, showing a modest surface area (113 m² g^-1) and micropore volume (0.014 cm³ g^-1 with an averaged pore size of 5.6-8 Å). Notwithstanding this, TAPB-QOT COP shows a remarkably high iodine (I₂) uptake capacity (464 %wt) comparable to or even higher than state-of-the-art porous organic polymers (POPs). These auspicious values are due to the thoughtful design of the polymer with embedded sulfur sites and a conjugated scaffold with the ability to counterbalance the relatively low pore volumes. Indeed, both morphological and Raman data, supported by computational analyses, prove the very high affinity between the S atom in our COP and the I₂. As a result, TAPB-QOT COP shows the highest volumetric I₂ uptake (i.e., the amount of I₂ uptaken per volume unit) up to 331 g cm^-3 coupled with a remarkably high reversibility (>80% after five cycles).

Isometric Covalent Triazine Framework-Derived Porous Carbons as Metal-Free Electrocatalysts for the Oxygen Reduction Reaction

Covalent triazine frameworks (CTFs) and their derivative N-doped carbons have attracted much attention for application in energy conversion and storage. However, previous studies have mainly focused on developing new building blocks and optimizing synthetic conditions. The use of isometric building blocks to control the porous structure and to fundamentally understand structure-property relationships have rarely been reported. In this work, two isometric building blocks are used to produce isometric CTFs with controllable pore geometries. The as-prepared CTF with nonplanar hexagonal rings demonstrates higher surface area, larger pore volume, and richer N content than the planar CTF. After pyrolysis, nonplanar porous CTF-derived N-doped carbons exhibit admirable catalytic activity for oxygen reduction in alkaline media (half-wave potential: 0.86 V; Tafel slope: 65 mV dec^-1 ), owing to their larger pore volume and the abundance of pyridinic and graphitic N species. When assembled into a zinc-air battery, the as-made electrocatalysts show high capacities of up to 651 mAh g^-1 and excellent durability.

Fluorine-Functionalized Triazine-Based Porous Organic Polymers for the Efficient Adsorption of Aflatoxins

Food safety issue caused by aflatoxins has aroused widespread concern in society. Herein, a novel fluorine-functionalized triazine-based porous organic polymer (F-POP) was developed for the first time by the simple condensation polymerization of 2,2'-bis(trifluoromethyl)benzidine and cyanuric chloride. With in-built fluorine functional group (F) and imine group (-NH-), F-POP displayed significantly superior adsorption ability for aflatoxins, outperforming fluorine-free POP due to the multiple interaction mechanisms of hydrogen bond, F-O interaction, π-π interaction, F-π interaction, and hydrophobic interaction. Thus, magnetic F-POP was prepared by introducing Fe₃O₄ into F-POP and then utilized as a magnetic sorbent for the extraction of trace aflatoxins in peanut and rice samples prior to high-performance liquid chromatography-fluorescence detection. Under the optimal conditions, the proposed method presented high sensitivity with the limit of detections at 0.005-0.15 ng g^-1. F-POP also exhibited outstanding adsorption capability for many other organic pollutants, revealing its great potential for analysis or adsorption applications.

Synthesis of Pillar[5]arene- and Phosphazene-Linked Porous Organic Polymers for Highly Efficient Adsorption of Uranium

It is crucial to design efficient adsorbents for uranium from natural seawater with wide adaptability, effectiveness, and environmental safety. Porous organic polymers (POPs) provide superb tunable porosity and stability among developed porous materials. In this work, two new POPs, i.e., HCCP-P5-1 and HCCP-P5-2 were rationally designed and constructed by linked with macrocyclic pillar[5]arene as the monomer and hexachlorophosphate as the core via a macrocycle-to-framework strategy. Both pillar[5]arene-containing POPs exhibited high uranium adsorption capacity compared with previously reported macrocycle-free counterparts. The isothermal adsorption curves and kinetic studies showed that the adsorption of POPs on uranium was consistent with the Langmuir model and the pseudo-second-order kinetic model. Especially, HCCP-P5-1 has reached 537.81 mg/g, which is greater than most POPs that have been reported. Meanwhile, the comparison between both HCCP-P5-1 and HCCP-P5-2 can illustrate that the adsorption capacity and stability could be adjusted by the monomer ratio. This work provides a new idea for the design and construction of uranium adsorbents from macrocycle-derived POPs.

Carbon-Carbon Linked Organic Frameworks: An Explicit Summary and Analysis

Organic frameworks with carbon-carbon (CC) linkage are an important class of materials owing to their outstanding chemical stability and extended π-electron delocalization resulting in unique optoelectronic properties. In the first part of this review article, the design principles for the bottom-up synthesis of 2D and 3D sp/sp² CC linked organic frameworks are summarized. Representative reaction methodologies, such as Knoevenagel condensation, Aldol condensation, Horner-Wadsworth-Emmons reaction, Wittig reaction, and coupling reactions (Ullmann, Suzuki, Heck, Yamamoto, etc.) are included. This is discussed in the context of their reaction mechanism, reaction dynamics, and whether and why resulting in an amorphous or crystalline product. This is followed by a discussion of different state-of-the art bottom-up synthesis methodologies, like solvothermal, interfacial, and solid-state synthesis. In the second part, the structure-property relationships in CC linked organic frameworks with representative examples of organocatalysis, photo(electro)catalysis, energy storage and conversion, magnetism, and molecular storage and separation are analyzed. The importance of linkage type, building blocks, topology, and crystallinity of the framework material in connection with the structure-property relationship is highlighted. Finally, brief concluding remarks are presented based on the key development of bottom-up synthetic methods and provide perspectives for future development in this field.

Synthesis and Characterization of Benzene- and Triazine-Based Azo-Bridged Porous Organic Polymers

Porous organic polymers incorporating nitrogen-rich functionalities have recently emerged as promising materials for efficient and highly selective CO₂ capture and separation. Herein, we report synthesis and characterization of new two-dimensional (2D) benzene- and triazine-based azo-bridged porous organic polymers. Different synthetic approaches towards the porous azo-bridged polymers were tested, including reductive homocoupling of aromatic nitro monomers, oxidative homocoupling of aromatic amino monomers and heterocoupling of aromatic nitro monomers and a series of aromatic diamines of different lengths and rigidity. IR spectroscopy, ¹³C CP/MAS NMR spectroscopy, powder X-ray diffraction, elemental analysis, thermogravimetric analysis, nitrogen adsorption-desorption experiments and computational study were used to characterize structures and properties of the resulting polymers. The synthesized azo-bridged polymers are all amorphous solids of good thermal stability, exhibiting various surface areas (up to 351 m² g^-1). The obtained results indicated that the synthetic methods and building units have a pronounced effect on the porosity of the final materials. Reductive and oxidative homocoupling of aromatic nitro and amino building units, respectively, lead to 2D azo-bridged polymers of substantially higher porosity when compared to those produced by heterocoupling reactions. Periodic DFT calculations and Grand-canonical Monte Carlo (GCMC) simulations suggested that, within the used approximations, linear linkers of different lengths do not significantly affect CO₂ adsorption properties of model azo-bridged polymers.

Microporous Polymelamine Framework Functionalized with Re(I) Tricarbonyl Complexes for CO2 Absorption and Reduction

A mixture of polymeric complexes based on the reaction between Re(CO)₅Cl and the porous polymeric network coming from the coupling of melamine and benzene-1,3,5-tricarboxaldehyde was obtained and characterized by FTIR, NMR, SEM, XPS, ICP, XRD, and cyclic voltammetry (CV). The formed rhenium-based porous hybrid material reveals a noticeable capability of CO₂ absorption. The gas absorption amount measured at 295 K was close to 44 cm³/g at 1 atm. An interesting catalytic activity for CO₂ reduction reaction (CO₂RR) is observed, resulting in a turn over-number (TON) close to 6.3 under 80 min of test at -1.8 V vs. Ag/AgCl in a TBAPF₆ 0.1 M ACN solution. A possible use as filler in membranes or columns can be envisaged.

Degradable Multifunctional Porphyrin-Based Porous Organic Polymer Nanosonosensitizer for Tumor-Specific Sonodynamic, Chemo- and Immunotherapy

Sonodynamic therapy (SDT) benefiting from its intrinsic merits, such as noninvasiveness and deep tissue penetrability, is receiving increasing considerable attention in reactive oxygen species (ROS)-based tumor treatment. However, current sonosensitizers usually suffer from low tumor lesion accumulation, insufficient ROS generation efficiency under ultrasound, and non-biodegradability, which seriously impede the therapeutic outcomes. Additionally, it is difficult that SDT alone can completely eradicate tumors because of the complex and immunosuppressive tumor microenvironment (TME). Herein, we simultaneously employ sonosensitive porphyrin building blocks and glutathione (GSH)-responsive disulfide bonds to construct a novel degradable multifunctional porphyrin-based hollow porous organic polymer (POP) nanosonosensitizer (H-Pys-HA@M/R), which combine SDT, "on-demand" chemotherapy, and immunotherapy. Taking the unique advantages of POPs with designable structures and high specific surface area, this H-Pys-HA@M/R nanosonosensitizer can achieve tumor target accumulation, GSH-triggered drug release, and low-frequency ultrasound-activating ROS generation with encouraging results. Furthermore, this multifunctional nanosonosensitizer can effectively evoke immunogenic cell death (ICD) response through the combination of SDT and chemotherapy for both primary and distal tumor growth suppression. Meanwhile, H-Pys-HA@M/R exhibits favorable biodegradation and biosafety. Therefore, this study provides a new strategy for reasonably designing and constructing POP-related sonosensitizers combining SDT/chemotherapy/immunotherapy triple treatment modalities to eradicate malignant tumors.

Nitrogen-Rich Porous Organic Polymers with Supported Ag Nanoparticles for Efficient CO2 Conversion

As CO₂ emissions increase and the global climate deteriorates, converting CO₂ into valuable chemicals has become a topic of wide concern. The development of multifunctional catalysts for efficient CO₂ conversion remains a major challenge. Herein, two porous organic polymers (NPOPs) functionalized with covalent triazine and triazole N-heterocycles are synthesized through the copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The NPOPs have an abundant microporous content and high specific surface area, which confer them excellent CO₂ affinities with a CO₂ adsorption capacity of 84.0 mg g^-1 and 63.7 mg g^-1, respectively, at 273 K and 0.1 MPa. After wet impregnation and in situ reductions, Ag nanoparticles were supported in the NPOPs to obtain Ag@NPOPs with high dispersion and small particle size. The Ag@NPOPs were applied to high-value conversion reactions of CO₂ with propargylic amines and terminal alkynes under mild reaction conditions. The carboxylative cyclization transformation of propargylic amine into 2-oxazolidinone and the carboxylation transformation of terminal alkynes into phenylpropiolic acid had the highest TOF values of 1125.1 and 90.9 h^-1, respectively. The Ag@NPOP-1 was recycled and used five times without any significant decrease in catalytic activity, showing excellent catalytic stability and durability.

Synthesis of Electron-Rich Porous Organic Polymers via Schiff-Base Chemistry for Efficient Iodine Capture

As one of the main nuclear wastes generated in the process of nuclear fission, radioactive iodine has attracted worldwide attention due to its harm to public safety and environmental pollution. Therefore, it is of crucial importance to develop materials that can rapidly and efficiently capture radioactive iodine. Herein, we report the construction of three electron-rich porous organic polymers (POPs), denoted as POP-E, POP-T and POP-P via Schiff base polycondensations reactions between Td-symmetric adamantane knot and four-branched “linkage” molecules. We demonstrated that all the three POPs showed high iodine adsorption capability, among which the adsorption capacity of POP-T for iodine vapor reached up to 3.94 g·g⁻¹ and the removal rate of iodine in n-hexane solution was up to 99%. The efficient iodine capture mechanism of the POP-T was investigated through systematic comparison of Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) before and after iodine adsorption. The unique π-π conjugated system between imine bonds linked aromatic rings with iodine result in charge-transfer complexes, which explains the exceptional iodine capture capacity. Additionally, the introduction of heteroatoms into the framework would also enhance the iodine adsorption capability of POPs. Good retention behavior and recycling capacity were also observed for the POPs.

Porous Polymers as Universal Reversal Agents for Heparin Anticoagulants through an Inclusion-Sequestration Mechanism

Heparins are widely used anticoagulants for surgical procedures and extracorporeal therapies. However, all of them have bleeding risks. Protamine sulfate, the only clinically approved antidote for unfractionated heparin (UFH), has adverse effects. Moreover, protamine can only partially neutralize low-molecular-weight heparins (LMWHs) and is not effective for fondaparinux. Here, an inclusion-sequestration strategy for efficient neutralization of heparin anticoagulants by cationic porous supramolecular organic frameworks (SOFs) and porous organic polymers (POPs) is reported. Isothermal titration calorimetric and fluorescence experiments show strong binding affinities of these porous polymers toward heparins, whereas dynamic light scattering and zeta potential analysis confirm that the heparin sequences are adsorbed into the interior of the porous hosts. Activated partial thromboplastin time, anti-FXa, and thromboelastography assays indicate that their neutralization efficacies are higher than or as high as that of protamine for UFH and generally superior to protamine for LMWHs and fondaparinux, which is further confirmed by tail-transection model in mice and ex vivo aPTT or anti-FXa analysis in rats. Acute toxicity evaluations reveal that one of the SOFs displays outstanding biocompatibility. This work suggests that porous polymers can supply safe and rapid reversal of clinically used heparins, as protamine surrogates, providing an improved approach for their neutralization.

Pyrene-based sulfonated organic porous materials for rapid adsorption of cationic dyes in water

Porous organic polymers (POP) have gained attention because of their high specific surface area, porosity and their simplicity in synthesis, but for the most part, they are hydrophobic because of their organic backbone, making it difficult to expand their applications. Here, we have obtained poly(pyrene) porous organic polymers (PyPOP) through the polymerization of pyrene monomers catalysed by aluminium trichloride, which is a simple and inexpensive synthesis method. The sulfonated poly(pyrene) porous organic polymers (PyPOP-SO₃H) obtained showed rapid adsorption of cationic dyes, especially malachite green (MG adsorption 1607 mg/g) and methylene blue (MB adsorption 1220 mg/g) in pH = 7 aqueous solution, room temperature. The results show that the Freundlich model is more in line with the adsorption process than the Langmuir model, whether for methylene blue or malachite green. In addition, the PSO kinetic model fits better than PFO kinetic model, whether it is for the adsorption of methylene blue or malachite green. The excellent adsorption performance of PyPOP-SO3H for cationic dyes may be due to the introduction of sulfonic acid groups, which not only increases the specific surface area but also allows better dispersion in water, increasing contact points and adsorption efficiency. This research expands the scope of exploration and application of POP.

Highly Efficient and Selective Gold Recovery Based on Hypercross-Linking and Polyamine-Functionalized Porous Organic Polymers

With the continuous increase of electronic products, there is an urgent need to effectively recover gold from e-waste and other secondary resources other than the original mine. Here, hypercross-linking and polyamine-functionalized porous organic polymers (Pc-POSS-POP) were designed and facially synthesized based on multiple azo-coupling polymerizations between 2,9,16,23-tetraaminophthalocyanine (H₂Pc(NH₂)₄) and octa(aminophenyl)-t8-silsesquioxane (OAPS) for the first time. The reaction requires no metal as a catalyst, thereby benefiting the purification of the product and the industrial scalability. Pc-POSS-POPs possess a hypercross-linking structure, highly conjugated frameworks, nitrogen-rich active sites, and extensively visible and near-infrared light absorption, which was utilized as an absorbent to retrieve Au (III). The results demonstrated that Pc-POSS-POPs have a high adsorption capacity (862.07 mg g^-1) and a rapid adsorption rate toward gold recycling. The maximum adsorption capacity could reach up to 1026.87 mg g^-1 as in the case of light irradiation. Due to the strong N coordination sites and the electronic interaction between the -NH₄⁺ groups of Pc-POSS-POPs and AuCl₄^-, Pc-POSS-POPs also exhibited excellent selectivity toward gold over several coordinated metals [Cr (VI), Co (II), Cd (II), Ni (II), and Hg (II)]. These properties together with the good regenerative ability and superior recyclability demonstrated that Pc-POSS-POPs possess promising potential as hypercross-linking polymers for capturing and recycling of Au (III).

Macrocycle-Based Porous Organic Polymers for Separation, Sensing, and Catalysis

With the rapid development of materials science, porous organic polymers (POPs) have received remarkable attentions because of their unique properties such as the exceptionally high surface area and flexible molecular design. The ability to incorporate specific functions in a precise manner makes POPs promising platforms for a myriad of applications in molecular adsorption, separation, and catalysis. Therefore, many different types of POPs have been rationally designed and synthesized to expand the scope of advanced materials, endowing them with distinct structures and properties. Recently, supramolecular macrocycles with excellent host-guest complexation abilities are emerging as powerful crosslinkers for developing novel POPs with hierarchical structures and improved performance, which can be well-organized at different spatial scales. Macrocycle-based POPs could have unusual porous, adsorptive, and optical properties when compared to their nonmacrocycle-incorporated counterparts. This cooperation provides valuable insights for the molecular-level understanding of skeletal complexity and diversity. Here, the research advances of macrocycle-based POPs are aptly summarized by showing their syntheses, properties, and applications in terms of separation, sensing, and catalysis. Finally, the current challenging issues in this exciting research field are delineated and a comprehensive outlook is offered for their future directions.

Pillar[5]arene-Integrated Three-Dimensional Framework Polymers for Macrocycle-Induced Size-Selective Catalysis

Size-selective catalysis is of key importance in the conversion of crude oil or biomass. Here, we fabricate three pillar[5]arene-integrated porous organic polymers with three-dimensional (3D) network structures using 3D cross-linkers. The resulting polymers possess a high surface-to-mass ratio and exhibit exceptional size-selective catalysis in Knoevenagel condensation reactions. In addition, a mechanistic study indicates that the size-selective catalysis is due to the host-guest interaction between pillar[5]arene and substrates. This study suggests that macrocycle-containing polymers could be a promising candidate for size-selective catalysis.

Porous Organic Polymers Derived from Ferrocene and Tetrahedral Silicon-Centered Monomers for Carbon Dioxide Sorption

Herein, we present two novel ferrocene-containing porous organic polymers, FPOP-1 and FPOP-2, by the Heck reactions of 1,1′-divinylferrocene with two tetrahedral silicon-centered units, i.e., tetrakis(4-bromophenyl)silane and tetrakis(4′-bromo-[1,1′-biphenyl]-4-yl)silane. The resulting materials possess high thermal stability and moderate porosity with the Brunauer–Emmer–Teller (BET) surface areas of 499 m² g⁻¹ (FPOP-1) and 354 m² g⁻¹ (FPOP-2) and total pore volumes of 0.43 cm³ g⁻¹ (FPOP-1) and 0.49 cm³ g⁻¹ (FPOP-2). The porosity is comparable to previously reported ferrocene-containing porous polymers. These materials possess comparable CO₂ capacities of 1.16 mmol g⁻¹ (5.10 wt%) at 273 K and 1.0 bar, and 0.54 mmol g⁻¹ (2.38 wt%) at 298 K and 1.0 bar (FPOP-1). The found capacities are comparable to, or higher than many porous polymers having similar or higher surface areas. They have high isosteric heats of up to 32.9 kJ mol⁻¹, proving that the affinity between the polymer network and CO₂ is high, which can be explained by the presence of ferrocene units in the porous networks. These results indicate that these materials can be promisingly utilized as candidates for the storage or capture of CO₂. More ferrocene-containing porous polymers can be designed and synthesized by combining ferrocene units with various aromatic monomers under this strategy and their applications could be explored.

Designing Phenyl Porous Organic Polymers with High-Efficiency Tetracycline Adsorption Capacity and Wide pH Adaptability

Adsorption is an effective method to remove tetracycline (TC) from water, and developing efficient and environment-friendly adsorbents is an interesting topic. Herein, a series of novel phenyl porous organic polymers (P-POPs), synthesized by one-pot polymerization of different ratios of biphenyl and triphenylbenzene under AlCl₃ catalysis in CH₂Cl₂, was studied as a highly efficient adsorbent to removal of TC in water. Notably, the obtained POPs possessed abundant phenyl-containing functional groups, large specific surface area (1098 m²/g) with abundant microporous structure, high pore volume (0.579 cm³/g), favoring the removal of TC molecules. The maximum adsorption capacity (fitted by the Sips model) could achieve 581 mg/g, and the adsorption equilibrium is completed quickly within 1 h while obtaining excellent removal efficiency (98%). The TC adsorption process obeyed pseudo-second-order kinetics and fitted the Sips adsorption model well. Moreover, the adsorption of POPs to TC exhibited a wide range of pH (2–10) adaptability and outstanding reusability, which could be reused at least 5 times without significant changes in structure and efficiency. These results lay a theoretical foundation for the application of porous organic polymer adsorbents in antibiotic wastewater treatment.

Microporous Carbon and Carbon/Metal Composite Materials Derived from Bio-Benzoxazine-Linked Precursor for CO2 Capture and Energy Storage Applications

There is currently a pursuit of synthetic approaches for designing porous carbon materials with selective CO₂ capture and/or excellent energy storage performance that significantly impacts the environment and the sustainable development of circular economy. In this study we prepared a new bio-based benzoxazine (AP-BZ) in high yield through Mannich condensation of apigenin, a naturally occurring phenol, with 4-bromoaniline and paraformaldehyde. We then prepared a PA-BZ porous organic polymer (POP) through Sonogashira coupling of AP-BZ with 1,3,6,8-tetraethynylpyrene (P-T) in the presence of Pd(PPh₃)₄. In situ Fourier transform infrared spectroscopy and differential scanning calorimetry revealed details of the thermal polymerization of the oxazine rings in the AP-BZ monomer and in the PA-BZ POP. Next, we prepared a microporous carbon/metal composite (PCMC) in three steps: Sonogashira coupling of AP-BZ with P-T in the presence of a zeolitic imidazolate framework (ZIF-67) as a directing hard template, affording a PA-BZ POP/ZIF-67 composite; etching in acetic acid; and pyrolysis of the resulting PA-BZ POP/metal composite at 500 °C. Powder X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller (BET) measurements revealed the properties of the as-prepared PCMC. The PCMC material exhibited outstanding thermal stability (T_d10 = 660 °C and char yield = 75 wt%), a high BET surface area (1110 m² g^–1), high CO₂ adsorption (5.40 mmol g^–1 at 273 K), excellent capacitance (735 F g^–1), and a capacitance retention of up to 95% after 2000 galvanostatic charge–discharge (GCD) cycles; these characteristics were excellent when compared with those of the corresponding microporous carbon (MPC) prepared through pyrolysis of the PA-BZ POP precursors with a ZIF-67 template at 500 °C.

Encapsulation of Metal Clusters within Porous Organic Materials: From Synthesis to Catalysis Applications

Metal clusters (MCs) with dimensions between a single metal atom and nanoparticles of >2 nm usually possess distinct geometric and electronic structures, their outstanding performance in catalysis applications have underpinned a broad research interest. However, smaller-sized MCs are easily deactivated by migration coalescence during the catalysis process because of their high surface energy. Therefore, the search of an appropriate stabilizer for MCs is urgently demanded. In recent years, porous organic polymers (POPs) and organic molecular cages (OMCs), as emerging functional materials, have attracted significant attention. Benefiting from the spatial confinement, encapsulating MCs into these porous organic materials is a promising approach to guarantee the uniform size distribution and stability. In this review, we aim to provide a comprehensive summary of the recent progress in the synthetic strategies and catalysis applications of the encapsulated MCs, and seek to uncover promising ideas that can stimulate future developments at both the fundamental and applied levels.

Pyrene-Based Fluorescent Porous Organic Polymers for Recognition and Detection of Pesticides

Eating vegetables with pesticide residues over a long period of time causes serious adverse effects on the human body, such as acute poisoning, chronic poisoning, and endocrine system interference. To achieve the goal of a healthy society, it is an urgent issue to find a simple and effective method to detect organic pesticides. In this work, two fluorescent porous organic polymers, LNU-45 and LNU-47 (abbreviation for Liaoning University), were prepared using π-conjugated dibromopyrene monomer and boronic acid compounds as building units through a Suzuki coupling reaction. Due to the large π-electron delocalization effect, the resulting polymers revealed enhanced fluorescence performance. Significantly, in sharp contrast with the planar π-conjugated polymer framework (LNU-47), the distorted conjugated structure (LNU-45) shows a higher specific surface area and provides a broad interface for analyte interaction, which is helpful to achieve rapid response and detection sensitivity. LNU-45 exhibits strong fluorescence emission at 469 nm after excitation at 365 nm in THF solution, providing strong evidence for its suitability as a luminescent chemosensor for organic pesticides. The fluorescence quenching coefficients of LNU-45 for trifluralin and dicloran were 5710 and 12,000 (LNU-47 sample by ca. 1.98 and 3.38 times), respectively. Therefore, LNU-45 serves as an effective "real-time" sensor for the detection of trifluralin and dicloran with high sensitivity and selectivity.

Calix[4]pyrrole-based Crosslinked Polymer Networks for Highly Effective Iodine Adsorption from Water

A series of calix[4]pyrrole-based crosslinked polymer networks designed for iodine capture is reported. These materials were prepared by Sonogashira coupling of α,α,α,α-tetra(4-alkynylphenyl)calix[4]pyrrole with bishalide building blocks with different electronic properties and molecular sizes. Despite their low Brunauer-Emmett-Teller surface areas, iodine vapor adsorption capacities of up to 3.38 g g^-1 were seen, a finding ascribed to the presence of a large number of effective sorption sites including macrocyclic π-rich cavities, aryl units, and alkyne groups within the material. One particular system, C[4]P-BTP, was found to be highly effective at iodine capture from water (uptake capacity of 3.24 g g^-1 from a concentrated aqueous KI/I₂ solution at ambient temperature). Fast capture kinetics (k_obs =7.814 g g^-1  min^-1 ) were seen. Flow-through adsorption experiments revealed that C[4]P-BTP is able to remove 93.2 % of iodine from an aqueous source phase at a flow rate of 1 mL min^-1 .

Design of Persistent and Stable Porous Radical Polymers by Electronic Isolation Strategy

Conjugated organic radical polymers with stable radical features are difficult to design because the π conjugation in the polymer backbones makes the radicals readily delocalize and tend to undergo covalent bonding processes. In this work, we report an electronic isolation strategy to design stable porous radical polymers by homocoupling reaction from a meta-position active monomer. The meta linkage ensures less conjugation in the polymer skeletons, localizes the resonant radicals, and prevents them from recombination. The resulting porous radical polymer exhibits exceptional radical characters with ultralow band gap of 0.68 eV, strong yet extended UV/Vis-NIR absorption up to 1800 nm, and high spin density. The above features make the polymer very promising in the photothermal conversion with record-high photothermal temperature increment of ≈∼240 °C and striking solar-driven water evaporation efficiency of 96.8 %. Our results demonstrate the feasibility of electronic isolation of radicals for producing outstanding photothermal materials.

Metal-Free Heptazine-Based Porous Polymeric Network as Highly Efficient Catalyst for CO2 Capture and Conversion

The capture and catalytic conversion of CO₂ into value-added chemicals is a promising and sustainable approach to tackle the global warming and energy crisis. The nitrogen-rich porous organic polymers are excellent materials for CO₂ capture and separation. Herein, we present a nitrogen-rich heptazine-based microporous polymer for the cycloaddition reaction of CO₂ with epoxides in the absence of metals and solvents. HMP-TAPA, being rich in the nitrogen site, showed a high CO₂ uptake of 106.7 mg/g with an IAST selectivity of 30.79 toward CO₂ over N₂. Furthermore, HMP-TAPA showed high chemical and water stability without loss of any structural integrity. Besides CO₂ sorption, the catalytic activity of HMP-TAPA was checked for the cycloaddition of CO₂ and terminal epoxides, resulting in cyclic carbonate with high conversion (98%). They showed remarkable recyclability up to 5 cycles without loss of activity. Overall, this study represents a rare demonstration of the rational design of POPs (HMP-TAPA) for multiple applications.

Porous Organic Polymers for Catalytic Conversion of Carbon Dioxide

To overcome the challenges of global warming and environmental pollution, it is necessary to reduce the concentration of carbon dioxide (CO₂ ) in the atmosphere, which is mainly accumulated in the air through the burning of fossil fuels. Therefore, the development of environmentally friendly strategies to capture carbon dioxide and convert it into value-added products offers a promising way forward for reducing carbon dioxide concentration in the atmosphere. In this context, POPs (porous organic polymers) have shown great potential as CO₂ selective adsorbents due to their high specific surface area, chemical stability, nanoscale porosity and structural diversity, as well as POPs based heterogeneous catalysts for CO₂ conversion. This review provides a concise account of preparation methods of various POPs, challenges and current development trends of POPs in photocatalytic CO₂ reduction, electrocatalytic CO₂ reduction and chemical CO₂ conversion.

De Novo Fabrication of Large-Area and Self-Standing Covalent Organic Framework Films for Efficient Separation

Covalent organic frameworks (COFs) have aroused extensive attention from various fields owing to their numerous advantages, including permanent porosity, high crystallinity, strong robustness, and well-ordered channels. However, the poor processability of the crystallite powder has greatly impeded their further utilization in many advanced devices and frontier areas. In this work, we fabricate a series of COF films using an interfacial polymerization strategy at a liquid-liquid interface under ambient conditions. The as-synthesized freestanding films are continuous, flexible, and defect-free and have large areas of up to 4 × 6 cm². In addition, the pore sizes of these COF films can be well controlled based on the principle of reticular chemistry. These films exhibit high chemical stability even in acidic and basic aqueous solutions. More significantly, the highly robust COF films can serve as a nanofiltration membrane for efficient separation of pollutant molecules with different dimensions. These films show high selectivity for the separation of mixed molecule feed and excellent recyclability without a significant loss in the rejection rate.

[Preparation of melamine-functionalized porous organic polymer and its adsorption properties for methyl orange]

In this work, a polymer precursor was first synthesized using p-terphenyl (TP) and terephthaloyl chloride (TC) as monomers. Then, cross-linking was realized by means of a Schiff base reaction with melamine (MA) as a modifier to obtain an amine-functionalized porous organic polymer TP-TC-MA. The synthesized polymers were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and point of zero charge (pH_pzc) measurements, as well as on the basis of nitrogen adsorption-desorption isotherms. Adsorption experiments were carried out to evaluate the adsorption properties of TP-TC-MA for methyl orange (MO), a typical anionic azo dye that has widespread industrial application. The amount of MO adsorbed on TP-TC-MA was evaluated by ultraviolet-visible (UV-Vis) spectroscopy at a wavelength of 463 nm. Microscopic analysis revealed that the as-synthesized polymer had an aggregated particle-shaped structure. XRD spectra confirmed that TP-TC-MA was an amorphous polymer, consistent with the results of high-resolution TEM experiments. The Brunauer-Emmett-Teller (BET) specific surface area and total pore volume of TP-TC-MA were determined as 708.5 m ²/g and 0.556 cm³/g, respectively. The measured pH_pzc of TP-TC-MA was 4.0, probably because of the abundant nitrogen-containing groups provided by MA. The factors affecting adsorption, such as pH, adsorbent dosage, contact time, initial pollutant concentration, and ionic strength, were investigated. Because of the protonation of the N-atom in TP-TC-MA, the pH had a strong impact on the adsorption of MO. The removal efficiency could be maximized at the optimized pH of 3.0. The adsorption equilibrium isotherm, measured at 25 ℃ and a concentration of 50-500 mg/L, showed that the MO adsorption over TP-TC-MA followed the Langmuir isotherm, with a maximum adsorption capacity of 156.3 mg/g. The modeling of the experimental adsorption data was consistent with the pseudo-second-order kinetic model, which indicated fast adsorption and chemisorption as the dominant mechanism. With increasing ionic strength, the adsorption of MO slightly decreased, suggesting a partial antagonistic ion effect. Results of the selectivity study revealed that TP-TC-MA was more selective toward MO than methylene blue (MB), which indicated that electrostatic interactions played a significant role during the adsorption progress. Five adsorption-desorption cycles showed that TP-TC-MA could be regenerated without significant deterioration of its adsorption efficiency, indicating that it has good stability and reusability. The observed adsorption performance indicated that this MA-modified porous organic polymer offers prospects for further research and application in the treatment of dye-containing wastewaters.

Integrating Single Atoms with Different Microenvironments into One Porous Organic Polymer for Efficient Photocatalytic CO2 Reduction

The precise identification of single-atom catalysts (SACs) activity and boosting their efficiency toward CO₂ conversion is imperative yet quite challenging. Herein, for the first time a series of porous organic polymers is designed and prepared simultaneously, containing well-defined M-N₄ and M-N₂ O₂ single-atom sites. Such a strategy not only offers multiactive sites to promote the catalytic efficiency but also provides a more direct chance to identify the metal center activity. The CO₂ photoreduction results indicate that the introduction of salphen unit with Ni-N₂ O₂ catalytic centers into pristine phthalocyanine-based Ni-N₄ framework achieves remarkable CO generation ability (7.77 mmol g^-1 ) with a high selectivity of 96% over H₂ . In combination with control experiments, as well as theoretical studies, the Ni-N₂ O₂ moiety is evidenced as a more active site for CO₂ RR compared with the traditional Ni-N₄ moiety, which can be ascribed to the M-N₂ O₂ active sites effectively reducing the energy barrier, facilitating the adsorption of reaction radicals *COOH, and improving the charge transportation. This work might shed some light on designing more efficient SACs toward CO₂ reduction through modification of their coordination environments.

Imidazolium-Functionalized Chemically Robust Ionic Porous Organic Polymers (iPOPs) toward Toxic Oxo-Pollutants Capture from Water

Fabricating new and efficient materials aimed at containment of water contamination, in particular removing toxic heavy metal based oxo-anions (e. g. CrO₄ ^2- , TcO₄ ^- ) holds paramount importance. In this work, we report two new highly stable imidazolium based ionic porous organic polymers (iPOPs) decorated with multiple interaction sites along with electrostatics driven adsorptive removal of such oxo-anions from water. Both the iPOPs (namely, iPOP-3 and iPOP-4) exhibited rapid sieving kinetics and very high saturation uptake capacity for CrO₄ ^2- anions (170 and 141 mg g^-1 for iPOP-3 and iPOP-4 respectively) and ReO₄ ^- (515.5 and 350.3 mg g^-1 for iPOP-3 and iPOP-4 respectively), where ReO₄ ^- anions being the non-radioactive surrogative counterpart of radioactive TcO₄ ^- ions. Noticeably, both iPOPs showed exceptional selectivity towards CrO₄ ^2- and ReO₄ ^- even in presence of several other concurrent anions such as Br^- , Cl^- , SO₄ ^2- , NO₃ ^- etc. The theoretical binding energy calculations via DFT method further confirmed the preferential interaction sites as well as binding energies of both iPOPs towards CrO₄ ^2- and ReO₄ ^- over all other competing anions which corroborates with the experimental high capacity and selectivity of iPOPs toward such oxo-anions.

Hypercrosslinked Polymers as a Photocatalytic Platform for Visible-Light-Driven CO2 Photoreduction Using H2 O

The design of robust, high-performance photocatalysts is key for the success of solar fuel production by CO2 conversion. In this study, hypercrosslinked polymer (HCP) photocatalysts have been developed for the selective reduction of CO2 to CO, combining excellent CO2 sorption capacities, good general stabilities, and low production costs. HCPs are active photocatalysts in the visible light range, significantly outperforming the benchmark material, TiO2 P25, using only sacrificial H2 O. It is hypothesized that superior H2 O adsorption capacities facilitate access to photoactive sites, improving photocatalytic conversion rates when compared to sacrificial H2 . These polymers are an intriguing set of organic photocatalysts, displaying no long-range order or extended π-conjugation. The as-synthesized networks are the sole photocatalytic component, requiring no added cocatalyst doping or photosensitizer, representing a highly versatile and exciting platform for solar-energy conversion.

Molecular-Rotor-Driven Advanced Porous Materials

Advanced porous materials (APMs)-such as metal-organic frameworks (MOFs) and porous organic polymers (POPs)-have emerged as an exciting research frontier of chemistry and materials science. Given their tunable pore size and extensive diversity, APMs have found widespread applications. In addition, adding dynamic functional groups to porous solids furthers the development of stimuli-responsive materials. By incorporating moving elements-molecular rotors-into the porous frameworks, molecular-rotor-driven advanced porous materials (MR-APMs) can respond reversibly to chemical and physical stimuli, thus imparting dynamic functionalities that have not been found in conventional porous materials. This Minireview discusses exemplary MR-APMs in terms of their design, synthesis, rotor dynamics, and potential applications.

The Prospect of Dimensionality in Porous Semiconductors

With the advent of silicon-based semiconductors, a plethora of previously unknown technologies became possible. The development of lightweight low-dimensional organic semiconductors followed soon after. However, the efficient charge/electron transfers enabled by the non-porous 3D structure of silicon is rather challenging to be realized by their (metal-)organic counterparts. Nevertheless, the demand for lighter, more efficient semiconductors is steadily increasing resulting in a growing interest in (metal-)organic semiconductors. These novel materials are faced with a variety of challenges originating from their chemical design, their packing and crystallinity. Although the effect of molecular design is quite well understood, the influence of dimensionality and the associated change in properties (porosity, packing, conjugation) is still an uncharted area in (metal-)organic semiconductors, yet highly important for their practical utilization. In this Minireview, an overview on the design and synthesis of porous semiconductors, with a particular emphasis on organic semiconductors, is presented and the influence of dimensionality is discussed.