2-Anilidomethylpyridine-Derived Three-Coordinate Zinc Hydride: The Journey Unveils Anilide Backbone's Reactive Nature

Low-coordinate heteroleptic zinc hydrides are catalytically important but rare and synthetically challenging. We herein report three-coordinate monomeric zinc hydride on a 2-anilidomethylpyridine framework (NNL). The synthetic success comes through systematically screening a few different routes from different precursors. During the process, the ligand's anilide backbone interestingly appears to be more reactive than Zn's terminal site to electrophilic Lewis and Brønsted acids. The proligand NNLH reacts with [Zn{N(SiMe3)2}2] and ZnEt2 to give [(NNL)ZnA] (A = N(SiMe3)2 (1), Et(2)). Both are inert to PhSiH3 and H2 but react with HBpin only through the internal Zn-Nanilide bond to give the borylated ligand NNLBpin (3). The reactions of 1 and 2 with Ph3EOH (E = C, Si) afford a series of divergent compounds like [(NNLH)Zn(OSiPh3)2] (4), [Zn3(OSiPh3)4Et2] (5), and [EtZn(OCPh3)] (6). But in all cases, it is invariably the Zn-Nanilide bond protonated by the -OH with equal or higher preference than the terminal Zn-N or Zn-C bonds. A DFT analysis rationalizes the origin of such a reactivity pattern. Realizing that an acid-free route might be the key, reacting [(NNL)Li] with ZnBr2 gives [(NNL)Zn(μ-Br)]2 (7), which on successively treating with KOSiPh3 and PhSiH3 gives the desired [(NNL)ZnH] (8) as a three-coordinate monomer with a terminal Zn-H bond. Estimating the ligand steric in 8 shows the openness in Zn's coordination sphere, a desired criterion for efficient catalysis. This and a positive influence of the pyridyl sidearm is reflected in 8's superior activity in hydroborating PhC(O)Me by HBpin in comparison to Jones' two-coordinate anilido zinc hydride.

Zinc Catalyzed Hydroboration of Esters and Nitriles with Pinacolborane

We developed a bench-stable iminopyridine-ligated zinc complex for the effective catalytic hydroboration of esters and nitriles under solvent-free conditions. Various esters and nitriles bearing different functionalities were selectively reduced to form corresponding alcohols and amines in good yields. Detailed Hammett plots are provided to explain the electronic effects on the phenyl ring.

Catalytic, Z-Selective, Semi-Hydrogenation of Alkynes with a Zinc-Anilide Complex

The reversible activation of dihydrogen with a molecular zinc anilide complex is reported. The mechanism of this reaction has been probed through stoichiometric experiments and density functional theory (DFT) calculations. The combined evidence suggests that H₂ activation occurs by addition across the Zn-N bond via a four-membered transition state in which the Zn and N atoms play a dual role of Lewis acid and Lewis base. The zinc hydride complex that results from H₂ addition has been shown to be remarkably effective for the hydrozincation of C═C bonds at modest temperatures. The scope of hydrozincation includes alkynes, alkenes, and a 1,3-butadiyne. For alkynes, the hydrozincation step is stereospecific leading exclusively to the syn-isomer. Competition experiments show that the hydrozincation of alkynes is faster than the equivalent alkene substrates. These new discoveries have been used to develop a catalytic system for the semi-hydrogenation of alkynes. The catalytic scope includes both aryl- and alkyl-substituted internal alkynes and proceeds with high alkene: alkane, Z:E ratios, and modest functional group tolerance. This work offers a first example of selective hydrogenation catalysis using zinc complexes.

Thermally stable zinc hydride catalyst for hydrosilylation of CO2 to silyl formate at atmospheric pressure

Neutral zinc complexes supported by H[PNNO], a diaminophenolate ligand bearing a pendant phosphine group, were synthesized and characterized. The phosphine arm adopts two different configurations in solution and prevents aggregation. The monomeric zinc hydride complex is stable at elevated temperatures up to 125 °C and reacts readily with CO₂ to afford a zinc formate complex. The zinc hydride is active for CO₂ hydrosilylation at atmospheric CO₂ pressure and is selective for CO₂ reduction to the silyl-formate product.

Synthesis of bis(2-pyridylthio)methyl zinc hydride and catalytic hydrosilylation and hydroboration of CO2

The reactions of bis(2-pyridylthio)methane with Me₂Zn and Zn[N(SiMe₃)₂]₂ afford [Bptm]ZnMe and [Bptm]ZnN(SiMe₃)₂, thereby providing access to a variety of other [Bptm]ZnX derivatives, including the zinc hydride complex [Bptm]ZnH, which serves as a catalyst for the reduction of CO₂ and other carbonyl compounds via hydrosilylation and hydroboration.

The transition metal-catalysed hydroboration reaction

This review covers the development of the transition metal-catalysed hydroboration reaction, from its beginnings in the 1980s to more recent developments including earth-abundant catalysts and an ever-expanding array of substrates.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Synthesis, Structure, and Reactivity of a Terminal Cadmium Hydride Compound, [κ3-TismPriBenz]CdH

The terminal cadmium hydride compound, [κ³-Tism^PriBenz]CdH, which features the tris[(1-isopropylbenzimidazol-2-yl)dimethylsilyl]methyl ligand, may be obtained via the reactions of either [κ³-Tism^PriBenz]CdN(SiMe₃)₂ or [Tism^PriBenz]CdOSiPh₃ with PhSiH₃. The Cd-H bond of [κ³-Tism^PriBenz]CdH undergoes (a) metathesis reactions with MeI, Me₃SiX (X = Cl, Br, I, NCO), and Me₃SnX (X = Cl, Br, I) to afford the corresponding [Tism^PriBenz]CdX derivative, (b) insertion with CO₂ and CS₂ to afford respectively [Tism^PriBenz]Cd(κ¹-O₂CH) and [Tism^PriBenz]Cd(κ¹-S₂CH), and (c) hydride abstraction with B(C₆F₅)₃ to afford {[Tism^PriBenz]Cd}[HB(C₆F₅)₃] that possesses a rare trigonal monopyramidal geometry for cadmium.

Hydrosilane σ-Adduct Intermediates in an Adaptive Zinc-Catalyzed Cross-dehydrocoupling of Si-H and O-H Bonds

Three-coordinate Ph BOXMe 2 ZnR (Ph BOXMe 2 =phenyl-(4,4-dimethyl-oxazolinato; R=Me: 2 a, Et: 2 b) catalyzes the dehydrocoupling of primary or secondary silanes and alcohols to give silyl ethers and hydrogen, with high turnover numbers (TON; up to 107 ) under solvent-free conditions. Primary and secondary silanes react with small, medium, and large alcohols to give various degrees of substitution, from mono- to tri-alkoxylation, whereas tri-substituted silanes do not react with MeOH under these conditions. The effect of coordinative unsaturation on the behavior of the Zn catalyst is revealed through a dramatic variation of both rate law and experimental rate constants, which depend on the concentrations of both the alcohol and hydrosilane reactants. That is, the catalyst adapts its mechanism to access the most facile and efficient conversion. In particular, either alcohol or hydrosilane binds to the open coordination site on the Ph BOXMe 2 ZnOR catalyst to form a Ph BOXMe 2 ZnOR(HOR) complex under one set of conditions or an unprecedented σ-adduct Ph BOXMe 2 ZnOR(H-SiR'3 ) under other conditions. Saturation kinetics provide evidence for the latter species, in support of the hypothesis that σ-bond metathesis reactions involving four-centered electrocyclic 2σ-2σ transition states are preceded by σ-adducts.

Zinc Hydride Catalyzed Chemoselective Hydroboration of Isocyanates: Amide Bond Formation and C=O Bond Cleavage

Herein, a remarkable conjugated bis-guanidinate (CBG) supported zinc hydride, [{LZnH}₂ ; L={(ArHN)(ArN)-C=N-C=(NAr)(NHAr); Ar=2,6-Et₂ -C₆ H₃ }] (I) catalyzed partial reduction of heteroallenes via hydroboration is reported. A large number of aryl and alkyl isocyanates, including electron-donating and withdrawing groups, undergo reduction to obtain selectively N-boryl formamide, bis(boryl) hemiaminal and N-boryl methyl amine products. The compound I effectively catalyzes the chemoselective reduction of various isocyanates, in which the construction of the amide bond occurs. Isocyanates undergo a deoxygenation hydroboration reaction, in which the C=O bond cleaves, leading to N-boryl methyl amines. Several functionalities such as nitro, cyano, halide, and alkene groups are well-tolerated. Furthermore, a series of kinetic, control experiments and structurally characterized intermediates suggest that the zinc hydride species are responsible for all reduction steps and breaking the C=O bond.

Cationic Zinc Hydride Catalyzed Carbon Dioxide Reduction to Formate: Deciphering Elementary Reactions, Isolation of Intermediates, and Computational Investigations

Zinc has been an element of choice for carbon dioxide reduction in recent years. Zinc compounds have been showcased as catalysts for carbon dioxide hydrosilylation and hydroboration. The extent of carbon dioxide reduction can depend on various factors, including electrophilicity at the zinc center and the denticity of the ancillary ligands. In a few cases, the addition of Lewis acids to zinc hydride catalysts markedly influences carbon dioxide reduction. These factors have been investigated by exploring elementary reactions of carbon dioxide hydrosilylation and hydroboration by using cationic zinc hydrides bearing tetradentate tris[2-(dimethylamino)ethyl]amine and tridentate N,N,N',N'',N''-pentamethyldiethylenetriamine in the presence of triphenylborane and tris(pentafluorophenyl)borane.

Hydroboration of nitriles and imines by highly active zinc dihydride catalysts

Eco-friendly zinc dihydrides stabilized by N-heterocyclic carbenes were demonstrated to be highly efficient catalysts for the double hydroboration of nitriles with pinacolborane, exhibiting turnover frequencies up to 3000 h⁻¹ at room temperature under solvent-free conditions. The reactions afforded corresponding diboronated amines with excellent yields and good functional group tolerance. A single Zn–H insertion product was isolated from a stoichiometric reaction of zinc dihydride with nitrile, and was proved to be an active species in this transformation. Kinetic studies were performed to give some insights into the catalytic reactions. In addition, zinc dihydride species also showed high activity for the hydroboration of imines to boronated amines.

Molecular zinc dihydrides were found to be highly efficient catalysts for the hydroboration of nitriles and imines at room temperature under solvent-free conditions.

Molecular Zinc Hydride Cations [ZnH]+ : Synthesis, Structure, and CO2 Hydrosilylation Catalysis

Protonolysis of [ZnH2 ]n with the conjugated Brønsted acid of the bidentate diamine TMEDA (N,N,N',N'-tetramethylethane-1,2-diamine) and TEEDA (N,N,N',N'-tetraethylethane-1,2-diamine) gave the zinc hydride cation [(L2 )ZnH]+ , isolable either as the mononuclear THF adduct [(L2 )ZnH(thf)]+ [BArF 4 ]- (L2 =TMEDA; BArF 4 - =[B(3,5-(CF3 )2 -C6 H3 )4 ]- ) or as the dimer [{(L2 )Zn)}2 (μ-H)2 ]2+ [BArF 4 ]- 2 (L2 =TEEDA). In contrast to [ZnH2 ]n , the cationic zinc hydrides are thermally stable and soluble in THF. [(L2 )ZnH]+ was also shown to form di- and trinuclear adducts of the elusive neutral [(L2 )ZnH2 ]. All hydride-containing cations readily inserted CO2 to give the corresponding formate complexes. [(TMEDA)ZnH]+ [BArF 4 ]- catalyzed the hydrosilylation of CO2 with tertiary hydrosilanes to give stepwise formoxy silane, methyl formate, and methoxy silane. The unexpected formation of methyl formate was shown to result from the zinc-catalyzed transesterification of methoxy silane with formoxy silane, which was eventually converted into methoxy silane as well.

Zinc Hydride-Catalyzed Hydrofuntionalization of Ketones

Three new dimeric bis-guanidinate zinc(II) alkyl, halide, and hydride complexes [LZnEt]₂ (1), [LZnI]₂ (2) and [LZnH]₂ (3) were prepared. Compound 3 was successfully employed for the hydrosilylation and hydroboration of a vast number of ketones. The catalytic performance of 3 in the hydroboration of acetophenone exhibits a turnover frequency, reaching up to 5800 h^-1, outperforming that of reported zinc hydride catalysts. Notably, both intra- and intermolecular chemoselective hydrosilylation and hydroboration reactions have been investigated.

Highly Active Superbulky Alkaline Earth Metal Amide Catalysts for Hydrogenation of Challenging Alkenes and Aromatic Rings

Two series of bulky alkaline earth (Ae) metal amide complexes have been prepared: Ae[N(TRIP)2 ]2 (1-Ae) and Ae[N(TRIP)(DIPP)]2 (2-Ae) (Ae=Mg, Ca, Sr, Ba; TRIP=SiiPr3 , DIPP=2,6-diisopropylphenyl). While monomeric 1-Ca was already known, the new complexes have been structurally characterized. Monomers 1-Ae are highly linear while the monomers 2-Ae are slightly bent. The bulkier amide complexes 1-Ae are by far the most active catalysts in alkene hydrogenation with activities increasing from Mg to Ba. Catalyst 1-Ba can reduce internal alkenes like cyclohexene or 3-hexene and highly challenging substrates like 1-Me-cyclohexene or tetraphenylethylene. It is also active in arene hydrogenation reducing anthracene and naphthalene (even when substituted with an alkyl) as well as biphenyl. Benzene could be reduced to cyclohexane but full conversion was not reached. The first step in catalytic hydrogenation is formation of an (amide)AeH species, which can form larger aggregates. Increasing the bulk of the amide ligand decreases aggregate size but it is unclear what the true catalyst(s) is (are). DFT calculations suggest that amide bulk also has a noticeable influence on the thermodynamics for formation of the (amide)AeH species. Complex 1-Ba is currently the most powerful Ae metal hydrogenation catalyst. Due to tremendously increased activities in comparison to those of previously reported catalysts, the substrate scope in hydrogenation catalysis could be extended to challenging multi-substituted unactivated alkenes and even to arenes among which benzene.

Acyclic 1,2-dimagnesioethanes/-ethene derived from magnesium(i) compounds: multipurpose reagents for organometallic synthesis

Reactions of three magnesium(i) dimers, [{(ArNacnac)Mg-}2] (ArNacnac = [(ArNCMe)2CH]-; Ar = xylyl (Xyl), mesityl (Mes) or 2,6-diethylphenyl (Dep)), with either 1,1-diphenylethylene (DPE), α-methylstyrene (MS), trans-stilbene (TS) or diphenylacetylene (DPA) led to the 1,2-addition of the Mg-Mg bond across the substrate, giving rise to the 1,2-dimagnesioethanes, [{(XylNacnac)Mg}2(μ-DPE)], [{(DepNacnac)Mg}2(μ-MS)], [{(ArNacnac)Mg}2(μ-TS)] (Ar = Mes or Dep); and a 1,2-dimagnesioethene, [{(MesNacnac)Mg}2(μ-DPA)]. The reactions involving the 1,1-substituted alkenes are shown to be readily redox reversible, in that the reaction products are in equilibrium with a significant proportion of the starting materials at room temperature. Variable temperature NMR spectroscopy and a van't Hoff analysis point to low kinetic barriers to these weakly exergonic reactions. [{(MesNacnac)Mg}2(μ-DPE)] and [{(MesNacnac)Mg}2(μ-DPA)] behave as 1,2-di-Grignard reagents in their reactions with very bulky amido-zinc bromides, yielding the first examples of a 1,2-dizincioethane, [(L*Zn)2(μ-DPE)] (L* = -N(Ar*)(SiPri 3); Ar* = C6H2Me{C(H)Ph2}2-4,2,6), and a 1,2-dizincioethene, [(TBoLZn)2(μ-DPA)] (TBoL = -N(SiMe3){B(DipNCH)2}, Dip = 2,6-diisopropylphenyl), respectively. Divergent reactivity is shown for [{(MesNacnac)Mg}2(μ-DPE)], which behaves as a two-electron reducing agent when treated with amido-cadmium and amido-magnesium halide precursors, yielding the cadmium(i) and magnesium(i) dimers, [PhBoLCdCdPhBoL] (PhBoL = -N(SiPh3){B(DipNCH)2}) and [L†MgMgL†] (L† = -N(Ar†)(SiMe3); Ar† = C6H2Pri{C(H)Ph2}2-4,2,6), respectively. A further class of reactivity for [{(MesNacnac)Mg}2(μ-DPE)] derives from its reaction with the bulky amido-germanium chloride, L*GeCl, which gives a magnesio-germane, presumably via intramolecular C-H activation of a highly reactive magnesiogermylene intermediate, [:Ge(L*){Mg(MesNacnac)}]. [{(MesNacnac)Mg}2(μ-DPE)] can be considered as acting as a two-electron reducing, magnesium transfer reagent in this reaction.

Terminal hydridozinc cation

Thermally stable hydridozinc cation catalytically converts CO₂ to PhSi(OCHO)₃ using PhSiH₃ in the presence of a mild Lewis acid BPh₃.

Contrasting reactivity of (boryl)(aryl)lithium-amide with electrophiles: N- vs. p-aryl-C-nucleophilic substitution

Herein we report two different reactivity modes of lithium(aryl)(boryl)amide, 4, when it is reacted with chlorosilanes such as SiCl4 and MeSiHCl2, and chlorophosphine, Ph2PCl. Thus, the reaction of lithium(aryl)(boryl)amide, 4, with MeSiHCl2 leads exclusively to an N-substitution product, 6. On the other hand, the reaction of 4 with SiCl4 and Ph2PCl proceeds completely differently affording exclusively p-aryl-C-substitution products, 5 and 7, respectively.

Neutral and anionic zinc compounds supported by a bis(imino)phenyl NCN ligand

The new zinc complexes 2,6-(ArNCH)₂C₆H₃ZnBu (6) and 2,6-(ArNCH)₂C₆H₃ZnCl₂Li(THF)₃ (7), supported by a bis(imino)phenyl NCN pincer ligand, were prepared (Ar = 2,6-ⁱPr₂C₆H₃).

Redox transmetallation approaches to the synthesis of extremely bulky amido-lanthanoid(ii) and -calcium(ii) complexes

Redox transmetallation protolysis and direct redox transmetallation reactions have been employed to access a variety of extremely bulky amido-lanthanoid(ii), and related calcium(ii) complexes which cannot be prepared using classical salt metathesis pathways.

Investigation of N-Heterocyclic Carbene-Supported Group 12 Triflates as Pre-catalysts for Hydrosilylation/Borylation

N-Heterocyclic carbene (NHC) complexes of Cd and Hg triflates (OTf) were prepared and their attempted conversion into rare cadmium and mercury hydrides was explored. In contrast to zinc, which forms stable [ZnH]⁺ complexes with NHCs, the heavier Cd and Hg congeners could not be formed; the increased instability of Cd-H and Hg-H units was rationalized with the aid of computations. It was also discovered that the dimeric adduct [IPr⋅Cd(μ-OTf)₂ ]₂ (IPr=[(HCNDipp)₂ C:]; Dipp=2,6-iPr₂ C₆ H₃ ) is an active precatalyst for the hydrosilylation and hydroborylation of hindered aldehydes and ketones. The related zinc congener was inactive as a catalyst highlighting a distinct advantage of using heavy Group 12 metals to promote catalytic hydrosilylation/borylation.