"Smart poisoning" of Co/SiO2 catalysts by sulfidation for chirality-selective synthesis of (9,8) single-walled carbon nanotubes

Versatile Types of Inorganic/Organic NIR-IIa/IIb Fluorophores: From Strategic Design toward Molecular Imaging and Theranostics

In vivo imaging in the second near-infrared window (NIR-II, 1000-1700 nm), which enables us to look deeply into living subjects, is producing marvelous opportunities for biomedical research and clinical applications. Very recently, there has been an upsurge of interdisciplinary studies focusing on developing versatile types of inorganic/organic fluorophores that can be used for noninvasive NIR-IIa/IIb imaging (NIR-IIa, 1300-1400 nm; NIR-IIb, 1500-1700 nm) with near-zero tissue autofluorescence and deeper tissue penetration. This review provides an overview of the reports published to date on the design, properties, molecular imaging, and theranostics of inorganic/organic NIR-IIa/IIb fluorophores. First, we summarize the design concepts of the up-to-date functional NIR-IIa/IIb biomaterials, in the order of single-walled carbon nanotubes (SWCNTs), quantum dots (QDs), rare-earth-doped nanoparticles (RENPs), and organic fluorophores (OFs). Then, these novel imaging modalities and versatile biomedical applications brought by these superior fluorescent properties are reviewed. Finally, challenges and perspectives for future clinical translation, aiming at boosting the clinical application progress of NIR-IIa and NIR-IIb imaging technology are highlighted.

Metallicity-Dependent Ultrafast Water Transport in Carbon Nanotubes

Carbon nanotubes (CNTs) with hydrophobic and atomically smooth inner channels are promising for building ultrahigh-flux nanofluidic platforms for energy harvesting, health monitoring, and water purification. Conventional wisdom is that nanoconfinement effects determine water transport in CNTs. Here, using full-atomistic molecular dynamics simulations, it is shown that water transport behavior in CNTs strongly correlates with the electronic properties of single-walled CNTs (metallic (met) vs semiconducting (s/c)), which is as dominant as the effect of nanoconfinement. Three pairs of CNTs (i.e., (8,8)_met , 10.85 Å vs (9,7)_s/c , 10.88 Å; (9,8)_s/c , 11.53 Å vs (10,7)_met , 11.59 Å; and (9,9)_met , 12.20 Å vs (10,8)_s/c , 12.23 Å) are used to investigate the roles of diameter and metallicity. Specifically, the (9,8)_s/c can restrict the hydrogen-bonding-mediated structuring of water and give the highest reduction in carbon-water interaction energy, providing an extraordinarily high water flux, around 250 times that of the commercial reverse osmosis membranes and approximately fourfold higher than the flux of the state-of-the-art boron nitrate nanotubes. Further, the high performance of (9,8)_s/c is also reproducible when embedded in lipid bilayers as synthetic high-water flux porins. Given the increasing availability of high-purity CNTs, these findings provide valuable guides for realizing novel CNT-enhanced nanofluidic systems.

Chirality Pure Carbon Nanotubes: Growth, Sorting, and Characterization

Single-walled carbon nanotubes (SWCNTs) have been attracting tremendous attention owing to their structure (chirality) dependent outstanding properties, which endow them with great potential in a wide range of applications. The preparation of chirality-pure SWCNTs is not only a great scientific challenge but also a crucial requirement for many high-end applications. As such, research activities in this area over the last two decades have been very extensive. In this review, we summarize recent achievements and accumulated knowledge thus far and discuss future developments and remaining challenges from three aspects: controlled growth, postsynthesis sorting, and characterization techniques. In the growth part, we focus on the mechanism of chirality-controlled growth and catalyst design. In the sorting part, we organize and analyze existing literature based on sorting targets rather than methods. Since chirality assignment and quantification is essential in the study of selective preparation, we also include in the last part a comprehensive description and discussion of characterization techniques for SWCNTs. It is our view that even though progress made in this area is impressive, more efforts are still needed to develop both methodologies for preparing ultrapure (e.g., >99.99%) SWCNTs in large quantity and nondestructive fast characterization techniques with high spatial resolution for various nanotube samples.

Pt-Co Alloy Nanoparticles on a γ-Al2 O3 Support: Synergistic Effect between Isolated Electron-Rich Pt and Co for Automotive Exhaust Purification

There is interest in minimizing or eliminating the use of Pt in catalysts by replacing it with more widely abundant and cost-effective elements. The alloying of Pt with non-noble metals is a potential strategy for reducing Pt use because interactions between Pt and non-noble metals can modify the catalyst structure and electronic properties. Here, a γ-Al₂ O₃ -supported bimetallic catalyst [Pt(0.1)Co(1)/Al₂ O₃ ] was prepared which contained 0.1 wt % Pt and 1 wt % Co and thus featured an extremely low Pt : Co ratio (<1 : 30 mol/mol). The Pt and Co in this catalyst formed alloy nanoparticles in which isolated electron-rich Pt atoms were present on the nanoparticle surface. The activity of this Pt(0.1)Co(1)/Al₂ O₃ catalyst for the purification of automotive exhaust was comparable to the activities of 0.3 and 0.5 wt % Pt/γ-Al₂ O₃ catalysts. Electron-rich Pt and metallic Co promoted activation of NO_x and oxidization of CO and hydrocarbons, respectively. This strategy of tuning the surrounding structure and electronic state of a noble metal by alloying it with an excess of a non-noble metal will enable reduced noble metal use in catalysts for exhaust purification and other environmentally important reactions.

Metal-Support Interactions in CeO2- and SiO2-Supported Cobalt Catalysts: Effect of Support Morphology, Reducibility, and Interfacial Configuration

With the increasing demand for highly efficient and durable catalysts, researchers have been doing extensive research to engineer the shape, size, and even phase (e.g., hcp or fcc Co) of individual catalyst nanoparticles, as well as the interface structure between the catalyst and support. In this work, cobalt oxides were deposited on ceria with rod-like morphology (CeO₂NR) and cube-like morphology (CeO₂NC) and silica with sphere-like morphology (SiO₂NS) via a precipitation-deposition method to investigate the effects of support morphology, surface defects, support reducibility, and the metal-support interactions on redox and catalytic properties. XRD, Raman, XPS, BET, H₂-TPR, O₂-TPD, CO-TPD, TEM, and TPR/TPO cycling measurements have been mainly employed for catalysts characterization. Compared with CeO₂NC and SiO₂NS supports, as well as CeO₂NC- and SiO₂NS-supported cobalt catalysts, CeO₂NR counterparts exhibited enhanced reducibility and CO oxidation performance at a lower temperature. Both the apparent activation energy and CO conversion demonstrated the following catalytic activity order: 10 wt % CoO _x/CeO₂NR > 10 wt % CoO _x/CeO₂NC > 10 wt % CoO _x/SiO₂NS. These results showed a strong support-dependent reducibility, CO oxidation, and redox cycling activity/stability of the as-prepared catalysts. Moreover, the significantly enhanced catalytic CO oxidation of the 10 wt % CoO _x/CeO₂NR catalyst indicated the vital role of CeO₂NR support with rich surface oxygen vacancies, superior oxygen storage capacity and mobility, and excellent adsorption/desorption behavior of CO and O₂ species.

Designing Catalysts for Chirality-Selective Synthesis of Single-Walled Carbon Nanotubes: Past Success and Future Opportunity

A major obstacle for the applications of single-walled carbon nanotubes (SWNTs) in electronic devices is their structural diversity, ending in SWNTs with diverse electrical properties. Catalytic chemical vapor deposition has shown great promise in directly synthesizing high-quality SWNTs with a high selectivity to specific chirality (n, m). During the growth process, the tube-catalyst interface plays crucial roles in regulating the SWNT nucleation thermodynamics and growth kinetics, ultimately governing the SWNT chirality distribution. Starting with the introduction of SWNT growth modes, this review seeks to extend the knowledge about chirality-selective synthesis by clarifying the energetically favored SWNT cap nucleation and the threshold step for SWNT growth, which describes how the tube-catalyst interface affects both the nucleus energy and the new carbon atom incorporation. Such understandings are subsequently applied to interpret the (n, m) specific growth achieved on a variety of templates, such as SWNT segments or predefined molecular seeds, transition metal (Fe, Co and Ni)-containing catalysts at low reaction temperatures, W-based alloy catalysts, and metal carbides at relatively high reaction temperatures. The up to date achievements on chirality-controlled synthesis of SWNTs is summarized and the remaining major challenges existing in the SWNT synthesis field are discussed.

Synthesis, purification, properties and characterization of sorted single-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) have attracted significant attention due to their outstanding mechanical, chemical and optoelectronic properties, which makes them promising candidates for use in a wide range of applications. However, as-produced SWCNTs have a wide distribution of various chiral species with different properties (i.e. electronic structures). In order to take full advantage of SWCNT properties, highly purified and well-separated SWCNTs are of great importance. Recent advances have focused on developing new strategies to effectively separate nanotubes into single-chirality and/or semiconducting/metallic species and integrating them into different applications. This review highlights recent progress in this cutting-edge research area alongside the enormous development of their identification and structural characterization techniques. A comprehensive review of advances in both controlled synthesis and post-synthesis separation methods of SWCNTs are presented. The relationship between the unique structure of SWCNTs and their intrinsic properties is also discussed. Finally, important future directions for the development of sorting and purification protocols for SWCNTs are provided.

Chirality-Controlled Synthesis and Applications of Single-Wall Carbon Nanotubes

Preparation of chirality-defined single-wall carbon nanotubes (SWCNTs) is the top challenge in the nanotube field. In recent years, great progress has been made toward preparing single-chirality SWCNTs through both direct controlled synthesis and postsynthesis separation approaches. Accordingly, the uses of single-chirality-dominated SWCNTs for various applications have emerged as a new front in nanotube research. In this Review, we review recent progress made in the chirality-controlled synthesis of SWCNTs, including metal-catalyst-free SWCNT cloning by vapor-phase epitaxy elongation of purified single-chirality nanotube seeds, chirality-specific growth of SWCNTs on bimetallic solid alloy catalysts, chirality-controlled synthesis of SWCNTs using bottom-up synthetic strategy from carbonaceous molecular end-cap precursors, etc. Recent major progresses in postsynthesis separation of single-chirality SWCNT species, as well as methods for chirality characterization of SWCNTs, are also highlighted. Moreover, we discuss some examples where single-chirality SWCNTs have shown clear advantages over SWCNTs with broad chirality distributions. We hope this review could inspire more research on the chirality-controlled preparation of SWCNTs and equally important inspire the use of single-chirality SWCNT samples for more fundamental studies and practical applications.