Multifunctional Bacterial Cellulose/Covalent Organic Framework Composite Membranes with Antifouling and Antibacterial Properties for Dye Separation

Covalent organic frameworks (COFs) have a wide application prospect in wastewater treatment because of their unique structure and properties; however, the preparation of pure COF membranes remains a great challenge by reason of the insolubility and unprocessability of COF powders formed at high temperature and high pressure. In this study, a continuous and defect-free bacterial cellulose/covalent organic framework composite membrane was prepared by using bacterial cellulose (BC) and a porphyrin-based COF with their unique structures and hydrogen bonding forces. The dye rejection rate of this composite membrane toward methyl green and congo red was up to 99%, and the permeance was about 195 L m^-2 h^-1 bar^-1. It showed excellent stability under different pH conditions, long-time filtration, and cyclic experimental conditions. In addition, the hydrophilicity and surface negativity of the BC/COF composite membrane made it have certain antifouling performance, and the flux recovery rate can reach 93.72%. More importantly, the composite membrane exhibited excellent antibacterial properties due to the doping of the porphyrin-based COF, and the survival rates of both Escherichia coli and Staphylococcus aureus were less than 1% after exposure to visible light. The self-supporting BC/COF composite membrane synthesized by this strategy also has outstanding antifouling and antibacterial properties, in addition to excellent dye separation effects, which greatly broaden the application of COF materials in water treatment.

Interfacial Polymerization on Polyethersulfone Ultrafiltration Membrane to Prepare Nanofiltration Layers for Dye Separation

Nanofiltration membranes are of great significance to the treatment of dye wastewater. Interfacial polymerization is a widely used method to fabricate nanofiltration membranes. In this study, the interaction of tannic acid-assisted polyethylene polyamine (PEPA) with terephthalaldehyde (TPAL) was performed on PES ultrafiltration membranes using novel nitrogen-rich amine monomers and relatively less reactive aldehyde-based monomers. A new nanofiltration membrane ((T-P-T)/PES) was prepared by interfacial polymerization. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy were used to analyze the elemental composition, bonding state, and surface morphology of the membrane surface. The effects of the PEPA deposition time, TPAL concentration, interfacial reaction time, and curing time on the nanofiltration layer were investigated. The modified membrane, prepared under optimal conditions, showed strong dye separation ability. The permeation of the modified membrane could reach 68.68 L·m^-2·h^-1·bar^-1, and the rejection of various dyes was above 99%. In addition, the (T-P-T)/PES membrane showed good stability during long-term dye separation.

A brick-wall topological 2D covalent organic framework constructed from an H-shaped "two-in-one" monomer

As an emerging porous crystalline material, covalent organic frameworks (COFs) have received considerable research interests in terms of exploring new architectures and functions. Herein, we developed an unprecedented "H-shaped" monomer, upon self-polycondensation, which facilely produced a benzoimidazole-based COF (H-BIm-COF) with a rarely reported "brick-wall" topology. H-BIm-COF displayed high crystallinity, nano-sized porosity, large BET surface area of 507 m2 g-1, and high thermal and chemical stabilities. Interestingly, H-BIm-COF based membranes showed selective permeability towards different solvents related to the size and polarity of the guest molecule. Additionally, initial study suggested the COF displayed excellent rejection efficiency towards ionic dyes, e.g. chromium black T (99.7%) and rhodamine B (97.3%). This work provides insights into developing new topological COFs by designing monomers with new configuration.

High-Performance and Stable Two-Dimensional MXene-Polyethyleneimine Composite Lamellar Membranes for Molecular Separation

Two-dimensional (2D) materials are candidates for use in advanced molecular separation and water treatment. Among them, MXenes are cutting-edge two-dimensional (2D) materials with favorable properties such as high hydrophilicity, adjustable interlayer spacing, high mechanical strength, and structural stability. Therefore, they can be used to construct advanced lamellar membranes to ensure enhanced separation performance of modified membranes. Here, we prepared novel stable lamellar membranes through electrostatic attraction between polycation polyethyleneimine (PEI) and a negatively charged MXene, with hydrogen bond formation between their functional groups. By changing the pH of the suspension, the interlayer d-spacing of the prepared membrane could be altered to achieve precise molecular separation and ultrahigh organic solvent penetration. Furthermore, inserting PEI into the interlayer d-spacing of the membrane did not hinder the passage of water molecules. The prepared pH = 2-MXene-PEI membrane for dyes larger than 1.5 nm exhibited a rejection rate of greater than 96%, and the pH = 10-MXene-PEI membrane had a rejection rate of greater than 96% for dyes larger than 1.6 nm. In addition, the optimized MXene-PEI membranes showed channel stability. In this work, high-performance, stable, 2D MXene-PEI membranes with tunable nanochannels were developed. These membranes have great potential for use in precise molecular separation applications.

Tunable Graphene Oxide Nanofiltration Membrane for Effective Dye/Salt Separation and Desalination

Effective dye separation and desalination are critical for the treatment of highly saline textile wastewater with dye mixtures. In this study, a graphene oxide (GO) membrane with a tunable interlayer distance (d) was fabricated to generate clean water via two-stage filtration, namely, the dye/salt separation and desalination stages. In the first stage, under low pressure (e.g., 0.3 MPa), the membrane with a d value of ca. 7.60 Å was suitable for removing the dye from the saline wastewater. The dye and salt (i.e., Na₂SO₄) rejection rates of >99% and <6.5% were achieved, respectively, indicating the significant potential to recycle the dyes from the highly saline dye wastewater. In the second stage, under a higher pressure (e.g., 0.8 MPa), the d value was reduced to ca. 7.15 Å, bestowing the membrane with a desalination function. The desalination rate of a single filtration process could reach up to 51.8% from 1.0 g/L saline (i.e., Na₂SO₄) water. The as-prepared membrane also exhibited excellent practical advantages, including ultrahigh permeability, significant antifouling (against dye) performance, and excellent stability. Furthermore, with the stacking of multistage filtration systems, the proposed membrane technology will be capable of regenerating dye and producing clean water.

De Novo Fabrication of Large-Area and Self-Standing Covalent Organic Framework Films for Efficient Separation

Covalent organic frameworks (COFs) have aroused extensive attention from various fields owing to their numerous advantages, including permanent porosity, high crystallinity, strong robustness, and well-ordered channels. However, the poor processability of the crystallite powder has greatly impeded their further utilization in many advanced devices and frontier areas. In this work, we fabricate a series of COF films using an interfacial polymerization strategy at a liquid-liquid interface under ambient conditions. The as-synthesized freestanding films are continuous, flexible, and defect-free and have large areas of up to 4 × 6 cm². In addition, the pore sizes of these COF films can be well controlled based on the principle of reticular chemistry. These films exhibit high chemical stability even in acidic and basic aqueous solutions. More significantly, the highly robust COF films can serve as a nanofiltration membrane for efficient separation of pollutant molecules with different dimensions. These films show high selectivity for the separation of mixed molecule feed and excellent recyclability without a significant loss in the rejection rate.

Ordered Mesoporous Alumina with Tunable Morphologies and Pore Sizes for CO2 Capture and Dye Separation

We describe a versatile and scalable strategy toward long-range and periodically ordered mesoporous alumina (Al₂O₃) structures by evaporation-induced self-assembly of a structure-directing ABA triblock copolymer (F127) mixed with aluminum tri-sec-butoxide-derived sol additive. We found that the separate preparation of the alkoxide sol-gel reaction before mixing with the block copolymer enabled access to a relatively unexplored parameter space of copolymer-to-additive composition, acid-to-metal molar ratio, and solvent, yielding ordered mesophases of two-dimensional (2D) lamellar, hexagonal cylinder, and 3D cage-like cubic lattices, as well as multiscale hierarchical ordered structures from spinodal decomposition-induced macro- and mesophase separation. Thermal annealing in air at 900 °C yielded well-ordered mesoporous crystalline γ-Al₂O₃ structures and hierarchically porous γ-Al₂O₃ with 3D interconnected macroscale and ordered mesoscale pore networks. The ordered Al₂O₃ structures exhibited tunable pore sizes in three different length scales, <2 nm (micropore), 2-11 nm (mesopore), and 1-5 μm (macropore), as well as high surface areas and pore volumes of up to 305 m²/g and 0.33 cm³/g, respectively. Moreover, the resultant mesoporous Al₂O₃ demonstrated enhanced adsorption capacities of carbon dioxide and Congo red dye. Such hierarchically ordered mesoporous Al₂O₃ are well-suited for green environmental solutions and urban sustainability applications, for example, high-temperature solid adsorbents and catalyst supports for carbon dioxide sequestration, fuel cells, and wastewater separation treatments.

Self-Organized Implanting of Micro/Nanofiltration Membranes in Advanced Flow μ-Reactors

A low-cost, simple, and one-step synthesis of cellulose acetate nanoparticles (CANPs) has been invented using a continuous-flow advanced microfluidic reactor. For this purpose, the CANPs are self-organized inside a cross-junction microchannel by flowing cellulose acetate (CA) dissolved in N,N-dimethylformamide (DMF) through the axial inlet and the antisolvent water through the pair of side inlets. The preferential solubility (insolubility) of DMF (CA) to antisolvent water stimulates the in situ synthesis of CANPs at the DMF/water miscible interface following a phase-inversion process. Subsequently, nanofiltration, ultrafiltration, and microfiltration membranes of different porosities and permeabilities have been prepared from freshly synthesized CANPs. The porosity, thickness, transparency, and wettability of the membranes are tuned by varying the thickness of the membranes, size of the nanoparticles, and the porosity of the membranes. The as-synthesized CANPs show enhanced bactericidal properties with and without loading an external drug, curcumin, which has been validated against the Gram-negative Pseudomonas aeruginosa species. Importantly, enabling a pulsatile flow during the synthesis, the CANPs are embedded as nanofiltration membranes inside the microfluidic channel. Such microfluidic devices have been used to separate a corrosive dye from water. Concisely, the proposed in situ synthesis of CANPs in the continuous-flow microfluidic reactors, their usage for fabricating membranes with tunable wettability and transparency, and their subsequent integration into the microfluidic channel show the potential of the invention for a host of applications related to health care and environmental remediation.

Mixed Nanosheet Membranes Assembled from Chemically Grafted Graphene Oxide and Covalent Organic Frameworks for Ultra-high Water Flux

2D graphene oxide (GO) membranes attract great attention because of their ultrathin thickness and superior molecular sieving ability, but their low flux and instability in aqueous environments are still the major challenges for practical applications. In this study, we designed hybrid nanosheets from chemically grafted GO and covalent organic frameworks (COFs) as building blocks to fabricate mixed nanosheet membranes. The covalent triazine framework (CTF), a triazine-based COF, is exfoliated into nanosheets and then reacted with GO to form the GO-CTF hybrid nanosheets, which are then assembled into GO-CTF mixed nanosheet membranes. The GO-CTF membranes show a layered configuration of ca. 32 nm thickness. The incorporation of CTF nanosheets inappreciably changes the interlayer distance of GO-CTF membranes, ensuring high rejections to organic dyes (>90%); meanwhile, the CTF nanosheets afford extra through-plane channels that significantly shorten the water transport pathway. The GO-CTF membranes exhibit a water flux of 226.3 L m^-2 h^-1 bar^-1, more than 12-fold higher than pure GO membranes. Besides, the strong chemical bonds between GO and COF render the GO-CTF membranes notably enhanced stability. Grafting of porous nanosheets onto nonporous nanosheets to acquire hybrid nanosheets as building blocks opens a new avenue to the fabrication of 2D membranes with promising application potential.

Self-Healing and Moldable Metallogels as the Recyclable Materials for Selective Dye Adsorption and Separation

Four multiresponsive and self-sustaining metallogels were synthesized by the reaction of the disodium salt of the ligand carboxymethyl-(3,5-di-tert-butyl-2-hydroxy-benzyl)amino acetic acid with Cd(II) and Zn(II) halides, which were found to show excellent selectivity for dye adsorption and separation, and one of the gels shows a rare self-healing property.