Adhesion and non-linear rheology of adhesives with supramolecular crosslinking points

Pressure-Sensitive Supramolecular Adhesives Based on Lipoic Acid and Biofriendly Dynamic Cyclodextrin and Polyrotaxane Cross-Linkers

Slide-ring materials are polymer networks with mobile cross-links that exhibit impressive stress dissipation and fracture resistance owing to the pulley effect. On account of their remarkable ability to dissipate the energy of deformation, these materials have found their way into advanced materials such as abrasion-resistant coatings and elastic battery electrode binders. In this work, we explore the role of mobile cross-links on the properties of a biofriendly pressure-sensitive adhesive made using composites of cyclodextrin-based macromolecules and poly(lipoic acid). We modify cyclodextrin-based hosts and polyrotaxanes with pendant groups of lipoic acid (a commonly ingested antioxidant) to incorporate them as cross-links in poly(lipoic acid) networks obtained by simple heating in open air. By systematically varying the adhesive formulations while probing their mechanical and adhesive properties, we uncover trends in structure-property relationships that enable one to tune network properties and access biofriendly, high-tack adhesives.

Rheology and Tack Properties of Biodegradable Isodimorphic Poly(Butylene Succinate)-Ran-Poly(e-Caprolactone) Random Copolyesters and Their Potential Use as Adhesives

The sole effect of the microstructure of biodegradable isodimorphic poly(butylene succinate)-ran-poly(ε-caprolactone) random copolyesters on their rheological properties is investigated. To avoid the effect of molecular weight and temperature, two rheological procedures are considered: the activation energy of flow, E_a, and the phase angle versus complex modulus plots. An unexpected variation of both parameters with copolyester composition is observed, with respective maximum and minimum values for the 50/50 composition. This might be due to the peculiar chain configurations of the copolymers that vary as a function of comonomer distribution within the chains. The same chain configuration variations are responsible for the isodimorphic character of the copolymers in the crystalline state. Tack tests, performed to study the viability of the copolyesters as environmentally friendly hot melt adhesives (HMA), reveal a correlation with rheological results. Tackiness parameters, particularly the energy of adhesion obtained from stress-strain curves during debonding experiments, are enhanced as melt elasticity increases. Based on the carried-out analysis, the link microstructure-rheology-tackiness is established, allowing selecting the best performing HMA sample considering the polymer chemistry of the system.

Molecular Characterization of Polymer Networks

Polymer networks are complex systems consisting of molecular components. Whereas the properties of the individual components are typically well understood by most chemists, translating that chemical insight into polymer networks themselves is limited by the statistical and poorly defined nature of network structures. As a result, it is challenging, if not currently impossible, to extrapolate from the molecular behavior of components to the full range of performance and properties of the entire polymer network. Polymer networks therefore present an unrealized, important, and interdisciplinary opportunity to exert molecular-level, chemical control on material macroscopic properties. A barrier to sophisticated molecular approaches to polymer networks is that the techniques for characterizing the molecular structure of networks are often unfamiliar to many scientists. Here, we present a critical overview of the current characterization techniques available to understand the relation between the molecular properties and the resulting performance and behavior of polymer networks, in the absence of added fillers. We highlight the methods available to characterize the chemistry and molecular-level properties of individual polymer strands and junctions, the gelation process by which strands form networks, the structure of the resulting network, and the dynamics and mechanics of the final material. The purpose is not to serve as a detailed manual for conducting these measurements but rather to unify the underlying principles, point out remaining challenges, and provide a concise overview by which chemists can plan characterization strategies that suit their research objectives. Because polymer networks cannot often be sufficiently characterized with a single method, strategic combinations of multiple techniques are typically required for their molecular characterization.

Adhesive thermosensitive gels for local delivery of viral vectors

Local delivery of viral vectors can enhance the efficacy of therapies by selectively affecting necessary tissues and reducing the required vector dose. Pluronic F127 is a thermosensitive polymer that undergoes a solution-gelation (sol-gel) transition as temperature increases and can deliver vectors without damaging them. While pluronics can be spread over large areas, such as the surface of an organ, before gelation, they lack sufficient adhesivity to remain attached to some tissues, such as the surface of the heart or mucosal surfaces. Here, we utilized blends of pluronic F127 and polycarbophil (PCB), a mucoadhesive agent, to provide the necessary adhesivity for local delivery of viral vectors to the cardiac muscle. The effects of PCB concentration on adhesive properties, sol-gel temperature transition and cytocompatibility were evaluated. Rheological studies showed that PCB decreased the sol-gel transition temperature at concentrations >1% and increased the adhesive properties of the gel. Furthermore, these gels were able to deliver viral vectors and transduce cells in vitro and in vivo in a neonatal mouse apical resection model. These gels could be a useful platform for delivering viral vectors over the surface of organs where increased adhesivity is required.

Effect of the Strength of Stickers on Rheology and Adhesion of Supramolecular Center-Functionalized Polyisobutenes

In order to systematically investigate the effect of the strength of the supramolecular interactions on the debonding properties of associative polymers, a series of model systems have been characterized by probe-tack tests. These model materials, composed of linear and low dispersity poly(isobutylene) chains ( M_n ≈ 3 kg/mol) center-functionalized by a single bis-urea sticker, are able to self-assemble by four hydrogen bonds. Three types of stickers are used in the present study: a bis-urea with a methylene diphenyl (MDI) spacer, a bis-urea with a tolyl (TOL) spacer, and a bis-urea with a xylyl (XYL) spacer. In order to investigate the influence of stickers in depth, both the nanostructure of the materials and the linear rheology were investigated by small-angle X-ray scattering (SAXS) and oscillatory shear, respectively. For two types of stickers (TOL and XYL), the association of polymers via hydrogen bonds induces the formation of bundles of rodlike aggregates at room temperature and the behavior of a soft elastic material was observed. For bis-urea MDI, no structure is detected by SAXS and a Newtonian behavior is observed at room temperature. In probe-tack experiments, all these materials show a cohesive mode of failure, a signature of flowing materials as previously observed for tri-urea center-functionalized poly(butylacrylate) (PnBA3U). However, XYL center-functionalized polyisobutene shows much higher debonding energies than PnBA3U, revealing the importance of the strength of noncovalent bonds in the scission/recombination dynamics. On the basis of the analysis of the debonding images, this effect is discussed via the mechanical behavior at large deformation.

Effects of multifunctional cross-linkers on rheology and adhesion of soft nanostructured materials

We investigate the nanostructure, the rheology and the adhesion of soft supramolecular materials elaborated by blending monofunctional and multifunctional poly(isobutene) (PIB) chains. Monofunctional PIB chains (PIBUT) are linear and unentangled polymer chains (M_n ≈ 3 kg mol^-1) functionalized in the middle by a bis-urea interacting moiety, able to self-associate by four hydrogen bonds. Covalent coupling of monofunctional PIB allows us to synthesize longer chains bearing two or three interacting moieties. These chains are then added to monofunctional PIB to prepare blends containing up to 10% of multifunctional PIB (M-PIBUT). The influence of M-PIBUT on the supramolecular nanostructure, which results from the self-assembly of stickers, is studied by Atomic Force Microscopy and Small Angle X-ray Scattering at room temperature. Multifunctional and monofunctional chains are shown to interact with each other to form bundles of rod-like aggregates. The consequences of these interactions on the rheology of the blends were studied by shear tests in the linear and non linear regimes, below and above the order-disorder transition temperature. A pronounced strengthening effect of M-PIBUT is observed at room temperature: the supramolecular blends become more elastic and are more resistant to creep with increasing concentration of M-PIBUT. The effects of M-PIBUT on the nanostructure and the rheology suggest that M-PIBUT, which can link with more than one supramolecular aggregate, plays the role of a physical cross-linker. The impact of these supramolecular cross-linkers on the adhesion of the blends is studied by probe-tack tests and discussed by analyzing the in situ deformation through the debonding images.

Combined Effect of Chain Extension and Supramolecular Interactions on Rheological and Adhesive Properties of Acrylic Pressure-Sensitive Adhesives

A new approach for the elaboration of low molecular weight pressure-sensitive adhesives based on supramolecular chemistry is explored. The synthesis of model systems coupled with probe-tack tests and rheological experiments highlights the influence of the transient network formed by supramolecular bonds on the adhesion energy. The first step of our approach consists of synthesizing poly(butyl acrylate-co-glycidyl methacrylate) copolymers from a difunctional initiator able to self-associate by four hydrogen bonds between urea groups. Linear copolymers with a low dispersity (M_n = 10 kg/mol, Ip < 1.4) have been synthesized via atom transfer radical polymerization. Films of the copolymers were then partially cross-linked through reaction of the epoxy functions with a diamine. The systematic variation of the average ratio of glycidyl methacrylate and diamine per copolymer shed light on the respective role played by the supramolecular interactions (between bis-urea groups and with the side chains) and by the chain extension and branching induced by the diamine/epoxy reaction. In this strategy, the adhesive performance can be optimized by modifying the strength of "stickers" (via the structure of the supramolecular initiator, for instance) and the polymer network (e.g., via the length and level of branching of the copolymer chains) in order to approach commercial PSA-like properties (high debonding energy and clean removal).