Fmoc-phenylalanine displays antibacterial activity against Gram-positive bacteria in gel and solution phases

Development of Biginelli-based ZnO-coupled carbomer-gel-coated wound dressing gauze with enhanced antibacterial activity

A multicomponent Biginelli reaction was used to produce biologically active dihydropyrimidones that were then combined with ZnO nanoparticles. Biginelli compounds synthesized with various alkyl chains were characterized using high-resolution mass spectrometry as well as 1H- and 13C-NMR spectroscopy. Efficient antibacterial gels were developed by introducing the prepared Biginelli compounds and ZnO nanoparticles into a carbomer polymer matrix. Antibacterial screening revealed that the ABS-G4 gel exhibited the highest antibacterial potential, with minimum inhibitory concentrations of 16 ± 2 and 12 ± 2 μg mL-1 against Escherichia coli and Staphylococcus aureus, respectively. The ABS-G4 gel was characterized using rheological studies, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, powder X-ray diffraction, and atomic force microscopy. The ABS-G4 gel was showing more antibacterial efficacy toward Gram-positive strains of bacteria than Gram-positive ones. An antibacterial dressing was formed by coating the developed gel onto a gauze dressing.

Fmoc-conjugated dipeptide-based hydrogels and their pH-tuneable behaviour

In this work, we designed three dipeptide-based hydrogelators by attaching different hydrophilic amino acids (aspartic acid, glutamic acid, and glutamine) to Fmoc-conjugated phenylalanine. Self-assembly and gelation of the three dipeptides were studied in 50 mM phosphate buffer solutions. The gelation efficiency and kinetics of glutamine-based hydrogelators (FQ) were better than those of aspartic acid and glutamic acid-based hydrogelators FD and FE respectively at neutral pH. The lower gelation efficiency of FE and FD was due to the pH-responsive side chain (carboxylic acid) compared to FQ, where amide group was present as a side chain. Three hydrogelators exhibited better gelation efficiency at lower pHs as the anionic carboxylate group was protonated to the carboxylic group, facilitating better self-assembly and gelation processes. Thioflavin-T (ThT) binding study of hydrogels indicated the formation of β-sheet-like structure in the hydrogel state. The self-assembly process was inspected using molecular dynamic study, revealing that the newly developed FQ gelator possesses a higher aggregation tendency than FE and FD. Finally, these peptide-based injectable biomaterials were examined using fluorescence and FT-IR spectroscopy, scanning electron microscopy, and rheology.

Effect of Chirality and Amphiphilicity on the Antimicrobial Activity of Tripodal Lysine-Based Peptides

A series of tripodal (three-arm) lysine-based peptides were designed and synthesized and their self-assembly properties in aqueous solution and antimicrobial activity were investigated. We compare the behaviors of homochiral tripodal peptides (KKY)3K and a homologue containing the bulky aromatic fluorenylmethoxycarbonyl (Fmoc) group Fmoc-(KKY)3K, and heterochiral analogues containing k (d-Lys), (kkY)3K and Fmoc-(kkY)3K. The molecular conformation and self-assembly in aqueous solutions were probed using various spectroscopic techniques, along with small-angle X-ray scattering (SAXS) and cryogenic-transmission electron microscopy (cryo-TEM). In cell viability assays using fibroblast cell lines, the tripodal peptides without Fmoc were observed to be noncytotoxic over the concentration range studied, and the Fmoc functionalized tripodal peptides were only cytotoxic at the highest concentrations (above the critical aggregation concentration of the lipopeptides). The molecules also show good hemocompatibility at sufficiently low concentration, and antimicrobial activity was assessed via MIC (minimum inhibitory concentration) and MBC (minimum bactericidal concentration) assays. These revealed that the Fmoc-functionalized tripodal peptides had significant activity against both Gram-negative and Gram-positive bacteria, and in the case of Gram-positive Staphylococcus aureus, the antimicrobial activity for Fmoc-(kkY)3K was improved compared to polymyxin B. The mechanism of the antimicrobial assay was found to involve rupture of the bacterial membrane as evident from fluorescence microscopy live/dead cell assays, and scanning electron microscopy images.

Boc-Protected Phenylalanine and Tryptophan-Based Dipeptides: A Broad Spectrum Anti-Bacterial Agent

Dipeptides were constructed using hydrophobic amino acid residues following AMP prediction. After that Boc-modification was performed on the screened peptides and finally Boc-Phe-Trp-OMe and Boc-Trp-Trp-OMe were synthesized. Even though no inhibition zones were observed in agar well diffusion assays, minimum inhibitory concentration (MIC) analysis revealed anti-bacterial activity against both Gram-positive and Gram-negative bacteria, with MIC90 ranging from 230 to 400 μg/mL. The crystal violet assay confirmed the dipeptides' biofilm eradication and disruption capabilities. Furthermore, membrane permeabilization assays indicated outer and inner membrane permeabilization, while SEM analysis revealed the formation of fibril and spherical nanostructures, likely contributing to this effect. The peptides also exhibited resistance to protein adsorption, non-cytotoxicity, and non-hemolytic properties, making them promising broad-spectrum anti-bacterial agents with biofilm eradication and disruption potential. This study concludes that Boc-protected phenylalanine- and tryptophan-based dipeptides can self-assemble and can be used as broad-spectrum anti-bacterial agents. The self-assembly of these peptides offers a versatile platform for designing biomaterials with tailored properties and functionalities. Research exploring the anti-bacterial potential of Boc-protected dipeptides has been limited, prompting our investigation to shed light on this overlooked area. Our analysis of synthesized Boc-protected dipeptides revealed notable anti-bacterial activity, marking a significant advancement. This finding suggests that these dipeptides could emerge as potent, broad-spectrum anti-bacterial agents, addressing the urgent need for effective treatments against bacterial resistance and opening new avenues in therapy. This study not only enhances our understanding of these dipeptides but also highlights their potential as innovative and efficacious anti-bacterial agents, making a substantial impact in the clinical field.

Boosting Supramolecular Gelation Efficiency and Properties: Ionic Strength as a Key to Superior Hydrogels

Controlling the minimum gelation concentration (MGC) of low molecular weight (LMW) hydrogelators is a key for modulating gel properties, such as mechanical strength, viscoelasticity, and stability, which are crucial for applications ranging from drug delivery to tissue engineering. However, tweaking the MGC under specific conditions, such as pH and/or temperature, poses a considerable challenge. Herein, we varied the ionic strength of buffer solutions using NaCl for several LMW hydrogelators, including Fmoc-Phe, Fmoc-Tyr, Fmoc-Trp, Fmoc-Met, and Fmoc-Cha, and assessed their gelation efficiency at pH 7.4 and ambient temperature. Interestingly, Fmoc-Phe demonstrated a ∼67% (3-fold) MGC reduction, from 0.24 to 0.08 wt %, at 500 mM NaCl, transforming it a "super hydrogelator" (MGC < 0.1 wt %), while Fmoc-Trp showed 60% MGC reduction. Higher ionic strength effectively shields the electrostatic repulsion between negatively charged (-COO-) groups on the Fmoc-Phe, promoting closer aggregation and more efficient self-assembly and allowing for gelation at lower concentrations. In contrast, Fmoc-Met, Fmoc-Cha, and Fmoc-Tyr precipitated in the presence of NaCl, suggesting that NaCl specifically modulates the MGC of Fmoc-amino acid gelators containing unsubstituted aromatic side chains. Furthermore, these results indicate that cation-π interactions likely play a role, alongside carboxylic acid neutralization. While Fmoc-Phe forms gels in the presence of other monovalent cations, it does not form a hydrogel in the presence of divalent (CaCl2) and trivalent (AlCl3), indicating that enhancement of hydrogelation is specific to monovalent cations. Although the fibrillar structure of Fmoc-Phe hydrogels remained consistent, addition of NaCl increased fibril stickiness, creating densely packed networks that modulate the mechanical strength. Unlike typical cases where increased ionic strength leads to precipitation, Fmoc-Phe gelation at high NaCl concentrations (150-500 mM) is significant, yielding a robust supramolecular hydrogel that remains stable in high ionic-strength environments. This outcome suggests that ionic strength could be a valuable factor to enhance the efficient gelation of LMW hydrogelators.

Enhancing Antibacterial Properties of Titanium Implants through Covalent Conjugation of Self-Assembling Fmoc-Phe-Phe Dipeptide on Titania Nanotubes

Bacterial infections and biofilm formation are significant challenges for medical implants. While titanium nanotube engineering improves biocompatibility, it cannot prevent bacterial adhesion and biofilm formation. Optimizing the biomaterial's surface chemistry is vital for its desired functioning in the biological environment. This study demonstrates the covalent conjugating of the self-assembling dipeptide N-fluorenylmethyloxycarbonyl-diphenylalanine (Fmoc-FF) onto titanium nanotube surfaces (TiNTs) without altering the topography. Fmoc-FF peptides, in conjugation with TiNTs, can inhibit biofilm formation, eradicate pre-existing biofilms, and kill bacteria. This functionalization imparts antibacterial properties to the surface while retaining beneficial nanotube topography, synergistically enhancing bioactivity. Surface characterization by XPS, FT-IR, EDS, and SEM confirmed the successful functionalization. Bacterial adhesion experiments showed a significantly improved antibacterial activity of the functionalized TiNT surfaces. This study opens future possibilities for associating biomedical applications such as cell-cell interactions, tissue engineering, and controlled drug delivery of multifunctional self-assembling short peptides with implant materials through surface functionalization.

Antibiofilm and antivirulence potentials of iodinated fmoc-phenylalanine against Staphylococcus aureus

Staphylococcus aureus poses significant risks to public health due to its ability to form biofilm and produce virulence factors, contributing to the increase in antibiotic resistance and treatment complications. This emphasizes the urgent need for novel antimicrobial controls. Based on the premise that halogenation improves antimicrobial efficacy, this study investigated the ability of halogenated phenylalanine to effectively inhibit S. aureus biofilm formation and virulence activities. Among 29 halogenated compounds, Fmoc-4-iodo-phenylalanine (Fmoc-Iodo-Phe) displayed the highest antibiofilm effect against S. aureus, achieving 94.3 % reduction at 50 μg/mL. Microscopic studies confirmed its ability to prevent and disrupt mature biofilms. At 10 μg/mL, Fmoc-Iodo-Phe markedly inhibited virulence factors, such as cell surface hydrophobicity, hemolysin and slime production. It showed low propensity for resistance development and effectively inhibited biofilms formed by methicillin-resistant S. aureus (MRSA) and S. epidermidis, but was inactive against Gram-negative bacteria. Gene expression analysis complemented by molecular docking suggest that Fmoc-Iodo-Phe could target the AgrA quorum sensing cascade due to strong interactions with key residues at its DNA binding sites. Notably, it was non-cytotoxic in Caenorhabditis elegans model and satisfied drug-likeliness criteria based on ADMET prediction. Therefore, our findings position Fmoc-Iodo-Phe as a promising antimicrobial candidate against S. aureus infections, underscoring its potential as an alternative to traditional antibiotics.

A broad-spectrum antibacterial hydrogel based on the synergistic action of Fmoc-phenylalanine and Fmoc-lysine in a co-assembled state

Multicomponent biomolecular self-assembly is fundamental for accomplishing complex functionalities of biosystems. Self-assembling peptides, amino acids, and their conjugates serve as a versatile platform for developing biomaterials. However, the co-assembly of multiple building blocks showing synergistic interplay between individual components and producing biomaterials with emergent functional attributes is much less explored. In this study, we have formulated minimalistic co-assembled hydrogels composed of Fmoc-phenylalanine and Fmoc-lysine. The co-assembled systems display broad-spectrum antimicrobial potency, a feature absent in individual building blocks. A comprehensive biophysical analysis demonstrates the physicochemical features of the hydrogels eliciting the antibacterial response. MD simulation further reveals a unique fibrillar architecture with Fmoc-phenylalanine forming the fibril core surrounded by positively charged Fmoc-lysine surface residues, thereby enhancing the interaction with negatively charged bacterial membranes, causing membrane disruption and cell death. Thus, this study provides molecular-level insight into the emergent properties of a multicomponent system, affording an excellent paradigm for developing novel biomaterials.

Antibacterial Hydrogels for Wound Dressing Applications: Current Status, Progress, Challenges, and Trends

Bacterial infection treatment for chronic wounds has posed a major medical threat and challenge. Bacteria at the wounded sites can compete with the immune system and subsequently invade live tissues, leading to more severe tissue damage. Therefore, there is an urgent demand for wound dressings with antibacterial and anti-inflammatory properties. Considering the concept of moist healing, hydrogels with a three-dimensional (3D) network structure are widely used as wound dressings due to their excellent hydrophilicity, water retention properties, and biocompatibility. Developing antibacterial hydrogels for the treatment of infected wounds has been receiving extensive attention recently. This article categorizes antibacterial hydrogels according to their materials and antibacterial modes, and introduces the recent findings and progress regarding their status. More importantly, with the development of emerging technologies, new therapies are utilized to prepare antibacterial hydrogels such as nanoenzymes, photothermal therapy (PTT), photodynamic therapy (PDT), metal-organic frameworks (MOFs), and other external stimuli-responsive methods. Therefore, this review also examines their progress, challenges, and future trends as wound dressings. In the following studies, there will still be a focus on antibacterial hydrogels that have a high performance, multi-functions, and intelligence, especially biocompatibility, a high and long-lasting antibacterial property, responsiveness, and on-demand therapeutic ability.

A co-assembly process for high strength and injectable dual network gels with sustained doxorubicin release performance

Adopting a non-covalent co-assembly strategy shows great potential in loading drugs efficiently and safely in drug delivery systems. However, finding an efficient method for developing high strength gels with thixotropic characteristics is still challenging. In this work, by hybridizing the low molecular weight gelator fluorenylmethyloxycarbonyl-phenylalanine (Fmoc-F) (first single network, 1st SN) and alginate (second single network, 2nd SN) into a dual network (DN) gel, gels with high strength as well as thixotropy were prepared efficiently. The DN gels showed high strength (103 Pa in SN gels and 105 Pa in DN gels) and thixotropic characteristics (yield strain <25%; recovery ratio >85% within 100 seconds). The application performance was verified by loading doxorubicin (DOX), showing better encapsulation capacity (77.06% in 1st SN, 59.11% in 2nd SN and 96.71% in DN) and sustained release performance (lasting one week under physiological conditions) than single network gels. Experimental and DFT results allowed the elaboration of the specific non-covalent co-assembly mechanism for DN gel formation and DOX loading. The DN gels were formed by co-assembly driven by H-bond and π-π stacking interactions and then strengthened by Ca2+-coupling. Most DOX molecules co-assembled with Fmoc-F and alginate through π-π stacking and H-bond interactions (DOX-I), with a few free DOX molecules (DOX-II) left. Proven by the release dynamics test, DOX was released through a diffusion-erosion process, in an order of DOX-I first and then DOX-II. This work suggests that non-covalent co-assembly is a useful technique for effective material strengthening and drug delivery.

Antimicrobial therapy based on self-assembling peptides

The emergence of drug-resistant microorganisms has threatened global health, and microbial infections have severely limited the use of medical materials. For example, the attachment and colonization of pathogenic bacteria to medical implant materials can lead to wound infections, inflammation and complications, as well as implant failure, shortening their lifespan and even resulting in patient death. In the era of antibiotic resistance, antimicrobial drug discovery needs to prioritize unconventional therapies that act on new targets or adopt new mechanisms. In this regard, supramolecular antimicrobial peptides have emerged as attractive therapeutic platforms, both as bactericides for combination antibiotics and as delivery vehicles. By taking advantage of their programmable intermolecular and intramolecular interactions, peptides can be modified to form higher-order structures (including nanofibers and nanoparticles) with unique functionality. This paper begins with an analysis of the relationship between peptide self-assembly and antimicrobial activity, describes in detail the research and development of various self-assembled antimicrobial peptides in recent years, and finally explores different combinatorial strategies for self-assembling antimicrobial peptides.

Evaluation of Pharmacokinetic and Pharmacodynamic (PK/PD) of Novel Fluorenylmethoxycarbonyl- Phenylalanine Antimicrobial Agent

OBJECTIVE

To assess the pharmacokinetic profile, in-vivo toxicity, and efficacy of 9-Fluorenylmethoxycarbonyl-L-phenylalanine (Fmoc-F) as a potential antibacterial agent, with a focus on its suitability for clinical translation.

METHODS

An RP-HPLC-based bio-analytical method was developed and qualified to quantify Fmoc-F levels in mouse plasma for pharmacokinetic analysis. Oral bioavailability was determined, and in-vivo toxicity was evaluated following intra-peritoneal administration. Efficacy was assessed by measuring the reduction in Staphylococcus aureus burden and survival rates in BALB/c mice.

RESULTS

The RP-HPLC method is highly sensitive, detecting as low as 0.8 µg mL-1 (~ 2 µM) of Fmoc-F in blood plasma. This study revealed that Fmoc-F has an oral bioavailability of 65 ± 18% and suitable pharmacokinetic profile. Further, we showed that intra-peritoneal administration of Fmoc-F is well tolerated by BALB/c mice and Fmoc-F treatment (100 mg/kg, i.p.) significantly reduces Staphylococcus aureus burden from visceral organs in BALB/c mice but falls short in enhancing survival rates at higher bacterial loads.

CONCLUSIONS

The study provides crucial insights into the pharmacokinetic and pharmacodynamic properties of Fmoc-F. The compound displayed favourable oral bioavailability and in-vivo tolerance. Its significant reduction of bacterial burden underscores its potential as a treatment for systemic infections. However, limited effectiveness for severe infections, short half-life, and inflammatory response at higher doses need to be addressed for its clinical application.

Current status of development and biomedical applications of peptide-based antimicrobial hydrogels

Microbial contamination poses a serious threat to human life and health. Through the intersection of material science and modern medicine, advanced bionic hydrogels have shown great potential for biomedical applications due to their unique bioactivity and ability to mimic the extracellular matrix environment. In particular, as a promising antimicrobial material, the synthesis and practical biomedical applications of peptide-based antimicrobial hydrogels have drawn increasing research interest. The synergistic effect of peptides and hydrogels facilitate the controlled release of antimicrobial agents and mitigation of their biotoxicity while achieving antimicrobial effects and protecting the active agents from degradation. This review reports on the progress and trends of researches in the last five years and provides a brief outlook, aiming to provide theoretical background on peptide-based antimicrobial hydrogels and make suggestions for future related work.

Bioinspired Amino Acid Based Materials in Bionanotechnology: From Minimalistic Building Blocks and Assembly Mechanism to Applications

Inspired by natural hierarchical self-assembly of proteins and peptides, amino acids, as the basic building units, have been shown to self-assemble to form highly ordered structures through supramolecular interactions. The fabrication of functional biomaterials comprised of extremely simple biomolecules has gained increasing interest due to the advantages of biocompatibility, easy functionalization, and structural modularity. In particular, amino acid based assemblies have shown attractive physical characteristics for various bionanotechnology applications. Herein, we propose a review paper to summarize the design strategies as well as research advances of amino acid based supramolecular assemblies as smart functional materials. We first briefly introduce bioinspired reductionist design strategies and assembly mechanism for amino acid based molecular assembly materials through noncovalent interactions in condensed states, including self-assembly, metal ion mediated coordination assembly, and coassembly. In the following part, we provide an overview of the properties and functions of amino acid based materials toward applications in nanotechnology and biomedicine. Finally, we give an overview of the remaining challenges and future perspectives on the fabrication of amino acid based supramolecular biomaterials with desired properties. We believe that this review will promote the prosperous development of innovative bioinspired functional materials formed by minimalistic building blocks.

Simvastatin-Releasing Nanofibrous Peptide Hydrogels for Accelerated Healing of Diabetic Wounds

Wound healing is one of the major global health concerns in diabetic patients. Simvastatin (SMV) is a poorly soluble oral cholesterol-lowering drug that may aid diabetic wound healing. In the current study, a thixotropic peptide hydrogel of Fmoc-diphenylalanine (FmocFF) containing SMV was designed to accelerate skin wound healing effectively and safely in diabetic mice. FmocFF hydrogels were prepared at various concentrations by using the solvent-triggering technique and characterized by spectroscopic methods such as attenuated total reflection Fourier transform infrared (FT-IR) spectroscopy and fluorimetry. Mechanical behaviors were explored by oscillatory rheology. In model mice, the regenerative potential of the FmocFF-SMV hydrogel was evaluated in terms of wound contraction and closure, tissue regeneration, acute and chronic inflammation, granulation, and re-epithelization. The results showed that FmocFF-SMV hydrogels had an entangled nanofibrous microstructure and shear-thinning characteristics. FmocFF-SMV demonstrated a sustained drug release over 7 days. Compared to the unloaded FmocFF hydrogel, treatment with FmocFF-SMV led to superior diabetic wound recovery and reduced inflammation. Therefore, the utilization of the sustained-release FmocFF-SMV hydrogel formulation could become an attractive choice for topical wound therapy in diabetes patients.

Constructing ROS-Responsive Supramolecular Gel with Innate Antibacterial Properties

Bacterial infections, especially antibiotic-resistant bacterial infections, pose a significant threat to human health. Supramolecular gel with innate antibacterial properties is an advanced material for the treatment of bacterial infections, which have attracted great attention. Herein, a reactive oxygen species (ROS)-responsive innate antibacterial supramolecular gel is developed by a bottom-up approach based on phenylalanine and hydrazide with innate antibacterial properties. The structure of gelators and intermediate products was characterized by proton nuclear magnetic resonance (1H NMR) and a high-resolution mass spectrum (HRMS). The results of 1H NMR and the Fourier transform infrared spectrum (FT-IR) experiment disclosed that hydrogen bonding and the π-π stacking force are the important self-assembly driving forces of gelators. The microstructure and mechanical properties of gel were studied by Scanning electron microscope (SEM) and Rheometer, respectively. An in vitro degradation experiment proved that the gelator has ROS-responsive degradation properties. The in vitro drug release experiment further manifested that antibiotic-loaded gel has ROS-responsive drug-release performances. An in vitro cytotoxicity experiment showed that the supramolecular gel has good biocompatibility and could promote cell proliferation. The in vitro antibacterial experiment proved that the supramolecular gel has excellent inherent antibacterial properties, and the antibacterial rate against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was 98.6% and 99.1%, respectively. The ROS-responsive supramolecular gel as a novel antibacterial agent has great application prospects in treating antibiotic-resistant bacterial-infected wounds and preventing the development of bacterial resistance.

Peptide hydrogels: Synthesis, properties, and applications in food science

Due to the unique and excellent biological, physical, and chemical properties of peptide hydrogels, their application in the biomedical field is extremely wide. The applications of peptide hydrogels are closely related to their unique responsiveness and excellent properties. However, its defects in mechanical properties, stability, and toxicity limit its application in the food field. In this review, we focus on the fabrication methods of peptide hydrogels through the physical, chemical, and biological stimulations. In addition, the functional design of peptide hydrogels by the incorporation with materials is discussed. Meanwhile, the excellent properties of peptide hydrogels such as the stimulus responsiveness, biocompatibility, antimicrobial properties, rheology, and stability are reviewed. Finally, the application of peptide hydrogel in the food field is summarized and prospected.

Yttrium Oxide Nanoparticle-Loaded, Self-Assembled Peptide Gel with Antibacterial, Anti-Inflammatory, and Proangiogenic Properties for Wound Healing

Chronic wounds are a major healthcare challenge owing to their complex healing mechanism and number of impediments to the healing process, like infections, unregulated inflammation, impaired cellular functions, poor angiogenesis, and enhanced protease activity. Current topical care strategies, such as surgical debridement, absorption of exudates, drug-loaded hydrogels for infection and inflammation management, and exogenous supply of growth factors for angiogenesis and cell proliferation, slow the progression of wounds and reduce patient suffering but suffer from low overall cure rates. Therefore, we have developed a proteolytically stable, multifunctional nanoparticle loaded-peptide gel with inherent anti-inflammatory, antibacterial, and pro-angiogenic properties to provide a favorable wound healing milieu by restoring impaired cellular functions. We have fabricated a self-assembled, lauric acid-peptide conjugate gel, LA-LLys-DPhe-LLys-NH2, loaded with yttrium oxide (Y2O3) nanoparticles (NLG). Gel formed a nanofibrous structure, and nanoparticles were passively entrapped within the network. The surface morphology, stability, viscoelastic, and self-healing characteristics of gels were characterized. It showed a high stability against degradation by proteolytic enzymes and highly potent antibacterial activities against E. coli and S. aureus due to the presence of positively charged side chains of lysine in the peptide chain. It also exhibited an excellent antioxidant activity as well as ability to stimulate cell proliferation in murine fibroblast (L929) cells and human umbilical vein endothelial cells (HUVECs). The incorporation of nanoparticles promoted angiogenesis by upregulating pro-angiogenic genes, vascular endothelial growth factor (VEGF), fibroblast growth factor (FGF2), and epidermal growth factor (EGFR), and the gel caused complete wound closure in cells. In summary, the Y2O3 nanoparticle-loaded lauric acid-peptide conjugate gel is able to elicit the desired tissue regeneration responses and, therefore, has a strong potential as a matrix for the treatment of chronic wounds.

Diversity at the nanoscale: laser-oxidation of single-layer graphene affects Fmoc-phenylalanine surface-mediated self-assembly

We report the effects of a laser-oxidized single layer graphene (SLG) surface on the self-assembly of amphiphilic gelator N-fluorenylmethoxycarbonyl-L-phenylalanine (Fmoc-Phe) towards an gel-SLG interface. Laser oxidation modulates the levels of hydrophobicity/hydrophilicity on the SLG surface. Atomic force, scanning electron, helium ion and scattering scanning nearfield optical microscopies (AFM, SEM, HIM, s-SNOM) were employed to assess the effects of surface properties on the secondary and tertiary organization of the formed Fmoc-Phe fibres at the SLG-gel interface. S-SNOM shows sheet-like secondary structures on both hydrophobic/hydrophilic areas of SLG and helical or disordered structures mainly on the hydrophilic oxidized surface. The gel network heterogeneity on pristine graphene was observed at the scale of single fibres by s-SNOM, demonstrating its power as a unique tool to study supramolecular assemblies and interfaces at nanoscale. Our findings underline the sensitivity of assembled structures to surface properties, while our characterization approach is a step forward in assessing surface-gel interfaces for the development of bionic devices.

Probing the Gelation Synergies and Anti-Escherichia coli Activity of Fmoc-Phenylalanine/Graphene Oxide Hybrid Hydrogel

The N-fluorenyl-9-methyloxycarbonyl (Fmoc)-protected amino acids have shown high antimicrobial application potential, among which the phenylalanine derivative (Fmoc-F) is the most well-known representative. However, the activity spectrum of Fmoc-F is restricted to Gram-positive bacteria only. The demand for efficient antimicrobial materials expanded research into graphene and its derivatives, although the reported results are somewhat controversial. Herein, we combined graphene oxide (GO) flakes with Fmoc-F amino acid to form Fmoc-F/GO hybrid hydrogel for the first time. We studied the synergistic effect of each component on gelation and assessed the material's bactericidal activity on Gram-negative Escherichia coli (E. coli). GO flakes do not affect Fmoc-F self-assembly per se but modulate the elasticity of the gel and speed up its formation. The hybrid hydrogel affects E. coli survival, initially causing abrupt bacterial death followed by the recovery of the surviving ones due to the inoculum effect (IE). The combination of graphene with amino acids is a step forward in developing antimicrobial gels due to their easy preparation, chemical modification, graphene functionalization, cost-effectiveness, and physicochemical/biological synergy of each component.

Effect of number of lysine motifs on the bactericidal and hemolytic activity of short cationic antimicrobial peptides

Antimicrobial peptides (AMPs) are vital components of the nonspecific immune system that represent a promising broad-spectrum alternative to conventional antibiotics. Several short cationic antimicrobial peptides show highly effective antibacterial activity and low hemolytic activity, which are based on the action of a few critical amino acids, such as phenylalanine (F) and lysine (K). Previous studies have reported that Fmoc-based phenylalanine peptides possess appreciable antibacterial potency against Gram-positive bacteria, but their ability to kill Gram-negative bacteria was suboptimal. In this study, we designed and prepared a series of Fmoc-K_nF peptide (n = 1-3) series by adding lysine motifs to strengthen their broad-spectrum antibacterial activity. The effect was investigated that the amount of lysine in Fmoc-F peptides on their antibacterial properties and hemolytic activities. Our results showed that the Fmoc-KKF peptide holds the strongest antimicrobial activity against both Gram-positive and negative bacteria among all designed peptides, as well as low hemolytic activity. These results provide support for the general strategy of enhancing the broad-spectrum antibacterial activity of AMPs through increased lysine content.

Design of Fmoc-Phenylalanine Nanofibrillar Hydrogel and Mechanistic Studies of Its Antimicrobial Action against Both Gram-Positive and Gram-Negative Bacteria

In pursuit of efficient antimicrobial agents, biomaterials such as hydrogels have drawn a considerable amount of attention due to their numerous advantages such as a high degree of hydration, biocompatibility, stability, and direct application at an infectious site. Particularly, biomaterials such as hydrogels based on Fmoc-protected peptides and amino acids have proven to be immensely advantageous. Such biomaterials can undergo gelation by simple pH modulation and can be used for various biological applications. Keeping this in mind, in this work, we reported the synthesis of Fmoc-phenylalanine (Fmoc-F)-based hydrogels using trisodium citrate as a pH modulator and compared them with the previously reported pH modulator glucono-δ-lactone. The gels were compared using various characterization techniques such as rheometry, field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), small angle X-ray scattering (SAXS), FT-IR, thioflavin T (ThT) binding assay, and zeta potential studies. These studies highlighted the role of pH modulators in affecting various parameters such as the ability to alter the zeta potential of the nanofibrils, improve their bactericidal action, reduce the amyloidic characters, shift the lattice packing from amorphous to crystalline, and introduce fluorescence and thermoreversibility. Interestingly, this is the first report where the Fmoc-F-based hydrogel has been shown to be effective against Gram-negative bacteria along with Gram-positive bacteria as well. Additionally, the mechanism of antimicrobial action was investigated using docking and antioxidant studies.

Hemostatic effects of FmocF-ADP hydrogel consisted of Fmoc-Phenylalanine and ADP

During trauma and surgery, bleeding is a major concern. One of the crucial strategies for hemostasis is the use of biological hemostatic material. Herein, we reported an amino acid-based hydrogel FmocF-ADP hydrogel, which consisted of N-[(9H-fluoren-9-ylmethoxy) carbonyl]-3-phenyl-L-alanine (FmocF) and adenosine diphosphate (ADP) sodium solution. The hydrogel was created by FmocF self-assembling to nanofiber in ADP sodium solution and then cross-linking to hydrogel. FmocF-ADP hydrogel showed good in vitro coagulation activity as measured by whole blood clotting assays, platelet clotting assays, platelet activation assays, and platelet adhesion assays. Further, it was noted to reveal an exceptional in vivo hemostatic effect in a mouse liver bleeding model. Together with the previous report of the good biocompatibility and antimicrobial activity of FmocF hydrogel, our study would extend the biomedical application of FmocF hydrogel. In conclusion, the present study would provide a constructive strategy for the development of new antimicrobial and hemostatic materials or develop a potential hemostatic material.

Hydrogels with intrinsic antibacterial activity prepared from naphthyl anthranilamide (NaA) capped peptide mimics

In this study, we prepared antibacterial hydrogels through the self-assembly of naphthyl anthranilamide (NaA) capped amino acid based cationic peptide mimics. These ultra-short cationic peptide mimics were rationally designed with NaA as a capping group, L-phenylalanine, a short aliphatic linker, and a cationic group. The synthesized peptide mimics efficiently formed hydrogels with minimum gel concentrations between 0.1 and 0.3%w/v. The resulting hydrogels exhibited desirable viscoelastic properties which can be tuned by varying the cationic group, electronegative substituent, or counter anion. Importantly, nanofibers from the NaA-capped cationic hydrogels were found to be the source of hydrogels' potent bacteriacidal actvity against both Gram-positive and Gram-negative bacteria while remaining non-cytotoxic. These intrinsically antibacterial hydrogels are ideal candidates for further development in applications where bacterial contamination is problematic.

Anion Effects on the Supramolecular Self-Assembly of Cationic Phenylalanine Derivatives

Supramolecular hydrogels have emerged as a class of promising biomaterials for applications such as drug delivery and tissue engineering. Self-assembling peptides have been well studied for such applications, but low molecular weight (LMW) amino acid-derived gelators have attracted interest as low-cost alternatives with similar emergent properties. Fluorenylmethyloxycarbonyl-phenylalanine (Fmoc-Phe) is one such privileged motif often chosen due to its inherent self-assembly potential. Previously, we developed cationic Fmoc-Phe-DAP gelators that assemble into hydrogel networks in aqueous NaCl solutions of sufficient ionic strength. The chloride anions in these solutions screen the cationic charge of the gelators to enable self-assembly to occur. Herein, we report the effects of varying the anions of sodium salts on the gelation potential, nanoscale morphology, and hydrogel viscoelastic properties of Fmoc-Phe-DAP and two of its fluorinated derivatives, Fmoc-3F-Phe-DAP and Fmoc-F₅-Phe-DAP. It was observed that both the anion identity and gelator structure had a significant impact on the self-assembly and gelation properties of these derivatives. Changing the anion identity resulted in significant polymorphism of the nanoscale morphology of the assembled states that was dependent on the chemical structure of the gelator. The emergent viscoelastic character of the hydrogel networks was also found to be reliant on the anion identity and gelator structure. These results demonstrate the complex interplay between the gelator and environment that have a profound and often unpredictable impact on both self-assembly properties and emergent viscoelasticity in supramolecular hydrogels formed by LMW compounds. This work also illustrates the current lack of understanding that limits the rational design of potential biomaterials that will be in contact with complex biological fluids and provides motivation for additional research to correlate the chemical structure of LMW gelators with the structure and emergent properties of the resulting supramolecular assemblies as a function of environment.

Self-Assembled Peptide Hydrogel for Accelerated Wound Healing: Impact of N-Terminal and C-Terminal Modifications

Wound dressings are required to provide a moist environment for wounds, protect against invading infections, expedite tissue regeneration, and improve wound healing efficiency. Developing biomaterials with all aforesaid properties is still a big challenge. However, peptide-based hydrogels have the potential to overcome these challenges as they are biocompatible, biodegradable as well as have the ability to mimic the extracellular matrix and provide an appropriate moist environment which is important for wound healing. With this in mind, we report the preparation and comparison of three hexapeptide-based hydrogels, LIVAGD, with the aim to understand the importance of the N-terminal protecting group as well as the C-terminal amino acid substitution on its various biological efficacies. Fmoc and acetyl groups were used for N-terminal peptide protection, while aspartic acid was substituted with lysine at the C-terminus. The resulting peptide-based hydrogels were compared. Fmoc peptide-based hydrogels exhibited efficient anti-inflammatory action along with improved biocompatibility while lysine provided enhanced antibacterial effect to the hydrogel. Additionally, in vivo efficacy was examined using a mouse model, and Fmoc hydrogels demonstrated an improved wound healing ability with ∼40 % faster healing rate in comparison to the reported acetylated peptide hydrogels.

Antibacterial hydrogels of aromatic tripeptides

Self-assembled peptide hydrogels have emerged as alternatives to the conventional approaches employed in controlled drug release, wound-healing, and drug delivery, and as anti-infective agents. However, peptide hydrogels possessing antibacterial properties are less explored. In this work, we have designed three ultrashort antibacterial peptide hydrogels: Fmoc-FFH-CONH₂, Fmoc-FHF-CONH₂, and Fmoc-HFF-CONH₂. The rheological study showed the higher storage modulus of Fmoc-FFH-CONH₂ (30.43 kPa) compared to Fmoc-FHF-CONH₂ and Fmoc-HFF-CONH₂, which may be attributed to the enhanced aromatic interaction in Fmoc-FFH-CONH₂ compared to the other two variants, resulting in more mechanical rigidity. Further, the prepared hydrogels were evaluated for their inherent antibacterial potency against Gram-positive (Staphylococcus aureus, strain MTCC 96) and Gram-negative (Pseudomonas aeruginosa, strain PA01) bacteria. Antibacterial experiments demonstrated the potency of the hydrogels in the order of Fmoc-FFH-CONH₂ > Fmoc-FHF-CONH₂ > Fmoc-HFF-CONH₂. The antibacterial effect of the hydrogels was predominantly due to the osmotic stress and membrane disruption, which was verified by reactive oxygen species (ROS) generation and outer membrane permeabilization assays. Our findings point to the scope of using the synthesized peptide hydrogels as agents for topical applications.

Utilization of FMOC-3F-PHE hydrogel for encapsulation of Zanthoxylum armatum and Cinnamomum camphora oil for enhancing their antibacterial activity

Objective

While essential oils have many applications in medicine, not many studies have been done in the past to address issues of active targeting, enhancing bioavailability and reducing toxicity at higher concentrations. Herein, we used Fmoc-3F-Phe amino acid hydrogels to address such issues by encapsulating essential oils, Zanthoxylum armatum and Cinnamomum camphora, in its system and allowing sustained-release of these oils onto bacterial assays of E. coli ATCC 25922, P. hauseri NBRC 3851, M. luteus KACC 13377, and B. subtilis ATCC 66333 for probing enhanced antibacterial properties of the oils by prolonging its efficacy through controlled-release mechanism.

Results

We found that while Zanthoxylum oil showed no particular difference in enhancing the antibacterial property against the three fast growing bacteria, however profound variation was observed against slow growing bacteria B. subtilis. The hydrogel encapsulated oil was able to retain its antibacterial property for a longer time while directly applied oil could not for this bacteria. Even for highly volatile camphor oil, the oil itself failed to show any antibacterial property with direct use, however the hydrogel encapsulated oil was able to show excellent antibacterial property for B. subtilis and M. luteus through prohibition of sublimation via encapsulation.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13104-022-06163-4.

Self-Assembled Peptide Nanostructures for ECM Biomimicry

Proteins are functional building blocks of living organisms that exert a wide variety of functions, but their synthesis and industrial production can be cumbersome and expensive. By contrast, short peptides are very convenient to prepare at a low cost on a large scale, and their self-assembly into nanostructures and gels is a popular avenue for protein biomimicry. In this Review, we will analyze the last 5-year progress on the incorporation of bioactive motifs into self-assembling peptides to mimic functional proteins of the extracellular matrix (ECM) and guide cell fate inside hydrogel scaffolds.

Synergistically enhanced photothermal transition of a polyoxometalate/peptide assembly improved the antibiofilm and antibacterial activities

We successfully developed an antimicrobial assembly (Mo₁₅₄/TK-14) using molybdenum-polyoxometalate and a positively charged peptide of TK-14. It was characterized and assayed using zeta-potential, dynamic light scattering (DLS), and TEM measurements. The Mo₁₅₄/TK-14 assembly showed an enhanced 808 nm absorption and, therefore, improved the photothermal conversion efficiency of Mo₁₅₄ (30.3%) to 38.6%. Consequently, in comparison to 5 μM Mo₁₅₄ without irradiation, both the biofilm formation and bacterial viability of S. aureus were 24.6% and 20.2%, respectively, for the Mo₁₅₄/TK-14 assembly; the biofilm formation and bacterial viability were further decreased to 7.7% and 4.4% under 808 nm irradiation, respectively. Therefore, the Mo₁₅₄/TK-14 assembly reflects convincing antibacterial properties compared to Mo₁₅₄. This is due to the synergistic effect between the peptide-binding enhanced 808 nm absorption and the improved PTT properties. The antimicrobial assembly offers a novel strategy for the rational design of light-responsive antibacterial materials.

Self-Assembling Peptide-Based Hydrogels for Wound Tissue Repair

Wound healing is a long-term, multistage biological process that includes hemostasis, inflammation, proliferation, and tissue remodeling and requires intelligent designs to provide comprehensive and convenient treatment. The complexity of wounds has led to a lack of adequate wound treatment materials, which must systematically regulate unique wound microenvironments. Hydrogels have significant advantages in wound treatment due to their ability to provide spatiotemporal control over the wound healing process. Self-assembling peptide-based hydrogels are particularly attractive due to their innate biocompatibility and biodegradability along with additional advantages including ligand-receptor recognition, stimulus-responsive self-assembly, and the ability to mimic the extracellular matrix. The ability of peptide-based materials to self-assemble in response to the physiological environment, resulting in functionalized microscopic structures, makes them conducive to wound treatment. This review introduces several self-assembling peptide-based systems with various advantages and emphasizes recent advances in self-assembling peptide-based hydrogels that allow for precise control during different stages of wound healing. Moreover, the development of multifunctional self-assembling peptide-based hydrogels that can regulate and remodel the wound immune microenvironment in wound therapy with spatiotemporal control has also been summarized. Overall, this review sheds light on the future clinical and practical applications of self-assembling peptide-based hydrogels.

Polymer Conjugates of Antimicrobial Peptides (AMPs) with d-Amino Acids (d-aa): State of the Art and Future Opportunities

In recent years, antimicrobial peptides (AMPs) have enjoyed a renaissance, as the world is currently facing an emergency in terms of severe infections that evade antibiotics’ treatment. This is due to the increasing emergence and spread of resistance mechanisms. Covalent conjugation with polymers is an interesting strategy to modulate the pharmacokinetic profile of AMPs and enhance their biocompatibility profile. It can also be an effective approach to develop active coatings for medical implants and devices, and to avoid biofilm formation on their surface. In this concise review, we focus on the last 5 years’ progress in this area, pertaining in particular to AMPs that contain d-amino acids, as well as their role, and the advantages that may arise from their introduction into AMPs.

De novo design of self-assembly hydrogels based on Fmoc-diphenylalanine providing drug release

Short peptides with self-assembled nanostructures are widely applied in the areas of drug delivery systems and biomaterials. In this article, we create a new peptide-based hydrogelator (Fmoc-FFRRVR) based on N-fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF) through an approach to improve its hydrophilicity. Compared to Fmoc-FF, Fmoc-FFRRVR prefers to form a hydrogel under mild conditions, and the gelation time is only 2 s. Fmoc-FFRRVR self-assembles into organized arrays of β-sheets in nanofibers via π-stacking of Fmoc-FF, which are supported by circular dichroism and fluorescence emission spectroscopy. Rheology results confirm that the hydrogel of Fmoc-FFRRVR is elastic, reversible and injectable. The newly discovered hydrogel not only retains some excellent performances of Fmoc-FF, but also can be used as a drug carrier for biomedical applications.

Self-assembly of amino acids toward functional biomaterials

Biomolecules, such as proteins and peptides, can be self-assembled. They are widely distributed, easy to obtain, and biocompatible. However, the self-assembly of proteins and peptides has disadvantages, such as difficulty in obtaining high quantities of materials, high cost, polydispersity, and purification limitations. The difficulties in using proteins and peptides as functional materials make it more complicate to arrange assembled nanostructures at both microscopic and macroscopic scales. Amino acids, as the smallest constituent of proteins and the smallest constituent in the bottom-up approach, are the smallest building blocks that can be self-assembled. The self-assembly of single amino acids has the advantages of low synthesis cost, simple modeling, excellent biocompatibility and biodegradability in vivo. In addition, amino acids can be assembled with other components to meet multiple scientific needs. However, using these simple building blocks to design attractive materials remains a challenge due to the simplicity of the amino acids. Most of the review articles about self-assembly focus on large molecules, such as peptides and proteins. The preparation of complicated materials by self-assembly of amino acids has not yet been evaluated. Therefore, it is of great significance to systematically summarize the literature of amino acid self-assembly. This article reviews the recent advances in amino acid self-assembly regarding amino acid self-assembly, functional amino acid self-assembly, amino acid coordination self-assembly, and amino acid regulatory functional molecule self-assembly.

Design, Synthesis, and Antibacterial Evaluation of Novel Ocotillol Derivatives and Their Synergistic Effects with Conventional Antibiotics

The improper use of antibiotics has led to the development of bacterial resistance, resulting in fewer antibiotics for many bacterial infections. Especially, the drug resistance of hospital-acquired methicillin-resistant Staphylococcus aureus (HA-MRSA) is distinctly serious. This research designed and synthesized two series of 3-substituted ocotillol derivatives in order to improve their anti-HA-MRSA potency and synergistic antibacterial activity. Among the synthesized compounds, 20–31 showed minimum inhibitory concentration (MIC) values of 1–64 µg/mL in vitro against HA-MRSA 18–19, 18–20, and S. aureus ATCC29213. Compound 21 showed the best antibacterial activity, with an MIC of 1 μg/mL and had synergistic inhibitory effects. The fractional inhibitory concentration index (FICI) value was 0.375, when combined with chloramphenicol (CHL) or kanamycin (KAN). The structure–activity relationships (SARs) of ocotillol-type derivatives were also summarized. Compound 21 has the potential to be developed as a novel antibacterial agent or potentiator against HA-MRSA.

Unravelling the antimicrobial activity of peptide hydrogel systems: current and future perspectives

The use of hydrogels has garnered significant interest as biomaterial and drug delivery platforms for anti-infective applications. For decades antimicrobial peptides have been heralded as a much needed new class of antimicrobial drugs. Self-assembling peptide hydrogels with inherent antimicrobial ability have recently come to the fore. However, their fundamental antimicrobial properties, selectivity and mechanism of action are relatively undefined. This review attempts to establish a link between antimicrobial efficacy; the self-assembly process; peptide-membrane interactions and mechanical properties by studying several reported peptide systems: β-hairpin/β-loop peptides; multidomain peptides; amphiphilic surfactant-like peptides and ultrashort/low molecular weight peptides. We also explore their role in the formation of amyloid plaques and the potential for an infection etiology in diseases such as Alzheimer's. We look briefly at innovative methods of gel characterization. These may provide useful tools for future studies within this increasingly important field.

A Surfactant Concentration Model for the Systematic Determination of the Critical Micellar Concentration and the Transition Width

The critical micellar concentration (cmc) is a fundamental property of surfactant solutions. Many proposed methods for the definition and determination of the cmc from property-concentration plots yield values, which depend on the studied property, on the specific technique used for its analysis and in many cases on the subjective choice of the chosen type of plot and concentration interval. In this focus review, we revise the application of a surfactant concentration model we proposed earlier that defines the cmc directly based on the surfactant concentration. Known equations for the concentration-dependence of different surfactant properties can then be combined with this concentration model and fitted to experimental data. This modular concept makes it possible to determine the cmc and the transition width in a systematic and unambiguous way. We revise its use in the literature in different contexts: the determination of the cmc of surfactants and their mixtures from different properties (electrical conductivity, NMR chemical shift, self-diffusion, surface tension, UV-Vis absorption, fluorescence intensity and fluorescence correlation). We also revise the dependence of the width of the transition region on composition, detailed studies of the properties of fluorescent probes and the aggregation of non-surfactant systems, namely amyloid peptides.

Single Amino-Acid Based Self-Assembled Biomaterials with Potent Antimicrobial Activity

The design and development of soft biomaterials based on amino acid and short-peptide have gained much attention due to their potent biomedical applications. A slight alteration in the side-chain of single amino acid in a peptide or protein sequence has a huge impact on the structure and function. Phenylalanine is one of the most studied amino acids, which contains an aromatic phenyl group connected through a flexible -CH₂ - unit. In this work, we have examined whether flexibility and aromatic functionality of phenylalanine (Phe) are important in gel formation of model gelator Fmoc-Phe-OH or not. To examine this hypothesis, we synthesized Fmoc-derivatives of three analogues unnatural amino acids including cyclohexylalanine, phenylglycine, and homophenylalanine; which are slightly varied from Phe. Interestingly, all these three new analogues formed hydrogels in phosphate buffer at pH 7.0 having different gelation efficacy and kinetics. This study suggests that the presence of aromatic side-chain and flexibility are not mandatory for the gelation of this model gelator. Newly synthesized unnatural amino acid derivatives have also exhibited promising antimicrobial activity towards gram-positive bacteria by inhibiting cellular oxygen consumption. We further determined the biocompatibility of these amino acid derivatives by using a hemolysis assay on human blood cells. Overall studies described the development of single amino acid-based new injectable biomaterials with improved antimicrobial activity by the slight alteration in the side-chain of amino acid.

PhI(OAc)2 and iodine-mediated synthesis of N-alkyl sulfonamides derived from polycyclic aromatic hydrocarbon scaffolds and determination of their antibacterial and cytotoxic activities

The development of new approaches toward chemo- and regioselective functionalization of polycyclic aromatic hydrocarbon (PAH) scaffolds will provide opportunities for the synthesis of novel biologically active small molecules that exploit the high degree of lipophilicity imparted by the PAH unit. Herein, we report a new synthetic method for C-X bond substitution that is speculated to operate via a N-centered radical (NCR) mechanism according to experimental observations. A series of PAH sulfonamides have been synthesized and their biological activity has been evaluated against Gram-negative and Gram-positive bacterial strains (using a BacTiter-Glo assay) along with a series of mammalian cell lines (using CellTiter-Blue and CellTiter-Glo assays). The viability assays have resulted in the discovery of a number of bactericidal compounds that exhibit potency similar to other well-known antibacterials such as kanamycin and tetracycline, along with the discovery of a luciferase inhibitor. Additionally, the physicochemical and drug-likeness properties of the compounds were determined experimentally and using in silico approaches and the results are presented and discussed within.

Antibiofilm activity of Fmoc-phenylalanine against Gram-positive and Gram-negative bacterial biofilms

Biofilm associated infections are the major contributor of mortality, morbidity and financial burden in patients with a bacterial infection. About 65% of all bacterial infections are associated with the information of bacterial biofilms. Bacterial biofilms not only reduce the efficacy of antibacterial treatment but also increases the threat of developing antibacterial resistance. Recently, our group has discovered the antibacterial activity of Fmoc-phenylalanine (Fmoc-F) and other Fmoc-amino acids (Fmoc-AA). Fmoc-F and other Fmoc-AA showed antibacterial activity due to their surfactant properties. Surfactants are known to eradicate biofilm and enhance antimicrobial activity in biofilm. Thus, in the present study, we evaluated the anti-biofilm activity of Fmoc-F against clinically relevant bacteria. We found that Fmoc-F not only inhibits the biofilm formation in Staphylococcus aureus and Pseudomonas aeruginosa, but also eradicates the already formed biofilms over the surface. Further, Fmoc-F coated glass surface resists S. aureus and P. aeruginosa biofilm formation and attachment, when biofilm is grown over the surface. The mechanistic investigation suggests that Fmoc-F reduces the extracellular matrix (ECM) components such as proteins, carbohydrates and eDNA in the biofilm and affect its stability via direct interactions with ECM components and/ or indirectly through reducing bacterial cell population. Finally, we showed that Fmoc-F treatment in combination with vancomycin and ampicillin synergistically inhibit biofilm formation. Overall, the study demonstrates the potential application of Fmoc-F and other Fmoc-AA molecules individually as well as in combination as anti-biofilm coating material for treating biofilm associated infections.

Hybrid Peptides Based on α-Aminoxy Acids as Antimicrobial and Anticancer Foldamers

α-Aminoxy peptides represent an interesting group of peptidomimetics with high proteolytic stability and the ability to fold into specific, predictable secondary structures. Here, we present a series of hybrid peptides consisting of α-aminoxy acids and α-amino acids with cationic and aromatic, hydrophobic side chains in an alternating manner synthesized using an efficient protocol that combines solution- and solid-phase synthesis. 2D ROESY experiments with a representative hexamer suggested the presence of a 7/8 helical conformation in solution. Biological evaluation revealed a significant impact of the peptide chain length and the N-terminal cap on the antimicrobial and anticancer properties of this series of hybrid peptides. The Fmoc-capped peptide 6e displayed the most potent antimicrobial activity against a panel of Gram-negative and Gram-positive bacterial strains (e. g. against E. Coli: MIC=8 mg/L; S. aureus: MIC=4 mg/L).

Self-Assembling, Ultrashort Peptide Gels as Antimicrobial Biomaterials

Supramolecular antimicrobial hydrogels based on peptides are attractive soft materials for the treatment of infections, considering their ease of preparation and benign fate in biological settings and in the environment. In particular, stimuli-responsive systems that can be assembled/disassembled ad hoc could offer the opportunity to switch on/off their bioactivity as needed. Besides, the shorter is the peptide, the lower its cost of production. However, a structure-to-function relationship is yet to be defined and reported activities are generally not yet competitive relative to traditional antibiotics. Inspiration for their design can be found in host defense peptides (HDPs), which can self-assemble to exert their function. This article reviews research developments in this emerging area, and it examines features, differences and similarities between antimicrobial and amyloid peptides to open the avenue towards the next generation of supramolecular antimicrobial peptides as innovative therapeutic materials.

Enhancing Antimicrobial Peptide Potency through Multivalent Presentation on Coiled-Coil Nanofibrils

Antibiotic-resistant microbes have become a global health threat. New delivery systems that enhance the efficacy of antibiotics and/or overcome the resistances can help combat them. In this context, we present FF03, a fibril-forming α-helical coiled-coil peptide that functions as an efficient scaffold for the multivalent presentation of the weakly cationic antimicrobial peptide (AMP) IN4. The resulting IN4-decorated FF03 coiled-coil fibrils (FF03 + IN4) are nonhemolytic and noncytotoxic and show enhanced antimicrobial activity relative to unconjugated IN4 and standard antibiotics against several bacterial strains. Scanning electron microscopy analysis shows that FF03 + IN4 nanofibers disrupt methicillin-resistant Staphylococcus aureus membranes, indicating a surface-level mode of action. Furthermore, transmission electron microscopy and circular dichroism studies indicate that decoration of the FF03 scaffold with IN4 does not alter the secondary-structure propensity or fibril-forming properties of FF03. Thus, the approach reported herein provides a new peptidic scaffold for the multivalent presentation of AMPs to obtain nonhemolytic and noncytotoxic antimicrobial systems with improved efficacy relative to the unconjugated AMP analogues.

Facile construction of a family of supramolecular gels with good levofloxacin hydrochloride loading capacity

A family of low molecular weight gelators with different alkyl chain lengths was constructed, having excellent gelation ability and antibiotic loading capacity. A low molecular weight hydrogelator was obtained by adjusting the length of alkyl chain.