Catalytic Performance in Nitroarene Reduction of Nanocatalyst Based on Noble Metal Nanoparticles Supported on Polymer/s-Layer Protein Hybrids

We present a novel bionanocatalyst fabricated by the adsorption-reduction of metal ions on a polyurethane/S-layer protein biotemplate. The bioinspired support was obtained by the adsorption of S-layer proteins (isolated from Lentilactobacillus kefiri) on polyurethane particles. Silver and platinum nanoparticles were well-loaded on the surface of the support after the combination with metallic salts and reduction with H2 at room temperature. Transmission electron microscopy analysis revealed the strawberry-like morphology of the bionanocatalysts with a particle size, dn, of 2.39 nm for platinum and 9.60 nm for silver. Both systems catalyzed the hydrogenation of p-nitrophenol to p-aminophenol with high efficiency in water at mild conditions in the presence of NaBH4. Three different amounts of bionanocatalyst were tested, and in all cases, conversions between 97 and 99% were observed. The catalysts displayed excellent recyclability over ten cycles, and no extensive damage in their nanostructure was noted after them. The bionanocatalysts were stable during their production, storage, and use, thanks to the fact that the biosupport provides an effective driving force in the formation and stabilization of the metallic nanoparticles. The successful bioinspired production strategy and the good catalytic ability of the systems are encouraging in the search for nontoxic, simple, clean, and eco-friendly procedures for the synthesis and exploitation of nanostructures.

Synergistic effect of silver nanoparticle-embedded calcite-rich biochar derived from Tamarindus indica bark on 4-nitrophenol reduction

Calcite-biochar composites are attractive materials with outstanding adsorption capabilities for removing various recalcitrant contaminants in wastewater treatment, however, the complexity of their synthesis limits their practical applications. In this work, we have prepared calcite-rich biochar (Ca-BC) from a single precursor (Tamarindus indica bark), which simplifies the synthetic route for preparing calcite-biochar composite. The as-synthesized composite is utilized to make a heterogeneous catalytic system containing the supported silver nanoparticles (Ag@Ca-BC) formed by the reduction of Ag+ ions on the surface of the composite. The formation of Ag@Ca-BC is confirmed by various characterization techniques such as PXRD, FT-IR, UV-Vis, cyclic voltammetry, impedance measurement, SEM, and TEM analyses. Especially, the TEM analysis confirms the presence of Ag nanoparticles with size ranging between 20 and 50 nm on the surface of Ca-BC composite. The nano-catalyst Ag@Ca-BC efficiently promotes the conversion of 4-nitrophenol to 4-aminophenol using NaBH4 as the reductant in water within 24 minutes at room temperature, suggesting that Ag@Ca-BC can be an efficient catalyst to remove nitroaromatics from the industrial effluents. The straightforward synthesis of Ca-BC from a single precursor along with its utility as a catalytic support presents a compelling proposition for application in the field of materials synthesis, catalysis, and green chemistry.

Template free synthesis of CuO nanocomposite for catalytic hydrogenation of CO2

Increasing CO2 emissions from industry has disastrous consequences for the environment. Effective utilization of CO2 as a carbon source can address the environmental challenges, and we can address the energy crisis caused by fossil fuel consumption. Electrochemical conversion of CO2 is a promising method recently gaining widespread popularity. Its high productivity, however, remains a major challenge. This work involved a facile novel preparation of a suitable CuO nanocomposite to reduce CO2 into useful fuels effectively. Hydrothermal synthesis was used to synthesize the nanocomposite. The synthesized NC's structure, morphology, and elemental analysis were evaluated using XRD, Raman spectroscopy, SEM, and TEM. ICP-OES analysis was performed to quantify Cu concentration in the CuO composite, confirming 98.6% of Cu of the prepared matrix. The cyclic voltammetry method has been used to study the electrochemical activity of NC for CO2 reduction. Additionally, the NMR & GC-MS analyses were performed to identify the product. Regarding CO2 reduction, the NC performed greatly better than the ordinary CuO. In addition, the NC exhibits high structural stability and durability, demonstrating its potential to reduce CO2 into fuels.

Continuous Synthesis of Uniformly Dispersed Mesoporous SBA-15 Supported Silver Nanoparticles in a Coiled Flow Inverter Reactor

Mesoporous silica supported nanocatalysts have shown great potential in industrial processes due to their unique properties, such as high surface area, large pore volume, good chemomechanical stability and so on. Controllable and tunable synthesis of supported nanocatalysts is a crucial problem. Continuous synthesis of supported nanoparticles has been reported to get uniformly dispersed nanomaterials. Here, a method for continuous synthesis of uniformly dispersed mesoporous SBA-15 supported silver nanoparticles in a coiled flow inverter (CFI) microreactor is described. Compared to Ag/SBA-15 synthesized in the conventional batch reactor and Ag synthesized in continuous flow, mesoporous silica nanocatalysts synthesized in continuous flow are found to have smaller average size (7-11 nm) and narrower size distribution. The addition of capping agents can effectively change the characteristic of catalysts. Moreover, two kinds of support with different surface area and pore size have been added into the continuous synthesis. This method can provide further understandings for the synthesis of uniformly dispersed supported nanocatalysts in continuous flow, especially for mesoporous nanomaterials, which provides the possibilities of large-scale yield process of supported nanocatalysts in industry.

Dual Stimuli-Responsive Copper Nanoparticles Decorated SBA-15: A Highly Efficient Catalyst for the Oxidation of Alcohols in Water

In the present work, a temperature and pH-responsive hybrid catalytic system using copolymer-capped mesoporous silica particles with metal nanoparticles is proposed. The poly(2-(dimethylamino)ethyl methacrylate)(DMAEMA)-co-N-tert-butyl acrylamide) (TBA)) shell on mesoporous silica SBA-15 was obtained through free radical polymerization. Then, copper nanoparticles (CuNPs) decorated SBA-15/copolymer hybrid materials were synthesized using the NaBH₄ reduction method. SBA-15 was functionalized with trimethoxylsilylpropyl methacrylate (TMSPM) and named TSBA. It was found that the CuNPs were uniformly dispersed in the mesoporous channels of SBA-15, and the hybrid catalyst exhibited excellent catalytic performance for the selective oxidation of different substituted benzyl alcohols in water using H₂O₂ as an oxidant at room temperature. The dual (temperature and pH-) responsive behaviors of the CuNPs/p(DMAEMA-co-TBA)/TSBA catalyst were investigated using the dynamic light scattering technique. The conversion of catalytic products and selectivity were calculated using gas chromatographic techniques, whereas the molecular structure of the products was identified using ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy. The catalyst showed excellent catalytic activity toward the oxidation of alcohol to aldehyde in an aqueous medium below the lower critical solution temperature (LCST) and pKa values (7–7.5) of the copolymer. The main advantages of the hybrid catalyst, as compared to the existing catalysts, are outstanding alcohol conversion (up to 99%) for a short reaction time (1 h), small amount of the catalyst (5 mg), and good recyclability equal to at least five times.

Supported Palladium Nanocatalysts: Recent Findings in Hydrogenation Reactions

Catalysis has witnessed a dramatic increase on the use of metallic nanoparticles in the last decade, opening endless opportunities in a wide range of research areas. As one of the most investigated catalysts in organic synthesis, palladium finds numerous applications being of significant relevance in industrial hydrogenation reactions. The immobilization of Pd nanoparticles in porous solid supports offers great advantages in heterogeneous catalysis, allowing control of the major factors that influence activity and selectivity. The present review deals with recent developments in the preparation and applications of immobilized Pd nanoparticles on solid supports as catalysts for hydrogenation reactions, aiming to give an insight on the key factors that contribute to enhanced activity and selectivity. The application of mesoporous silicas, carbonaceous materials, zeolites, and metal organic frameworks (MOFs) as supports for palladium nanoparticles is addressed.

Rice husk-SiO2 supported bimetallic Fe-Ni nanoparticles: as a new, powerful magnetic nanocomposite for the aqueous reduction of nitro compounds to amines

This paper reports a novel green procedure for immobilization of bimetallic Fe/Ni on amorphous silica nanoparticles extracted from rice husk (RH-SiO₂). The heterogeneous nanocomposite (Fe/Ni@RH-SiO₂) was identified using SEM, EDX, TEM, BET, H₂-TPR, TGA, XRD, VSM, ICP-OES, and FT-IR analyses. The Fe/Ni@RH-SiO₂ nanocomposite was applied as a powerful catalyst for the reduction of structurally diverse nitro compounds with sodium borohydride (NaBH₄) in green conditions. This procedure suggests some benefits such as green chemistry-based properties, short reaction times, non-explosive materials, easy to handle, fast separation and simple work-up method. The catalyst was separated by an external magnet from the reaction mixture and was reused for 9 successive cycles with no detectable changes of its catalytic efficiency.

This paper reports a novel green procedure for immobilization of bimetallic Fe/Ni on amorphous silica nanoparticles extracted from rice husk (RH-SiO₂).

Ultrafine bimetallic Ag-doped Ni nanoparticles embedded in cage-type mesoporous silica SBA-16 as superior catalysts for conversion of toxic nitroaromatic compounds

Highly active Ag-doped Ni nanoparticles are successfully fabricated within carboxylic acid (-COOH) functionalized mesoporous silica SBA-16 by a facile wet incipient technique for catalytic conversion of toxic nitroaromatics. The -COOH groups on SBA-16 play a crucial role by enhancing the electrostatic interactions with Ag(I)/Ni(II) cations, that control the crystal growth during the thermal reduction. Systematic characterizations of SBA-16C and Ag_x%Ni@SBA-16C are performed by different techniques including solid state ¹³C and ²⁹Si nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), N₂ sorption, X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM) and superconducting quantum interference device (SQUID). The highly dispersed ultrafine Ag-doped Ni NPs (∼3 nm) are well-confined within SBA-16C and exhibit magnetic properties that are extremely beneficial for recycling. The bimetallic Ag_2.4%Ni@SBA-16C shows exceptionally high catalytic activity during catalytic conversion of toxic nitroaromatics to environmentally friendly amino-aromatics. The enhanced catalytic activity could be ascribed to the combined effects of unique electronic properties, synergistic effects of Ag-doped Ni, ultra-small size, metal loading, and favorable textural properties. These magnetically separable nanocatalysts show excellent durability.

Size-Controlled Growth of Silver Nanoparticles onto Functionalized Ordered Mesoporous Polymers for Efficient CO2 Upgrading

Highly dispersed metallic silver nanoparticles (AgNPs) are promising heterogeneous catalysts for carboxylative coupling of terminal alkynes with CO₂ under mild conditions. Yet, their size-controlled synthesis is very challenging because of the high surface energy. Here, we prepared a series of amino-functionalized ordered mesoporous polymers as hosts for anchoring AgNPs. Control experiments and computations showed that electron-rich amines were confined in mesochannels with varying electron density and steric hindrance, creating "localized active zones (LAZ)" to control the growth of AgNPs. The particle size of AgNPs grows along with the increased volume of LAZ around nitrogen species. We also revealed that the catalytic activity of Ag-based catalysts is size-dependent and increases with decreasing particle size. Building on these findings, we report a facile one-pot synthesis strategy for preparing an amine-incorporated ordered mesoporous polymer (NOMP) with a high specific surface area, small LAZ volume, and uniform amine sites with controllable loading. These features result in the formation of ultrasmall and monodispersed Ag nanoparticles. Remarkably, Ag@NOMP gave a quantitative target yield under the conditions of 1 atm CO₂ pressure and 50 °C, showing superior catalytic activity in CO₂ carboxylation compared to other mesoporous analogues.

A carboxylic acid functionalized SBA-15 supported Pd nanocatalyst: an efficient catalyst for hydrogenation of nitrobenzene to aniline in water

The catalytic performance of a PdNPs/SBA-COOH has been investigated for the first time in the selective hydrogenation of nitrobenzene with hydrous hydrazine at RT in water medium.

Ultrafine NiMoOx nanoparticles confined in mesoporous carbon for the reduction of nitroarenes: effect of the composition and accessibility of the active sites

The design of ultrafine NiMoO_x nanoparticles (NPs) confined in hierarchically porous carbon remains a great challenge due to its high calcination temperature. In addition, the composition of active sites of NiMoO_x NPs for the hydrogenation reaction is still ambiguous. Herein, we report a general approach for the synthesis of ultrafine NiMoO_x NPs confined in mesoporous carbon with different morphologies and compositions using the replication method with SBA-15 as a hard template. The pore structure of mesoporous carbon and the Ni/Mo composition valence-state were discovered to be the main factors in the reduction of nitroarenes. The NiMoO_x/mesoporous carbon-platelet (NiMoO_x/MC-PL) with short mesochannels (∼350 nm) and high surface area (∼995 m² g⁻¹) possessed excellent catalytic activity towards the reduction of 4-nitrophenol, whereas NiMoO_x/mesoporous carbon-hexagonal-prism (NiMoO_x/MC-HP), NiMoO_x/mesoporous carbon-long-rod (NiMoO_x/MC-LR), and NiMoO_x/mesoporous carbon-spherical (NiMoO_x/MC-SP) with long mesochannels and relatively less surface area exhibited poor catalytic performance. The bifunctional mechanism or electronic synergistic effects of Ni and Mo species enhanced their catalytic performance. A good balance between MoO_x and metallic Ni (NiMoO_x/MC-PL-450) was found to be suitable for the reduction of 4-NP.

Ultrafine NiMoO_x NPs were confined in the framework of mesoporous carbon by using the replication method for the reduction of nitroarenes.

Current advances in the utility of functionalized SBA mesoporous silica for developing encapsulated nanocatalysts: state of the art

The cavities of SBA mesoporous silica materials can be used as nanoreactors for embedding catalytic species such as nanoparticles, complexes and heteropolyacids etc.

Amorphous NiB/carbon nanohybrids: synthesis and catalytic enhancement induced by electron transfer

Amorphous NiB/C shows synergistic catalysis for 4-nitrophenol reduction, induced by the electron transfer from NiB alloy to carbon support.