Novel PVA-Hyaluronan-Siloxane Hybrid Nanofiber Mats for Bone Tissue Engineering

Hyaluronan (HA) is a natural biodegradable biopolymer; its biological functions include cell adhesion, cell proliferation, and differentiation as well as decreasing inflammation, angiogenesis, and regeneration of damaged tissue. This makes it a suitable candidate for fabricating nanomaterials with potential use in tissue engineering. However, HA nanofiber production is restricted due to the high viscosity, low evaporation rate, and high surface tension of HA solutions. Here, hybrids in the form of continuous and randomly aligned polyvinyl alcohol (PVA)-(HA)-siloxane nanofibers were obtained using an electrospinning process. PVA-HA fibers were crosslinked by a 3D siloxane organic-inorganic matrix via sol-gel that restricts natural hydrophilicity and stiffens the structure. The hybrid nanofiber mats were characterized by FT-IR, micro-Raman spectroscopy, SEM, and biological properties. The PVA/HA ratio influenced the morphology of the hybrid nanofibers. Nanofibers with high PVA content (10PVA-8 and 10PVA-10) form mats with few beaded nanofibers, while those with high HA content (5PVA-8 and 5PVA-10) exhibit mats with mound patterns formed by "ribbon-like" nanofibers. The hybrid nanofibers were used as mats to support osteoblast growth, and they showed outstanding biological properties supporting cell adhesion, cell proliferation, and cell differentiation. Importantly, the 5PVA-8 mats show 3D spherical osteoblast morphology; this suggests the formation of tissue growth. These novel HA-based nanomaterials represent a relevant advance in designing nanofibers with unique properties for potential tissue regeneration.

Siloxane Emissions and Exposures during the Use of Hair Care Products in Buildings

Cyclic volatile methyl siloxanes (cVMS) are ubiquitous in hair care products (HCPs). cVMS emissions from HCPs are of concern, given the potential adverse impact of siloxanes on the environment and human health. To characterize cVMS emissions and exposures during the use of HCPs, realistic hair care experiments were conducted in a residential building. Siloxane-based HCPs were tested using common hair styling techniques, including straightening, curling, waving, and oiling. VOC concentrations were measured via proton-transfer-reaction time-of-flight mass spectrometry. HCP use drove rapid changes in the chemical composition of the indoor atmosphere. cVMS dominated VOC emissions from HCP use, and decamethylcyclopentasiloxane (D5) contributed the most to cVMS emissions. cVMS emission factors (EFs) during hair care routines ranged from 110-1500 mg/person and were influenced by HCP type, styling tools, operation temperatures, and hair length. The high temperature of styling tools and the high surface area of hair enhanced VOC emissions. Increasing the hair straightener temperature from room temperature to 210 °C increased cVMS EFs by 50-310%. Elevated indoor cVMS concentrations can result in substantial indoor-to-outdoor transport of cVMS via ventilation (0.4-6 tons D5/year in the U.S.); thus, hair care routines may augment the abundance of cVMS in the outdoor atmosphere.

Engineering of Siloxanes for Stabilizing Silicon Anode Materials

Silicon (Si) is considered the most promising anode material for the next generation of lithium-ion batteries (LIBs) because of its high theoretical specific capacity and abundant reserves. However, the volume expansion of silicon in the cycling process causes the destruction of the electrode structure and irreversible capacity loss. As a result, the commercial application of silicon materials is greatly hindered. In recent years, siloxane-based organosilicon materials have been widely used in silicon anode of LIBs because of their unique structure and physical and chemical properties, and have shown excellent electrochemical properties. The comprehensive achievement of siloxanes in silicon-based LIBs can be understood better through a systematic summary, which is necessary to guide the design of electrodes and achieve better electrochemical performance. This paper systematically introduces the unique advantages of siloxane materials in electrode, surface/interface modification, binder, and electrolyte. The challenges and future directions for siloxane materials are presented to enhance their performance and expand their application in silicon-based LIBs.

Quantitative Simulations of Siloxane Adsorption in Metal-Organic Frameworks

We present a transferable force field (FF) for simulating the bulk properties of linear and cyclic siloxanes and the adsorption of these species in metal-organic frameworks (MOFs). Unlike previous FFs for siloxanes, our FF accurately reproduces the vapor-liquid equilibria of each species in the bulk phase. The quality of our FF combined with the Universal Force Field using standard Lorentz-Berthelot combining rules for MOF atoms was assessed in a wide range of MOFs without open metal sites, showing good agreement with dispersion-corrected density functional theory calculations. Predictions with this FF show good agreement with the limited experimental data for siloxane adsorption in MOFs that is available. As an example of using the FF to predict adsorption properties in MOFs, we present simulations examining entropy effects in binary linear and cyclic siloxane mixture coadsorption in the large-pore MOF with structure code FOTNIN.

Direct Optical Patterning of Quantum Dots: One Strategy, Different Chemical Processes

Patterning, stability, and dispersion of the semiconductor quantum dots (scQDs) are three issues strictly interconnected for successful device manufacturing. Recently, several authors adopted direct optical patterning (DOP) as a step forward in photolithography to position the scQDs in a selected area. However, the chemistry behind the stability, dispersion, and patterning has to be carefully integrated to obtain a functional commercial device. This review describes different chemical strategies suitable to stabilize the scQDs both at a single level and as an ensemble. Special attention is paid to those strategies compatible with direct optical patterning (DOP). With the same purpose, the scQDs' dispersion in a matrix was described in terms of the scQD surface ligands' interactions with the matrix itself. The chemical processes behind the DOP are illustrated and discussed for five different approaches, all together considering stability, dispersion, and the patterning itself of the scQDs.

Viscoelastic Properties of Human Facial Skin and Comparisons with Facial Prosthetic Elastomers

Prosthesis discomfort and a lack of skin-like quality is a source of patient dissatisfaction with facial prostheses. To engineer skin-like replacements, knowledge of the differences between facial skin properties and those for prosthetic materials is essential. This project measured six viscoelastic properties (percent laxity, stiffness, elastic deformation, creep, absorbed energy, and percent elasticity) at six facial locations with a suction device in a human adult population equally stratified for age, sex, and race. The same properties were measured for eight facial prosthetic elastomers currently available for clinical usage. The results showed that the prosthetic materials were 1.8 to 6.4 times higher in stiffness, 2 to 4 times lower in absorbed energy, and 2.75 to 9 times lower in viscous creep than facial skin (p < 0.001). Clustering analyses determined that facial skin properties fell into three groups-those associated with body of ear, cheek, and remaining locations. This provides baseline information for designing future replacements for missing facial tissues.

Dissolved Methane Recovery and Trace Contaminant Fate Following Mainstream Anaerobic Treatment of Municipal Wastewater

Anaerobic treatment of municipal wastewater with the staged anaerobic fluidized bed membrane bioreactor (SAF-MBR) shows promise to transform secondary wastewater treatment into an energy-positive process. However, the dissolved methane in SAF-MBR effluent needs to be recovered to reach net energy positive. To recover this methane for energy generation, an air stripping system was constructed downstream of a pilot-scale SAF-MBR facility and operated for over 80 days. The process removed 98% of effluent dissolved methane, and with the addition of intermittent disinfection recovered an average of 90% of the dissolved methane. The exit gas from air-stripping comprised 1.5-2.5% methane and could be utilized by blending with biogas produced from primary solids digestion and the SAF-MBR in an on-site combustion process. The direct energy costs for air stripping methane are <1% of the energy recoverable from the dissolved methane, not accounting for siloxane or sulfide scrubbing. Only siloxanes were observed at levels impacting combustion in this study, with 1.6 mg Si/m³ present in the blended biogas and air stripping mixture. The fate of a subset of trace organic contaminants was examined across the air stripping unit to check for aerobic degradation by methanotrophs or other opportunistic aerobes. Only 1,4-dioxane and benzotriazole showed statistically significant removal among 17 compounds screened, with 0.53 ± 0.13 and 0.34 ± 0.15 fraction removal, respectively. Our results indicate that air stripping is an energy efficient and robust technology for dissolved methane removal and onsite utilization for heat and electricity generation from anaerobic treatment of municipal wastewater.

A Fusion of Molecular Imprinting Technology and Siloxane Chemistry: A Way to Advanced Hybrid Nanomaterials

Molecular imprinting technology is a well-known strategy to synthesize materials with a predetermined specificity. For fifty years, the "classical" approach assumed the creation of "memory sites" in the organic polymer matrix by a template molecule that interacts with the functional monomer prior to the polymerization and template removal. However, the phenomenon of a material's "memory" provided by the "footprint" of the chemical entity was first observed on silica-based materials nearly a century ago. Through the years, molecular imprinting technology has attracted the attention of many scientists. Different forms of molecularly imprinted materials, even on the nanoscale, were elaborated, predominantly using organic polymers to induce the "memory". This field has expanded quickly in recent years, providing versatile tools for the separation or detection of numerous chemical compounds or even macromolecules. In this review, we would like to emphasize the role of the molecular imprinting process in the formation of highly specific siloxane-based nanomaterials. The distinct chemistry of siloxanes provides an opportunity for the facile functionalization of the surfaces of nanomaterials, enabling us to introduce additional properties and providing a way for vast applications such as detectors or separators. It also allows for catalyzing chemical reactions providing microreactors to facilitate organic synthesis. Finally, it determines the properties of siloxanes such as biocompatibility, which opens the way to applications in drug delivery and nanomedicine. Thus, a brief outlook on the chemistry of siloxanes prior to the discussion of the current state of the art of siloxane-based imprinted nanomaterials will be provided. Those aspects will be presented in the context of practical applications in various areas of chemistry and medicine. Finally, a brief outlook of future perspectives for the field will be pointed out.

Autoimmune/inflammatory syndrome induced by adjuvants (ASIA), medical treatment of severe systemic compromise: case report

Case description

A 42-year-old woman with severe pulmonary and mediastinal inflammatory involvement, secondary to infiltration of a silicone-related allogenic material with systemic migration.

Clinical findings

The patient developed esophageal and bronchial stenosis, recurrent infections, malnutrition, and respiratory deterioration, making surgical removal of the allogenic material impossible.

Treatment and outcome

Clinical and radiological improvement was achieved after treatment with multiple intravenous and oral immunomodulators.

Clinical relevance

Autoimmune/inflammatory syndrome induced by adjuvants (ASIA) is a heterogeneous disease resulting from exposure to allogenic substances in a susceptible subject. These substances cause autoimmune or autoinflammatory phenomena. Since ASIA was described ten years ago, its diagnostic criteria are still under discussion, with an uncertain prognosis. The ideal therapy is based on eliminating the causative substance, but this is not always possible. Therefore, it is necessary to start an immunomodulatory treatment, using it in this patient, a scheme that had not been previously reported in the literature.

Silicone in Dermatology: An Update

Silicones aka siloxanes are synthetic compounds, which contain siloxane bonds, i.e., the repeat unit -Si-O- with organic side groups such as methyl, ethyl, propyl, phenyl, fluoroalkyl, aminoalkyl, hydroxy, mercapto, hydrogen, and vinyl attached to the silicon atoms. They have ability to create short, long, or complex organosilicone oligomer and polymer particles. The siloxane bond in silicone is very strong and highly stable with nontoxic, noncarcinogenic, and hypoallergic properties. Silicone compounds have become one of the key ingredients in various skin care products namely moisturizers, sunscreen, color cosmetics, hair shampoos, etc. This review focuses on an update on various indications of silicone in dermatology. For this review, the literature search was conducted using keywords such as silicone and role of silicone.

Polyborosiloxanes (PBS): Evolution of Approaches to the Synthesis and the Prospects of Their Application

The mini-review deals with borosiloxanes as a class of organoelement compounds that comprise Si-O-B bonds, including individual compounds and polymeric structures. The borosiloxanes first synthesized in the 1950s using simple methods demonstrated very unusual properties but were hydrolytically unstable. However, in recent times, synthetic methods have changed significantly, which made it possible to synthesize borosiloxanes that are resistant to external factors, including atmospheric moisture. Borosiloxanes became important due to their unique properties. For example, borosiloxane liquids acquire a thixotropic behavior due to donor-acceptor interchain interactions. In addition, borosiloxanes are used to produce flame-retardant ceramics. An analysis of the literature sources shows that no review has yet been completed on the topic of borosiloxanes. Therefore, we decided that even a brief outlook of this area would be useful for researchers in this and related fields. Thus, the review shows the evolution of the synthesis methods and covers the studies on the properties of these unique molecules, the latest achievements in this field, and the prospects for their application.

Synthesis of Carbosilane and Carbosilane-Siloxane Dendrons Based on Limonene

In this work, carbosilane dendrons of the first, second, and third generations were obtained on the basis of a natural terpenoid, limonene. Previously, we have shown the possibility of selective hydrosilylation and hydrothiolation of limonene. It is proved that during hydrosilylation, only the isoprenyl double bond reacts, while the cyclohexene double bond does not undergo into the hydrosilylation reaction. However, the cyclohexene double bond reacts by hydrothiolation. This selectivity makes it possible to use limonene as a dendron growth center, while maintaining a useful function—a double bond at the focal point. Thus, the sequence of hydrosilylation and Grignard reactions based on limonene formed carbosilane dendrons. After that, the end groups were blocked by heptamethyltrisiloxane or butyllithium. The obtained substances were characterized using NMR spectroscopy, elemental analysis and GPC. Thus, the proposed methodology for the synthesis of carbosilane dendrons based on the natural terpenoid limonene opens up wide possibilities for obtaining various macromolecules: dendrimers, Janus dendrimers, dendronized polymers, and macroinitiators.

Microalgal Cultures for the Bioremediation of Urban Wastewaters in the Presence of Siloxanes

Microalgae are widely used in the bioremediation of wastewaters due to their efficient removal of pollutants such as nitrogen, phosphorus, and contaminants of emerging concern (CECs). Siloxanes are CECs that reach wastewater treatment plants (WWTPs), leading to the production of biogas enriched with these compounds, associated with the breakdown of cogeneration equipment. The biological removal of siloxanes from wastewaters could be a sustainable alternative to the costly existing technologies, but no investigation has been performed using microalgal cultures for this purpose. This study evaluated the ability of Chlorella vulgaris to bioremediate primary (PE) and secondary (SE) urban effluents and remove volatile methylsiloxanes (VMSs). C. vulgaris grew successfully in both effluents, and approximately 86% of nitrogen and 80% of phosphorus were efficiently removed from the PE, while 52% of nitrogen and 87% of phosphorus were removed from the SE, and the presence of VMSs does not seem to have a negative influence on nutrient removal. Three out of the seven of the analysed VMSs were detected in the microalgal biomass at the end of the PE assay. However, dodecamethylcyclohexasiloxane (D6) was the one that accumulated to a greater extent, since 48% of the initial mass of D6 was detected in the biomass samples. D6 is one of the most lipophilic VMSs, which might contribute to the higher adsorption onto the surface of microalgae. Overall, the results indicate C. vulgaris’ potential to remove specific VMSs from effluents.

Molecular Scissors for Tailor-Made Modification of Siloxane Scaffolds

The controlled design of functional oligosiloxanes is an important topic in current research. A consecutive Si−O−Si bond cleavage/formation using siloxanes that are substituted with 1,2‐diaminobenzene derivatives acting as molecular scissors is presented. The method allows to cut at certain positions of a siloxane scaffold forming a cyclic diaminosilane or ‐siloxane intermediate and then to introduce new functional siloxy units. The procedure could be extended to a direct one‐step cleavage of chlorooligosiloxanes. Both siloxane formation and cleavage proceed with good to excellent yields, high regioselectivity, and great variability of the siloxy units. Control of the selectivity is achieved by the choice of the amino substituent. Insight into the mechanism was provided by low temperature NMR studies and the isolation of a lithiated intermediate.

Tuning the 3D Printability and Thermomechanical Properties of Radiation Shields

Additive manufacturing, with its rapid advances in materials science, allows for researchers and companies to have the ability to create novel formulations and final parts that would have been difficult or near impossible to fabricate with traditional manufacturing methods. One such 3D printing technology, direct ink writing, is especially advantageous in fields requiring customizable parts with high amounts of functional fillers. Nuclear technology is a prime example of a field that necessitates new material design with regard to unique parts that also provide radiation shielding. Indeed, much effort has been focused on developing new rigid radiation shielding components, but DIW remains a less explored technology with a lot of potential for nuclear applications. In this study, DIW formulations that can behave as radiation shields were developed and were printed with varying amounts of porosity to tune the thermomechanical performance.

New Carvone-Based Deep Eutectic Solvents for Siloxanes Capture from Biogas

During biogas combustion, siloxanes form deposits of SiO₂ on engine components, thus shortening the lifespan of the installation. Therefore, the development of new methods for the purification of biogas is receiving increasing attention. One of the most effective methods is physical absorption with the use of appropriate solvents. According to the principles of green engineering, solvents should be biodegradable, non-toxic, and have a high absorption capacity. Deep eutectic solvents (DES) possess such characteristics. In the literature, due to the very large number of DES combinations, conductor-like screening models for real solvents (COSMO-RS), based on the comparison of siloxane activity coefficient of 90 DESs of various types, were studied. DESs, which have the highest affinity to siloxanes, were synthesized. The most important physicochemical properties of DESs were carefully studied. In order to explain of the mechanism of DES formation, and the interaction between DES and siloxanes, the theoretical studies based on σ-profiles, and experimental studies including the ¹H NMR, ¹³C NMR, and FT-IR spectra, were applied. The obtained results indicated that the new DESs, which were composed of carvone and carboxylic acids, were characterized by the highest affinity to siloxanes. It was shown that the hydrogen bonds between the active ketone group (=O) and the carboxyl group (-COOH) determined the formation of stable DESs with a melting point much lower than those of the individual components. On the other hand, non-bonded interactions mainly determined the effective capture of siloxanes with DES.

Tris(pentafluoroethyl)silanol Derivatives and the Lewis Amphoteric Tris(pentafluoroethyl)silanolate Anion, [Si(C2 F5 )3 O]. Chemistry 2021;27:11041-11044. [PMID: 34061416 PMCID: PMC8453507 DOI: 10.1002/chem.202101845]

While alkyl‐substituted siloxanes are widely known, virtually nothing is known about perfluoroalkyl siloxanes and their congener species, the silanols and silanolates. We recently reported on the tris(pentafluoroethyl)silanide ion, [Si(C₂F₅)₃]⁻, which features Lewis amphoteric character deriving from the pentafluoroethyl substituents and their strong electron‐withdrawing properties. Transferring this knowledge, we investigated the Lewis amphoteric behavior of the tris(pentafluoroethyl)silanolate, [Si(C₂F₅)₃O]⁻. In order to examine such Lewis amphoteric behavior, we first developed a strategy for the synthesis of the corresponding silanol Si(C₂F₅)₃OH, which readily condenses at room temperature to the hexakis(pentafluoroethyl)disiloxane, (C₂F₅)₃SiOSi(C₂F₅)₃. Deprotonation of Si(C₂F₅)₃OH employing a sterically demanding phosphazene base allows the characterization of the first example of a dimeric triorganosilanolate: the dianionic hexakis(pentafluoroethyl)disilanolate, [{Si(C₂F₅)₃O}₂]²⁻, implies Lewis amphoteric character of the monomeric [Si(C₂F₅)₃O]⁻ anion.

Dynamic Covalent Bonds of Si-OR and Si-OSi Enabled A Stiff Polymer to Heal and Recycle at Room Temperature

As stiff polymers are difficult to self-heal, the balance between polymers' self-healing ability and mechanical properties is always a big challenge. Herein, we have developed a novel healable stiff polymer based on the Si-OR and Si-OSi dynamic covalent bonds. The self-healing mechanism was tested and proved by the small molecule model experiments and the contrast experiments of polymers. This polymer possesses excellent tensile, bending properties as well as room temperature self-healing abilities. Moreover, due to the sticky and shapeable properties under wetting conditions, the polymer could be used as an adhesive. Besides, even after four cycles of recycling, the polymer maintains its original properties, which meets the requirements of recyclable materials. It was demonstrated that the polymer exhibits potential application in some fields, such as recyclable materials and healable adhesives.

Siloxanes in Biogas: Approaches of Sampling Procedure and GC-MS Method Determination

A new approach of siloxane sampling based on impinger, micro-impinger, adsorption on active carbon, and direct TedlarBag methods followed by gas chromatography-mass spectrometry (GC-MS) was developed for the analysis of three linear (L2–L4) and four cyclic (D3–D5) volatile methyl siloxanes (VMSs). Three kinds of organic liquid-medium characterized by different polarities, namely acetone, methanol, and d-decane as siloxanes trap were arranged in the experiment which is widely discussed below. Thus, the GC-MS equipped with SUPELCOWAX-10 capillary column was employed to perform monitoring of VMS content in the analyzed biogas samples originating from landfill, wastewater treatment plants, and agriculture biogas plants. In all samples that have undergone the analysis, cyclic and linear VMSs were found in quantities exceeding 107.9 and 3.8 mg/m³, respectively. Significant differences between siloxanes concentrations depending on biogas origin were observed. Moreover, the high range of linearity (0.1 to 70.06 mg/m³), low LoD (0.01 mg/m³), low LoQ (0.04 mg/m³), and high recovery (244.1%) indicate that the procedure and can be applied in sensitive analyses of silica biogas contaminants. In addition to the above, the impinger method of sampling performed better than active-carbon Tube and TedlarBag, particularly for quantifying low concentrations of siloxanes. Overall, the evaluation of sampling methods for biogas collection simplified the analytical procedure by reducing the procedural steps, avoiding the use of solvents, as well as demonstrated its applicability for the testing of biogas quality.

Removal of Siloxanes from Model Biogas by Means of Deep Eutectic Solvents in Absorption Process

The paper presents the screening of 20 deep eutectic solvents (DESs) composed of tetrapropylammonium bromide (TPABr) and glycols in various molar ratios, and 6 conventional solvents as absorbents for removal of siloxanes from model biogas stream. The screening was achieved using the conductor-like screening model for real solvents (COSMO-RS) based on the comparison of siloxane solubility in DESs. For the DES which was characterized by the highest solubility of siloxanes, studies of physicochemical properties, i.e., viscosity, density, and melting point, were performed. DES composed of tetrapropylammonium bromide (TPABr) and tetraethylene glycol (TEG) in a 1:3 molar ratio was used as an absorbent in experimental studies in which several parameters were optimized, i.e., the temperature, absorbent volume, and model biogas flow rate. The mechanism of siloxanes removal was evaluated by means of an experimental FT-IR analysis as well as by theoretical studies based on σ-profile and σ-potential. On the basis of the obtained results, it can be concluded that TPABr:TEG (1:3) is a very effective absorption solvent for the removal of siloxanes from model biogas, and the main driving force of the absorption process is the formation of the hydrogen bonds between DES and siloxanes.

Simplified speciation and atmospheric volatile organic compound emission rates from non-aerosol personal care products

Volatile organic compounds (VOCs) emitted from personal care products (PCPs) can affect indoor air quality and outdoor air quality when ventilated. In this paper, we determine a set of simplified VOC species profiles and emission rates for a range of non-aerosol PCPs. These have been constructed from individual vapor analysis from 36 products available in the UK, using equilibrium headspace analysis with selected-ion flow-tube mass spectrometry (SIFT-MS). A simplified speciation profile is created based on the observations, comprising four alcohols, two cyclic volatile siloxanes, and monoterpenes (grouped as limonene). Estimates are made for individual unit-of-activity VOC emissions for dose-usage of shampoos, shower gel, conditioner, liquid foundation, and moisturizer. We use these values as inputs to the INdoor air Detailed Chemical Model (INDCM) and compare results against real-world case-study experimental data. Activity-based emissions are then scaled based on plausible usage patterns to estimate the potential scale of annual per-person emissions for each product type (eg, 2 g limonene person-1  yr-1 from shower gels). Annual emissions from non-aerosol PCPs for the UK are then calculated (decamethylcyclopentasiloxane 0.25 ktonne yr-1 and limonene 0.15 ktonne yr-1 ) and these compared with the UK National Atmospheric Emissions Inventory estimates for non-aerosol cosmetics and toiletries.

Synthesis and Reactivity of the First Isolated Hydrogen-Bridged Silanol-Silanolate Anions

We report on the first examples of isolated silanol–silanolate anions, obtained by utilizing weakly coordinating phosphazenium counterions. The silanolate anions were synthesized from the recently published phosphazenium hydroxide hydrate salt with siloxanes. The silanol–silanolate anions are postulated intermediates in the hydroxide‐mediated polymerization of aryl and alkyl siloxanes. The silanolate anions are strong nucleophiles because of the weakly coordinating character of the phosphazenium cation, which is perceptible in their activity in polysiloxane depolymerization.

Calculation of the Isobaric Heat Capacities of the Liquid and Solid Phase of Organic Compounds at and around 298.15 K Based on Their "True" Molecular Volume

A universally applicable method for the prediction of the isobaric heat capacities of the liquid and solid phase of molecules at 298.15 K is presented, derived from their "true" volume. The molecules' "true" volume in A3 is calculated on the basis of their geometry-optimized structure and the Van-der-Waals radii of their constituting atoms by means of a fast numerical algorithm. Good linear correlations of the "true" volume of a large number of compounds encompassing all classes and sizes with their experimental liquid and solid heat capacities over a large range have been found, although noticeably distorted by intermolecular hydrogen-bond effects. To account for these effects, the total amount of 1303 compounds with known experimental liquid heat capacities has been subdivided into three subsets consisting of 1102 hydroxy-group-free compounds, 164 monoalcohols/monoacids, and 36 polyalcohols/polyacids. The standard deviations for Cp(liq,298) were 20.7 J/mol/K for the OH-free compunds, 22.91 J/mol/K for the monoalcohols/monoacids and 16.03 J/mol/K for the polyols/polyacids. Analogously, 797 compounds with known solid heat capacities have been separated into a subset of 555 OH-free compounds, 123 monoalcohols/monoacids and 119 polyols/polyacids. The standard deviations for Cp(sol,298) were calculated to 23.14 J/mol/K for the first, 21.62 J/mol/K for the second, and 19.75 J/mol/K for the last subset. A discussion of structural and intermolecular effects influencing the heat capacities as well as of some special classes, in particular hydrocarbons, ionic liquids, siloxanes and metallocenes, has been given. In addition, the present method has successfully been extended to enable the prediction of the temperature dependence of the solid and liquid heat capacities in the range between 250 and 350 K.

From As-Zincoarsasilene (LZn-As=SiL') to Arsaethynolato (As≡C-O) and Arsaketenylido (O=C=As) Zinc Complexes

The reactivity of the As-zincosilaarsene LZn-As=SiL' A (L=[CH(CMeNDipp)₂ ]^- , Dipp=2,6-ⁱ Pr₂ C₆ H₃ , L'=[{C(H)N(2,6-ⁱ Pr₂ -C₆ H₃ )}₂ ]^2- ) towards small molecules was investigated. Due to the pronounced zwitterionic character of the Si=As bond of A, it undergoes addition reactions with H₂ O and NH₃ , forming LZnAs(H)SiOH(L') 1 and LZnAs(H)SiNH₂ (L') 2. Oxygenation of A with N₂ O at -60 °C furnishes the deep blue 1,2-disiloxydiarsene, [LZnOSi(L')As]₂ 4, presumably via dimerization of the arsinidene intermediate LZnOSi(L')As 3. Oxygenation of A with CO₂ leads to the monomeric arsaethynolato siloxido zinc complex LZnOSi(L')(OC≡As) 5, essentially trapping the intermediary arsinidene 3 with liberated CO following initial oxidation of the Si=As bond. DFT calculations confirm the ambident coordination mode of the anionic [AsCO] ligand in solution, with the O-arsaethynolato [As≡C-O]^.- in 5, and the As-arsaketenylido ligand mode [O=C=As]^- present in LZnO-Si(L')(-As=C=O) 5' akin to the analogous phosphorus system, [PCO]^- .

A Highly Effective Route to Si-O-Si Moieties through O-Silylation of Silanols and Polyhedral Oligomeric Silsesquioxane Silanols with Disilazanes

A simple and highly practical catalyst-free O-silylation of silanols with commercially available disilazanes has been developed under mild conditions. In the case of polyhedral oligomeric silsesquioxane (POSS) silanols and some other silanols, it was necessary to use catalytic amounts of inexpensive Bi(OTf)₃ as additional catalyst. This efficient chlorine-free protocol involves the synthesis of a wide range of important organosilicon derivatives such as unsymmetrical disiloxanes and functionalized silsesquioxanes.

Synthesis of Polycyclic and Cage Siloxanes by Hydrolysis and Intramolecular Condensation of Alkoxysilylated Cyclosiloxanes

The controlled synthesis of oligosiloxanes with well-defined structures is important for the bottom-up design of siloxane-based nanomaterials. This work reports the synthesis of various polycyclic and cage siloxanes by the hydrolysis and intramolecular condensation of monocyclic tetra- and hexasiloxanes functionalized with various alkoxysilyl groups. An investigation of monoalkoxysilylated cyclosiloxanes revealed that intramolecular condensation occurred preferentially between adjacent alkoxysilyl groups to form new tetrasiloxane rings. The study of dialkoxy- and trialkoxysilylated cyclotetrasiloxanes revealed multistep intramolecular condensation reactions to form cubic octasiloxanes in relatively high yields. Unlike conventional methods starting from organosilane monomers, intramolecular condensation enables the introduction of different organic substituents in controlled arrangements. So-called Janus cubes have been successfully obtained, that is, Ph₄ R₄ Si₈ O₁₂ , in which R=Me, OSiMe₃ , and OSiMe₂ Vi (Vi=vinyl). These findings will enable the creation of siloxane-based materials with diverse functions.

Sequence-Controlled Catalytic One-Pot Synthesis of Siloxane Oligomers

Silicones are highly valuable poly- and oligomeric materials with a broad range of applications due to their outstanding physicochemical properties. The core framework of silicone materials consists of siloxane (Si-O-Si) bonds, and thus, the development of efficient siloxane-bond-forming reactions has attracted much attention. However, these reactions, especially "catalytic" siloxane-bond-forming reactions that enable the selective formation of unsymmetrical siloxane bonds, remain relatively underdeveloped. On the other hand, controlled iteration has become a powerful tool for the sequence-controlled synthesis of poly- and oligomeric compounds. Recently, control over the siloxane sequence has been achieved by the one-pot iteration of a B(C₆ F₅ )₃ -catalyzed dehydrocarbonative cross-coupling of alkoxysilanes with hydrosilanes and a B(C₆ F₅ )₃ -catalyzed hydrosilylation of carbonyl compounds. Thus, it is now possible to generate linear, branched, and cyclic sequence-specific oligosiloxanes in a highly selective manner under chloride-free conditions.

Covalency and Ionicity Do Not Oppose Each Other-Relationship Between Si-O Bond Character and Basicity of Siloxanes

Covalency and ionicity are orthogonal rather than antipodal concepts. We demonstrate for the case of siloxane systems [R₃ Si-(O-SiR₂ )_n -O-SiR₃ ] that both covalency and ionicity of the Si-O bonds impact on the basicity of the Si-O-Si linkage. The relationship between the siloxane basicity and the Si-O bond character has been under debate since previous studies have presented conflicting explanations. It has been shown with natural bond orbital methods that increased hyperconjugative interactions of LP(O)→σ*(Si-R) type, that is, increased orbital overlap and hence covalency, are responsible for the low siloxane basicity at large Si-O-Si angles. On the other hand, increased ionicity towards larger Si-O-Si angles has been revealed with real-space bonding indicators. To resolve this ostensible contradiction, we perform a complementary bonding analysis, which combines orbital-space, real-space, and bond-index considerations. We analyze the isolated disiloxane molecule H₃ SiOSiH₃ with varying Si-O-Si angles, and n-membered cyclic siloxane systems Si₂ H₄ O(CH₂ )_n-3 . All methods from quite different realms show that both covalent and ionic interactions increase simultaneously towards larger Si-O-Si angles. In addition, we present highly accurate absolute hydrogen-bond interaction energies of the investigated siloxane molecules with water and silanol as donors. It is found that intermolecular hydrogen bonding is significant at small Si-O-Si angles and weakens as the Si-O-Si angle increases until no stable hydrogen-bond complexes are obtained beyond φ_SiOSi =168°, angles typically displayed by minerals or polymers. The maximum hydrogen-bond interaction energy, which is obtained at an angle of 105°, is 11.05 kJ mol^-1 for the siloxane-water complex and 18.40 kJ mol^-1 for the siloxane-silanol complex.

Acute exacerbation of idiopathic pulmonary fibrosis after inhalation of a water repellent

The natural course of idiopathic pulmonary fibrosis (IPF) is unpredictable at the time of diagnosis. Some patients may experience episodes of acute respiratory worsening that have been termed acute exacerbations. A 58-year-old male was admitted to our Emergency Department due to progressive and intense dyspnea and dry cough after accidental inhalation of waterproof's vapor containing siloxanes. Chest high resolution computed tomography (HRCT) scan showed diffuse and bilateral ground glass attenuation, basal predominant reticular abnormalities and subpleural honeycombing. The patient didn't know that he suffered from IPF and siloxanes' inhalation triggered an acute exacerbation of his disease. Clinical course after the inhalation was aggressive and, despite steroids and cyclophosphamide therapy, the patient died 3 months after due to a respiratory failure. Inhalation of water repellents has been associated with an acute onset of respiratory symptoms and acute lung injury; usually, however, the prognosis is commonly good with a complete recovery. Our case is an example of an extremely negative reaction probably because of pre-existing and misdiagnosed IPF. Currently, no literature concerning water repellent inhalation as a trigger of acute exacerbation of IPF is available.

One-Step Synthesis of Siloxanes from the Direct Process Disilane Residue

The well-established Müller-Rochow Direct Process for the chloromethylsilane synthesis produces a disilane residue (DPR) consisting of compounds Me_n Si₂ Cl_6-n (n=1-6) in thousands of tons annually. Technologically, much effort is made to retransfer the disilanes into monosilanes suitable for introduction into the siloxane production chain for increase in economic value. Here, we report on a single step reaction to directly form cyclic, linear, and cage-like siloxanes upon treatment of the DPR with a 5 m HCl in Et₂ O solution at about 120 °C for 60 h. For simplification of the Si-Si bond cleavage and aiming on product selectivity the grade of methylation at the silicon backbone is increased to n≥4. Moreover, the HCl/Et₂ O reagent is also suitable to produce siloxanes from the corresponding monosilanes under comparable conditions.

Cubic Siloxanes with Both Si-H and Si-OtBu Groups for Site-Selective Siloxane Bond Formation

Cage-type siloxanes have attracted increasing attention as building blocks for silica-based nanomaterials as their corners can be modified with various functional groups. Cubic octasiloxanes incorporating both Si-H and Si-OtBu groups [(tBuO)_n H_8-n Si₈ O₁₂ ; n=1, 2 or 7] have been synthesized by the reaction of octa(hydridosilsesquioxane) (H₈ Si₈ O₁₂ ) and tert-butyl alcohol in the presence of a Et₂ NOH catalyst. The Si-H and Si-OtBu groups are useful for site-selective formation of Si-O-Si linkages without cage structure deterioration. The Si-H group can be selectively hydrolyzed to form a Si-OH group in the presence of Et₂ NOH, enabling the formation of the monosilanol compound (tBuO)₇ (HO)Si₈ O₁₂ . The Si-OH group can be used for either intermolecular condensation to form a dimeric cage compound or silylation to introduce new reaction sites. Additionally, the alkoxy groups of (tBuO)₇ HSi₈ O₁₂ can be treated with organochlorosilanes in the presence of a BiCl₃ catalyst to form Si-O-Si linkages, while the Si-H group remains intact. These results indicate that such bifunctional cage siloxanes allow for stepwise Si-O-Si bond formation to design new siloxane-based nanomaterials.

Janus-Cube Octasilsesquioxane: Facile Synthesis and Structure Elucidation

A perfect "Janus-cube" octasilsesquioxane, a nanometer-scale Janus particle with two different types of substituents, was synthesized through the cross-coupling of a "half-cube" cyclic sodium siloxanolate with another half-cube cyclic fluorosiloxane. The structure was confirmed by X-ray crystallography to be a Janus cube. The overall synthesis is simple and does not require drastic separation methods compared with previous methods. The synthesis of the Janus cube demonstrates a novel siloxane bond-forming reaction involving the coupling a silanol salt and fluorosilane. The reaction is mild, does not result in acid generation, and could be applied to the construction of other novel siloxane compounds.

Aqueous Modification of Nano- and Microfibrillar Cellulose with a Click Synthon

The modification of cellulose as a renewable resource has received wide attention in research and industry. A major problem regarding chemical modification, including heating and drying, is related to hornification that causes pore-system collapse and results in decreased reactivity and changes in the 3D structure of the material. A mild and green approach for the modification of different never-dried and thus wet cellulose substrates (pulp, nanostructured celluloses, and viscose fibers) by an alkoxysilane-azide in water is presented. A kinetic study of the silanization reaction demonstrates that alkoxy-trans-silanization of the cellulose surface is accomplished in water as a suspension medium within a few hours at room temperature. The resulting, azido-equipped celluloses are widely applicable precursor materials for subsequent functionalization by so-called click chemistry, for example, with a fluorescent Rhodamine derivative as a representative reagent. Successful covalent bonding was shown by GPC and a model reaction. The 3D structure of the materials remained intact, as was inter alia visualized by optical and fluorescence microscopy.

Comparison of adsorbents for H2S and D4 removal for biogas conversion in a solid oxide fuel cell

Biogas contains trace compounds detrimental for solid oxide fuel cell (SOFC) application, especially sulphur-containing compounds and volatile organic silicon compounds (VOSiCs). It is therefore necessary to remove these impurities from the biogas for fuelling an SOFC. In this paper, dynamic lab-scale adsorption tests were performed on synthetic polluted gas to evaluate the performance of a polishing treatment to remove hydrogen sulphide (H2S - sulphur compound) and octamethylcyclotetrasiloxane (D4 - VOSiC). Three kinds of adsorbents were tested: an activated carbon, a silica gel (SG) and a zeolite (Z). Z proved to be the best adsorbent for H2S removal, with an adsorbed quantity higher than [Formula: see text] at the SOFC tolerance limit. However, as concerns D4 removal, SG was the most efficient adsorbent, with an adsorbed quantity of about 184 mgD4/gSG at the SOFC tolerance limit. These results could not be explained by structural characteristics of the adsorbents, but they were partly explained by chemical interactions between the adsorbate and the adsorbent. In these experiments, internal diffusion was the controlling step, Knudsen diffusion being predominant to molecular diffusion. As Z was also a good adsorbent for D4 removal, competition phenomena were investigated with Z for the simultaneous removal of H2S and D4. It was shown that H2S retention was dramatically decreased in the presence of D4, probably due to D4 polymerization resulting in pore blocking.

Siloxane-Bond Formation Promoted by Lewis Acids: A Nonhydrolytic Sol-Gel Process and the Piers-Rubinsztajn Reaction

Siloxane formation reactions of both the nonhydrolytic sol-gel process and Piers-Rubinsztajn reaction can be integrated as Lewis acid promoted siloxane syntheses without involving silanol groups. The former was developed in the field of inorganic materials chemistry and the latter was initiated in polymer chemistry. We have realized both reactions are quite similar, in terms of 1) the nonhydrolytic reaction, 2) the use of alkoxysilanes, 3) the group-exchange reactions competing with the siloxane formation, and 4) the proposed reaction mechanisms. This Minireview focuses on the above two reactions. The evolution of both reactions should realize a more sophisticated molecular design of siloxane compounds, which surely contributes to the development of advanced functional materials.