Progress in the Synthesis and Application of Tellurium Nanomaterials

In recent decades, low-dimensional nanodevices have shown great potential to extend Moore's Law. The n-type semiconductors already have several candidate materials for semiconductors with high carrier transport and device performance, but the development of their p-type counterparts remains a challenge. As a p-type narrow bandgap semiconductor, tellurium nanostructure has outstanding electrical properties, controllable bandgap, and good environmental stability. With the addition of methods for synthesizing various emerging tellurium nanostructures with controllable size, shape, and structure, tellurium nanomaterials show great application prospects in next-generation electronics and optoelectronic devices. For tellurium-based nanomaterials, scanning electron microscopy and transmission electron microscopy are the main characterization methods for their morphology. In this paper, the controllable synthesis methods of different tellurium nanostructures are reviewed, and the latest progress in the application of tellurium nanostructures is summarized. The applications of tellurium nanostructures in electronics and optoelectronics, including field-effect transistors, photodetectors, and sensors, are highlighted. Finally, the future challenges, opportunities, and development directions of tellurium nanomaterials are prospected.

Tellurium-nanorod-based saturable absorber for an ultrafast passive mode-locked erbium-doped fiber laser

In this paper, we propose and demonstrate ultrafast Te nanorods as a saturable absorber (SA) for producing mode locking from an erbium-doped fiber laser for the first time, to the best of our knowledge. The Te nanorods were fabricated by a simple green chemical method with energy conservation and without a purification process. The morphology and structure measurements confirm uniform Te nanorods with a constant aspect ratio. The synthesized SA has a saturation intensity and modulation depth of $25.44\, {\rm MW/cm}^{2} $25.44MW/cm² and 4%, respectively. By integrating the proposed SA into an erbium-doped all fiber-based ring cavity, the mode-locked fiber laser was readily generated. The conventional soliton pulses of ${3.56}\;{\rm ps}$3.56ps pulse width were obtained at 1566.7 nm central wavelength and a pulse repetition rate of 1.87 MHz. The results show that the moderate saturable-absorption characteristics of Te nanorods have superior performance in the ultrafast optics field, which is eligible in many applications, such as optical communications.

Morphology-tunable tellurium nanomaterials produced by the tellurite-reducing bacterium Lysinibacillus sp. ZYM-1

Although tellurite is highly toxic to organisms, elemental tellurium nanomaterials (TeNMs) have many uses. The microbe-mediated reduction of tellurite to Te(0) has been shown to be a green and cost-effective approach for turning waste into wealth. However, it is difficult to tune the morphology of biogenic nanomaterials. In this study, a series of experiments was conducted to investigate the factors influencing tellurite reduction by the tellurite-reducing bacterium Lysinibacillus sp. ZYM-1, including pH, tellurite concentration, temperature, and heavy metal ions. The optimal removal efficiency of tellurite was respectively achieved at pH 8, 0.5 mM tellurite, and 40 °C. All of the tested metal ions retarded the reduction of tellurite, especially Cd²⁺ and Co²⁺, which completely inhibited its reduction. Further characterization of the biogenic TeNMs indicated that their morphology could be tuned by the tellurite concentration, pH, temperature, and organic solvents used. Regular Te nanosheets were produced using 5 mM tellurite. The TeNMs were primarily synthesized in the cell membrane. Hexagonal Te nanoplates, nanorods, nanoflowers, and nanobranches were synthesized when combining membrane fractions with tellurite and NADH. The diverse morphologies are assumed to be induced by the synergy between the reduction kinetics and the protein structure. Therefore, this study confirmed that the bacterium can tune the morphology of TeNMs, broadening the potential application of biogenic TeNMs.