Pilot-Scale Synthesis Sodium Iron Fluorophosphate Cathode with High Tap Density for a Sodium Pouch Cell

Sodium-ion batteries (SIBs) have attracted wide interest for energy storage because of the sufficient sodium element reserve on the earth; however, the electrochemical performance of SIBs cannot achieve the requirements so far, especially, the limitation of cathode materials. Here, a kilogram-scale route to synthesize Na₂ FePO₄ F/carbon/multi-walled carbon nanotubes microspheres (NFPF@C@MCNTs) composite with a high tap density of 1.2 g cm^-3 is reported. The NFPF@C@MCNTs cathode exhibits a reversible specific capacity of 118.4 mAh g^-1 at 0.1 C. Even under 5 C with high mass loading (10 mg cm^-2 ), the specific capacity still maintains at 56.4 mAh g^-1 with a capacity retention rate of 97% after 700 cycles. In addition, a hard carbon||NFPF@C@MCNTs pouch cell is assembled and tested, which exhibits a volumetric energy density of 325 Wh L^-1 and gravimetrical energy density of 210 Wh kg^-1 (base on electrode massing), and it provides more than 200 cycles with a capacity retention rate of 92%. Furthermore, the pouch cell can operate in an all-climate environment ranging from -40 to 80 °C. These results demonstrate that the NFPF@C@MCNTs microspheres are a promising candidate cathode for SIBs and facilitate its practical application in sodium cells.

Assessing the local structure and quantifying defects in Ca4Fe9O17 combining STEM and FAULTS

Defects in crystalline structures play a vital role in their properties, so their proper characterization is essential to understanding and improving the behaviour of the materials.

A Ni-doping-induced phase transition and electron evolution in cobalt hexacyanoferrate as a stable cathode for sodium-ion batteries

Prussian blue analogues are potential competitive energy storage materials due to their diverse metal combinations and wide three-dimensional ion channels. Here, we prepared a new highly crystalline monoclinic nickel-doped cobalt hexacyanoferrate via a feasible and simple one-step co-precipitation method. In the process of sodium-ion de-intercalation, three stable charge and discharge platforms, which are consistent with the cyclic voltammetry performance, are seen for the first time, showing the function of nickel ions in Prussian blue. Furthermore, the charge transfer and structural evolution caused by the transmission of sodium ions were well revealed via ex situ XRD, ex situ XPS, and in situ EIS studies. Simulation calculations are performed relating to the energy band structure and the highest-occupied bonding orbitals of the system in different charge states, revealing the charge and discharge mechanism of the nickel-doped material and the reason for the emergence of the new platform at low voltages. In addition, NaNi0.17Co0.83Fe(CN)6 also delivers a striking capacity of 146 mA h g-1 and superior cyclability, with 93% capacity retention over 100 cycles; it can be considered as a promising alternative cathode material for use in sodium-ion batteries.

Anionic Redox Processes in Maricite- and Triphylite-NaFePO4 of Sodium-Ion Batteries

In recent years, NaFePO₄ has been regarded as one of the most promising cathode materials for next-generation rechargeable sodium-ion batteries. There is significant interest in the redox processes of rechargeable batteries for high capacity applications. In this paper, the redox processes of triphylite-NaFePO₄ and maricite-NaFePO₄ materials have been analyzed based on first-principles calculations and analysis of Bader charges. Different from LiFePO₄, anionic (O^2-) redox reactions are evidently visible in NaFePO₄. Electronic structures and density of states are calculated to elaborate the charge transfer and redox reactions during the desodiation processes. Furthermore, we also calculate the formation energies of sodium extraction, convex hull, average voltage plateaus, and volume changes of Na_1-x/12FePO₄ with different sodium compositions. Deformation charge density plots and magnetization for NaFePO₄ are also calculated to help understand the redox reaction processes.

Polyanion-type cathode materials for sodium-ion batteries

This review summarizes the recent progress and remaining challenges of polyanion-type cathodes, providing guidelines towards high-performance cathodes for sodium ion batteries.

Exploring the Role of Manganese on Structural, Transport, and Electrochemical Properties of NASICON-Na3Fe2-yMny(PO4)3-Cathode Materials for Na-Ion Batteries

Given the extensive efforts focused on protecting the environment, eco-friendly cathode materials are a prerequisite for the development of Na-ion battery technology. Such materials should contain abundant and inexpensive elements. In the paper, we present NASICON-Na₃Fe_2-yMn_y(PO₄)₃ (y = 0, 0.1, 0.2, 0.3, and 0.4) cathode materials, which meet these requirements. Na₃Fe_2-yMn_y(PO₄)₃ compounds were prepared via a solid-state reaction at 600 °C, which allowed to obtain powders with submicron particles. The presence of manganese in the iron sub-lattice inhibits phase transitions, which occurs at ∼95 and ∼145 °C in Na₃Fe₂(PO₄)₃, changing the monoclinic structure to rhombohedral and affecting the structural and transport properties. The chemical stability of Na₃Fe_2-yMn_y(PO₄)₃ was thus higher than that of Na₃Fe₂(PO₄)₃, and it also exhibited enhanced structural, transport, and electrochemical properties. The observed correlation between the chemical composition and electrochemical properties proved the ability to precisely tune the crystal structure of NASICONs, allowing cathode materials with more desirable properties to be designed.

Magnetism of NaFePO4 and related polyanionic compounds

Magnetic properties of maricite (m) and triphlyte (t) polymorphs of NaFePO4 are investigated by combining ab initio density functional theory with a model Hamiltonian approach, where a realistic Hubbard-type model for magnetic Fe 3d states in NaFePO4 is constructed entirely from first-principles calculations. For these purposes, we perform a comparative study based on the pseudopotential and linear muffin-tin orbital methods while tackling the problem of parasitic non-sphericity of the exchange-correlation potential. Upon calculating the model parameters, magnetic properties are studied by applying the mean-field Hartree-Fock approximation and the theory of superexchange interactions to extract the corresponding interatomic exchange parameters. Despite some differences, the two methods provide a consistent description of the magnetic properties of NaFePO4. On the one hand, our calculations reproduce the correct magnetic ordering for t-NaFePO4 allowing for magnetoelectric effect, and the theoretical values of Néel and Curie-Weiss temperatures are in fair agreement with reported experimental data. Furthermore, we investigate the effect of chemical pressure on magnetic properties by substituting Na with Li and, in turn, we explain how a noncollinear magnetic alignment induced by an external magnetic field leads to magnetoelectric effect in NaFePO4 and other transition-metal phosphates. However, the origin of a magnetic superstructure with q = (1/2, 0, 1/2) observed experimentally in m-NaFePO4 remains puzzling. Instead, we predict that competing exchange interactions can lead to the formation of magnetic superstructures along the shortest orthorhombic c axis of m-NaFePO4, similar to multiferroic manganites.

Phosphate Framework Electrode Materials for Sodium Ion Batteries

Sodium ion batteries (SIBs) have been considered as a promising alternative for the next generation of electric storage systems due to their similar electrochemistry to Li-ion batteries and the low cost of sodium resources. Exploring appropriate electrode materials with decent electrochemical performance is the key issue for development of sodium ion batteries. Due to the high structural stability, facile reaction mechanism and rich structural diversity, phosphate framework materials have attracted increasing attention as promising electrode materials for sodium ion batteries. Herein, we review the latest advances and progresses in the exploration of phosphate framework materials especially related to single-phosphates, pyrophosphates and mixed-phosphates. We provide the detailed and comprehensive understanding of structure-composition-performance relationship of materials and try to show the advantages and disadvantages of the materials for use in SIBs. In addition, some new perspectives about phosphate framework materials for SIBs are also discussed. Phosphate framework materials will be a competitive and attractive choice for use as electrodes in the next-generation of energy storage devices.

Crystal chemistry of Mg substitution in NaMnPO4olivine: concentration limit and cation distribution

In Mg-substituted NaMnPO₄, Na⁺, Mg²⁺and metal vacancies reside in the M1 olivine position, while Mn²⁺ions are predominantly in the M2 position.