A simple theory for interfacial properties of dilute solutions

Recent studies suggest that cosolute mixtures may exert significant non-additive effects upon protein stability. The corresponding liquid–vapor interfaces may provide useful insight into these non-additive effects. Accordingly, in this work, we relate the interfacial properties of dilute multicomponent solutions to the interactions between solutes. We first derive a simple model for the surface excess of solutes in terms of thermodynamic observables. We then develop a lattice-based statistical mechanical perturbation theory to derive these observables from microscopic interactions. Rather than adopting a random mixing approximation, this dilute solution theory (DST) exactly treats solute–solute interactions to lowest order in perturbation theory. Although it cannot treat concentrated solutions, Monte Carlo (MC) simulations demonstrate that DST describes the interactions in dilute solutions with much greater accuracy than regular solution theory. Importantly, DST emphasizes a fundamental distinction between the “intrinsic” and “effective” preferences of solutes for interfaces. DST predicts that three classes of solutes can be distinguished by their intrinsic preference for interfaces. While the surface preference of strong depletants is relatively insensitive to interactions, the surface preference of strong surfactants can be modulated by interactions at the interface. Moreover, DST predicts that the surface preference of weak depletants and weak surfactants can be qualitatively inverted by interactions in the bulk. We also demonstrate that DST can be extended to treat surface polarization effects and to model experimental data. MC simulations validate the accuracy of DST predictions for lattice systems that correspond to molar concentrations.

Synthesis, characterization and in vitro cytotoxicity studies of poly-N-isopropyl acrylamide gel nanoparticles and films

In this work, we show synthesis that leads to thermoreponsive poly-N-isopropyl acrylamide (pNIPAM) nanogels with sizes below 100 nm, irrespectively of the surfactant to crosslinker ratio. We also show that in many environments the temperature induced pNIPAM collapse at Lower Critical Solution Temperature (LCST) of 32.5 °C is accompanied by gel nanoparticles' aggregation. Thus, the proper information on the nanoparticle (NP) structure and deswelling can be obtained only if the routinely measured hydrodynamic radius is supplemented by information on the molecular weight, which can be obtained from the intensity of scattered light. We measured the dynamics and reversibility of the deswelling and subsequent aggregation processes. Furthermore, we show that the highly concentrated pNIPAM gel NPs reversibly form bulk hydrogel networks of varied interconnected porous structure. We show, that in case of drying pNIPAM gel NPs above the LCST, it is possible to obtain films with 20-fold increase in storage modulus (G') compared to hydrogel networks measured at room temperature. They exhibit temperature hysteresis behavior around LCST of 32.5 °C similar to pNIPAM films. Finally, we show that these hydrogel films, lead to extended proliferation of cells across three different types: fibroblast, endothelial and cancer cells. Additionally, none of the films exhibited any cytotoxic effects. Our study brings new insights into physicochemical characterization of pNIPAM gel NPs and networks behavior in realistic conditions of in vitro measurements, especially by means of dynamic light scattering as well as final unique properties of both gel NPs and formed porous films for possible tissue engineering applications.

Influence of TMAO as co-solvent on the gelation of silica-PNIPAm core-shell nanogels at intermediate volume fractions

We study the structure and dynamics of poly(N-isopropylacrylamide) (PNIPAm) core-shell nanogels dispersed in aqueous trimethylamine N-oxide (TMAO) solutions by means of small-angle X-ray scattering and X-ray photon correlation spectroscopy (XPCS). Upon increasing the temperature above the lower critical solution temperature of PNIPAm at 33 °C, a colloidal gel is formed as identified by an increase of I(q) at small q as well as a slowing down of sample dynamics by various orders of magnitude. With increasing TMAO concentration the gelation transition shifts linearly to lower temperatures. Above a TMAO concentration of approximately 0.40 mol/L corresponding to a 1 : 1 ratio of TMAO and NIPAm groups, collapsed PNIPAm states are found for all temperatures without any gelation transition. This suggests that reduction of PNIPAm-water hydrogen bonds due to the presence of TMAO results in a stabilisation of the collapsed PNIPAm state and suppresses gelation of the nanogel.

The role of osmolytes in the temperature-triggered conformational transition of poly(N-vinylcaprolactam): an experimental and computational study

Biomedical industries are widely exploring the use of thermo-responsive polymers (TRPs) in the advanced development of drug delivery and in many other pharmaceutical applications. There is a great need to investigate the use of less toxic and more (bio-)compatible TRPs employing several additives, which could modify the conformational transition behavior of TRPs in aqueous solution. To move forward in this aspect, we have chosen the less toxic bio-based polymer poly(N-vinylcaprolactam) (PVCL) and three different methylamine-based osmolytes, trimethylamine N-oxide (TMAO), betaine and sarcosine, in order to investigate their particular interactions with the polymer segments in PVCL and therefore the corresponding changes in the thermo-responsive conformational behavior. Several biophysical techniques, UV-visible spectroscopy, fluorescence spectroscopy, dynamic light scattering (DLS) and laser Raman spectroscopy, as well as classical computer simulation methods such as molecular dynamics are employed in the current work. All the studied methylamines are found to favor the hydrophobic collapse of the polymer thus stabilizing the globular state of PVCL. Sarcosine is observed to cause the maximum decrease in lower critical solution temperature (LCST) of PVCL followed by TMAO and then betaine. The differences observed in the LCST values of PVCL in the presence of these molecules can be attributed to the different polymer-osmolyte interactions. The less sterically hindered N atom in the case of sarcosine causes a significant difference in the phase transition temperature values of PVCL compared to betaine and TMAO, where the nitrogen atom is buried by three methyl groups attached to it.

Efficacy of several additives to modulate the phase behavior of biomedical polymers: A comprehensive and comparative outlook

Several new classes of polymeric materials are being introduced with unique properties. Thermoresponsive polymers (TRPs) are one of the most fascinating and emerging class of biomaterials in biomedical research. The design of TRPs with good response to temperature and its ability to exhibit coil to globular transition behavior near to physiological temperature made them more promising materials in the field of biomaterials and biomedicines. Instead of numerous studies on TRPs, the mechanistic interplay among several additives and TRPs is still not understood clearly and completely. The lack of complete understanding of biomolecular interactions of various additives with TRPs is limiting their applications in interdisciplinary science as well as pharmaceutical industry. There is a great need to provide a collective and comprehensive information of various additives and their behavior on widely accepted biopolymers, TRPs such as poly(N-isopropylacrylamide) (PNIPAM), poly(vinyl methyl ether) (PVME), poly(N-vinylcaprolactum) (PVCL) and poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) in aqueous solution. Obviously, as the literature on the influence of various additives on TRPs is very vast, therefore we focus our review only on these four selected TRPs. Additives such as polyols, methylamines, surfactants and denaturants basically made the significant changes in water structure associated to polymer via their entropy variation which is the direct influence of their directly or indirectly binding abilities. Eventually, this review addresses a brief overview of the most recent literature of applications based phase behavior of four selected TRPs in response to external stimuli. The work enhances the knowledge for use of TRPs in the advanced development of drug delivery system and in many more pharmaceutical applications. These kinds of studies provide powerful impact in exploring the utility range of polymeric materials in various field of science.

An efficient study to reach physiological temperature with poly(N-isopropylacrylamide) in presence of two differently behaving additives

HYPOTHESIS

The new findings in the field of polymeric materials expanding their applications in improving the quality of health care are of primary concern. Undoubtedly, the alteration in surface properties of polymeric materials on addition of different additives may provide a step forward towards their better implications in many areas of science. In this regard, the interactions of poly(N-isopropylacrylamide) (PNIPAM) with two differently behaving additives may lead to a new method to carry the phase transition temperature of PNIPAM more near to body temperature so that it can be easily used in drug delivery through intravenous or oral insertion.

EXPERIMENTS

Individually, the addition of sodium dodceylsulfate (SDS) and trimethylamine N-oxide (TMAO) is increasing and decreasing the lower critical solution temperature (LCST) of PNIPAM as compared to classical LCST of PNIPAM in aqueous solution, respectively. In the present study, we try to emphasis the role of mixed SDS and TMAO environment in varying ratios on the phase transition behaviour of PNIPAM. Many biophysical techniques are employed such as UV-visible spectroscopy, fluorescence spectroscopy and dynamic light scattering (DLS), Laser Raman spectroscopy technique and Field emission scanning electron Microscopy (FESEM) for this part of work.

FINDINGS

The SDS is observed to form globules with PNIPAM segments and do not lead to turbidity of solution for the concentration greater than 10 µM. The negatively charged SDS bound PNIPAM globules that do not allow PNIPAM to associate, however; TMAO leads to turbid solution resulted from the hydrophobic association of PNIPAM. SDS is found to be very effective in increasing the LCST up to 62.8 ^°C even at very low (7.5 mM) concentration as compared to decreasing efficiency of TMAO where LCST reaches up to 29.4 ^°C for 0.75 M however, their mixture in specified concentration (1 mM SDS and 0.1 M TMAO) can bring the LCST of PNIPAM very near to body temperature (i.e. ∼36 ^°C) that is quiet promising for its use in target delivery engineering. TMAO ability to counteract the adverse effect of SDS is the main core reason in getting LCST near to body temperature.

Unravelling the role of polyols with increasing carbon chain length and OH groups on the phase transition behavior of PNIPAM

In advanced applications of pharmaceutical, agricultural and biomedical research, thermoresponsive polymers (TRPs) are potential candidates which show conformational transitions at given temperatures.

Synthesis of multi-arm star thermo-responsive polymers and topology effects on phase transition

Linear and star thermo-responsive polymers of poly(N-acryloylsarcosine methyl ester) [(PNASME)_n] and poly(N-isopropylacrylamide) [(PNIPAM)_n] with arm number n = 1, 2, 3 and 4 were synthesized following a core-first method via solution RAFT polymerization employing a series of mono- and multi-functional chain transfer agents.

Influence of additives on thermoresponsive polymers in aqueous media: a case study of poly(N-isopropylacrylamide)

Thermoresponsive polymers (TRPs) in different solvent media have been studied over a long period and are important from both scientific and technical points of view.