The interfacial electrostatic potential modulates the insertion of cell-penetrating peptides into lipid bilayers

Membrane Binding Strength vs Pore Formation Cost─What Drives the Membrane Permeation of Nanoparticles Coated with Cell-Penetrating Peptides?

Cell-penetrating peptides (CPPs) enable the transport of nanoparticles through cell membranes. Using molecular simulations, we conduct an in-depth investigation into the thermodynamic forces governing the passive translocation of CPP-coated nanoparticles across lipid bilayers, contrasting their behavior with that of bare particles to dissect the contribution of the peptides. Our analysis unveils a distinctive two-stage translocation mechanism, where the adsorption energy of the particles overcomes the cost of forming a hydrophilic transmembrane pore. Proper evaluation of the translocation mechanisms is only possible when using two reaction coordinates, in particular, one that explicitly includes the density of the lipids on the binding site of the particle. An analysis of adsorption and activation free energies in terms of a simple kinetic model provides a clearer understanding of the CPP effect. Experimental validation using nonendocytic cells confirms the superior membrane permeation of CPP-coated particles. Our findings have implications for the rational design of more efficient cell-permeating particles.

Peptide Power: Mechanistic Insights into the Effect of Mitochondria-Targeted Tetrapeptides on Membrane Electrostatics from Molecular Simulations

Mitochondrial dysfunction is implicated in nine of the ten leading causes of death in the US, yet there are no FDA-approved therapeutics to treat it. Synthetic mitochondria-targeted peptides (MTPs), including the lead compound SS-31, offer promise, as they have been shown to restore healthy mitochondrial function and treat a variety of common diseases. At the cellular level, research has shown that MTPs accumulate strongly at the inner mitochondrial membrane (IMM), slow energy sinks (e.g., proton leaks), and improve ATP production. Modulation of electrostatic fields around the IMM has been implicated as a key aspect in the mechanism of action (MoA) of these peptides; however, molecular and mechanistic details have remained elusive. In this study, we employed all-atom molecular dynamics simulations (MD) to investigate the interactions of four MTPs with lipid bilayers and calculate their effect on structural and electrostatic properties. In agreement with previous experimental findings, we observed the modulation of the membrane surface and dipole potentials by MTPs. The simulations reveal that the MTPs achieve a reduction in the dipole potential by acting to disorder both lipid head groups and water layers proximal to the bilayer surface. We also find that MTPs decrease the bilayer thickness and increase the membrane's capacitance. These changes suggest that MTPs may enhance how much potential energy can be stored across the IMM at a given transmembrane potential difference. The MTPs also displace cations away from the bilayer surface, modulating the surface potential and offering an alternative mechanism for how these MTPs reduce mitochondrial energy sinks like proton leaks and mitigate Ca2+ accumulation stress. In conclusion, this study highlights the therapeutic potential of MTPs and underlines how interactions of MTPs with lipid bilayers serve as a fundamental component of their MoA.

Molecular Dynamics Simulations of Drug-Conjugated Cell-Penetrating Peptides

Cell-penetrating peptides (CPPs) are small peptides capable of translocating through biological membranes carrying various attached cargo into cells and even into the nucleus. They may also participate in transcellular transport. Our in silico study intends to model several peptides and their conjugates. We have selected three CPPs with a linear backbone, including penetratin, a naturally occurring oligopeptide; two of its modified sequence analogues (6,14-Phe-penetratin and dodeca-penetratin); and three natural CPPs with a cyclic backbone: Kalata B1, the Sunflower trypsin inhibitor 1 (SFT1), and Momordica cochinchinensis trypsin inhibitor II (MCoTI-II). We have also built conjugates with the small-molecule drug compounds doxorubicin, zidovudine, and rasagiline for each peptide. Molecular dynamics (MD) simulations were carried out with explicit membrane models. The analysis of the trajectories showed that the interaction of penetratin with the membrane led to spectacular rearrangements in the secondary structure of the peptide, while cyclic peptides remained unchanged due to their high conformational stability. Membrane-peptide and membrane-conjugate interactions have been identified and compared. Taking into account well-known examples from the literature, our simulations demonstrated the utility of computational methods for CPP complexes, and they may contribute to a better understanding of the mechanism of penetration, which could serve as the basis for delivering conjugated drug molecules to their intracellular targets.

Adsorption/Desorption of Cationic-Hydrophobic Peptides on Zwitterionic Lipid Bilayer Is Associated with the Possibility of Proton Transfer

Cell-penetrating peptides (CPPs) are short peptides built up from dominantly cationic and hydrophobic amino acid residues with a distinguished ability to pass through the cell membrane. Due to the possibility of linking and delivering the appropriate cargo at the desired location, CPPs are considered an economic and less invasive alternative to antibiotics. Besides knowing that their membrane passage mechanism is a complex function of CPP chemical composition, the ionic strength of the solution, and the membrane composition, all other details on how they penetrate cell membranes are rather vague. The aim of this study is to elucidate the ad(de)sorption of arginine-/lysine- and phenylalanine-rich peptides on a lipid membrane composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipids. DSC and temperature-dependent UV-Vis measurements confirmed the impact of the adsorbed peptides on thermotropic properties of DPPC, but in an inconclusive way. On the other hand, FTIR spectra acquired at 30 °C and 50 °C (when DPPC lipids are found in the gel and fluid phase, respectively) unambiguously confirmed the proton transfer between particular titratable functional groups of R5F2/K5F2 that highly depend on their immediate surroundings (DPPC or a phosphate buffer). Molecular dynamic simulations showed that both peptides may adsorb onto the bilayer, but K5F2 desorbs more easily and favors the solvent, while R5F2 remains attached. The results obtained in this work highlight the importance of proton transfer in the design of CPPs with their desired cargo, as its charge and composition dictates the possibility of entering the cell.

Effect of the Lipid Landscape on the Efficacy of Cell-Penetrating Peptides

Every cell biological textbook teaches us that the main role of the plasma membrane is to separate cells from their neighborhood to allow for a controlled composition of the intracellular space. The mostly hydrophobic nature of the cell membrane presents an impenetrable barrier for most hydrophilic molecules larger than 1 kDa. On the other hand, cell-penetrating peptides (CPPs) are capable of traversing this barrier without compromising membrane integrity, and they can do so on their own or coupled to cargos. Coupling biologically and medically relevant cargos to CPPs holds great promise of delivering membrane-impermeable drugs into cells. If the cargo is able to interact with certain cell types, uptake of the CPP-drug complex can be tailored to be cell-type-specific. Besides outlining the major membrane penetration pathways of CPPs, this review is aimed at deciphering how properties of the membrane influence the uptake mechanisms of CPPs. By summarizing an extensive body of experimental evidence, we argue that a more ordered, less flexible membrane structure, often present in the very diseases planned to be treated with CPPs, decreases their cellular uptake. These correlations are not only relevant for understanding the cellular biology of CPPs, but also for rationally improving their value in translational or clinical applications.

No country for old antibiotics! Antimicrobial peptides (AMPs) as next-generation treatment for skin and soft tissue infection

In recent years, the unprecedented rise of bacterial antibiotic resistance together with the lack of adequate therapies have made the treatment of skin infections and chronic wounds challenging, urging the scientific community to focus on the development of new and more efficient treatment strategies. In this context, there is a growing interest in the use of natural molecules with antimicrobial features, capable of supporting wound healing i.e., antimicrobial peptides (AMPs), for the treatment of skin and soft tissue infections. In this review, we give a short overview of the bacterial skin infections as well as some of the classic treatments used for topical application. We then summarize the AMPs classes, stressing the importance of the appropriate selection of the peptides based on their characteristics and physicochemical properties in order to maximize the antibacterial efficacy of the therapeutic systems against multi-drug resistant pathogens. Additionally, the present paper provides a comprehensive and rigorous assessment of the latest clinical trials investigating the efficacy of AMPs in the treatment of skin and soft tissue infections, highlighting the relevant outcomes. Seeking to obtain novel and improved compounds with synergistic activity, while also decreasing some of the known side effects of AMPs, we present two employed strategies using AMPs: (i) AMPs-conjugated nanosystems for systemic and topical drug delivery systems and (ii) antibiotics-peptide conjugates as a strategy to overcome antibiotics resistance. Finally, an important property of some of the AMPs used in wound treatment is highlighted: their ability to help in wound healing by generally promoting cell proliferation and migration, and in some cases re-epithelialization and angiogenesis among others. Thus, as the pursuit of improvement is an ongoing effort, this work presents the advances made in the treatment of skin and soft tissue infections along with their advantages and limitations, while the still remaining challenges are addressed by providing future prospects and strategies to overcome them.

Translocation of a single Arg[Formula: see text] peptide across a DOPC/DOPG(4:1) model membrane using the weighted ensemble method

It is difficult to observe a spontaneous translocation of cell-penetrating peptides(CPPs) within a short time scale (e.g., a few hundred ns) in all-atom molecular dynamics(MD) simulations because the time required for the translocation of usual CPPs is on the order of minutes or so. In this work, we report a spontaneous translocation of a single Arg[Formula: see text](R9) across a DOPC/DOPG(4:1) model membrane within an order of a few tens ns scale by using the weighted ensemble(WE) method. We identify how water molecules and the orientation of Arg[Formula: see text] play a role in translocation. We also show how lipid molecules are transported along with Arg[Formula: see text]. In addition, we present free energy profiles of the translocation across the membrane using umbrella sampling and show that a single Arg[Formula: see text] translocation is energetically unfavorable. We expect that the WE method can help study interactions of CPPs with various model membranes within MD simulation approaches.

Free-Energy Profiles for Membrane Permeation of Compounds Calculated Using Rare-Event Sampling Methods

The free-energy profile of a compound is an essential measurement in evaluating the membrane permeation process by means of theoretical methods. Computationally, molecular dynamics (MD) simulation allows the free-energy profile calculation. However, MD simulations frequently fail to sample membrane permeation because they are rare events induced in longer timescales than the accessible timescale of MD, leading to an insufficient conformational search to calculate an incorrect free-energy profile. To achieve a sufficient conformational search, several enhanced sampling methods have been developed and elucidated the membrane permeation process. In addition to these enhanced sampling methods, we proposed a simple yet powerful free-energy calculation of a compound for the membrane permeation process based on originally rare-event sampling methods developed by us. Our methods have a weak dependency on external biases and their optimizations to promote the membrane permeation process. Based on distributed computing, our methods only require the selection of initial structures and their conformational resampling, whereas the enhanced sampling methods may be required to adjust external biases. Furthermore, our methods efficiently search membrane permeation processes with simple scripts without modifying any MD program. As demonstrations, we calculated the free-energy profiles of seven linear compounds for their membrane permeation based on a hybrid conformational search using two rare-event sampling methods, that is, (1) parallel cascade selection MD (PaCS-MD) and (2) outlier flooding method (OFLOOD), combined with a Markov state model (MSM) construction. In the first step, PaCS-MD generated initial membrane permeation paths of a compound. In the second step, OFLOOD expanded the unsearched conformational area around the initial paths, allowing for a broad conformational search. Finally, the trajectories were employed to construct reliable MSMs, enabling correct free-energy profile calculations. Furthermore, we estimated the membrane permeability coefficients of all compounds by constructing the reliable MSMs for their membrane permeation. In conclusion, the calculated coefficients were qualitatively correlated with the experimental measurements (correlation coefficient (R²) = 0.8689), indicating that the hybrid conformational search successfully calculated the free-energy profiles and membrane permeability coefficients of the seven compounds.

Design of Peptides for Membrane Insertion: The Critical Role of Charge Separation

A physical understanding of membrane permeation and translocation by small, positively charged molecules can illuminate cell penetrating peptide mechanisms of entry and inform drug design. We have previously investigated the permeation of the doubly charged peptide WKW and proposed a defect-assisted permeation mechanism where a small molecule with +2 charge can achieve a metastable state spanning the bilayer by forming a membrane defect with charges stabilized by phospholipid phosphate groups. Here, we investigate the membrane permeation of two doubly charged peptides, WWK and WWWK, with charges separated by different lengths. Through complementary experiments and molecular dynamics simulations, we show that membrane permeation was an order of magnitude more favorable when charges were separated by an ∼2-3 Å greater distance on WWWK compared to WWK. These results agree with the previously proposed defect-assisted permeation mechanism, where a greater distance between positive charges would require a less extreme membrane defect to stabilize the membrane-spanning metastable state. We discuss the implications of these results in understanding the membrane permeation of cell-penetrating peptides and other small, positively charged membrane permeants.

Tryptophan, more than just an interfacial amino acid in the membrane activity of cationic cell-penetrating and antimicrobial peptides

Trp is unique among the amino acids since it is involved in many different types of noncovalent interactions such as electrostatic and hydrophobic ones, but also in π-π, π-cation, π-anion and π-ion pair interactions. In membranotropic peptides and proteins, Trp locates preferentially at the water-membrane interface. In antimicrobial or cell-penetrating peptides (AMPs and CPPs respectively), Trp is well-known for its strong role in the capacity of these peptides to interact and affect the membrane organisation of both bacteria and animal cells at the level of the lipid bilayer. This essential amino acid can however be involved in other types of interactions, not only with lipids, but also with other membrane partners, that are crucial to understand the functional roles of membranotropic peptides. This review is focused on this latter less known role of Trp and describes in details, both in qualitative and quantitative ways: (i) the physico-chemical properties of Trp; (ii) its effect in CPP internalisation; (iii) its importance in AMP activity; (iv) its role in the interaction of AMPs with glycoconjugates or lipids in bacteria membranes and the consequences on the activity of the peptides; (v) its role in the interaction of CPPs with negatively charged polysaccharides or lipids of animal membranes and the consequences on the activity of the peptides. We intend to bring highlights of the physico-chemical properties of Trp and describe its extensive possibilities of interactions, not only at the well-known level of the lipid bilayer, but with other less considered cell membrane components, such as carbohydrates and the extracellular matrix. The focus on these interactions will allow the reader to reevaluate reported studies. Altogether, our review gathers dedicated studies to show how unique are Trp properties, which should be taken into account to design future membranotropic peptides with expected antimicrobial or cell-penetrating activity.

Amphiphilic Cell-Penetrating Peptides Containing Natural and Unnatural Amino Acids as Drug Delivery Agents

A series of cyclic peptides, [(DipR)(WR)₄], [(DipR)₂(WR)₃], [(DipR)₃(WR)₂], [(DipR)₄(WR)], and [DipR]₅, and their linear counterparts containing arginine (R) as positively charged residues and tryptophan (W) or diphenylalanine (Dip) as hydrophobic residues, were synthesized and evaluated for their molecular transporter efficiency. The in vitro cytotoxicity of the synthesized peptides was determined in human epithelial ovary adenocarcinoma cells (SK-OV-3), human lymphoblast peripheral blood cells (CCRF-CEM), human embryonic epithelial kidney healthy cells (HEK-293), human epithelial mammary gland adenocarcinoma cells (MDA-MB-468), pig epithelial kidney normal cells (LLC-PK1), and human epithelial fibroblast uterine sarcoma cells (MES-SA). A concentration of 5–10 µM and 3 h incubation were selected in uptake studies. The cellular uptake of a fluorescent-labeled phosphopeptide, stavudine, lamivudine, emtricitabine, and siRNA was determined in the presence of peptides via flow cytometry. Among the peptides, [DipR]₅ (10 µM) was found to be the most efficient transporter and significantly improved the uptake of F’-GpYEEI, i.e., by approximately 130-fold after 3 h incubation in CCRF-CEM cells. Confocal microscopy further confirmed the improved delivery of fluorescent-labeled [DipR]₅ (F’-[K(DipR)₅]) alone and F’-GpYEEI in the presence of [DipR]₅ in MDA-MB-231 cells. The uptake of fluorescent-labeled siRNA (F’-siRNA) in the presence of [DipR]₅ with N/P ratios of 10 and 20 was found to be 30- and 50-fold higher, respectively, compared with the cells exposed to F’-siRNA alone. The presence of endocytosis inhibitors, i.e., nystatin, chlorpromazine, chloroquine, and methyl β-cyclodextrin, did not completely inhibit the cellular uptake of F’-[K(DipR)₅] alone or F’-GpYEEI in the presence of [DipR]₅, suggesting that a combination of mechanisms contributes to uptake. Circular dichroism was utilized to determine the secondary structure, while transmission electron microscopy was used to evaluate the particle sizes and morphology of the peptides. The data suggest the remarkable membrane transporter property of [DipR]₅ for improving the delivery of various small molecules and cell-impermeable negatively charged molecules (e.g., siRNA and phosphopeptide).

Voltage-Induced Adsorption of Cationic Nanoparticles on Lipid Membranes

We evaluate the effects of an applied electric potential on the adsorption/desorption mechanism of cationic nanoparticles on lipid membranes. By applying a molecular theory that allows calculating nanoparticle adsorption isotherms and free-energy profiles, we identify the conditions under which the external voltage promotes the adsorption of nanoparticles coated with cell penetrating peptides. We consider symmetric and asymmetric membranes made of neutral and acidic lipids and cover a wide range of environmental conditions (external voltage, pH, salt, and nanoparticles concentration) relevant to both electrochemical experiments and biological systems. For neutral membranes at low concentration of salt, a moderate external voltage (<100 mV) induces spontaneous adsorption of nanoparticles. For membranes containing a small fraction of anionic lipids, the external potential has little effect on the interfacial concentration of nanoparticles, and the membrane surface charge dominates the adsorption behavior. In all cases, the membrane-particle effective interactions, and its dependence on the external bias, are strongly modulated by the concentration of salt. At 100 mM NaCl, the external potential has almost no effect on the adsorption free energy profiles. In general, we provide a theoretical framework to evaluate the conditions under which nanoparticles are thermodynamically adsorbed or kinetically restrained to the vicinity of the membrane, and to assess the impact of the nanoparticles on the interfacial electrostatic properties.

Effect of Ionic Strength on Ibuprofenate Adsorption on a Lipid Bilayer of Dipalmitoylphosphatidylcholine from Molecular Dynamics Simulations

In this work, the free energy change in the process of transferring ibuprofenate from the bulk solution to the center of a model of the dipalmitoylphosphatidylcholine bilayer at different NaCl concentrations was calculated. Two minima were found in the free energy profile: a local minimum, located in the vicinity of the membrane, and the global free energy minimum, found near the headgroup region. The downward shift of free energy minima with increasing NaCl concentration is consistent with the results of previous works. Conversely, the upward shift of the free energy maximum with increasing ionic strength is due to the competition of sodium ions and lipids molecules to coordinate with ibuprofenate and neutralize its charge. In addition, normal molecular dynamics simulations were performed to study the effects of the ibuprofenate on the lipid bilayer and in the presence of a high ibuprofenate concentration. The effect of ionic strength on the properties of the lipid bilayer and on lipid-drug interactions was analyzed. The area per lipid shrinking with increasing ionic strength, volume of lipids, and thickness of the bilayer is consistent with the experimental results. At a very high ibuprofenate concentration, the lipid bilayer dehydrates, and it consequently transforms into the gel phase, thus blocking the permeation.

Cell-Penetrating Peptides

In this introductory chapter, we first define cell-penetrating peptides (CPPs), give short overview of CPP history and discuss several aspects of CPP classification. Next section is devoted to the mechanism of CPP penetration into the cells, where direct and endocytic internalization of CPP is explained. Kinetics of internalization is discussed more extensively, since this topic is not discussed in other chapters of this book. At the end of this section some features of the thermodynamics of CPP interaction with the membrane is also presented. Finally, we present different cargoes that can be transferred into the cells by CPPs and briefly discuss the effect of cargo on the rate and efficiency of penetration into the cells.

Genetic, cellular, and structural characterization of the membrane potential-dependent cell-penetrating peptide translocation pore

Cell-penetrating peptides (CPPs) allow intracellular delivery of bioactive cargo molecules. The mechanisms allowing CPPs to enter cells are ill-defined. Using a CRISPR/Cas9-based screening, we discovered that KCNQ5, KCNN4, and KCNK5 potassium channels positively modulate cationic CPP direct translocation into cells by decreasing the transmembrane potential (V_m). These findings provide the first unbiased genetic validation of the role of V_m in CPP translocation in cells. In silico modeling and live cell experiments indicate that CPPs, by bringing positive charges on the outer surface of the plasma membrane, decrease the V_m to very low values (–150 mV or less), a situation we have coined megapolarization that then triggers formation of water pores used by CPPs to enter cells. Megapolarization lowers the free energy barrier associated with CPP membrane translocation. Using dyes of varying dimensions in CPP co-entry experiments, the diameter of the water pores in living cells was estimated to be 2 (–5) nm, in accordance with the structural characteristics of the pores predicted by in silico modeling. Pharmacological manipulation to lower transmembrane potential boosted CPP cellular internalization in zebrafish and mouse models. Besides identifying the first proteins that regulate CPP translocation, this work characterized key mechanistic steps used by CPPs to cross cellular membranes. This opens the ground for strategies aimed at improving the ability of cells to capture CPP-linked cargos in vitro and in vivo.

Before a drug can have its desired effect, it must reach its target tissue or organ, and enter its cells. This is not easy because cells are surrounded by the plasma membrane, a fat-based barrier that separates the cell from its external environment. The plasma membrane contains proteins that act as channels, shuttling specific molecules in and out of the cell, and it also holds charge, with its inside surface being more negatively charged than its outside surface.

Cell-penetrating peptides are short sequences of amino acids (the building blocks that form proteins) that carry positive charges. These positive charges allow them to cross the membrane easily, but it is not well understood how.

To find out how cell-penetrating peptides cross the membrane, Trofimenko et al. attached them to dyes of different sizes. This revealed that the cell-penetrating peptides enter the cell through temporary holes called water pores, which measure about two nanometres across. The water pores form when the membrane becomes ‘megapolarized’, this is, when the difference in charge between the inside and the outside of the membrane becomes greater than normal. This can happen when the negative charge on the inside surface or the positive charge on the outer surface of the membrane increase. Megapolarization depends on potassium channels, which transport positive potassium ions outside the cell, making the outside of the membrane positive. When cell-penetrating peptides arrive at the outer surface of the cell near potassium channels, they make it even more positive. This increases the charge difference between the inside and the outside of the cell, allowing water pores to form. Once the peptides pass through the pores, the charge difference between the inside and the outside of the cell membrane dissipates, and the pores collapse.

Drug developers are experimenting with attaching cell-penetrating peptides to drugs to help them get inside their target cells. Currently there are several experimental medications of this kind in clinical trials. Understanding how these peptides gain entry, and what size of molecule they could carry with them, provides solid ground for further drug development.

On the Coupling between Mechanical Properties and Electrostatics in Biological Membranes

Cell membrane structure is proposed as a lipid matrix with embedded proteins, and thus, their emerging mechanical and electrostatic properties are commanded by lipid behavior and their interconnection with the included and absorbed proteins, cytoskeleton, extracellular matrix and ionic media. Structures formed by lipids are soft, dynamic and viscoelastic, and their properties depend on the lipid composition and on the general conditions, such as temperature, pH, ionic strength and electrostatic potentials. The dielectric constant of the apolar region of the lipid bilayer contrasts with that of the polar region, which also differs from the aqueous milieu, and these changes happen in the nanometer scale. Besides, an important percentage of the lipids are anionic, and the rest are dipoles or higher multipoles, and the polar regions are highly hydrated, with these water molecules forming an active part of the membrane. Therefore, electric fields (both, internal and external) affects membrane thickness, density, tension and curvature, and conversely, mechanical deformations modify membrane electrostatics. As a consequence, interfacial electrostatics appears as a highly important parameter, affecting the membrane properties in general and mechanical features in particular. In this review we focus on the electromechanical behavior of lipid and cell membranes, the physicochemical origin and the biological implications, with emphasis in signal propagation in nerve cells.

Statin-boosted cellular uptake and endosomal escape of penetratin due to reduced membrane dipole potential

BACKGROUND AND PURPOSE

Cell penetrating peptides are promising tools for delivery of cargo into cells, but factors limiting or facilitating their cellular uptake are largely unknown. We set out to study the effect of the biophysical properties of the cell membrane on the uptake of penetratin, a cell penetrating peptide.

EXPERIMENTAL APPROACH

Using labelling with pH-insensitive and pH-sensitive dyes, the kinetics of cellular uptake and endo-lysosomal escape of penetratin were studied by flow cytometry.

KEY RESULTS

We report that escape of penetratin from acidic endo-lysosomal compartments is retarded compared with its total cellular uptake. The membrane dipole potential, known to alter transmembrane transport of charged molecules, is shown to be negatively correlated with the concentration of penetratin in the cytoplasmic compartment. Treatment of cells with therapeutically relevant concentrations of atorvastatin, an inhibitor of HMG-CoA reductase and cholesterol synthesis, significantly increased endosomal escape of penetratin in two different cell types. This effect of atorvastatin correlated with its ability to decrease the membrane dipole potential.

CONCLUSION AND IMPLICATIONS

These results highlight the importance of the dipole potential in regulating cellular uptake of cell penetrating peptides and suggest a clinically relevant way of boosting this process.

Cell-Penetrating Peptides: Correlation between Peptide-Lipid Interaction and Penetration Efficiency

Cell-penetrating peptides are used in the delivery of peptides and biologics, with some cell-penetrating peptides found to be more efficient than others. The exact mechanism of how they interact with the cell membrane and penetrate it, however, remains unclear. This study attempts to investigate the difference in free energy profiles of three cell-penetrating peptides (TAT, CPP1 and CPP9) with a model lipid bilayer (DOPC) using molecular dynamics pulling simulations with umbrella sampling. Potential mean force (PMF) and free energy barrier between the peptides and DOPC are determined using WHAM analysis and MM-PBSA analysis, respectively. CPP9 is found to have the smallest PMF value, followed by CPP1 and TAT, consistent with the experimental data. YDEGE peptide, however, does not give the highest PMF value, although it is a non-cell-permeable peptide. YDEGE is also found to form water pores, alongside with TAT and CPP9, suggesting that it is difficult to distinguish true water pore formation from artefacts arising from pulling simulations. On the contrary, free energy analysis of the peptide-DOPC complex at the lipid-water interface with MM-PBSA provides results consistent with experimental data with CPP9 having the least interaction with DOPC and lowest free energy barrier, followed by CPP1, TAT and YDEGE. These findings suggest that peptide-lipid interaction at the lipid-water interface has a direct correlation with the penetration efficiency of peptides across the lipid bilayer.

Membrane Binding of Antimicrobial Peptides Is Modulated by Lipid Charge Modification

Peptide interactions with lipid bilayers play a key role in a range of biological processes and depend on electrostatic interactions between charged amino acids and lipid headgroups. Antimicrobial peptides (AMPs) initiate the killing of bacteria by binding to and destabilizing their membranes. The multiple peptide resistance factor (MprF) provides a defense mechanism for bacteria against a broad range of AMPs. MprF reduces the negative charge of bacterial membranes through enzymatic conversion of the anionic lipid phosphatidyl glycerol (PG) to either zwitterionic alanyl-phosphatidyl glycerol (Ala-PG) or cationic lysyl-phosphatidyl glycerol (Lys-PG). The resulting change in the membrane charge is suggested to reduce the binding of AMPs to membranes, thus impeding downstream AMP activity. Using coarse-grained molecular dynamics to investigate the effects of these modified lipids on AMP binding to model membranes, we show that AMPs have substantially reduced affinity for model membranes containing Ala-PG or Lys-PG. More than 5000 simulations in total are used to define the relationship between lipid bilayer composition, peptide sequence (using five different membrane-active peptides), and peptide binding to membranes. The degree of interaction of a peptide with a membrane correlates with the membrane surface charge density. Free energy profile (potential of mean force) calculations reveal that the lipid modifications due to MprF alter the energy barrier to peptide helix penetration of the bilayer. These results will offer a guide to the design of novel peptides, which addresses the issue of resistance via MprF-mediated membrane modification.

Influence of Lipid Composition on the Insertion Process of Glyphosate into Membranes: A Thermodynamic Study

In this work, molecular dynamics simulations were applied to investigate the influence of lipid composition of the model membrane on the insertion of glyphosate (in its charged state, GLYP2-). The profiles of free energy, entropy and enthalpy were obtained through umbrella sampling calculations, for lipid bilayers composed by only 1,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), only 1,2-dipalmitoyl-sn-glycerol-3-phosphoserine (DPPS) or a symmetric binary mixture of DPPC and DPPS. In general, the location, the values of minima and maxima of the free energy, and the trend of free energy profiles are influenced by the lipid composition of the lipid bilayer. The driving force in the glyphosate insertion process depends on the lipid composition of the membrane model. If the lipid bilayer is composed solely of DPPS or DPPC, GLYP2- insertion is driven by a favorable enthalpic change. However, if the membrane is composed of a mixture of both lipids, this process is driven by a favorable entropic change. In the lipid bilayer containing DPPS, the glyphosate was found to penetrate hydrated and coordinated with Na+ ions, in contrast to the pure zwitterionic lipid bilayer which penetrated only hydrated. This effect is independent of the concentration of sodium ions present in the bulk solution.

Surface charge density and fatty acids enhance the membrane permeation rate of CPP-cargo complexes

The CPP-effect makes reference to the process by which the membrane translocation rate of a cargo is enhanced by chemical functionalization with cell-penetrating peptides (CPPs). In this work we combine a simple kinetic model with free-energy calculations to explore the energetic basis of the CPP-effect. Two polyglicines are selected as model hydrophilic cargoes, and nona-arginine as a prototypical CPP. We assess the cargo carrying efficiency of nona-arginine by comparing the adsorption and insertion energies of the cargoes, the cargo-free CPPs, and the CPP-cargo complexes, into lipid membranes of varying composition. We also analyze the effect of modifying the type and concentration of anionic lipids, and the implication of these factors on the translocation rate of the CPP-cargo complex. Of particular interest is the evaluation of the catalytic role of palmitic acid (palmitate) as a promoter of the CPP-effect. We also analyse the influence of the size of the cargo on the membrane adsorption and insertion energies. Our results show that the efficiency of nona-arginine as a transmembrane carrier of simple hydrophilic molecules is modulated by the size of the cargo, and is strongly enhanced by increasing the concentration of anionic lipids and of ionized fatty acids in the membrane.

Statin-boosted cellular uptake of penetratin due to reduced membrane dipole potential.. [DOI: 10.1101/2020.08.04.236984]

Since cell penetrating peptides are promising tools for delivery of cargo into cells, factors limiting or facilitating their cellular uptake are intensely studied. Using labeling with pH-insensitive and pH-sensitive dyes we report that escape of penetratin from acidic endo-lysosomal compartments is retarded compared to its cellular uptake. The membrane dipole potential, known to alter transmembrane transport of charged molecules, is shown to be negatively correlated with the concentration of penetratin in the cytoplasmic compartment. Treatment of cells with therapeutically relevant concentrations of atorvastatin, an inhibitor of HMG-CoA reductase and cholesterol synthesis, significantly increased the release of penetratin from acidic endocytic compartments in two different cell types. This effect of atorvastatin correlated with its ability to decrease the membrane dipole potential. These results highlight the importance of the dipole potential in regulating cellular uptake of cell penetrating peptides and suggest a clinically relevant way of boosting this process.

Thermodynamics of cell penetrating peptides on lipid membranes: sequence and membrane acidity regulate surface binding

Acidic lipids respond to pH in ways that fully promote or deplete the surface accumulation of cell penetrating peptides.

Interaction of a Polyarginine Peptide with Membranes of Different Mechanical Properties

The membrane translocation efficiency of cell penetrating peptides (CPPs) has been largely studied, and poly-arginines have been highlighted as particularly active CPPs, especially upon negatively charged membranes. Here we inquire about the influence of membrane mechanical properties in poly-arginine adsorption, penetration and translocation, as well as the subsequent effect on the host membrane. For this, we selected anionic membranes exhibiting different rigidity and fluidity, and exposed them to the nona-arginine KR₉C. Three different membrane compositions were investigated, all of them having 50% of the anionic lipid 1,2-dioleoyl-sn-glycero-3-phospho-(1’-rac-glycerol) (DOPG), thus, ensuring a high affinity of the peptide for membrane surfaces. The remaining 50% was a saturated PC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine, DPPC), an unsaturated PC (1,2-dioleoyl-sn-glycero-3-phosphocholine, DOPC) or a mixture of DOPC with cholesterol. Peptide-membrane interactions were studied using four complementary models for membranes: Langmuir monolayers, Large Unilamellar Vesicles, Black Lipid Membranes and Giant Unilamellar Vesicles. The patterns of interaction of KR₉C varied within the different membrane compositions. The peptide strongly adsorbed on membranes with cholesterol, but did not incorporate or translocate them. KR₉C stabilized phase segregation in DPPC/DOPG films and promoted vesicle rupture. DOPC/DOPG appeared like the better host for peptide translocation: KR₉C adsorbed, inserted and translocated these membranes without breaking them, despite softening was observed.

Molecular mechanism of HIV-1 TAT peptide and its conjugated gold nanoparticles translocating across lipid membranes

The trans-acting activator of transcription (TAT) peptide, which is derived from human immunodeficiency virus-1 (HIV-1), has been widely used as an effective nanocarrier to transport extracellular substances into cells. However, the underlying translocation mechanism of TAT peptide across cell membranes still remains controversial. Besides, the molecular process of TAT peptide facilitating the transport of extracellular substances into cells is largely unknown. In this study, we explore the interactions of TAT peptides and their conjugated gold nanoparticles with lipid membranes by coarse-grained molecular dynamics simulations. It is found that the TAT peptides can hardly penetrate through the membrane at low peptide concentrations; after the concentration increases to a threshold value, they can cross the membrane through an induced nanopore due to the transmembrane electrostatic potential difference. The translocation of TAT peptides is mainly caused by the overall structural changes of membranes. Furthermore, we demonstrate that the translocation of gold nanoparticles (AuNPs) across the membrane is significantly affected by the number of grafted TAT peptides on the particle surface. The transmembrane efficiency of AuNPs may even be reduced when a small number of peptides modify them; whereas, when the number of grafted peptides increases to a certain value, the TAT-AuNP complex can translocate across the membrane in a pore-mediated way. Based on our findings, an effective strategy has been proposed to enhance the delivery efficiency of AuNPs. The present study can improve our understanding of the interactions between TAT peptides and cell membranes; it may also give some insightful suggestions on the design and development of nanocarriers with high efficiency for the delivery of nanoparticles and drugs.

Adsorption and insertion of polyarginine peptides into membrane pores: The trade-off between electrostatics, acid-base chemistry and pore formation energy

The mechanism that arginine-rich cell penetrating peptides (ARCPPs) use to translocate lipid membranes is not entirely understood. In the present work, we develop a molecular theory that allows to investigate the adsorption and insertion of ARCPPs on membranes bearing hydrophilic pores. This method accounts for size, shape, conformation, protonation state and charge distribution of the peptides; it also describes the state of protonation of acidic membrane lipids. We present a systematic investigation of the effect of pore size, peptide concentration and sequence length on the extent of peptide adsorption and insertion into the pores. We show that adsorption on the intact (non-porated) lipid membrane plays a key role on peptide translocation. For peptides shorter than nona-arginine, adsorption on the intact membrane increases significantly with chain length, but it saturates for longer peptides. However, this adsorption behavior only occurs at relatively low peptide concentrations; increasing peptide concentration favors adsorption of the shorter molecules. Adsorption of longer peptides increases the intact membrane negative charge as a result of further deprotonation of acidic lipids. Peptide insertion into the pores depends non-monotonically on pore radius, which reflects the short range nature of the effective membrane-peptide interactions. The size of the pore that promotes maximum adsorption depends on the peptide chain length. Peptide translocation is a thermally activated process, so we complement our thermodynamic approach with a simple kinetic model that allows to rationalize the ARCPPs translocation rate in terms of the free energy gain of adsorption, and the energy cost of creating a transmembrane pore with peptides in it. Our results indicate that strategies to improve translocation efficiency should focus on enhancing peptide adsorption.

Molecular Dynamics Simulations of Membrane Permeability

This Review illustrates the evaluation of permeability of lipid membranes from molecular dynamics (MD) simulation primarily using water and oxygen as examples. Membrane entrance, translocation, and exit of these simple permeants (one hydrophilic and one hydrophobic) can be simulated by conventional MD, and permeabilities can be evaluated directly by Fick's First Law, transition rates, and a global Bayesian analysis of the inhomogeneous solubility-diffusion model. The assorted results, many of which are applicable to simulations of nonbiological membranes, highlight the limitations of the homogeneous solubility diffusion model; support the utility of inhomogeneous solubility diffusion and compartmental models; underscore the need for comparison with experiment for both simple solvent systems (such as water/hexadecane) and well-characterized membranes; and demonstrate the need for microsecond simulations for even simple permeants like water and oxygen. Undulations, subdiffusion, fractional viscosity dependence, periodic boundary conditions, and recent developments in the field are also discussed. Last, while enhanced sampling methods and increasingly sophisticated treatments of diffusion add substantially to the repertoire of simulation-based approaches, they do not address directly the critical need for force fields with polarizability and multipoles, and constant pH methods.

Negative Dipole Potentials and Carboxylic Polar Head Groups Foster the Insertion of Cell-Penetrating Peptides into Lipid Monolayers

Cell-penetrating peptides (CPPs) are polycationic sequences of amino acids recognized as some of the most effective vehicles for delivering membrane-impermeable cargos into cells. CPPs can traverse cell membranes by direct translocation, and assessing the role of lipids on the membrane permeation process is important to convene a complete model of the CPP translocation. In this work, we focus on the biophysical basis of peptide-fatty acid interactions, analyzing how the acid-base and electrostatic properties of the lipids determine the CPP adsorption and incorporation into a Langmuir monolayer, focusing thus on the first two stages of the direct translocation mechanism. We sense the binding and insertion of the peptide into the lipid structure by measuring the changes in the surface pressure, the surface potential, and the reflectivity of the interface. We show that, beyond the presence of anionic moieties, negative dipole potentials and carboxylic polar head groups significantly promote the insertion of the peptide into the monolayer. On the basis of our results, we propose the appearance of stable CPP-lipid complexes whose kinetics of formation depends on the length of the lipids' hydrocarbon chains.