Synthesis and characterization of a nanostructure conductive copolymer based on polyaniline and polylactic acid as an effective substrate in proteins impedimetric biosensing

Despite of all the developments in DNA microarray technology, there is not sufficient knowledge about protein abundance or their function in processes such as proteolysis, phosphorylation. Therefore, there is a significant need for direct detection and quantification of proteins, especially in processes such as proteomics, drug design and disease prediction. The present work introduce the new generation of polymeric substrate based on polyaniline and, polylactic acid, which it was used for impedimetric sensor in detection of proteins in particular for bovine serum albumin (BSA). In this copolymerization, the polylactic acid-block-polyaniline copolymer (PLA-b-PANI) was synthesized to attach polylactic acid and polyaniline using epichlorohydrin as a coupling agent. The structure of synthesized compounds in all steps, were confirmed by FT-IR and, 1H-NMR. The thermal properties and, morphology were analyzed by DSC, TGA, and, SEM. Also the electrochemical characteristics of fabricated PLA-b-PANI electrode were investigated by Electrochemical Impedance Spectroscopy (EIS) and Cyclic Voltammetry (CV). The results demonstrated that morphology of the PLA-b-PANI is sphere shape nanoparticles with dimension less than 100 nanometer diameters and, reasonable thermal properties. PLA-b-PANI was used to modify a screen-printed carbon electrode (SPCE) to fabricate a BSA impedimetric sensor. In order to increase the performance of the proposed impedimetric sensor, optimization of incubation time, pH and amount of PLA-b-PANI were investigated. The results show that the impedimetric sensor has the highest response when the electrode surface is covered with 5 microliters of PLA-b-PANI, and is incubated in BSA solution with pH 6.5 for 5 min. Impedimetric results showed that the PLA-b-PANI has excellent properties in reducing the charge transfer resistance and increasing the electron charge transfer rate. The final impedimetric sensor exhibited good repeatability, reproducibility, and chemical stability within the linear concentration range of 0.1-20 μg L-1 of BSA, and a detection limit of 0.05 μg L-1.

Formation of PLGA-PEDOT: PSS Conductive Scaffolds by Supercritical Foaming

The usage of conjugated materials for the fabrication of foams intended to be used as therapeutic scaffolds is gaining relevance these days, as they hold certain properties that are not exhibited by other polymer types that have been regularly used until the present. Hence, this work aims to design a specific supercritical CO₂ foaming process that would allow the production of porous polymeric devices with improved conductive properties, which would better simulate matrix extracellular conditions when used as therapeutic scaffolds (PLGA-PEDOT:PSS) systems. The effects of pressure, temperature, and contact time on the expansion factor, porosity, mechanical properties, and conductivity of the foam have been evaluated. The foams have been characterized by scanning electron and atomic force microscopies, liquid displacement, PBS degradation test, compression, and resistance to conductivity techniques. Values close to 40% porosity were obtained, with a uniform distribution of polymers on the surface and in the interior, expansion factors of up to 10 orders, and a wide range of conductivity values (2.2 × 10^-7 to 1.0 × 10^-5 S/cm) and mechanical properties (0.8 to 13.6 MPa Young's modulus in compression test). The conductive and porous scaffolds that have been produced by supercritical CO₂ in this study show an interesting potential for tissue engineering and for neural or cardiac tissue regeneration purposes due to the fact that electrical conductivity is a crucial factor for proper cell function and tissue development.

Towards the translation of electroconductive organic materials for regeneration of neural tissues

Carbon-based conductive and electroactive materials (e.g., derivatives of graphene, fullerenes, polypyrrole, polythiophene, polyaniline) have been studied since the 1970s for use in a broad range of applications. These materials have electrical properties comparable to those of commonly used metals, while providing other benefits such as flexibility in processing and modification with biologics (e.g., cells, biomolecules), to yield electroactive materials with biomimetic mechanical and chemical properties. In this review, we focus on the uses of these electroconductive materials in the context of the central and peripheral nervous system, specifically recent studies in the peripheral nerve, spinal cord, brain, eye, and ear. We also highlight in vivo studies and clinical trials, as well as a snapshot of emerging classes of electroconductive materials (e.g., biodegradable materials). We believe such specialized electrically conductive biomaterials will clinically impact the field of tissue regeneration in the foreseeable future. STATEMENT OF SIGNIFICANCE: This review addresses the use of conductive and electroactive materials for neural tissue regeneration, which is of significant interest to a broad readership, and of particular relevance to the growing community of scientists, engineers and clinicians in academia and industry who develop novel medical devices for tissue engineering and regenerative medicine. The review covers the materials that may be employed (primarily focusing on derivatives of fullerenes, graphene and conjugated polymers) and techniques used to analyze materials composed thereof, followed by sections on the application of these materials to nervous tissues (i.e., peripheral nerve, spinal cord, brain, optical, and auditory tissues) throughout the body.

Organic Bioelectronics for In Vitro Systems

Bioelectronics have made strides in improving clinical diagnostics and precision medicine. The potential of bioelectronics for bidirectional interfacing with biology through continuous, label-free monitoring on one side and precise control of biological activity on the other has extended their application scope to in vitro systems. The advent of microfluidics and the considerable advances in reliability and complexity of in vitro models promise to eventually significantly reduce or replace animal studies, currently the gold standard in drug discovery and toxicology testing. Bioelectronics are anticipated to play a major role in this transition offering a much needed technology to push forward the drug discovery paradigm. Organic electronic materials, notably conjugated polymers, having demonstrated technological maturity in fields such as solar cells and light emitting diodes given their outstanding characteristics and versatility in processing, are the obvious route forward for bioelectronics due to their biomimetic nature, among other merits. This review highlights the advances in conjugated polymers for interfacing with biological tissue in vitro, aiming ultimately to develop next generation in vitro systems. We showcase in vitro interfacing across multiple length scales, involving biological models of varying complexity, from cell components to complex 3D cell cultures. The state of the art, the possibilities, and the challenges of conjugated polymers toward clinical translation of in vitro systems are also discussed throughout.

Advocating Electrically Conductive Scaffolds with Low Immunogenicity for Biomedical Applications: A Review

Scaffolds support and promote the formation of new functional tissues through cellular interactions with living cells. Various types of scaffolds have found their way into biomedical science, particularly in tissue engineering. Scaffolds with a superior tissue regenerative capacity must be biocompatible and biodegradable, and must possess excellent functionality and bioactivity. The different polymers that are used in fabricating scaffolds can influence these parameters. Polysaccharide-based polymers, such as collagen and chitosan, exhibit exceptional biocompatibility and biodegradability, while the degradability of synthetic polymers can be improved using chemical modifications. However, these modifications require multiple steps of chemical reactions to be carried out, which could potentially compromise the end product's biosafety. At present, conducting polymers, such as poly(3,4-ethylenedioxythiophene) poly(4-styrenesulfonate) (PEDOT: PSS), polyaniline, and polypyrrole, are often incorporated into matrix scaffolds to produce electrically conductive scaffold composites. However, this will reduce the biodegradability rate of scaffolds and, therefore, agitate their biocompatibility. This article discusses the current trends in fabricating electrically conductive scaffolds, and provides some insight regarding how their immunogenicity performance can be interlinked with their physical and biodegradability properties.

Synthesis and Characterization of Porous, Electro-Conductive Chitosan-Gelatin-Agar-Based PEDOT: PSS Scaffolds for Potential Use in Tissue Engineering

Herein we report the synthesis and characterization of electro-conductive chitosan-gelatin-agar (Cs-Gel-Agar) based PEDOT: PSS hydrogels for tissue engineering. Cs-Gel-Agar porous hydrogels with 0-2.0% (v/v) PEDOT: PSS were fabricated using a thermal reverse casting method where low melting agarose served as the pore template. Sample characterizations were performed by means of scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction analysis (XRD) and electrochemical impedance spectroscopy (EIS). Our results showed enhanced electrical conductivity of the cs-gel-agar hydrogels when mixed with DMSO-doped PEDOT: PSS wherein the optimum mixing ratio was observed at 1% (v/v) with a conductivity value of 3.35 × 10-4 S cm-1. However, increasing the PEDOT: PSS content up to 1.5 % (v/v) resulted in reduced conductivity to 3.28 × 10-4 S cm-1. We conducted in vitro stability tests on the porous hydrogels using phosphate-buffered saline (PBS) solution and investigated the hydrogels' performances through physical observations and ATR-FTIR characterization. The present study provides promising preliminary data on the potential use of Cs-Gel-Agar-based PEDOT: PSS hydrogel for tissue engineering, and these, hence, warrant further investigation to assess their capability as biocompatible scaffolds.

Dual Redox/pH-Sensitive Micelles Self-Assembled From Star-Like Amphiphilic Copolymers Based On Sucrose For Controlled Doxorubicin Delivery

Novel dual redox/pH-sensitive star-like amphiphilic sucrose-oligo(butyl fumarate) (thioglycolic acid conjugate)-SS-poly(ethylene glycol) (Suc-OBF(TGA)-SS-PEG) copolymers and their self-assembled micelles were prepared and utilized for intracellular doxorubicin delivery. Importance of changing the hydrophobic chain length on micelles properties was investigated. Results showed that the micelles with longer hydrophobic chain exhibited smaller size and were more stable in aqueous solution. The redox and pH sensitivity of the micelles was confirmed by the change of micelle diameter/diameter distribution measured by dynamic light scattering and the change of micellar morphology observed by scanning electron microscope. The micelles display a decent doxorubicin loading capacity. In vitro release studies showed that only 14.3% doxorubicin was released from doxorubicin-loaded micelles under physiological conditions in 30 h. The release of doxorubicin was accelerated at pH 5.5 or in the presence of 10 mM glutathione at pH 7.4 (46.9% and 76.9% of doxorubicin was released, respectively, in 30 h). The doxorubicin release was further expedited under pH 5.5 and 10 mM GSH conditions (91.4%). Suc-OBF(TGA)-SS-PEG micelles displayed no cytotoxicity toward HDF cells. MTT assays indicated that doxorubicin-loaded micelles had good cytotoxicity against MCF-7 cells. This work suggested that star-like amphiphilic Suc-OBF(TGA)-SS-PEG copolymer micelles may provide a promising platform for delivering doxorubicin and other hydrophobic anticancer drugs.

3D Printing of Polycaprolactone-Polyaniline Electroactive Scaffolds for Bone Tissue Engineering

Electrostimulation and electroactive scaffolds can positively influence and guide cellular behaviour and thus has been garnering interest as a key tissue engineering strategy. The development of conducting polymers such as polyaniline enables the fabrication of conductive polymeric composite scaffolds. In this study, we report on the initial development of a polycaprolactone scaffold incorporating different weight loadings of a polyaniline microparticle filler. The scaffolds are fabricated using screw-assisted extrusion-based 3D printing and are characterised for their morphological, mechanical, conductivity, and preliminary biological properties. The conductivity of the polycaprolactone scaffolds increases with the inclusion of polyaniline. The in vitro cytocompatibility of the scaffolds was assessed using human adipose-derived stem cells to determine cell viability and proliferation up to 21 days. A cytotoxicity threshold was reached at 1% wt. polyaniline loading. Scaffolds with 0.1% wt. polyaniline showed suitable compressive strength (6.45 ± 0.16 MPa) and conductivity (2.46 ± 0.65 × 10⁻⁴ S/cm) for bone tissue engineering applications and demonstrated the highest cell viability at day 1 (88%) with cytocompatibility for up to 21 days in cell culture.

Incorporating chitin derived glucosamine sulfate into nanofibers via coaxial electrospinning for cartilage regeneration

Chitin is the second abundant natural polysaccharide, and the development of chitin and its derivatives have received more and more attention. Glucosamine sulfate (GAS) obtained by the hydrolysis of chitin can promote the growth of chondrocytes. The coaxial electrospinning technology had been utilized to encapsulated GAS into the core of polycaprolactone (PCL) nanofibers. It could protect the GAS from the environment and allow it to release sustainably over time. From the results of scanning electron microscopy (SEM), PCL/GAS nanofibers performed a typical fiber scaffold surface. Transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX) results confirmed the feasibility to use coaxial electrospinning to load GAS. Tensile tests exhibited that PCL/GAS mats could be stretched more than twice its own length. Besides, the cell experiments illustrated that PCL/GAS had a significant effect on the proliferation and growth of rat articular chondrocytes, attesting its prospect for cartilage regeneration.

Progress in Conductive Polyaniline-Based Nanocomposites for Biomedical Applications: A Review

Inherently conducting polymers (ICPs) are a specific category of synthetic polymers with distinctive electro-optic properties, which involve conjugated chains with alternating single and double bonds. Polyaniline (PANI), as one of the most well-known ICPs, has outstanding potential applications in biomedicine because of its high electrical conductivity and biocompatibility caused by its hydrophilic nature, low-toxicity, good environmental stability, and nanostructured morphology. Some of the limitations in the use of PANI, such as its low processability and degradability, can be overcome by the preparation of its blends and nanocomposites with various (bio)polymers and nanomaterials, respectively. This review describes the state-of-the-art of biological activities and applications of conductive PANI-based nanocomposites in the biomedical fields, such as antimicrobial therapy, drug delivery, biosensors, nerve regeneration, and tissue engineering. The latest progresses in the biomedical applications of PANI-based nanocomposites are reviewed to provide a background for future research.

Conducting Polymer Scaffolds Based on Poly(3,4-ethylenedioxythiophene) and Xanthan Gum for Live-Cell Monitoring

Conducting polymer scaffolds can promote cell growth by electrical stimulation, which is advantageous for some specific type of cells such as neurons, muscle, or cardiac cells. As an additional feature, the measure of their impedance has been demonstrated as a tool to monitor cell growth within the scaffold. In this work, we present innovative conducting polymer porous scaffolds based on poly(3,4-ethylenedioxythiophene) (PEDOT):xanthan gum instead of the well-known PEDOT:polystyrene sulfonate scaffolds. These novel scaffolds combine the conductivity of PEDOT and the mechanical support and biocompatibility provided by a polysaccharide, xanthan gum. For this purpose, first, the oxidative chemical polymerization of 3,4-ethylenedioxythiophene was carried out in the presence of polysaccharides leading to stable PEDOT:xanthan gum aqueous dispersions. Then, by a simple freeze-drying process, porous scaffolds were prepared from these dispersions. Our results indicated that the porosity of the scaffolds and mechanical properties are tuned by the solid content and formulation of the initial PEDOT:polysaccharide dispersion. Scaffolds showed interconnected pore structure with tunable sizes ranging between 10 and 150 μm and Young's moduli between 10 and 45 kPa. These scaffolds successfully support three-dimensional cell cultures of MDCK II eGFP and MDCK II LifeAct epithelial cells, achieving good cell attachment with very high degree of pore coverage. Interestingly, by measuring the impedance of the synthesized PEDOT scaffolds, the growth of the cells could be monitored.

Fabrication of the graphene honeycomb structure as a scaffold for the study of cell growth

The good biocompatibility of the graphene honeycomb structure was evaluated by the proliferation of HeLa and MCF-7 cell lines.