Selective Supramolecular Recognition of Nitroaromatics by a Fluorescent Metal-Organic Cage Based on a Pyridine-Decorated Dibenzodiaza-Crown Macrocyclic Co(II) Complex

Two isomorphous fluorescent (FL) lantern-shaped metal-organic cages 1 and 2 were prepared by coordination-directed self-assembly of Co(II) centers with a new aza-crown macrocyclic ligand bearing pyridine pendant arms (L_py). The cage structures were determined using single-crystal X-ray diffraction analysis, thermogravimetric, elemental microanalysis, FT-IR spectroscopy, and powder X-ray diffraction. The crystal structures of 1 and 2 show that anions (Cl^- in 1 and Br^- in 2) are encapsulated within the cage cavity. 1 and 2 bear two coordinated water molecules that are directed inside the cages, surrounded by the eight pyridine rings at the "bottom" and the "roof" of the cage. These hydrogen bond donors, π systems, and the cationic nature of the cages enable 1 and 2 to encapsulate the anions. FL experiments revealed that 1 could detect nitroaromatic compounds by exhibiting selective and sensitive fluorescence quenching toward p-nitroaniline (PNA), recommending a limit of detection of 4.24 ppm. Moreover, the addition of 50 μL of PNA and o-nitrophenol to the ethanolic suspension of 1 led to a significant large FL red shift, namely, 87 and 24 nm, respectively, which were significantly higher than the corresponding values observed in the presence of other nitroaromatic compounds. The titration of the ethanolic suspension of 1, with various concentrations of PNA (>12 μM) demonstrated a concentration-dependent emission red shift. Hence, the efficient FL quenching of 1 was capable of distinguishing the dinitrobenzene isomers. Meanwhile, the observed red shift (10 nm) and quenching of this emission band under the influence of a trace amount of o- and p-nitrophenol isomers also showed that 1 could discriminate between o- and p-nitrophenol. Replacement of the chlorido with a bromido ligand in 1 generated cage 2 which was a more electron-donating cage than 1. The FL experiments showed that 2 was partially more sensitive and less selective toward NACs than 1.

Multicomponent Anti-Kasha's Rule Emission from Nanotubular Metal-Organic Frameworks for Selective Detection of Small Molecules

The peak photoluminescence (PL) of conventional fluorophores is independent of the excitation wavelength (called Kasha's rule), while the search of metal-organic framework materials with the so-called anti-Kasha's rule emission remains very limited. Herein, we report the observation of anti-Kasha's rule emission in a multicomponent PL three-dimensional nanotubular metal-organic framework (abbr. MOF-NT), [Zn(μ-L)(μ-bix)]_n·0.33nH₂O [H₂L = biphenyl-3,5-dicarboxylic acid; bix = 1,4-bis(imidazole-1-ylmethyl)benzene]. The MOF-NT crystalline sample represents a notable example of strong excitation-dependent fluorescence from the ultraviolet to the visible spectral region. Moreover, by virtue of electronic flexibility and high PL efficiency, MOF-NT shows a discriminative PL response between isomeric nitroaromatic compounds. The work demonstrated the intrinsic anti-Kasha's rule emission in the crystalline-state MOF materials, providing new visions for the development of advanced solid-state emissive materials.

Multifunctional luminescent Zr(IV)-MOF for rapid and efficient detection of vanillin, CrO42- and Cr2O72- ions

Fast and efficient detection of pollutants in the food or wastewater is an urgent need for protecting human health and ecological environment. Herein, a luminescent Zr(IV)-MOF (HBU-20) has been conveniently synthesized. It could be used as a fluorescent probe for detection of vanillin, CrO₄^2-, and Cr₂O₇^2- in aqueous medium. All the fluorescence response time is less than 10 s and the detection limits of vanillin, CrO₄^2- and Cr₂O₇^2- achieve 0.38 μM, 0.065 μM and 0.0089 μM, respectively. Interestingly, common anions, cations and amino acids in the solution can not affect the fluorescence detection. Meanwhile, the fluorescence detection process can be successfully implemented even under strong acid or strong alkaline conditions. Further research shows that the inner filter effect (IFE) plays a major role in the sensing process. The rapid and sensitive fluorescence responses indicate that the compound is a promising multifunctional probe for sensing toxic substance. The results can provide an important reference for the design of new fluorescent probes.

Novel Approach for Detecting Vapors of Acids and Bases with Proton-Transfer Luminescent Dyes Encapsulated within Metal-Organic Frameworks

Luminescent metal-organic frameworks (LMOFs) are one of the most promising materials for being implemented as active layers in the fabrication of photonic devices such as luminescent sensors of harmful chemicals. It is highly desirable that these materials undergo quantifiable spectroscopic (absorption or emission) changes in the presence of vapors of those analytes, as in many industrial processes, these toxic compounds are in the gas phase. Although great progresses have been achieved in the field, in most of the examples reported hitherto, the detection of chemicals by LMOFs is attained in solution. Herein, we present a novel approach consisting of the encapsulation of proton transfer dyes (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt, HPTS, and 3-hydroxyflavone, 3-HF) within the pores of two distinct MOFs. The trapped proton transfer dyes (PT-dyes) may exist as different structures (enol, anion, or zwitterion), each of these exhibiting unique optical properties. Indeed, our findings reveal that the dyes can be encapsulated as anionic or enol species. Remarkably, the PT-dye@MOF composites exhibit a high luminescence quantum yield (up to 30%), which is sensitive (showing shifting in the emission wavelengths with a concomitant quenching/enhancement of the intensity) in the presence of vapors of an acid (HCl) and a base (triethylamine). These results open a novel avenue for the development of smarter vapoluminescent MOF-based materials.

Confinement of Luminescent Guests in Metal–Organic Frameworks: Understanding Pathways from Synthesis and Multimodal Characterization to Potential Applications of LG@MOF Systems

This review gives an authoritative, critical, and accessible overview of an emergent class of fluorescent materials termed “LG@MOF”, engineered from the nanoscale confinement of luminescent guests (LG) in a metal–organic framework (MOF) host, realizing a myriad of unconventional materials with fascinating photophysical and photochemical properties. We begin by summarizing the synthetic methodologies and design guidelines for representative LG@MOF systems, where the major types of fluorescent guest encompass organic dyes, metal ions, metal complexes, metal nanoclusters, quantum dots, and hybrid perovskites. Subsequently, we discuss the methods for characterizing the resultant guest–host structures, guest loading, photophysical properties, and review local-scale techniques recently employed to elucidate guest positions. A special emphasis is paid to the pros and cons of the various methods in the context of LG@MOF. In the following section, we provide a brief tutorial on the basic guest–host phenomena, focusing on the excited state events and nanoscale confinement effects underpinning the exceptional behavior of LG@MOF systems. The review finally culminates in the most striking applications of LG@MOF materials, particularly the “turn-on” type fluorochromic chemo- and mechano-sensors, noninvasive thermometry and optical pH sensors, electroluminescence, and innovative security devices. This review offers a comprehensive coverage of general interest to the multidisciplinary materials community to stimulate frontier research in the vibrant sector of light-emitting MOF composite systems.

Interrogating the Behaviour of a Styryl Dye Interacting with a Mesoscopic 2D-MOF and Its Luminescent Vapochromic Sensing

In this contribution, we report on the solid-state-photodynamical properties and further applications of a low dimensional composite material composed by the luminescent trans-4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) dye interacting with a two-dimensional-metal organic framework (2D-MOF), Al-ITQ-HB. Three different samples with increasing concentration of DCM are synthesized and characterized. The broad UV-visible absorption spectra of the DCM/Al-ITQ-HB composites reflect the presence of different species of DCM molecules (monomers and aggregates). In contrast, the emission spectra are narrower and exhibit a bathochromic shift upon increasing the DCM concentration, in agreeance with the formation of adsorbed aggregates. Time-resolved picosecond (ps)-experiments reveal multi-exponential behaviors of the excited composites, further confirming the heterogeneous nature of the samples. Remarkably, DCM/Al-ITQ-HB fluorescence is sensitive to vapors of electron donor aromatic amine compounds like aniline, methylaniline, and benzylamine due to a H-bonding-induced electron transfer (ET) process from the analyte to the surface-adsorbed DCM. These findings bring new insights on the photobehavior of a well-known dye when interacting with a 2D-MOF and its possible application in sensing aniline derivatives.

Dye-Encapsulated Zeolitic Imidazolate Framework (ZIF-71) for Fluorochromic Sensing of Pressure, Temperature, and Volatile Solvents

Luminescent metal-organic frameworks (MOFs) offer a multifunctional platform for creating noninvasive sensors and tunable optoelectronics. However, fluorochromic materials that are photophysically resilient and show high sensitivity toward different physical and chemical stimuli are scarce. We report a facile host-guest nanoconfinement strategy to construct a fluorescent hybrid material with multiple sensing capabilities. We design and fabricate a new Guest@MOF material: comprising a zeolitic MOF (ZIF-71) as a nanoporous host for encapsulating rhodamine B (RhB dye) guest molecules, resulting in an RhB@ZIF-71 system with mechanochromic, thermochromic, and solvatochromic sensing response. The fluorochromic sensing properties stem from the nanoconfinement effect that ZIF-71 imposes on RhB monomers, yielding the H- or J-type aggregates with tunable photophysical and photochemical properties. For mechanochromism, the external pressure causes an emission red shift in a linear fashion, switching RhB guests from H-type to J-type aggregates through a shear deformation. For thermochromism, we demonstrate a linear scaling as a function of temperature due to the spatial restriction imposed on J-type aggregates incarcerated in ZIF-71 pores. Harnessing the solvatochromism of RhB@ZIF-71, we interrogated its photochemical response by employing three diverse groups of volatile organic compounds. The multimodal sensing response paved the way to smart applications like photonic pressure sensors, noninvasive thermometers, and ultrasensitive chemosensors.

Femto- to Millisecond Time-Resolved Photodynamics of a Double-Functionalized Push-Pull Organic Linker: Potential Candidate for Optoelectronically Active MOFs

The design of improved organic linkers for the further engineering of smarter metal–organic framework (MOF) materials has become a paramount task for a wide number of material scientists. In this report, a luminescent double-functionalized push–pull (electron donor–acceptor) archetype organic molecule, dimethyl 4-amino-8-cyanonaphthalene-2,6-dicarboxylate (Me₂CANADC), has been synthesized and characterized. The optical steady-state properties of Me₂CANADC are strongly influenced by the surrounding environment as a direct consequence of its strong charge transfer (CT) character. The relaxation from its first electronically excited singlet state follows a double pathway: (1) on one side deactivating from its local excited (LE) state in the sub-picosecond or picosecond time domain, and (2) on the other side undergoing an ultrafast intramolecular charge transfer (ICT) reaction that is slowing down in viscous solvents. The deactivation to the ground state of these species with CT character is the origin of the Me₂CANADC luminescence, and they present solvent-dependent lifetime values ranging from 8 to 18 ns. The slow photodynamics of Me₂CANADC unveils the coexistence of a non-emissive triplet excited state and the formation of a long-lived charge separated state (2 µs). These observations highlight the promising optical properties of Me₂CANADC linker, opening a window for the design of new functional MOFs with huge potential to be applied in the fields of luminescent sensing and optoelectronics.

A down converting serine-functionalised NaYF4:Ce3+/Gd3+/Eu3+@NaGdF4:Tb3+ photoluminescent probe for chemical sensing of explosive nitroaromatic compounds

In this contribution, we explored a novel serine-functionalised NaYF₄:Ce³⁺/Gd³⁺/Eu³⁺@NaGdF₄:Tb³⁺ core–shell nanophosphor as a down-converting photoluminescent probe for efficient sensing of nitroaromatic explosives.

Two anthracene chromophore based metal–organic frameworks for gas adsorption and promising nitro aromatic sensing

Two novel metal–organic frameworks (MOFs) have been synthesized under solvothermal conditions. Studies on luminescence sensing show 1 and 2 are highly selective and recyclable in the detection of nitroaromatic explosives, especially for TNP.

Unravelling Why and to What Extent the Topology of Similar Ce-Based MOFs Conditions their Photodynamic: Relevance to Photocatalysis and Photonics

Metal-organic frameworks (MOFs) are emerging materials for luminescent and photochemical applications. Armed with femto to millisecond spectroscopies, and fluorescence microscopy, the photobehaviors of two Ce-based MOFs are unravelled: Ce-NU-1000 and Ce-CAU-24-TBAPy. It is observed that both MOFs show ligand-to-cluster charge transfer reactions in ≈100 and ≈70 fs for Ce-NU-1000 and Ce-CAU-24-TBAPy, respectively. The formed charge separated states, resulting in electron and hole generation, recombine in different times for each MOF, being longer in Ce-CAU-24-TBAPy: 1.59 and 13.43 µs than in Ce-NU-1000: 0.64 and 4.91 µs. The linkers in both MOFs also undergo a very fast intramolecular charge transfer reaction in ≈160 fs. Furthermore, the Ce-NU-1000 MOF reveals excimer formation in 50 ps, and lifetime of ≈14 ns. The lack of this interlinkers event in Ce-CAU-24-TBAPy arises from topological restriction and demonstrates the structural differences between the two frameworks. Single-crystal fluorescence microscopy of Ce-CAU-24-TBAPy shows the presence of a random distribution of defects along the whole crystal, and their impact on the observed photobehavior. These findings reflect the effect of linkers topology and metal clusters orientations on the outcome of electronic excitation of reticular structure, key to their applicability in different fields of science and technology, such as photocatalysis and photonics.

Aqueous Phase Sensing of Fe3+ and Ascorbic Acid by a Metal-Organic Framework and Its Implication in the Construction of Multiple Logic Gates

A new Hf^IV -based metal-organic framework with UiO-66 topology was synthesized via a one-step solvothermal method by using 3-methyl-4-phenylthieno[2,3-b]thiophene-2,5-dicarboxylic acid (H₂ MPTDC) as a ligand. The MOF material showed a high stability in a broad pH range (from pH 2 to pH 12) in an aqueous medium. The presence of hydrophobic methyl and phenyl substituents in the carboxylic acid ligand and strong Hf-O bond play crucial roles in its stability. The new MOF material was systematically characterized by various techniques such as XRPD, N₂ sorption, thermogravimetric analyses and FT-IR spectroscopy. The photophysical properties of the MOF material were also examined by steady-state and time-resolved fluorescence studies. It was observed that the blue fluorescence of the MOF material was selectively quenched in the presence of Fe³⁺ ion in pure aqueous medium. A mechanistic study disclosed that quenching occurs via a strong inner filter effect (IFE) arising from Fe³⁺ ion in aqueous medium. Interestingly, the fluorescence of the MOF material can be recovered by elimination of the IFE of Fe³⁺ ion via reduction of Fe³⁺ ion by ascorbic acid (AA). Based on the fluorescence recovery by AA, a MOF based on-off-on probe was developed for the sensing of Fe³⁺ ion and AA in aqueous medium. Inspired by this reversible sensing event, we demonstrate basic (NOT, OR, YES, INHIBIT and IMP) and higher integrated logic operations utilizing this fluorescent MOF. This MOF-based logic systems could be potentially used for next-generation logic-gate based analytical applications as well as for the detection and discrimination of targeted molecules in various complex domains.

Adsorption and Detection of Hazardous Trace Gases by Metal-Organic Frameworks

The quest for advanced designer adsorbents for air filtration and monitoring hazardous trace gases has recently been more and more driven by the need to ensure clean air in indoor, outdoor, and industrial environments. How to increase safety with regard to personal protection in the event of hazardous gas exposure is a critical question for an ever-growing population spending most of their lifetime indoors, but is also crucial for the chemical industry in order to protect future generations of employees from potential hazards. Metal-organic frameworks (MOFs) are already quite advanced and promising in terms of capacity and specific affinity to overcome limitations of current adsorbent materials for trace and toxic gas adsorption. Due to their advantageous features (e.g., high specific surface area, catalytic activity, tailorable pore sizes, structural diversity, and range of chemical and physical properties), MOFs offer a high potential as adsorbents for air filtration and monitoring of hazardous trace gases. Three advanced topics are considered here, in applying MOFs for selective adsorption: (i) toxic gas adsorption toward filtration for respiratory protection as well as indoor and cabin air, (ii) enrichment of hazardous gases using MOFs, and (iii) MOFs as sensors for toxic trace gases and explosives.

A recognition mechanism study: Luminescent metal-organic framework for the detection of nitro-explosives

This article presents a recognition mechanism for nitro-explosives by the luminescent metal-organic framework 1 (LMOF-1) with the aid of density functional theory (DFT) and time-dependent density functional theory (TDDFT). The behavior of hydrogen bonding between the LMOF-1 and nitro-explosives in the S₁ state is closely associated with the fluorescence properties of the LMOF-1. In our research, we calculated the geometric configuration, ¹H NMR and IR spectra of the Complex 2 formed by LMOF-1 and nitrobenzene in the S₀ and S₁ states. The results showed that the hydrogen bond in the S₁ state was increased, which was unfavorable for the luminescence of LMOF-1. Furthermore, the fluorescence rate of LMOF-1 decreased after encapsulating nitrobenzene into it. These calculated results collectively suggest that LMOF-1 is a potential fluorescence sensor for the detection of nitro-explosives. This research was aiming to provide a better understanding of the recognition mechanism by LMOFs for nitro-explosives.

Engineering design toward exploring the functional group substitution in 1D channels of Zn–organic frameworks upon nitro explosives and antibiotics detection

Three MOFs (1, 2, 3) with distinct functional groups were prepared. 2 exhibited moderate sensitivity for the detection of specific explosives/antibiotics at the same concentration, which was lower and higher than that of 3 and 1, respectively.

Luminescent metal–organic frameworks as chemical sensors: common pitfalls and proposed best practices

In this review we approach the emerging field of sensors based on luminescent metal–organic frameworks from the perspective of the most commonly encountered pitfalls and we suggest best practices so that they can be avoided.