Reactivity and Recyclability of Ligand-Protected Metal Cluster Catalysts for CO2 Transformation

It remains a significant challenge to construct an integrated catalyst that combines advantages of homogeneous and heterogeneous catalysis with clarified mechanism and high performance. Here we show atomically precise CuAg cluster catalysts for CO₂ capture and utilization, where two functional units are combined into the clusters: metal and ligand. Due to atomic resolution on total and local structures of such catalysts to be achieved, which disentangles heterogeneous imprecise systems and permits tracing the reaction processes via experiments coupled with theory, site-specific catalysis induced by metal-ligand synergy can be accurately elucidated. The CuAg cluster catalysts exhibit excellent reactivity and recyclability to forge the C-N bonding from CO₂ formylation with secondary amines that can make the cluster catalysts more unique compared with typically homogeneous complexes.

Highly selective addition of cyclosilanes to alkynes enabling new conjugated materials

Hybrid σ,π-conjugated cyclosilanes were synthesized via highly selective hydrosilylation and have shown great potentials as building blocks to construct novel conjugated polymers with control of tacticity.

A thermolytic route to a polysilyne

We report a safe and convenient method to prepare a new class of network polysilane, or polysilyne ([RSi]_n). Simple thermolysis of a readily accessible linear poly(phenylsilane), [PhSiH]_n, affords polysilyne [PhSi]_n with concomitant evolution of monosilanes. This new polymer shows a hyperbranched structure with unique features not observed in known polysilynes prepared via hazardous Wurtz coupling routes. Despite these differences, our soluble, yellow polysilyne exhibits some important properties associated with the traditional random network structure: it absorbs up to 400 nm in the UV spectrum, yet is stable to photolysis under inert atmosphere. This efficient new synthetic route opens the door to exciting applications for these hyperbranched polymers in materials and device technologies.

Headspace solid-phase microextraction of semi-volatile ultraviolet filters based on a superhydrophobic metal-organic framework stable in high-temperature steam

Headspace solid-phase microextraction (HS-SPME) of low volatile analytes from complex aqueous samples can be substantially facilitated by elevating the temperature of the samples. However, many SPME coatings prepared from novel sorptive materials may suffer from low stabilities in hot water steam. Herein, a superhydrophobic metal-organic framework (MOF) derived from decorating the metal-oxo nodes of the amino-functionalized UiO-66(Zr) with phenylsilane was prepared and successfully developed into a novel SPME fiber coating. The highest extraction efficiencies towards the semi-volatile ultraviolet (UV) filters were achieved when the aqueous samples were heated up to 100 °C. It was notable that the lab-made coating exhibited extraordinary stability towards hot water steam, probably because the hydrophobic groups capped on the MOF prevented water molecules from entering and deconstructing its lattice. Even after being treated with water steam under 100 °C for 21 h, the extraction performance of the coating remained unchanged, and the crystal structure of the MOF maintained. Furthermore, a negligible matrix effect was observed even in the samples containing humic acid. Under the optimal extraction and thermal desorption conditions, a method for determining UV filters in aqueous samples was established, which possessed low detection limits (0.6-2.1 ng L^-1), wide linear ranges (10-50000 ng L^-1), good inter-fiber reproducibility (2.3-6.0%, n = 6), and satisfying intra-fiber repeatability (1.8-5.8%, n = 3). The method was successfully applied in quantifying UV filters in environmental water samples. In addition, the lab-made NH₂-UiO-66(Zr)-shp-coated fiber was also suitable for the analysis of polycyclic aromatic hydrocarbons (PAHs). This study provided an effective strategy for preparing MOF coatings that can maintain their crystalline structures and high extraction performances in high-temperature steam.

Heavier Alkaline-Earth Catalyzed Dehydrocoupling of Silanes and Alcohols for the Synthesis of Metallo-Polysilylethers

The dehydrocoupling of silanes and alcohols mediated by heavier alkaline-earth catalysts, [Ae{N(SiMe₃ )₂ }₂ ⋅(THF)₂ ] (I-III) and [Ae{CH(SiMe₃ )₂ }₂ ⋅(THF)₂ ], (IV-VI) (Ae=Ca, Sr, Ba) is described. Primary, secondary, and tertiary alcohols were coupled to phenylsilane or diphenylsilane, whereas tertiary silanes are less tolerant towards bulky substrates. Some control over reaction selectivity towards mono-, di-, or tri-substituted silylether products was achieved through alteration of reaction stoichiometry, conditions, and catalyst. The ferrocenyl silylether, FeCp(C₅ H₄ SiPh(OBn)₂ ) (2), was prepared and fully characterized from the ferrocenylsilane, FeCp(C₅ H₄ SiPhH₂ ) (1), and benzyl alcohol using barium catalysis. Stoichiometric experiments suggested a reaction manifold involving the formation of Ae-alkoxide and hydride species, and a series of dimeric Ae-alkoxides [(Ph₃ CO)Ae(μ₂ -OCPh₃ )Ae(THF)] (3 a-c, Ae=Ca, Sr, Ba) were isolated and fully characterized. Mechanistic experiments suggested a complex reaction mechanism involving dimeric or polynuclear active species, whose kinetics are highly dependent on variables such as the identity and concentration of the precatalyst, silane, and alcohol. Turnover frequencies increase on descending Group 2 of the periodic table, with the barium precatalyst III displaying an apparent first-order dependence in both silane and alcohol, and an optimum catalyst loading of 3 mol % Ba, above which activity decreases. With precatalyst III in THF, ferrocene-containing poly- and oligosilylethers with ferrocene pendent to- (P1-P4) or as a constituent (P5, P6) of the main polymer chain were prepared from 1 or Fe(C₅ H₄ SiPhH₂ )₂ (4) with diols 1,4-(HOCH₂ )₂ -(C₆ H₄ ) and 1,4-(CH(CH₃ )OH)₂ -(C₆ H₄ ), respectively. The resultant materials were characterized by NMR spectroscopy, gel permeation chromatography (GPC) and DOSY NMR spectroscopy, with estimated molecular weights in excess of 20,000 Da for P1 and P4. The iron centers display reversible redox behavior and thermal analysis showed P1 and P5 to be promising precursors to magnetic ceramic materials.

Stereocontrolled Syntheses of Functionalized cis- and trans-Siladecalins

We report the synthesis of both diastereomers of an all-silicon analog of decalin. Carbocyclic decalin is a ubiquitous bicyclic structural motif. The siladecalin synthesis provides materials functionalized with either Si-Ph or Si-H groups, versatile entry points for further chemical diversification. The synthesis of silicon-stereogenic silanes is significantly less precedented than the synthesis of asymmetric carbon centers, and strategies for control of relative stereochemistry in oligosilanes are hardly described. This study offers insights of potential generality, such as the epimerization of the cis-isomer to the thermodynamically downhill trans-isomer via a hypothesized pentavalent intermediate. Decalin is a classic example in the conformational analysis of organic ring systems, and the carbocyclic diastereomers have highly divergent conformational profiles. Like the carbocycle, we observe different conformational properties in cis- and trans-siladecalins with consequences for NMR spectroscopy, optical properties, and vibrational spectroscopy. This study showcases the utility of targeted synthesis for preparing complex and functionalized polycyclic silanes.

Photolytic, radical-mediated hydrophosphination: a convenient post-polymerisation modification route to P-di(organosubstituted) polyphosphinoboranes [RR'PBH2] n

Polymers with a phosphorus-boron main chain have attracted interest as novel inorganic materials with potentially useful properties since the 1950s. Although examples have recently been shown to be accessible via several routes, the materials reported so far have been limited to P-mono(organosubstituted) materials, [RHPBH2] n , containing P-H groups. Here we report a general route for the post-polymerisation modification of such polyphosphinoboranes giving access to a large range of previously unknown examples featuring P-disubstituted units. Insertion of alkenes, R'CH[double bond, length as m-dash]CH2 into the P-H bonds of poly(phenylphosphinoborane), [PhHPBH2] n was facilitated by irradiation under UV light in the presence of the photoinitiator 2,2-dimethoxy-2-phenylacetophenone (DMPAP) and (2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPO) under benchtop conditions giving high molar mass, air-stable polymers [PhR'PBH2] n with controlled functionalisation and tunable material properties. The mechanistic explanation for the favourable effect of the addition of TEMPO was also investigated and was proposed to be a consequence of reversible binding to radical species formed from the photolysis of DMPAP. This new methodology was also extended to the formation of crosslinked gels and to water-soluble bottlebrush copolymers showcasing applicability to form a wide range of polyphosphinoborane-based soft materials with tunable properties.

Pore-Surface Engineering by Decorating Metal-Oxo Nodes with Phenylsilane to Give Versatile Super-Hydrophobic Metal-Organic Frameworks (MOFs)

Hydrophobization of metal-organic frameworks (MOFs) is important to push forward their practical use and thus has attracted increasing interest. In contrast to the previous reports, which mainly focused on the modification of organic ligands in MOFs, herein, we reported a novel strategy to decorate the metal-oxo nodes of MOFs with phenylsilane to afford super-hydrophobic NH₂ -UiO-66(Zr), which shows highly improved base resistance and holds great promise in versatile applications, such as organic/water separation, self-cleaning, and liquid-marble fabrication. This work demonstrates the first attempt at metal-oxo node modification for super-hydrophobic MOFs, advancing a new concept in the design of MOFs with controlled wettability for practical applications.

A Highly Effective Route to Si-O-Si Moieties through O-Silylation of Silanols and Polyhedral Oligomeric Silsesquioxane Silanols with Disilazanes

A simple and highly practical catalyst-free O-silylation of silanols with commercially available disilazanes has been developed under mild conditions. In the case of polyhedral oligomeric silsesquioxane (POSS) silanols and some other silanols, it was necessary to use catalytic amounts of inexpensive Bi(OTf)₃ as additional catalyst. This efficient chlorine-free protocol involves the synthesis of a wide range of important organosilicon derivatives such as unsymmetrical disiloxanes and functionalized silsesquioxanes.