Green Bioanalytical Applications of Graphene Oxide for the Extraction of Small Organic Molecules

Bioanalysis is the scientific field of the quantitative determination of xenobiotics (e.g., drugs and their metabolites) and biotics (e.g., macromolecules) in biological matrices. The most common samples in bioanalysis include blood (i.e., serum, plasma and whole blood) and urine. However, the analysis of alternative biosamples, such as hair and nails are gaining more and more attention. The main limitations for the determination of small organic compounds in biological samples is their low concentration in these matrices, in combination with the sample complexity. Therefore, a sample preparation/analyte preconcentration step is typically required. Currently, the development of novel microextraction and miniaturized extraction techniques, as well as novel adsorbents for the analysis of biosamples, in compliance with the requirements of Green Analytical Chemistry, is in the forefront of research in analytical chemistry. Graphene oxide (GO) is undoubtedly a powerful adsorbent for sample preparation that has been successfully coupled with a plethora of green extraction techniques. GO is composed of carbon atoms in a sp² single-atom layer of a hybrid connection, and it exhibits high surface area, as well as good mechanical and thermal stability. In this review, we aim to discuss the applications of GO and functionalized GO derivatives in microextraction and miniaturized extraction techniques for the determination of small organic molecules in biological samples.

Fabrication of ZIF-71/Fe3O4/polythionine nanoarray-functionalized carbon cotton cloth for simultaneous extraction and quantitation of febuxostat and diclofenac

Synthesis of a material based on carbonized cotton cloth/zeolite imidazolate framework was applied to ultrasound-assisted dispersive magnetic solid-phase extraction and high-performance liquid chromatography-ultraviolet to detect diclofenac and febuxostat in human plasma.

Greenness of magnetic nanomaterials in miniaturized extraction techniques: A review

Green analytical chemistry principles should be followed, as much as possible, and particularly during the development of analytical sample preparation methods. In the past few years, outstanding materials such as ionic liquids, metal-organic frameworks, carbonaceous materials, molecularly imprinted materials, and many others, have been introduced in a wide variety of miniaturized techniques in order to reduce the amount of solvents and sorbents required during the analytical sample preparation step while pursuing more efficient extraction methods. Among them, magnetic nanomaterials (MNMs) have gained special attention due to their versatile properties. Mainly, their ability to be separated from the sample matrix using an external magnetic field (thus enormously simplifying the entire process) and their easy combination with other materials, which implies the inclusion of a countless number of different functionalities, highly specific in some cases. Therefore, MNMs can be used as sorbents or as magnetic support for other materials which do not have magnetic properties, the latter permiting their combination with novel materials. The greenness of these magnetic sorbents in miniaturized extractions techniques is generally demonstrated in terms of their ease of separation and amount of sorbent required, while the nature of the material itself is left unnoticed. However, the synthesis of MNMs is not always as green as their applications, and the resulting MNMs are not always as safe as desired. Is the analytical sample preparation field ready for using green magnetic nanomaterials? This review offers an overview, from a green analytical chemistry perspective, of the current state of the use of MNMs as sorbents in microextraction strategies, their preparation, and the analytical performance offered, together with a critical discussion on where efforts should go.

Magnetic Solid-Phase Extraction of Organic Compounds Based on Graphene Oxide Nanocomposites

Graphene oxide (GO) is a chemical compound with a form similar to graphene that consists of one-atom-thick two-dimensional layers of sp²-bonded carbon. Graphene oxide exhibits high hydrophilicity and dispersibility. Thus, it is difficult to be separated from aqueous solutions. Therefore, functionalization with magnetic nanoparticles is performed in order to prepare a magnetic GO nanocomposite that combines the sufficient adsorption capacity of graphene oxide and the convenience of magnetic separation. Moreover, the magnetic material can be further functionalized with different groups to prevent aggregation and extends its potential application. Until today, a plethora of magnetic GO hybrid materials have been synthesized and successfully employed for the magnetic solid-phase extraction of organic compounds from environmental, agricultural, biological, and food samples. The developed GO nanocomposites exhibit satisfactory stability in aqueous solutions, as well as sufficient surface area. Thus, they are considered as an alternative to conventional sorbents by enriching the analytical toolbox for the analysis of trace organic compounds.

Facile electrochemical preparation of overoxidizedpolypyrrole/RGO composite for ds-DNA immobilization: a novel signal amplified sensing platform for electrochemical determination of chlorpheniramine

BACKGROUND

Chlorpheniramine (CPA), thanks to its relatively lower side effects, is a widely prescribed medicine for alleviating allergic symptoms as well as some medical emergencies. Owning to this extensive use, many efforts have been directed to measure chlorpheniramine both in vivo and in vitro. High performance liquid chromatography (HPLC), both normal and reverse phase, as well as spectrochemical and electrochemical methods are analytical approaches which have been extensively exploited for determination of CPA. Among them, electrochemical techniques have found elegant place for analysis of CPA due to simplicity, sensitivity and ease of instrumentation.

METHODS

Herein, we have reported the preparation and characterization of a biosensor by immobilization of double-stranded DNA on the surface of overoxidizedpolypyrrole-reduced graphene oxide modified pencil graphite electrode (ds-DNA-PPyox/RGO/PGE) as well as its novel usability in measurement of chlorpheniramine (CPA). Scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), UV-Vis spectroscopy and differential pulse voltammetry (DPV) were exploited in order to characterize and evaluate the performance of the proposed biosensor.

RESULTS

Final results showed that proposed strategy for modification of PGE introduces an ultra-sensitive biosensor for CPA which offers the best detection limitamong all previously reported electrochemical sensors for CPA. Taking advantage of this biosensor for determination of CPA, a wide linear dynamic range from 0.05 to 200 μM, and a low limit of detection 0.023 μM were obtained by using DPV method. Usability of this biosensor was also confirmed by determination of CPA in tablet and spiked urine samples.

CONCLUSIONS

Overoxidized polypyrrole-reduced graphene oxide offered a suitable substrate for immobilization of ds-DNA by which a new biosensor for determination of CPA was fabricated. Proposed biosensor can successfully be used for determination of CPA in urine samples taking advantage of electroanalytical methods. Graphical abstract.

Silica-coated magnetic iron oxide functionalized with hydrophobic polymeric ionic liquid: a promising nanoscale sorbent for simultaneous extraction of antidiabetic drugs from human plasma prior to their quantitation by HPLC

Herein, silica-coated iron oxide nanoparticles modified with imidazolium-based polymeric ionic liquid (Fe₃O₄@SiO₂@PIL) were fabricated as a sustainable sorbent for magnetic solid-phase extraction (MSPE) and simultaneous determination of trace antidiabetic drugs in human plasma by high-performance liquid chromatography-ultraviolet detection (HPLC-UV). The Fe₃O₄ core was functionalized by silica (SiO₂) and vinyl layers where the ionic liquid 1-vinyl-3-octylimidazolium bromide (VOIM-Br) was attached through a free radical copolymerization process. In order to achieve hydrophobic magnetic nanoparticles and increase the merits of the sorbent, Br⁻ anions were synthetically replaced with PF₆⁻. The properties and morphology of the sorbent were characterized by various techniques and all the results illustrated the prosperous synthesis of Fe₃O₄@SiO₂@PIL. A comprehensive study was carried out to investigate and optimize various parameters affecting the extraction efficiency. The limit of detection (LOD, S/N = 3) for empagliflozin, metformin and canagliflozin was 1.3, 6.0 and 0.8 ng mL⁻¹, respectively. Linearity (0.997 ≥ r² ≥ 0.993) and linear concentration ranges of 5.0–1200.0, 20.0–1800.0 and 5.0–1000.0 ng mL⁻¹ were obtained for empagliflozin, metformin and canagliflozin, respectively. Intra-assay (3.8–7.5%, n = 9) and inter-assay (3.2–8.5%, n = 12) precisions as well as accuracies (≤9.1%) displayed good efficiency of the method. Finally, the method was applied for the quantitation of antidiabetic drugs in human plasma after oral administration and main pharmacokinetic data including T_max (h), C_max (ng mL⁻¹), AUC_0–24 (ng h mL⁻¹), AUC_0–∞ (ng h mL⁻¹), and T_1/2 (h) were evaluated.

A sustainable nanoscale core–shell modified with hydrophobic polymeric ionic liquid was fabricated for simultaneous extraction and determination of antidiabetic drugs.