Biocompatible non-leachable antimicrobial polymers with a nonionic hyperbranched backbone and phenolic terminal units

This work aimed to develop biocompatible non-leachable antimicrobial polymers without ionic structures. A series of nonionic hyperbranched polymers (HBPs) with an isatin-based backbone and phenolic terminal units were synthesized and characterized. The molecular structures and thermal properties of the obtained HBPs were characterized by SEC, NMR, FTIR, TGA and DSC analyses. Disk diffusion assay revealed significant antibacterial activity of the obtained phenolic HBPs against nine different pathogenic bacteria. The presence of a methoxy or long alkyl group close to the phenolic unit enhanced the antibacterial effect against certain Gram positive and negative bacteria. The obtained nonionic HBPs were blended in polyester poly(hexamethylene terephthalate) films, which showed no noticeable leakage after being immersed in water for 5 days. Finally, these HBPs showed no cytotoxicity effect to MG-63 osteoblast-like human cells according to MTT analysis, and negligible hemolytic effect.

Nonionic nontoxic antimicrobial polymers: indole-grafted poly(vinyl alcohol) with pendant alkyl or ether groups

A series of new nonionic antimicrobial polymers with a biodegradable polyvinyl alcohol (PVA) backbone grafted with indole units and different hydrophobic alkyl or ether groups were synthesized by facile esterification.

Synthesis of N-Methylmorpholinium Derivatives Possessing a 1,3,4-Oxadiazole Core as Feasible Antibacterial Agents against Plant Bacterial Diseases

To develop a kind of quaternary ammonium compounds that can safely apply in agriculture for managing the plant bacterial diseases, herein, a series of N-methylmorpholinium derivatives possessing a classical 1,3,4-oxadiazole core were prepared and the antibacterial activities both in vitro and in vivo were screened. Bioassay results revealed that compounds 3l and 3i showed the strongest antibacterial activity toward pathogens Xanthomonas oryzae pv. oryzae and X. axonopodis pv. citri with the lowest EC50 values of 1.40 and 0.90 μg/mL, respectively. Phytotoxicity test trials indicated that target compounds bearing a bulky N-methylmorpholinium pendant are safe for plants. The following in vivo bioassays showed that compound 3l could control the rice bacterial blight disease, thereby affording good control efficiencies of 55.95% (curative activity) and 53.09% (protective activity) at the dose of 200 μg/mL. Preliminary antibacterial mechanism studies suggested that target compounds had strong interactions with the cell membrane of bacteria via scanning electron microscopy imaging. Additionally, this kind of framework also displayed certain antifungal activity toward Fusarium oxysporum and Phytophthora cinnamomi. Given the above privileged characteristics, this kind of 1,3,4-oxadiazole-tailored N-methylmorpholinium derivatives could stimulate the design of safe quaternary ammonium bactericides for controlling plant bacterial diseases.

Environmentally Friendly Cross-Linked Antifouling Coatings Based on Dual Antimicrobial Action

The synthesis of environmentally friendly antimicrobial polymeric coatings, especially in the case of aquaculture, that inhibit the growth of bio-deposits is a very important issue that will contribute to the cost reduction of nets’ cleaning process as well as the protection of the submarine wealth from the biostatic substances used so far. In the present work, the antimicrobial polymers P(SSAmC₁₆-co-VBCHAMx) and the terpolymer P(SSAmC₁₆w-co-VBCHAMx-co-GMAy) were synthesized, bearing quaternary ammonium compounds, electrostatically bound and covalently attached at the same polymer chain. The combination of the two types is of particular importance, as it can provide effective antimicrobial polymeric materials with self-polishing capabilities as a result of the released nature of the antimicrobial, in combination with the permanent local action of the immobilized species. The cross-linking reaction of the terpolymer P(SSAmC₁₆w-co-VBCHAMx-co-GMAy) with the homopolymer polyacrylic acid (PAA) was tested at 120 °C in terms of the equivalent ratio between epoxy and carboxyl groups. The synthesized polymers were further used for the coating of aquaculture nets and tested in terms of antifouling efficiency in lab and scale-up conditions. Uncoated nets were also used in all applications for comparison reasons. The coated nets performed efficiently for 35 days in lab-scale and 66 days in scale-up conditions, showing a high antifouling activity in both fields compared to the uncoated nets.

Film Properties and Antimicrobial Efficacy of Quaternized PDMAEMA Brushes: Short vs Long Alkyl Chain Length

Quaternized poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes bearing quaternary ammonium groups of different alkyl chain lengths (ACLs) were prepared and assessed as biocidal coatings. For the synthesis of the antimicrobial brushes, first well-defined PDMAEMA chains were grown by surface-initiated atom transfer radical polymerization on glass and silicon substrates. Next, the tertiary amine groups of the polymer brushes were modified via a quaternization reaction, using alkyl halides, to obtain the cationic polymers. The polymer films were characterized by Fourier-transform infrared spectroscopy, ellipsometry, atomic force microscopy, and water contact angle measurements. The effect of the ACL of the quaternary ammonium groups on the physicochemical properties of the films as well as the contact killing efficiency of the surfaces against representative Gram-positive and Gram-negative bacteria was investigated. A hydrophilic to hydrophobic transition of the surfaces and a significant decrease of the degree of quaternization of the DMAEMA moieties was found upon increasing the ACL of the quaternization agent above six carbon atoms, allowing the wettability, the thickness, and the pH-response of the brushes to be tuned via a facile postpolymerization, quaternization reaction. At the same time, antimicrobial tests revealed that the hydrophilic polymer brushes exhibited enhanced bactericidal activity against Escherichia coli and Bacillus cereus, whereas the hydrophobic surfaces showed a significant deterioration of the in vitro bactericidal performance. Our results elucidate the antimicrobial action of quaternized polymer brushes, dictating the appropriate choice of the ACL of the quaternization agent for the development of coatings that effectively inhibit biofilm formation on surfaces.

Controlled synthesis of sugar-containing poly(ionic liquid)s

A facile synthetic route is reported toward sugar-containing pyridinium-based poly(ionic liquid)s (PILs) for efficient killing of bacteria.

Increasing the Antimicrobial Activity of Amphiphilic Cationic Copolymers by the Facile Synthesis of High Molecular Weight Stars by Supplemental Activator and Reducing Agent Atom Transfer Radical Polymerization

Infections caused by bacteria represent a great motif of concern in the health area. Therefore, there is a huge demand for more efficient antimicrobial agents. Antimicrobial polymers have attracted special attention as promising materials to prevent infectious diseases. In this study, a new polymeric system exhibiting antimicrobial activity against a range of Gram-positive and Gram-negative bacterial strains at micromolar concentrations (e.g., 0.8 μM) was developed. Controlled linear and star-shaped copolymers, comprising hydrophobic poly(butyl acrylate) (PBA) and cationic poly(3-acrylamidopropyl)trimethylammonium chloride) (PAMPTMA) segments, were obtained by supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) at 30 °C. The antibacterial activity of the polymers was studied by varying systematically the molecular weight (MW), hydrophilic/hydrophobic balance, and architecture. The MW was found to exert the greatest influence on the antimicrobial activity of the polymers, with minimum inhibitory concentration values decreasing with increasing MW. Live/dead membrane integrity assays and scanning electron microscopy analysis confirmed the bactericidal character of the synthesized PAMPTMA- (b)co-PBA polymers.

Anionic multiblock core cross-linked star copolymers via RAFT polymerization

The synthesis of (multi)block copolymers sand star (multiblock) copolymers of poly(2-acrylamido-2-methylpropane sulfonic acid) by RAFT polymerisation is reported.

Polymeric Quaternary Ammonium-Containing Coatings with Potential Dual Contact-Based and Release-Based Antimicrobial Activity

In the present work, reactive blending of copolymers with complementary functional groups was applied to control their antimicrobial activity and antifouling action in real conditions. For this purpose, two series of copolymers, poly(4-vinylbenzyl chloride-co-acrylic acid), P(VBC-co-AAx), and poly(sodium 4-styrenesulfonate-co-glycidyl methacrylate), P(SSNa-co-GMAx), were synthesized via free radical copolymerization and further modified by the incorporation of biocidal units either covalently (4-vinyl benzyl dimethylhexadecylammonium chloride, VBCHAM) or electrostatically bound (cetyltrimethylammonium 4-styrenesulfonate, SSAmC₁₆). The cross-linking reaction of the carboxylic group of acrylic acid (AA) with the epoxide group of glycidyl methacrylate (GMA) of these two series of reactive antimicrobial copolymers was explored in blends obtained through solution casting after curing at various temperatures. The combined results from the ATR-FTIR characterization of the membranes, solubility tests, turbidimetry, and TEM suggest that the reaction occurs already at 80 °C, leading mostly to graft samples, while at higher curing temperatures (120 or 150 °C) insoluble cross-linked samples are usually obtained. Controlled release experiments of selected membranes were performed in pure water and aqueous 1 M NaCl solutions for a period of two months. The released material was followed through gravimetry and TOC/TN measurements, while the evolution of the integrity and the morphology of the membranes were followed visually and through SEM, respectively. Antimicrobial tests also revealed that the cross-linked membranes presented strong antimicrobial activity against S. aureus and P. aeruginosa. Finally, a specific blend combination was applied on aquaculture nets and cured at 80 °C. The modified nets, emerged in the sea for 15 and 35 days, exhibited high antifouling action as compared to blank nets.