Novel magnetic bimetallic AuCu catalyst for reduction of nitroarenes and degradation of organic dyes

Herein, core-shell magnetic nanoparticles are modified with imidazolium-tagged phosphine and propylene glycol moieties and used for the stabilization of bimetallic AuCu nanoparticles. The structure and morphology of the prepared material are identified with SEM, TEM, XRD, XPS, atomic absorption spectroscopy, Fourier translation infrared spectroscopy, and a vibrating sample magnetometer. This hydrophilic magnetic bimetallic catalyst is applied in the reduction of toxic nitroarenes and reductive degradation of hazardous organic dyes such as methyl orange (MO), methyl red (MR), and rhodamine B (RhB), as well as in the degradation of tetracycline (TC). This magnetic AuCu catalyst indicated superior activity in all three mentioned reactions in comparison with its single metal Au and Cu analogs. This catalyst is recycled for 17 consecutive runs in the reduction of 4-nitrophenol to 4-aminophenol without a significant decrease in catalytic activity and recycled catalyst is characterized.

Mixed valence Sn doped (CH3NH3)3Bi2Br9 produced by mechanochemical synthesis

Bismuth halides with formula A₃Bi₂X₉, where A is an inorganic or organic cation, show desirable properties as solar absorbers and luminescent materials. Control of structural and electronic dimensionality of these compounds is important to yield materials with good light absorption and charge transport. Here we report mechanochemical reaction of (CH₃NH₃)₃Bi₂Br₉ with SnBr₂ at room temperature in air, yielding a material with strong absorption across the visible region. We attribute this to mixed valence doping of Sn(II) and Sn(IV) on the Bi site. X-Ray diffraction shows no secondary phases, even after heating at 200 °C to improve crystallinity. X-Ray photoelectron spectroscopy suggests the presence of Sn(II) and Sn(IV) states. A similar approach to dope Sn into the iodide analogue (CH₃NH₃)₃Bi₂I₉ was unsuccessful.

Novel Heteroleptic Tin(II) Complexes Capable of Forming SnO and SnO2 Thin Films Depending on Conditions Using Chemical Solution Deposition

A new heteroleptic complex series of tin was synthesized by the salt metathesis reaction of SnX₂ (X = Cl, Br, and I) with aminoalkoxide and various N-alkoxy-functionalized carboxamide ligands. The complexes, [ClSn(dmamp)]₂ (1), [BrSn(dmamp)]₂ (2), and [ISn(dmamp)]₂ (3), were prepared from the salt metathesis reaction of SnX₂ with one equivalent of dmamp; [Sn(dmamp)(empa)]₂ (4), [Sn(dmamp)(mdpa)]₂ (5), and [Sn(dmamp)(edpa)]₂ (6) were prepared via the salt metathesis reaction using complex 2 with one equivalent of N-alkoxy-functionalized carboxamide ligand. Complexes 1-5 displayed dimeric molecular structures with tin metal centers interconnected by μ₂-O bonding via the alkoxy oxygen atom. The molecular structures of complexes 1-5 showed distorted trigonal bipyramidal geometries with lone pair electrons in the equatorial position. Using complex 6 as a tin precursor, SnO _x films were deposited by chemical solution deposition (CSD) and subsequent post-deposition annealing (PDA) at high temperatures. SnO and SnO₂ films were selectively obtained under controlled PDA atmospheres of argon and oxygen, respectively. The SnO films featured a tetragonal romarchite structure with high crystallinity and a preferred growth orientation along the (101) plane. They also exhibited a lower transmittance of >52% at 400 nm due to an optical band gap of 2.9 eV. In contrast, the SnO₂ films exhibited a tetragonal cassiterite crystal structure and an extremely high transmittance of >97% at 400 nm was observed with an optical band gap of 3.6 eV.

Chemical Vapor Deposited Mixed Metal Halide Perovskite Thin Films

In this article, we used a two-step chemical vapor deposition (CVD) method to synthesize methylammonium lead-tin triiodide perovskite films, MAPb_1−xSn_xI₃, with x varying from 0 to 1. We successfully controlled the concentration of Sn in the perovskite films and used Rutherford backscattering spectroscopy (RBS) to quantify the composition of the precursor films for conversion into perovskite films. According to the RBS results, increasing the SnCl₂ source amount in the reaction chamber translate into an increase in Sn concentration in the films. The crystal structure and the optical properties of perovskite films were examined by X-ray diffraction (XRD) and UV-Vis spectrometry. All the perovskite films depicted similar XRD patterns corresponding to a tetragonal structure with I4cm space group despite the precursor films having different crystal structures. The increasing concentration of Sn in the perovskite films linearly decreased the unit volume from about 988.4 ų for MAPbI₃ to about 983.3 ų for MAPb₀.₃₉Sn₀.₆₁I₃, which consequently influenced the optical properties of the films manifested by the decrease in energy bandgap (E_g) and an increase in the disorder in the band gap. The SEM micrographs depicted improvements in the grain size (0.3–1 µm) and surface coverage of the perovskite films compared with the precursor films.

Formation of monomeric Sn(ii) and Sn(iv) perfluoropinacolate complexes and their characterization by 119Sn Mössbauer and 119Sn NMR spectroscopies

The synthesis and characterization of a series of Sn(ii) and Sn(iv) complexes supported by the highly electron-withdrawing dianionic perfluoropinacolate (pin^F) ligand are reported herein. Three analogs of [Sn^IV(pin^F)₃]^2- with NEt₃H⁺ (1), K⁺ (2), and {K(18C6)}⁺ (3) counter cations and two analogs of [Sn^II(pin^F)₂]^2- with K⁺ (4) and {K(15C5)₂}⁺ (5) counter cations were prepared and characterized by standard analytical methods, single-crystal X-ray diffraction, and ¹¹⁹Sn Mössbauer and NMR spectroscopies. The six-coordinate Sn^IV(pin^F) complexes display ¹¹⁹Sn NMR resonances and ¹¹⁹Sn Mössbauer spectra similar to SnO₂ (cassiterite). In contrast, the four-coordinate Sn^II(pin^F) complexes, featuring a stereochemically-active lone pair, possess low ¹¹⁹Sn NMR chemical shifts and relatively high quadrupolar splitting. Furthermore, the Sn(ii) complexes are unreactive towards both Lewis bases (pyridine, NEt₃) and acids (BX₃, Et₃NH⁺). Calculations confirm that the Sn(ii) lone pair is localized within the 5s orbital and reveal that the Sn 5p_x LUMO is energetically inaccessible, which effectively abates reactivity.

Supercritical CO2 Processing Generates Aqueous Cisplatin Solutions with Enhanced Cancer Specificity

Cisplatin is a highly toxic material used clinically as a potent chemotherapeutic. While effective against some cancers, toxicity limits widespread use and low solubility confounds delivery. To formulate a better tolerated and more water-soluble form of cisplatin, we designed a rapid expansion of supercritical solutions (RESS) technique with supercritical carbon dioxide (sc-CO₂) to collect nanoclusters of cisplatin embedded in dry ice, in a dual-stage collection vessel cooled to liquid nitrogen temperature. These nanoclusters were solubilized in deionized water and further concentrated (up to 51.3 mM) by a Rotovap process, yielding stable cisplatin solutions with solubility up to 15 × (w/w) greater than that of normal cisplatin. Extensive material characterizations of the solutions were carried out to determine any chemical and/or structural changes of the RESS-processed cisplatin. In vitro cytotoxicity studies of these aqueous solutions showed increased cell viability and early apoptosis compared to equivalent concentrations of standard cisplatin solutions. In vivo studies using zebrafish embryos revealed that standard cisplatin solutions were acutely toxic and caused death of rapidly proliferating cells compared to RESS-processed cisplatin, which were better tolerated with reduced general cell death. Increased water solubility and matched chemical identity of RESS-processed aqueous cisplatin solutions indicate the potential to open up novel drug-delivery routes, which is beneficial for new pharmaceutical design and development.