Superior Single-Entity Electrochemistry Performance of Capping Agent-Free Gold Nanoparticles Compared to Citrate-Capped Gold Nanoparticles

In observing the electrocatalytic current of nanoparticles (NPs) using single-entity electrochemistry (SEE), the surface state of the NPs significantly influences the SEE signal. This study investigates the influence of capping agents on the electrocatalytic properties of gold (Au) NPs using SEE. Two inner-sphere reactions, hydrazine oxidation and glucose oxidation, were chosen to explore the SEE characteristics of Au NPs based on the capping agent presence. The results revealed that "capping agent-free" Au NPs exhibited signal magnitudes and frequencies consistent with theoretical expectations, indicating superior stability and catalytic performance in electrolyte solutions. In contrast, citrate-capped Au NPs showed signals varying depending on the applied potential, with larger magnitudes and lower frequencies than expected, likely due to an aggregation of NPs. This study suggests that capping agents play a crucial role in the catalytic performance and stability of Au NPs in SEE. By demonstrating that minimizing capping agent presence can enhance effectiveness in SEE, it provides insights into the future applications of NPs, particularly highlighting their potential as nanocatalysts in energy conversion reactions and environmental applications.

Novel bimetallic MOF derived N-doped carbon supported Ru nanoparticles for efficient reduction of nitro aromatic compounds and rhodamine B

N-doped carbon enables Ru-NC-15 to exhibit extremely high catalytic activity towards 4-nitrophenol and rhodamine B reduction.

Fabrication of defective graphene oxide for efficient hydrogen production and enhanced 4-nitro-phenol reduction

Hydrogen has been considered as one of the most promising alternative energy source to solve the future energy demands due to its high energy capacity and emission-free character. The generation of hydrogen from non-fossil sources is necessary for the sustainable development of human life on this planet. The hydrolysis of sodium borohydride can quickly produce a large amount of hydrogenin situand on-demand in the presence of the catalyst, which can be used as an alternative energy source. So, it is crucial to fabricate the highly efficient, robust, and economical catalyst for the production of hydrogen via hydrolysis of sodium borohydride. Herein, a facile and efficient approach for the synthesis of metal-functionalized reduced graphene oxide for the production of hydrogen at room temperature was used. Moreover, the synthesized catalyst has also been tested in the field of environmental catalysis for the reduction of toxic 4-nitrophenol to valuable 4-aminophenol in the presence of sodium borohydride. The enhanced activity of prepared metal-functionalized reduced graphene oxide is ascribed to a strong affinity between Fe-N_Xand reduced graphene oxide which facilitates electron transfer as well as synergistic effect. Overall, this work presents a crucial procedure for green chemistry reactions when a carbonaceous material is selected as a catalyst.

Plasmonic Gold Nanoparticles (AuNPs): Properties, Synthesis and their Advanced Energy, Environmental and Biomedical Applications

Inducing plasmonic characteristics, primarily localized surface plasmon resonance (LSPR), in conventional AuNPs through particle size and shape control could lead to a significant enhancement in electrical, electrochemical, and optical properties. Synthetic protocols and versatile fabrication methods play pivotal roles to produced plasmonic gold nanoparticles (AuNPs), which can be employed in multipurpose energy, environmental and biomedical applications. The main focus of this review is to provide a comprehensive and tutorial overview of various synthetic methods to design highly plasmonic AuNPs, along with a brief essay to understand the experimental procedure for each technique. The latter part of the review is dedicated to the most advanced and recent solar-induced energy, environmental and biomedical applications. The synthesis methods are compared to identify the best possible synthetic route, which can be adopted while employing plasmonic AuNPs for a specific application. The tutorial nature of the review would be helpful not only for expert researchers but also for novices in the field of nanomaterial synthesis and utilization of plasmonic nanomaterials in various industries and technologies.

Rapid and Green Preparation of Multi-Branched Gold Nanoparticles Using Surfactant-Free, Combined Ultrasound-Assisted Method

The conventional seed-mediated preparation of multi-branched gold nanoparticles uses either cetyltrimethylammonium bromide or sodium dodecyl sulfate. However, both surfactants are toxic to cells so they have to be removed before the multi-branched gold nanoparticles can be used in biomedical applications. This study describes a green and facile method for the preparation of multi-branched gold nanoparticles using hydroquinone as a reducing agent and chitosan as a stabilizer, through ultrasound irradiation to improve the multi-branched shape and stability. The influence of pH, mass concentration of chitosan, hydroquinone concentration, as well as sonication conditions such as amplitude and time of US on the growth of multi-branched gold nanoparticles, were also investigated. The spectra showed a broad band from 500 to over 1100 nm, an indication of the effects of both aggregation and contribution of multi-branches to the surface plasmon resonance signal. Transmission electron microscopy measurements of GNS under optimum conditions showed an average core diameter of 64.85 ± 6.79 nm and 76.11 ± 14.23 nm of the branches of multi-branched particles. Fourier Transfer Infrared Spectroscopy was employed to characterize the interaction between colloidal gold nanoparticles and chitosan, and the results showed the presence of the latter on the surface of the GNS. The cytotoxicity of chitosan capped GNS was tested on normal rat fibroblast NIH/3T3 and normal human fibroblast BJ-5ta using MTT assay concentrations from 50–125 µg/mL, with no adverse effect on cell viability.

A Mini-Review on Anion Exchange and Chelating Polymers for Applications in Hydrometallurgy, Environmental Protection, and Biomedicine

The rapidly increasing demand for technologies aiming to resolve challenges of separations and environmental protection causes a sharp increase in the demand for ion exchange (IX) and chelating polymers. These unique materials can offer target-selective adsorption properties vital for the removal or recovery of harmful and precious materials, where trace concentrations thereof make other techniques insufficient. Hence, recent achievements in syntheses of IX and chelating resins designed and developed in our research group are discussed within this mini-review. The aim of the present work is to reveal that, due to the diversified and unique physiochemical characteristics of the proposed materials, they are not limited to traditional separation techniques and could be used in multifunctional areas of applications, including catalysis, heat management, and biomedicine.

Bimetallic Nanoparticles Anchored on Core-Shell Support as an Easily Recoverable and Reusable Catalytic System for Efficient Nitroarene Reduction

We report an easily recoverable and reusable versatile magnetic catalyst (Fe3O4@CS_AgNi, where CS = chitosan) for organic reduction reactions. The catalytic system is prepared by dispersing AgNi bimetallic nanoparticles on the magnetite core-shell (Fe3O4@CS). The as-synthesized catalyst has been characterized by spectroscopic techniques, such as IR, UV-vis, and X-ray photoelectron spectroscopy (XPS), and analytical tools, such as thermogravimetric analysis, powder X-ray diffraction, Brunauer-Emmett-Teller adsorption, FEG-scanning electron microscopy, high-resolution transmission electron microscopy (HR-TEM), inductively coupled plasma-atomic emission spectroscopy, and magnetic measurements. HR-TEM studies indicate the core-shell structure of Fe3O4@CS and confirm the presence of AgNi nanoparticles on the surface of Fe3O4@CS spheres. IR spectral and XPS studies lend evidence for the occurrence of a strong chemical interaction between the amino groups of CS and AgNi nanoparticles. The nano-catalyst Fe3O4@CS_AgNi rapidly reduces p-nitrophenol to p-aminophenol using NaBH4 as the reductant within a few minutes under ambient conditions (as monitored by UV-visible spectroscopy). The utility of this catalytic system has also been extended to the reduction of other nitroarenes. A strong interaction between Fe3O4@CS and AgNi nanoparticles impedes the leaching of AgNi nanoparticles from the core-shell support, leading to excellent reusability of the catalyst.

Molecular reactors for synthesis of polymeric nanocomposites with noble metal nanoparticles for catalytic decomposition of 4-nitrophenol

HYPOTHESIS

A new, facile in-situ method for synthesis of polymeric nanocomposites (NCs) with nanoparticles (NPs) of Au, Pt and Pd is proposed. The method involves reduction-coupled sorption of Au(III), Pt(VI), and Pd(II), which avoids diffusion limitations, allowing the precipitation and stabilization of the NPs directly in the polymeric matrix.

EXPERIMENTS

The obtained nanomaterials were characterized by transmission electron microscopy (TEM), and Fourier-transformation infrared spectroscopy (FT-IR). NPs loaded into polymers were also investigated using X-ray diffraction (XRD).

FINDINGS

Based on the results, it was concluded that the amino functionalities simultaneously reduced noble metals ions and capped the NPs. The average diameter of the obtained AuNPs ranged from 25 to 109 nm, while reduction-coupled sorption was carried out in 1 and 3 mol L^-1 HCl solutions, respectively. Applying a 0.1 mol L^-1 HCl solution containing Au(III), Pd(II) and Pt(VI), a NC with AuNPs and cubic-like PdNPs was fabricated, while using a solution of the same composition, but in 3 mol L^-1 HCl, resulted in formation of a NC with flower-like PtNPs. Ultimately, the selected NC based on a resin with functionalities derived from 1-(2-aminoethyl)piperazine and with bi-metallic active sites, i.e. AuNPs and PdNPs, revealed catalytic activity in the reduction of 4-nitrophenol.

Synthesis of a novel graphene-based gold nanocomposite using PVEIM-b-PNIPAM as a stabilizer and its thermosensitivity for the catalytic reduction of 4-nitrophenol

Fabrication of a graphene-based gold nanocomposite using PVEIM-b-PNIPAM as a stabilizer and its thermosensitivity for the reduction of 4-nitrophenol.