Tough Engineering Hydrogels Based on Swelling-Freeze-Thaw Method for Artificial Cartilage

Articular cartilage, which exhibits toughness and ultralow friction even under high squeezing pressures, plays an important role in the daily movement of joints. However, joint soft tissue lesions or injuries caused by diseases, trauma, or human functional decline are inevitable. Poly(vinyl alcohol) (PVA) hydrogels, which have a water content and compressive strength similar to those of many tissues and organs, have the potential to replace tough connective tissues, including cartilage. However, currently, PVA hydrogels are not suitable for complex dynamic environments and lack rebound resilience, especially under long-term or multicycle mechanical loads. Inspired by biological tissues that exhibit increased mechanical strength after swelling, we report a tough engineered hydrogel (TEHy) fabricated by swelling and freeze-thaw methods with a high compressive strength (31 MPa), high toughness (1.17 MJ m^-3), a low friction coefficient (0.01), and a low energy loss factor (0.22). Notably, the TEHy remained remarkably resilient after 100 000 cycles of contact extrusion and remains intact after being compressed by an automobile with a weight of approximately 1600 kg. The TEHy also exhibited excellent water swelling resistance (volume and weight changes less than 5%). Moreover, skeletal muscle cells were able to readily attach and proliferate on the surface of TEHy-6, suggesting its outstanding biocompatibility. Overall, this swelling and freeze-thaw strategy solves the antifatigue and stability problems of PVA hydrogels under large static loads (>10 000 N) and provides an avenue to fabricate engineering hydrogels with strong antifatigue and antiswelling properties and ultralow friction for potential use as biomaterials in tissue engineering.

Kinetic Method of Producing Pores Inside Protein-Based Biomaterials without Compromising Their Structural Integrity

Hydrogels made from globular proteins cross-linked covalently into a stable network are becoming an important type of biomaterial, with applications in artificial tissue design and cell culture scaffolds, and represent a promising system to study the mechanical and biochemical unfolding of proteins in crowded environments. Due to the small size of the globular protein domains, typically 2-5 nm, the primary network allows for a limited transfer of protein molecules and prevents the passing of particles and aggregates with dimensions over 100 nm. Here, we demonstrate a method to produce protein materials with micrometer-sized pores and increased permeability. Our approach relies on forming two competing networks: a covalent network made from cross-linked bovine serum albumin (BSA) proteins via a light-activated reaction and a physical network triggered by the aggregation of a polysaccharide, alginate, in the presence of Ca²⁺ ions. By fine-tuning the reaction times, we produce porous-protein hydrogels that retain the mechanical characteristics of their less-porous counterparts. We further describe a simple model to investigate the kinetic balance between the nucleation of alginate and cross-linking of BSA molecules and find the upper rate of the alginate aggregation reaction driving pore formation. By enabling a more significant permeability for protein-based materials without compromising their mechanical response, our method opens new vistas into studying protein-protein interactions and cell growth and designing novel affinity methods.

Alginate-Based Smart Materials and Their Application: Recent Advances and Perspectives

Nature produces materials using available molecular building blocks following a bottom-up approach. These materials are formed with great precision and flexibility in a controlled manner. This approach offers the inspiration for manufacturing new artificial materials and devices. Synthetic artificial materials can find many important applications ranging from personalized therapeutics to solutions for environmental problems. Among these materials, responsive synthetic materials are capable of changing their structure and/or properties in response to external stimuli, and hence are termed "smart" materials. Herein, this review focuses on alginate-based smart materials and their stimuli-responsive preparation, fragmentation, and applications in diverse fields from drug delivery and tissue engineering to water purification and environmental remediation. In the first part of this report, we review stimuli-induced preparation of alginate-based materials. Stimuli-triggered decomposition of alginate materials in a controlled fashion is documented in the second part, followed by the application of smart alginate materials in diverse fields. Because of their biocompatibility, easy accessibility, and simple techniques of material formation, alginates can provide solutions for several present and future problems of humankind. However, new research is needed for novel alginate-based materials with new functionalities and well-defined properties for targeted applications.

Biodegradable macromers for implant bulk and surface engineering

Macromers, polymeric molecules with at least two functional groups for cross-polymerization, are interesting materials to tailor mechanical, biochemical and degradative bulk and surface properties of implants for tissue regeneration. In this review we focus on macromers with at least one biodegradable building block. Manifold design options, such as choice of polymeric block(s), optional core molecule and reactive groups, as well as cross-co-polymerization with suitable anchor or linker molecules, allow the adaptation of macromer-based biomaterials towards specific application requirements in both hard and soft tissue regeneration. Implants can be manufactured from macromers using additive manufacturing as well as molding and templating approaches. This review summarizes and discusses the overall concept of biodegradable macromers and recent approaches for macromer processing into implants as well as techniques for surface modification directed towards bone regeneration. These aspects are reviewed including a focus on the authors' contributions to the field through research within the collaborative research project Transregio 67.

Mammalian and Fish Gelatin Methacryloyl-Alginate Interpenetrating Polymer Network Hydrogels for Tissue Engineering

Gelatin methacryloyl (GelMA) has been widely studied as a biomaterial for tissue engineering. Most studies focus on mammalian gelatin, but certain factors, such as mammalian diseases and diet restrictions, limit the use of mammalian gelatin. Thus, fish gelatin has received much attention as a substitute material in recent years. To develop a broadly applicable hydrogel with excellent properties, an interpenetrating polymer network (IPN) hydrogel was synthesized, since IPN hydrogels consist of at least two different hydrogel components to combine their advantages. In this study, we prepared GelMA using type A and fish gelatin and then synthesized IPN hydrogels using GelMA with alginate. GelMA single-network hydrogels were used as a control group. The favorable mechanical properties of type A and fish hydrogels improved after the synthesis of the IPN hydrogels. Type A and fish IPN hydrogels showed different mechanical properties (mechanical strength, swelling ratio, and degradation rate) and different cross-sectional morphologies, since the degree of mechanical enhancement in fish IPN hydrogels was less than that in type A; however, the cell biocompatibilities were not significantly different. Therefore, these findings could serve as a reference for future studies when selecting GelMA as a biological material for tissue engineering.

Recent innovations in artificial skin

The skin is a "smart", multifunctional organ that is protective, self-healing and capable of sensing and many forms of artificial skins have been developed with properties and functionalities approximating those of natural skin. Starting from specific commercial products for the treatment of burns, progress in two fields of research has since allowed these remarkable materials to be viable skin replacements for a wide range of dermatological conditions. This review maps out the development of bioengineered skin replacements and synthetic skin substitutes, including electronic skins. The specific behaviors of these skins are highlighted, and the performances of both types of artificial skins are evaluated against this. Moving beyond mere replication, highly advanced artificial skin materials are also identified as potential augmented skins that can be used as flexible electronics for health-care monitoring and other applications.

Host-Guest-Mediated Epitope Presentation on Self-Assembled Peptide Amphiphile Hydrogels

A key feature in biomaterial design is the incorporation of bioactive signals into artificial constructs to stimulate tissue regeneration. Most currently used hydrogel cell culture systems depend on the covalent attachment of extracellular matrix (ECM)-derived peptides to either macromolecular units or smaller self-assembling building blocks, thereby restricting biosignal presentation and adaptability. However, new ways to rationally incorporate adhesion epitopes through noncovalent interactions would offer opportunities to better recreate the dynamic and reversible nature of the native ECM. Here, we report on a noncovalent epitope presentation approach mediated by host-guest interactions. Using peptide amphiphile hydrogels, we demonstrate that the adamantane/β-cyclodextrin pair can be used to anchor RGDS cell adhesion signals onto self-assembled hydrogels via host-guest interactions. We evaluate hydrogel morphological and rheological properties as well as fibroblast attachment, organization, and spreading when cultured atop these scaffolds. This host-guest-mediated epitope display might lead to new self-assembling hydrogels for improved cell culture applications in fields such as tissue engineering and regenerative medicine.

Unprecedented Acid-Promoted Polymerization and Gelation of Acrylamide: A Serendipitous Discovery

Dilute acid polymerizes degassed, aqueous acrylamide with concomitant gelation, without the need for added free radical initiator or cross-linking agent. This reaction is accelerated by sonication or UV irradiation, but inhibited by adventitious oxygen or the addition of a free radical inhibitor, suggesting an acid-accelerated free radical process. The resulting hydrogels are thixotropic in nature and partially disrupted by the addition of chaotropic agents, indicating the importance of hydrogen bonding to the 3D network. This discovery was made while trying to prepare pectin-polyacrylamide hydrogels. We observed that pectin initiated the gelation of acrylamide, but only if the aqueous pectin samples had a pH lower than ca. 5.

Biodegradable and electroconductive poly(3,4-ethylenedioxythiophene)/carboxymethyl chitosan hydrogels for neural tissue engineering

Electroconductive hydrogels with excellent electromechanical properties have become crucial for biomedical applications. In this study, we developed a conductive composite hydrogel via in-situ chemical polymerization based on carboxymethyl chitosan (CMCS), as a biodegradable base macromolecular network, and poly(3,4-ethylenedioxythiophene) (PEDOT), as a conductive polymer layer. The physicochemical and electrochemical properties of conductive hydrogels (PEDOT/CMCS) with different contents of PEDOT polymer were analyzed. Cell viability and proliferation of neuron-like rat phaeochromocytoma (PC12) cells on these three-dimensional conductive hydrogels were evaluated in vitro. As results, the prepared semi-interpenetrating network hydrogels were shown to consist of up to 1825±135wt% of water with a compressive modulus of 9.59±0.49kPa, a porosity of 93.95±1.03% and an electrical conductivity of (4.68±0.28)×10^-3S·cm^-1. Cell experiments confirmed that PEDOT/CMCS hydrogels not only had no cytotoxicity, but also supported cell adhesion, viability and proliferation. These results demonstrated that the incorporation of conductive PEDOT component into CMCS hydrogels endowed the hydrogels with enhanced mechanical strength, conductivity and kept the biocompatibility. Thus, the attractive performances of these composite hydrogels would make them suitable for further neural tissue engineering application, such as nerve regeneration scaffold materials.

Interpenetrating network hydrogels with high strength and transparency for potential use as external dressings

Interpenetrating polymer network (IPN) hydrogels composed of gelatin and hydroxypropyl cellulose (HPC) were prepared by successive enzymatic and chemical crosslinking approaches. The hydrogels displayed porous structure and the pore size decreased with the increase of HPC content. Due to the entanglement and interpenetrating between the two crosslinked networks, the IPN hydrogels exhibited excellent mechanical strength and light transmittance. The maximum tensile and tear strengths of the IPN hydrogels reached 3.1 and 5.2MPa, respectively. The water vapor permeability of the IPN hydrogels was within the acceptable range to maintain appropriate moisture for wound healing. The cytotoxicity evaluation indicated that the IPN hydrogels exhibited no toxicity to fibroblast cells. In addition, the hydrogels were loaded with chloramphenicol by pre-soaking in drug solutions to evaluate drug-loading capacity and in vitro release behavior. It was found that the drug loaded hydrogels could act as drug delivery devices to create microbe free microenvironment, which was advantageous for wound healing.