Isoselective Polymerization of rac-Lactide by Magnesium Initiators Bearing Achiral Di(2-pyridyl)methyl Substituted Aminophenolate Ligands

Reactions of achiral di(2-pyridyl)methyl substituted aminophenols L^1-6H (2-{N-R³-N-[di(2-pyridyl)methyl]aminomethyl}-4-R¹-6-R²-C₆H₂OH: R¹ = R² = ^tBu, R³ = ⁿBu (L¹H), R³ = ⁿhexyl (L²H), R³ = cyclohexyl (L³H); R¹ = R² = cumyl, R³ = ⁿBu (L⁴H), R³ = ⁿhexyl (L⁵H), R³ = cyclohexyl (L⁶H)) with {Mg[N(SiMe₃)₂]₂}₂ ([L^1-6H]:[Mg] = 1:1) afforded a series of magnesium silylamido complexes 1-6. In the solid state, the magnesium center of 3, 4, and 6 is penta-coordinated by the tetradentate aminophenloate ligand and one silylamido ligand to form a seriously distorted square-pyramidal geometry as confirmed by X-ray crystallography diffraction analysis. VT ¹H NMR and ROESY experiments further indicate that these magnesium complexes are also five-coordinated in solutions where the coordination of either of the two pyridyl pendants to the magnesium center is maintained. Complexes 1-6 are highly active toward the ring-opening polymerization of rac-lactide (rac-LA) at r.t. both in toluene and in tetrahydrofuran, capable of polymerizing 500 equiv of monomer to high conversions just within minutes. Among them, complex 3 exhibited the highest iso-stereoselectivity, affording moderately isotactic polylactide in toluene (P_m = 0.75). It is found that the isoselectivities and activities of these magnesium complexes toward the polymerization of rac-LA are closely associated with the substituents at the ortho-position of the phenoxide unit and on the skeleton nitrogen atom of the ligand. On the basis of NMR spectroscopic studies, the formation of isotactic PLAs with dominant stereoblock sequences was witnessed by using these magnesium complexes as initiators, and the inequivalent coordination of two pyridyl pendant arms in these magnesium complexes might be the source of exerting isoselective control.

Ring Opening Polymerization of Lactides and Lactones by Multimetallic Titanium Complexes Derived from the Acids Ph2C(X)CO2H (X = OH, NH2)

The reactions of the titanium alkoxide [Ti(OR)4] (R = Me, nPr, iPr, tBu) with the acids 2,2’-Ph2C(X)(CO2H), where X = OH and NH2, i.e., benzilic acid (2,2’-diphenylglycolic acid, L1H2), and 2,2’-diphenylglycine (L2H3), have been investigated. The variation of the reaction stoichiometry allows for the isolation of mono-, bi-, tri or tetra-metallic products, the structures of which have been determined by X-ray crystallography. The ability of the resulting complexes to act as catalysts for the ring opening polymerization (ROP) of ε-caprolactone (ε-CL) and r-lactide (r-LA) has been investigated. In the case of ε-CL, all catalysts except that derived from [Ti(OnPr)4] and L2H3, i.e., 7, exhibited an induction period of between 60 and 285 min, with 7 exhibiting the best performance (>99% conversion within 6 min). The PCL products are moderate- to high-molecular weight polymers. For r-LA, systems 1, 3, 4 and 7 afforded conversions of ca. 90% or more, with 4 exhibiting the fastest kinetics. The molecular weights for the PLA are somewhat higher than those of the PCL, with both cyclic and linear PLA products (end groups of OR/OH) identified. Comparative studies versus the [Ti(OR)4] starting materials were conducted, and although high conversions were achieved, the control was poor.

Ring-Opening Polymerization of L-Lactide Catalyzed by Potassium-Based Complexes: Mechanistic Studies

Two non-toxic potassium compounds, 1 and 2, with a commercial oximate ligand have been prepared and fully spectroscopically characterized. Their activity as catalysts for the ring-opening polymerization (ROP) process of LLA has been studied, showing that they are extremely active and able to polymerize the monomer in a few minutes. For derivative 2, the presence of a crown ether in the potassium coordination sphere affects the nuclearity of the compound and consequently its solubility, with both aspects having an influence in the polymerization process. Detailed studies of the polymerization mechanism have been performed, and an unusual anionic mechanism was observed in absence of a co-initiator. Indeed, the monomer deprotonation generates a lactide enolate, which initiates the polymerization propagation. On the contrary, when a 1:1 ratio of cat:BnOH is used, a mixture of mechanisms is observed, the anionic mechanism and the activated monomer one, while from a cat:BnOH ratio of 1:2 and over, only the activated monomer mechanism is observed.

Alkali and Alkaline Earth Metal Complexes as Versatile Catalysts for Ring-Opening Polymerization of Cyclic Esters

Biodegradable polyesters such as poly(ϵ-caprolactone) (PCL) and poly(lactic acid) (PLA) have been considered for use in several areas, such as drug delivery devices, sutures, tissue engineering, and GBR membranes, due to its bio-renewability, biodegradability, and biocompatibility. Several synthetic techniques for the preparation of polyesters have been reported in the literature, amongst which the ring-opening polymerization (ROP) of cyclic esters is the most efficient. A convenient approach to access iso-selective PLAs is polymerization of racemic lactide (rac-LA), which shows excellent stereoregularity without the need for costly chiral auxiliaries or ligands. In this personal account, we review a series of methods that have been practiced to the synthesis of biodegradable polyesters from various cyclic monomers using alkali and alkaline earth metal complexes as efficient catalysts.

Alkali-Metal Mediation: Diversity of Applications in Main-Group Organometallic Chemistry

Organolithium compounds have been at the forefront of synthetic chemistry for over a century, as they mediate the synthesis of myriads of compounds that are utilised worldwide in academic and industrial settings. For that reason, lithium has always been the most important alkali metal in organometallic chemistry. Today, that importance is being seriously challenged by sodium and potassium, as the alkali-metal mediation of organic reactions in general has started branching off in several new directions. Recent examples covering main-group homogeneous catalysis, stoichiometric organic synthesis, low-valent main-group metal chemistry, polymerization, and green chemistry are showcased in this Review. Since alkali-metal compounds are often not the end products of these applications, their roles are rarely given top billing. Thus, this Review has been written to alert the community to this rising unifying phenomenon of "alkali-metal mediation".

Synthesis, structures, and catalytic efficiency in ring opening polymerization of rac-lactide with tridentate vs. bidentate cobalt(ii), zinc(ii), and cadmium(ii) complexes containing N-substituted N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)amine ligands

A series of Co(ii), Zn(ii), and Cd(ii) complexes supported by 1-(3,5-dimethyl-1H-pyrazol-1-yl)-N-((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-N-(furan-2-ylmethyl)methanamine (L_A) and N,N-bis((3,5-dimethyl-1H-pyrazol-1-yl)methyl)-4-isopropylaniline (L_B) were synthesized. The direct chelation of CoCl₂·6H₂O, ZnCl₂, and CdBr₂·4H₂O by the ligands produced [L_nMX₂] (L_n = L_A or L_B; M = Zn or Co, with X = Cl; M = Cd, with X = Br) complexes in high yields. Structural studies revealed that [L_BCoCl₂] and [L_BZnCl₂] adopted distorted tetrahedral geometries, as L_B coordinated the metal centers in a bidentate fashion, while L_A coordinated the metal centers in a tridentate fashion through the nitrogen atoms of the pyrazole and amine moieties, so that [L_ACoCl₂] and [L_AZnCl₂] exhibited trigonal bipyramidal geometries and [L_ACdBr₂] a square pyramidal geometry. [L_BCdBr₂] has two Cd-containing structures per unit cell, whereby one Cd center adopted a distorted tetrahedral geometry and the other exhibited square bipyramidal geometry. The in situ-generated alkyl derivatives of the synthesized complexes were assessed in the ring-opening polymerization of rac-lactide. Heterotactic polylactides (PLAs) were furnished with all complexes. The [L_BZnCl₂]/MeLi system produced PLA with a superior heterotactic bias (P_r up to 0.94) at −25 °C. PLAs with wide-ranging polydispersity indices (1.16–2.23) and low molecular weights were produced in all cases, irrespective of the specific M(II) center and ancillary ligand utilized.

Co(ii), Zn(ii), and Cd(ii) complexes supported by bis-pyrazolyl ligands were applied to the ring-opening polymerization of rac-lactide to produce heterotactic polylactides (PLAs) with superior heterotactic bias i.e. P_r up to 0.94 at −25 °C.

Cyclic polylactide synthesis initiated by a lithium anthraquinoid: understanding the selectivity through DFT and diffusion NMR

We present herein the application of a lithium anthraquinoid in the catalytic synthesis of cyclic PLA, showing that the aggregation plays a critical role in cyclic vs. linear selectivity.

Isoselective Ring-Opening Polymerization of rac-Lactide Catalyzed by Sodium/potassium Tetradentate Aminobisphenolate Ion-paired Complexes

Two sodium/potassium tetradentate aminobisphenolate ion-paired complexes were synthesized and structurally characterized. These ion-paired complexes are efficient catalysts for the ring-opening polymerization of rac-lactide (rac-LA) in the presence of 5 equivalents BnOH as an initiator and the side reaction of epimerization can be suppressed well at low temperatures. The polymerizations are controllable, affording polylactides with desirable molecular weights and narrow molecular weight distributions; the highest molecular weight can reach 50.1 kg mol^-1 in this system, and a best isoselectivity of P_m =0.82 was achieved. Such polymerizations have rarely been reported for isoselective sodium/potassium complexes without crown ether as an auxiliary ligand. The solid structures suggest that BnOH can be activated by an interaction with the anion of sodium/potassium complex via a hydrogen bond and that the monomer is activated by coordination to sodium/potassium ion.

Tetradentate iminophenolate copper complexes in rac-lactide polymerization

Copper(II) nitrate complexes of 2-(((2-((2-aminoethyl)amino)ethyl)imino)methyl)phenol, 2-(((2-((2-aminoethyl)amino)ethyl)imino)methyl)-4,6-dichlorophenol, 2-(((2-(piperazin-1-yl)ethyl)imino)methyl)phenol and (2,4-di-tert-butyl-6-(((2-(piperazin-1-yl)ethyl)imino)methyl)phenol, as well as a copper(II) acetate complex of 2-(((2-(piperidin-1-yl)ethyl)imino)methyl)phenol, have been prepared and characterized by X-ray diffraction studies. In combination with benzyl alcohol, all complexes are active in rac-lactide polymerization at 140 °C in molten monomer to provide moderately heterotactic polylactic acid. Most complexes showed complicated reaction kinetics, indicative of two interconverting active species. Molecular weight control was poor and a strong tendency toward intramolecular transesterification led to oligomeric products. There was no indication that the basic site of the ligand is participating in the polymerization reaction by deprotonation of the alcohol nucleophile.

Mononuclear Salen-Sodium Ion Pairs as Catalysts for Isoselective Polymerization of rac-Lactide

A series of mononuclear salen-sodium anions, as the first examples, were synthesized with tetra-alkyl ammonium as a counterpart cation. These complexes are efficient catalysts for the isoselective ring-opening polymerization of rac-lactide; the molecular weights of polymers are under control and molecular weight distributions are narrow when five equivalents of BnOH is used as an initiator. The best isoselectivity value of P_m = 0.82 was achieved at -70 °C. The experimental results together with a density functional theory calculation show that a ligand-assisted activated monomer mechanism is more reasonable than an activated monomer mechanism for this system.

Highly isoselective ring-opening polymerization of rac-O-carboxyanhydrides using a zinc alkoxide initiator

A highly isoselective ROP system using just a zinc alkoxide as an initiator for the isoselective ROP of OCAs with the best P_m value of 0.97 at −70 °C.

Recent progress in the application of group 1, 2 & 13 metal complexes as catalysts for the ring opening polymerization of cyclic esters

This review focuses on recent developments concerned with the use of well-defined main group complexes as (pre-)catalysts for the ROP of cyclic esters to give aliphatic polyesters; factors influencing catalytic activity, selectivity and polymer properties are all discussed.

Aggregated initiators: defining their role in the ROP of rac-lactide

Reported examples of aggregated initiators for the ring-opening polymerisation (ROP) of lactide often lack detailed investigations as to the nature of the active species, making it difficult to reconcile ligand design with performance. Here, we offer additional stability to the polynuclear titanium complexes, TiL(OiPr) (L = 9-14), through a bridging carboxylate anchored to the supporting amine bis(phenolate) ligands. An in-depth study of solution-state behaviour determined the process of assembly was driven by interactions between the carboxylate and a vacant site on a neighbouring titanium centre. Furthermore, we establish that mononuclear units form dynamic mixtures of polynuclear aggregates, with a clear relationship between nuclearity of the aggregates and the steric bulk on the ligand. Smaller aggregates displayed increased activity towards the ROP of rac-lactide. Furthermore, addition of a chiral centre, on the ligand framework, was investigated as a route to influence the selectivity of the polymerisation via easily-accessible initiators.

Magnesium and zinc complexes bearing NNO-tridentate ketiminate ligands: synthesis, structures and catalysis in the ring-opening polymerization of lactides

Magnesium and zinc complexes bearing pyrazoline-derived ketiminate ligands, [(L^1–3)₂M₂(μ-OBn)₂] and [M(L)₂] proceed through the “coordination–insertion” mechanism in the ROP of lactides.

Bipyrrolidine salan alkoxide complexes of lanthanides: synthesis, characterisation, activity in the polymerisation of lactide and mechanistic investigation by DOSY NMR

Dimeric lanthanide alkoxide and hydroxide complexes with salan ligands have been prepared with Nd, Sm and Yb. Monitoring their activity in the polymerisation of lactide by ¹H DOSY NMR reveals a dinuclear catalytic active species.

Zirconium and hafnium complexes bearing pyrrolidine derived salalen-type {ONNO} ligands and their application for ring-opening polymerization of lactides

The reactions of pyrrolidine derived salalen-type {ONNO} ligands (S)-L^1-3-H₂ with 1 equiv. M(OⁱPr)₄(HOⁱPr) (M = Zr or Hf) in diethyl ether yielded complexes [L^1-3M(OⁱPr)₂] (L = L¹, M = Zr (1); L = L², M = Zr (2), Hf (3); L = L³, M = Zr (4), Hf (5)). All of these complexes were well characterized by NMR spectroscopy, elemental analyses and single-crystal X-ray analysis in the case of complexes 1 and 3-5. X-ray structural determination revealed that these complexes were analogous mononuclear species and had a similar structure in which the metal centers were six-coordinated to two oxygen atoms and two nitrogen atoms of one ligand and two oxygen atoms of two isopropoxy groups. All of these complexes efficiently initialized the ring-opening polymerization of lactides to afford polymers with controlled molecular weight and narrow polydispersity. Furthermore, the ring-opening polymerization of rac-lactide catalyzed by complexes 1-5 afforded isotactic-enriched polymers in solution (P_m = 0.74-0.80) and under melt conditions (P_m = 0.63-0.72).

Potassium complexes supported by monoanionic tetradentate amino-phenolate ligands: synthesis, structure and catalysis in the ring-opening polymerization of rac-lactide

A series of potassium complexes bearing monoanionic tetradentate amino-phenolate ligands, [LK]₂ (L = {(2-R¹)C₆H₄CH₂N[(CH₂)₂R²]CH₂(4-R⁴-6-R³)C₆H₂O-}, R¹ = NMe₂, R² = NEt₂, R³ = CPh₃, R⁴ = Me (1); R¹ = R² = NEt₂, R³ = CPh₃, R⁴ = Me (2); R¹ = NMe₂, R² = NEt₂, R³ = R⁴ = cumyl (4); R¹ = R² = OMe, R³ = ^tBu, R⁴ = Me (6); L = (2-NMe₂)C₆H₄CH₂N[[CH₂-(S)-1-butylpyrrolidinyl]CH₂(4-Me-6-CPh₃)C₆H₂O-] (3)), have been synthesized via reactions of KN(SiMe₃)₂ and 1 equiv. of the corresponding aminophenols. The solid-state structures of typical complexes 4 and 6 are determined via X-ray diffraction studies, which reveal the dinuclear nature of these complexes. By contrast, DOSY measurements of 1, 4 and 6 suggest that these complexes are monomeric in solution. It is noteworthy that the coordination chemistry of these potassium complexes is versatile, which is closely related to the nature of the ortho-substituent of the phenolate ring, as indicated by the results of the corresponding spectroscopic studies. In the presence of ⁱPrOH, 1-4 and 6 could initiate the polymerization of 500 equiv. of rac-lactide to achieve high monomer conversions within several minutes but afford atactic PLAs with slightly isotactic-enriched microstructures (P_m = 0.58-0.60). Experimental results also demonstrated that a bulky trityl substituent at the ortho-position of the phenolate ring of the ligand framework is beneficial for the enhancement of the activities of these potassium complexes.

Ring-opening polymerization of rac-lactide catalyzed by crown ether complexes of sodium and potassium iminophenoxides

Crown ether complexes of sodium and potassium iminophenoxides were demonstrated to catalyze the stereoselective polymerization of rac-lactide.

Crown ether complexes of potassium quinolin-8-olates: synthesis, characterization and catalysis toward the ring-opening polymerization of rac-lactide

Crown ether complexes of potassium quinolin-8-olates were synthesized and demonstrated to catalyze the stereoselective polymerization of rac-lactide.