Fabrication of Photo-Responsive Mesh Membrane with Surface-Engineered Wettability for Oil-Water Separation and Photocatalytic Degradation of Organic Pollutants

A photo-responsive TiO₂-coated stainless-steel mesh membrane (TiO₂@SSM), possessing unique surface wettability, was fabricated. This TiO₂@SSM membrane is found to be capable of separating oil and water from oily water and has the potential to carry out photocatalytic self-cleaning and/or the degradation of organic pollutants present in water. The fabrication of TiO₂@SSM is quite simple: titanium dioxide (TiO₂) nanoparticles were spray-coated onto stainless steel microporous mesh (SSM) substrates and annealed at the temperature of 500 °C. The fabricated TiO₂@SSM membrane was structurally and morphologically characterized by XRD, FE-SEM, EDX, and elemental mapping. The contact angle measurements using a goniometer showed that the fabricated TiO₂@SSM membrane surface is superhydrophilic and superoleophilic in air and superoleophobic under water. This is a favorable wetting condition for the water passing oil-water separation membrane, and this water passing property of the membrane eased the common problem of the fast clogging of the membrane by oil. An oil-water separation efficiency of about 99% was achieved, when the TiO₂@SSM membrane was used as the separating medium in the gravity-driven oil-water separation system, unlike the uncoated stainless steel mesh membrane, which allowed both oil and water to pass together. This confirmed that the oil-water separating functionality of the membrane is attributed to TiO₂ coating on the stainless steel mesh. The photocatalytic degradation property of the TiO₂@SSM membrane is an added advantage, where the membrane can be potentially used for self-cleaning of the membrane's surface and/or for water purification.

Photocatalytic deactivation of sulphate reducing bacteria using visible light active CuO/TiO2 nanocomposite photocatalysts synthesized by ultrasonic processing

Sulphate-reducing bacteria wreaks havoc to oil pipelines, as it is an active agent for scale formation in the oil production tubing, and plugging of reservoir rock around the oil wells, and this leads to the degradation of oil quality. In this work, we synthesized copper oxide/titanium dioxide nanocomposite photocatalysts with three different mass contents of copper oxide (10%, 20% and 30%) and used them as an effective photo-catalyst in the process of photo-catalytic deactivation of sulphate-reducing bacteria. The anchoring of copper oxide on titanium dioxide brought about the following positive attributes in copper oxide/titanium dioxide nanocomposite pertained to the photo-catalyst: (i) the material transformed to visible light active with the potential to harness the more efficient visible spectral region of the solar radiation, (ii) increased surface area on the photo-catalyst enhanced the number of active reaction sites in the material, and (iii) efficiently retarded the undesired photo-generated electron hole recombination to promote the photo-catalytic activity. Although, the photo-catalyst effective under both UV and visible light, the deactivation was found to be higher in visible radiation, particularly the nanocomposite with 20%- copper oxide on titanium dioxide showed the highest photocatalytic degradation with of Sulphate-reducing bacteria with a decay constant as high as 1.38 min ^-1 and the total depletion time as low as 8 min. It was confirmed that the bacterial deactivation was neither due to the bactericidal effect of the nanocomposite nor due to the light mediated deactivation.

Laser Induced Anchoring of Nickel Oxide Nanoparticles on Polymeric Graphitic Carbon Nitride Sheets Using Pulsed Laser Ablation for Efficient Water Splitting under Visible Light

A visible-light-active nickel oxide-graphitic carbon nitride (NiO@g-CN) hetero-structured nanocomposite was synthesized for the first time by pulsed laser ablation in liquid and used as a photoanode material in photoelectrochemical water-splitting reaction with a solar simulator. It was found that the photoelectrochemical performance of PLAL synthesized NiO@g-CN nanocomposite as photoanode, compared to g-CN as photoanode showed fourfold enhancements in photocurrent density under visible light. FT-IR, XRD, FE-SEM, and EDX consistently showed the proper anchoring of nano-sized NiO on g-CN. UV-DRS and the band gap estimation showed the narrowing down of the band gap energy and consequent enhancement in the visible-light absorption, whereas photoluminescence spectroscopy confirmed the reduction of the recombination of photo-excited electron hole pairs as a result of the anchoring of NiO on g-CN. The photoelectrochemical performance of g-CN and the NiO@g-CN nanocomposite photoanodes was compared by linear sweep voltammetry (LSV), Chronoamperometry (I-t), and Electrochemical Impedance Spectroscopy (EIS). All of these results of the characterization studies account for the observed fourfold enhancement of photocurrent density of NiO@g-CN nanocomposite as photoanode in the photoelectrochemical reaction.

Investigation of the survival viability of cervical cancer cells (HeLa) under visible light induced photo-catalysis with facile synthesized WO3/ZnO nanocomposite

The photo catalytic degradation, a proven chemical process used for the decontamination of organic/inorganic pollutants and microorganisms in water was implemented. In this work for the selective killing of cervical cancer cells (HeLa cells) by using nano-composite of ZnO (Zinc Oxcide), WO₃ (tungsten oxide) and (n-WO₃/ZnO) as a photo-catalyst under the irradiation of visible light. All the three nanostructured semiconducting materials (WO3, ZnO and n-WO3/ZnO) were synthesized by facile chemical precipitation method and their morphological and optical characterization studies were carried out to elucidate the observed enhancement in the photo-catalytic killing of HeLa cancer cells with n-WO3/ZnO as a photo-catalyst. After 60 min of photo-catalytic reaction with n-WO₃/ZnO as a photo-catalyst, a survival viability of HeLa cancer cells as low as 15% was achieved (nearly 85% of killing), as compared to 65% of HeLa cancer cell survival viability (nearly 35% of killing) with individual use of WO₃ and ZnO as photo-catalysts under the same irradiation and experimental conditions. This improved photo-catalytic killing of HeLa cancer cells using n-WO₃/ZnO in the visible spectral region is attributed to the enhanced visible light absorption and reduced electron hole recombination, characteristically brought about in the n-WO₃/ZnO composite material. As photo-catalytic killing of the cancer cells can be selective, localized and reasonably efficient, in principle, this method can be considered as a non-invasive targeted treatment option for killing any type of cancer cells. HeLa cells, in particular are the cervical cancer cell and the tumors in and around cervix, containing HeLa cells can be non-surgically accessed and photo-catalytically treated with appropriate photo-catalyst and light source.

Synthesis, characterization and evaluation of visible light active cadmium sulfide-graphitic carbon nitride nanocomposite: A prospective solar light harvesting photo-catalyst for the deactivation of waterborne pathogen

Cadmium sulfide-graphitic carbon nitride nanocomposite was synthesized by pulsed laser ablation in liquid, and it was found from the results of optical and morphological characterizations that the proper anchoring of nanostructured cadmium sulfide on the nano-sheets of graphitic carbon nitride took place, which brought about the positive attributes such as enhanced visible light absorption and reduced photo-generated charge recombination, the key features required for an efficient photo-catalyst by solar light harvesting. The pulsed laser ablation in liquid method adopted for the synthesis of cadmium sulfide-graphitic carbon nitride has the following advantages: the shape and size of the synthesized particles can be controlled by altering the experimental parameters such as laser wavelength, pulse laser duration, the pH of the solution, the surfactants and the temperature of the solution, pulsed laser ablation in liquid method neither requires cumbersome equipment nor does it require intermediate chemicals and catalysts nor does it necessitate the post synthesis purification. The enhancement of photo-catalytic activity of cadmium sulfide-graphitic carbon nitride nanocomposite was tested for the photo-catalytic deactivation of Escherichia coli bacteria in water under visible light radiation. As anticipated, a significant improvement of photo-catalytic deactivation was observed, which is attributed to the enhanced and extended light absorption in the visible spectral region, and the formation of herterojunction between the semiconductors, which is instrumental in inhibiting the undesired recombination of photo-generated charge carriers. Quantitatively, the presence of cadmium sulfide on the graphitic carbon nitride surface contributed to a remarkable 129% increase of photo-catalytic degradation constant compared to pure graphitic carbon nitride, which resulted in the decrease of total depletion time of Escherichia coli from 156 min to 67 min with the cadmium sulfide-graphitic carbon nitride nanocomposite synthesized by pulsed laser ablation in liquid method. Our results on the efficient photo-catalytic deactivation of Escherichia coli under visible light assures that cadmium sulfide-graphitic carbon nitride nanocomposite can very well be used for photo-catalytic water purification by harvesting the abundant solar light.

Visible-light-driven conversion of organic compounds over WO3-based microtubes with mesoporous-walled structure

Pd-WO₃ microtubes demonstrated complete oxidation of dye molecules and partial oxidation of propan-2-ol with high selectivity for acetone generation.

Fabrication and Wettability Study of WO3 Coated Photocatalytic Membrane for Oil-Water Separation: A Comparative Study with ZnO Coated Membrane

Superhydrophilic and underwater superoleophobic surfaces were fabricated by facile spray coating of nanostructured WO₃ on stainless steel meshes and compared its performance in oil–water separation with ZnO coated meshes. The gravity driven oil-water separation system was designed using these surfaces as the separation media and it was noticed that WO₃ coated stainless steel mesh showed high separation efficiency (99%), with pore size as high as 150 µm, whereas ZnO coated surfaces failed in the process of oil-water separation when the pore exceeded 50 µm size. Since, nanostructured WO₃ is a well known catalyst, the simultaneous photocatalytic degradation of organic pollutants present in the separated water from the oil water separation process were tested using WO₃ coated surfaces under UV radiation and the efficiency of this degradation was found to be quite significant. These results assure that with little improvisation on the oil water separation system, these surfaces can be made multifunctional to work simultaneously for oil-water separation and demineralization of organic pollutants from the separated water. Fabrication of the separating surface, their morphological characteristics, wettability, oil water separation efficiency and photo-catalytic degradation efficiency are enunciated.

A novel Ag deposited nanocoordination polymer derived porous SnO2/NiO heteronanostructure for the enhanced photocatalytic reduction of Cr(vi) under visible light

A novel silver deposited SnO₂/NiO heteronanostructure is prepared and applied for the photocatalytic reduction of toxic aqueous Cr(vi) under visible light conditions.