Effects of polymer-nanoparticle interactions on the viscosity of unentangled polymers under extreme nanoconfinement during capillary rise infiltration

Two-stage photodegradation of indomethacin molecular nanocomposites under extreme confinement

The incorporation of a glassy material into a self-assembled nanoparticle (NP) film can produce highly loaded nanocomposites. Reduction of the NP diameter can lead to extreme nanoconfinement of the glass, significantly affecting the thermal and physical properties of the nanocomposite material. Here, we investigate the photostability and photodegradation mechanisms of molecular nanocomposite films (MNCFs) produced from the infiltration of indomethacin (IMC) molecules into self-assembled films of silica NPs (11-100 nm in diameter). Upon UV irradiation in ambient conditions, IMC degrades in a two-stage process. We demonstrate that nanoconfinement only enhances the photostability of IMC during stage 1, which primarily involves decarboxylation and oxidation. These reactions are kinetically limited by the diffusion of CO2 and O2 and are thus affected by the increased glass transition temperature, Tg, and viscosity under confinement. In contrast, during prolonged UV exposure in ambient conditions, stage 2 of IMC degradation, which involves further reactions with water, is unaffected by confinement. This is attributed to the availability of locally adsorbed water in the nanocomposite under ambient conditions, which does not rely on transport through the confined matrix. Overall, unlike previous reports in inert environments, IMC photodegradation in ambient conditions cannot be improved by confinement. These findings highlight the significance of specific degradation pathways in determining whether a material can be stabilized through extreme nanoconfinement.

Thermal Stability and Photostability of Highly Confined Molecular Nanocomposites

Capillary rise infiltration of molecular glasses into self-assembled layers of rigid nanoparticles (NPs) can produce highly confined molecular nanocomposite films (MNCFs). Here, we investigate the thermal stability and photostability of MNCFs made by confining indomethacin glasses in silica NPs. We demonstrate increasing confinement decreases the rate of thermal degradation and increases the activation energy of degradation (up to ∼70 kJ/mol in 11 nm NPs, ∼3 nm pore size). Upon UV exposure under nitrogen, photodegradation is only observed at the near-surface region of MNCFs, with a thickness of one NP diameter. However, no further degradation is observed, even after prolonged UV exposure. The dramatically improved thermal stability and photostability of MNCFs can be attributed to the slower transport of reaction products, corresponding to the increased Tg (up to ∼30 K in 11 nm NPs). These findings demonstrate that extreme nanoconfinement can prolong the durability of molecular glasses in applications such as coatings and organic electronics.

Nonmonotonic polymer translocation kinetics through nanopores under changing surface-polymer interactions

Understanding the dynamics of polymers in confined environments is pivotal for diverse applications ranging from polymer upcycling to bioseparations. In this study, we develop an entropic barrier model using self-consistent field theory that considers the effect of attractive surface interactions, solvation, and confinement on polymer kinetics. In this model, we consider the translocation of a polymer from one cavity into a second cavity through a single-segment-width nanopore. We find that, for a polymer in a good solvent (i.e., excluded volume, u0 > 0), there is a nonmonotonic dependence of mean translocation time (τ) on surface interaction strength, ɛ. At low ɛ, excluded volume interactions lead to an energetic penalty and longer translocation times. As ɛ increases, the surface interactions counteract the energetic penalty imposed by excluded volume and the polymer translocates faster through the nanopore. However, as ɛ continues to increase, an adsorption transition occurs, which leads to significantly slower kinetics due to the penalty of desorption from the first cavity. The ɛ at which this adsorption transition occurs is a function of the excluded volume, with higher u0 leading to an adsorption transition at higher ɛ. Finally, we consider the effect of translocation across different size cavities. We find that the kinetics for translocation into a smaller cavity speeds up while translocation to a larger cavity slows down with increasing ɛ due to higher surface contact under stronger confinement.

Flexible Antireflection Coatings with Enhanced Durability and Antifogging Properties

Antireflection coatings (ARCs) enhance optical clarity and improve light transmission by reducing glare and reflections. The application of conventional ARCs in flexible devices, however, is impeded by their lack of durability, particularly under bending deformation. We develop ARCs that withstand delamination and fracture, remaining intact even after 1000 bending cycles with a 5 cm bending radius. We fabricate integrated ARCs (iARCs) on a poly(methyl methacrylate) (PMMA) substrate by inducing free polymers to infiltrate the interstices of a disordered assembly of hollow silica nanochains and nanospheres. The polydispersity of PMMA creates a refractive index gradient, yielding a broadband antireflection capability. The nanochain-based iARCs are superior to the nanosphere-based coatings in both antireflection properties and mechanical durability, owing to the lower packing density and mechanical interlocking of the nanochains, respectively. Additionally, these nanochain iARCs display antifogging properties stemming from their superhydrophilicity. While our demonstrations are based on PMMA as a model substrate, this methodology is potentially extendable to other polymers, enhancing the iARC's applicability across various practical applications, including flexible and wearable devices.

Capillary filling of star polymer melts in nanopores

The topology of a polymer profoundly influences its behavior. However, its effect on imbibition dynamics remains poorly understood. In the present work, capillary filling (during imbibition and following full imbibition) of star polymer melts was investigated by molecular dynamics simulations with a coarse-grained model. The reversal of imbibition dynamics observed for linear-chain systems was also present for star polymers. Star polymers with short arms penetrate slower than the prediction of the Lucas-Washburn equation, while systems with long arms penetrate faster. The radius of gyration increases during confined flow, indicating the orientation and disentanglement of arms. In addition, the higher the functionality of the star polymer, the more entanglement points are retained. Besides, a stiff region near the core segments of the stars is observed, which increases in size with functionality. The proportion of different configurations of the arms (e.g., loops, trains, tails) changes dramatically with the arm length and degree of confinement but is only influenced by the functionality when the arms are short. Following full imbibition, the different decay rates of the self-correlation function of the core-to-end vector illustrate that arms take a longer time to reach the equilibrium state as the functionality, arm length, and degree of confinement increase, in agreement with recent experimental findings. Furthermore, the star topology induces a stronger effect of adsorption and friction, which becomes more pronounced with increasing functionality.

Capillary filling dynamics of polymer melts in a bicontinuous nanoporous scaffold

Polymer infiltrated nanoporous gold is prepared by infiltrating polymer melts into a bicontinuous, nanoporous gold (NPG) scaffold. Polystyrene (PS) films with molecular weights (Mw) from 424 to 1133 kDa are infiltrated into a NPG scaffold (∼120 nm), with a pore radius (Rp) and pore volume fraction of 37.5 nm and 50%, respectively. The confinement ratios (Γ=RgRp) range from 0.47 to 0.77, suggesting that the polymers inside the pores are moderately confined. The time for PS to achieve 80% infiltration (τ80%) is determined using in situ spectroscopic ellipsometry at 150 °C. The kinetics of infiltration scales weaker with Mw, τ80%∝Mw1.30±0.20, than expected from bulk viscosity Mw3.4. Furthermore, the effective viscosity of the PS melt inside NPG, inferred from the Lucas-Washburn model, is reduced by more than one order of magnitude compared to the bulk. Molecular dynamics simulation results are in good agreement with experiments predicting scaling as Mw1.4. The reduced dependence of Mw and the enhanced kinetics of infiltration are attributed to a reduction in chain entanglement density during infiltration and a reduction in polymer-wall friction with increasing polymer molecular weight. Compared to the traditional approach involving adding discrete particles into the polymer matrix, these studies show that nanocomposites with higher loading can be readily prepared, and that kinetics of infiltration are faster due to polymer confinement inside pores. These films have potential as actuators when filled with stimuli-responsive polymers as well as polymer electrolyte and fuel cell membranes.

Increase in the effective viscosity of polyethylene under extreme nanoconfinement

Understanding polymer transport in nanopores is crucial for optimizing heterogeneously catalyzed processes in polymer upcycling and fabricating high-performance nanocomposite films and membranes. Although confined polymer dynamics have been extensively studied, the behavior of polyethylene (PE)-the most widely used commodity polymer-in pores smaller than 20 nm remains largely unexplored. We investigate the effects of extreme nanoconfinement on PE transport using capillary rise infiltration in silica nanoparticle packings with average pore radii ranging from ∼1 to ∼9 nm. Using in situ ellipsometry and the Lucas-Washburn model, we discover a previously unknown inverse relationship between effective viscosity (ηeff) and average pore radius (Rpore). Additonally, we determine that PE transport under these extreme conditions is primarily governed by physical confinement, rather than pore surface chemistry. We refine an existing theory to provide a generalized formalism to describe the polymer transport dynamics over a wide range of pore radii (from 1 nm and larger). Our results offer valuable insights for optimizing catalyst supports in polymer upcycling and improving infiltration processes for nanocomposite fabrication.

Dual Porosity-Enhanced Antireflection Coatings with Continuous Gradient

The incorporation of porous structures into films and coatings can transform their properties for applications in optics, separation, electronics, and energy generation and storage. Packing nanoparticles (NPs) is a versatile approach for fabricating nanoporous films with a tunable structure and properties. The mechanical fragility of NP packing-based films and coatings, however, significantly impedes their widespread utilization. Although infiltrating a polymer into the interstices of these NP packings has been shown to enhance their mechanical durability, this method completely eliminates the porosity of the structures, compromising their properties and functionality. This study presents a new approach to fabricate highly loaded porous nanocomposite films with a gradient in the refractive index by infiltrating subsaturating amounts of poly(methyl methacrylate) (PMMA) into disordered packings of hollow silica NPs. We demonstrate that dual porosity is a critical feature that enhances their antireflection (AR) and mechanical properties. The hollow cores of NPs prevent a substantial increase in the refractive index of the resulting films. Moreover, the interparticle voids allow for mechanical reinforcement to occur when the NP packings are infiltrated with PMMA, making them even more suitable for AR coatings. The refractive index and gradient across the nanocomposites can be tailored by adjusting the amount of PMMA infiltrated into the NP packing, the shape of hollow NPs, and the annealing time. The nanocomposite coatings with a continuous gradient in refractive index exhibit excellent AR properties and enhanced mechanical durability. Combined with the unique structural tunability afforded by the dual porosity, this approach provides a scalable and effective way to create robust and graded nanoporous structures for various applications.

Linking Interfacial Bonding and Thermal Conductivity in Molecularly-Confined Polymer-Glass Nanocomposites with Ultra-High Interfacial Density

Thermal transport in polymer nanocomposites becomes dependent on the interfacial thermal conductance due to the ultra-high density of the internal interfaces when the polymer and filler domains are intimately mixed at the nanoscale. However, there is a lack of experimental measurements that can link the thermal conductance across the interfaces to the chemistry and bonding between the polymer molecules and the glass surface. Characterizing the thermal properties of amorphous composites are a particular challenge as their low intrinsic thermal conductivity leads to poor measurement sensitivity of the interfacial thermal conductance. To address this issue here, polymers are confined in porous organosilicates with high interfacial densities, stable composite structure, and varying surface chemistries. The thermal conductivities and fracture energies of the composites are measured with frequency dependent time-domain thermoreflectance (TDTR) and thin-film fracture testing, respectively. Effective medium theory (EMT) along with finite element analysis (FEA) is then used to uniquely extract the thermal boundary conductance (TBC) from the measured thermal conductivity of the composites. Changes in TBC are then linked to the hydrogen bonding between the polymer and organosilicate as quantified by Fourier-transform infrared (FTIR) and X-ray photoelectron (XPS) spectroscopy. This platform for analysis is a new paradigm in the experimental investigation of heat flow across constituent domains.

Polymer solution structure and dynamics within pores of hexagonally close-packed nanoparticles

Using coarse-grained molecular dynamics simulations, we examine structure and dynamics of polymer solutions under confinement within the pores of a hexagonally close-packed (HCP) nanoparticle system with nanoparticle diameter fifty times that of the polymer Kuhn segment size. We model a condition where the polymer chain is in a good solvent (i.e., polymer-polymer interaction is purely repulsive and polymer-solvent and solvent-solvent interactions are attractive) and the polymer-nanoparticle and solvent-nanoparticle interactions are purely repulsive. We probe three polymer lengths (N = 10, 114, and 228 Kuhn segments) and three solution concentrations (1, 10, and 25%v) to understand how the polymer chain conformations and chain center-of-mass diffusion change under confinement within the pores of the HCP nanoparticle structure from those seen in bulk. The known trend of bulk polymer R_g² decreasing with increasing concentration no longer holds when confined in the pores of HCP nanoparticle structure; for example, for the 114-mer, the HCP 〈R_g²〉 at 1%v concentration is lower than HCP 〈R_g²〉 at 10%v concentration. The 〈R_g²〉 of the 114-mer and 228-mer exhibit the largest percent decline going from bulk to HCP at the 1%v concentration and the smallest percent decline at the 25%v concentration. We also provide insight into how the confinement ratio (CR) of polymer chain size to pore size within tetrahedral and octahedral pores in the HCP arrangement of nanoparticles affects the chain conformation and diffusion at various concentrations. At the same concentration, the N = 114 has significantly more movement between pores than the N = 228 chains. For the N = 114 polymer, the diffusion between pores (i.e., inter-pore diffusion) accelerates the overall diffusion rate for the confined HCP system while for the N = 228 polymer, the polymer diffusion in the entire HCP is dominated by the diffusion within the tetrahedral or octahedral pores with minor contributions from inter-pore diffusion. These findings augment the fundamental understanding of macromolecular diffusion through large, densely packed nanoparticle assemblies and are relevant to research focused on fabrication of polymer composite materials for chemical separations, storage, optics, and photonics. We perform coarse-grained molecular dynamics simulations to understand structure and dynamics of polymer solutions under confinement within hexagonal close packed nanoparticles with radii much larger than the polymer chain's bulk radius of gyration.

Organizing Nanoparticles in Semicrystalline Polymers by Modifying Particle Diffusivity

We have previously shown that semicrystalline polymers can be reinforced by adding nanoparticles (NPs) and then ordering them into specific motifs using the crystallization process. A key result we have found is that when the spherulite growth rate is slowed below a critical value, then, NPs can order into the amorphous interlamellar regions of the semicrystalline structure. The effects of spherulite growth rate in this context have previously been examined, and here we focus on the role of NP diffusivity. We achieve this goal by changing the poly(ethylene oxide) (PEO) molecular weight as a route to altering the matrix viscosity. In particular, four molecular weights of PEO were employed ranging from 5.4-46 kDa. Each sample was loaded with 10 vol % of bare 14 nm diameter silica NPs. After initially studying spherulite growth rates, experiments were designed to fix the spherulite growth rate across sample molecular weights to study particle ordering, induced by polymer crystallization. We find that, at the fastest growth rate studied (12 μm/s), the lowest molecular weight sample showed the highest order, presumably due to enhanced particle mobility. However, as the spherulite growth rate is slowed, the maximum ordering behavior is observed at intermediate molecular weights. The trend observed at slow growth rates is explained by the large-scale segregation of NPs (presumably into the grain boundaries, i.e., the interspherulitic regions); evidence for this is the observed transition of spherulite growth to diffusion-control at slow growth rates in the lowest molecular weight PEO sample studied.

The Interplay of Polymer Bridging and Entanglement in Toughening Polymer-Infiltrated Nanoparticle Films

Polymer-nanoparticle composite films (PNCFs) with high loadings of nanoparticles (NPs) (>50 vol %) have applications in multiple areas, and an understanding of their mechanical properties is essential for their broader use. The high-volume fraction and small size of the NPs lead to physical confinement of the polymers that can drastically change the properties of polymers relative to the bulk. We investigate the fracture behavior of a class of highly loaded PNCFs prepared by polymer infiltration into NP packings. These polymer-infiltrated nanoparticle films (PINFs) have applications as multifunctional coatings and membranes and provide a platform to understand the behavior of polymers that are highly confined. Here, the extent of confinement in PINFs is tuned from 0.1 to 44 and the fracture toughness of PINFs is increased by up to a factor of 12 by varying the molecular weight of the polymers over 3 orders of magnitude and using NPs with diameters ranging from 9 to 100 nm. The results show that brittle, low molecular weight (MW) polymers can significantly toughen NP packings, and this toughening effect becomes less pronounced with increasing NP size. In contrast, high MW polymers capable of forming interchain entanglements are more effective in toughening large NP packings. We propose that confinement has competing effects of polymer bridging increasing toughness and chain disentanglement decreasing toughness. These findings provide insight into the fracture behavior of confined polymers and will guide the development of mechanically robust PINFs as well as other highly loaded PNCFs.

Modulating Interactions between Molten Polystyrene and Porous Solids Using Atomic Layer Deposition

Understanding and modulating the interactions between molten polymers and porous solids is important for numerous processes and phenomena including catalytic conversion of polymers and fabrication of nanocomposites and nanostructured materials. Although changing the surface composition of pores would enable modulation of interactions between polymers and nanoporous solids, it is challenging to achieve such a control without inducing significant changes to the size and structure of nanopores. In this work, we demonstrate that the interactions between molten polystyrene (PS) and disordered packings of SiO₂ nanoparticles (NPs) can be modulated by changing the surface composition of the NPs using atomic layer deposition (ALD). A disordered packing of silica NPs is modified with varying surface coverages of TiO₂, WO₃, and CaCO₃, with coverages estimated by the mass gain and the refractive index change of NP packings. Based on the time required to fully infiltrate these ALD-modified NP packings via capillarity, the contact angles for PS on different surfaces prepared via ALD are determined. The contact angle gradually changes from that of pure SiO₂ to that of the fully covered surfaces. The contact angles for PS on SiO₂, TiO₂, WO₃, and CaCO₃ are found to be 20, 62, 70, and 10°, respectively. Interestingly, the contact angles and interfacial energies between PS and the ALD-modified surfaces do not correlate strongly with the water contact angle of these surfaces; thus, caution must be exercised in predicting how a polymer would wet or interact with porous solids solely based on their hydrophilicity. The method presented in this work can be extended to study the interactions between a wide range of polymers and surfaces in porous media, which will have important implications for designing new catalytic materials for polymer upcycling reactions and novel NP-polymer composite films and membranes with enhanced mechanical and transport properties.

Effect of Nanoscale Confinement on Polymer-Infiltrated Scaffold Metal Composites

Most research on polymer composites has focused on adding discrete inorganic nanofillers to a polymer matrix to impart properties not found in polymers alone. However, properties such as ion conductivity and mechanical reinforcement would be greatly improved if the composite exhibited an interconnected network of inorganic and polymer phases. Here, we fabricate bicontinuous polymer-infiltrated scaffold metal (PrISM) composites by infiltrating polymer into nanoporous gold (NPG) films. Polystyrene (PS) and poly(2-vinylpyridine) (P2VP) films are infiltrated into the ∼43 nm diameter NPG pores via capillary forces during thermal annealing above the polymer glass transition temperature (T_g). The infiltration process is characterized in situ using spectroscopic ellipsometry. PS and P2VP, which have different affinities for the metal scaffold, exhibit slower segmental dynamics compared to their bulk counterparts when confined within the nanopores, as measured through T_g. The more attractive P2VP shows a 20 °C increase in T_g relative to its bulk, while PS only shows a 6 °C increase at a comparable molecular weight. The infiltrated polymer, in turn, stabilizes the gold nanopores against temporal coarsening. The broad tunability of these polymer/metal hybrids represents a unique template for designing functional network composite structures with applications ranging from flexible electronics to fuel cell membranes.

Polymer-Infiltrated Nanoparticle Films Using Capillarity-Based Techniques: Toward Multifunctional Coatings and Membranes

Polymer-infiltrated nanoparticle films (PINFs) are a new class of nanocomposites that offer synergistic properties and functionality derived from unusually high fractions of nanomaterials. Recently, two versatile techniques,capillary rise infiltration (CaRI) and solvent-driven infiltration of polymer (SIP), have been introduced that exploit capillary forces in films of densely packed nanoparticles. In CaRI, a highly loaded PINF is produced by thermally induced wicking of polymer melt into the nanoparticle packing pores. In SIP, exposure of a polymer-nanoparticle bilayer to solvent vapor atmosphere induces capillary condensation of solvent in the pores of nanoparticle packing, leading to infiltration of polymer into the solvent-filled pores. CaRI/SIP PINFs show superior properties compared with polymer nanocomposite films made using traditional methods, including superb mechanical properties, thermal stability, heat transfer, and optical properties. This review discusses fundamental aspects of the infiltration process and highlights potential applications in separations, structural coatings, and polymer upcycling-a process to convert polymer wastes into useful chemicals.

Alcohol-Treated Porous PTFE Substrate for the Penetration of PTFE-Incompatible Hydrocarbon-Based Ionomer Solutions

For a mechanically tough proton exchange membrane, a composite membrane incorporated with a porous polymer substrate is of great interest to suppress the ionomer swelling and to improve the dimensional stability and mechanical strength of the ionomers. For the composite membranes, good impregnation of substrate-incompatible ionomer solution into the substrate pores still remains one of the challenges to be solved. Here, we demonstrated a facile process (surface treatment with solvents compatible with both substrate and the ionomer solution) for the fabrication of the composite membranes using polytetrafluoroethylene (PTFE) as a porous substrate and poly(arylene ether sulfone) (SPAES) as a hydrocarbon-based (HC) ionomer. Appropriate solvents for the surface treatment were sought through the contact angle measurement, and it was found that alcohol solvents effectively tuned the surface property of PTFE pores to facilitate the penetration of the SPAES/N-methyl-2-pyrrolidone (NMP) solution into ∼300 nm pores of the substrate. Using this simple alcohol treatment, the SPAES/NMP contact angle was reduced in half, and we could fabricate the mechanically tough PTFE/HC composite membranes, which were apparently translucent and microscopically almost void-free composite membranes.

Polymer-infiltrated nanoplatelet films with nacre-like structure via flow coating and capillary rise infiltration (CaRI)

Alignment of highly anisotropic nanomaterials in a polymer matrix can yield nanocomposites with unique mechanical and transport properties. Conventional methods of nanocomposite film fabrication are not well-suited for manufacturing composites with very high concentrations of anisotropic nanomaterials, potentially limiting the widespread implementation of these useful structures. In this work, we present a scalable approach to fabricate polymer-infiltrated nanoplatelet films (PINFs) based on flow coating and capillary rise infiltration (CaRI) and study the processing-structure-property relationship of these PINFs. We show that films with high aspect ratio (AR) gibbsite (Al (OH)3) nanoplatelets (NPTs) aligned parallel to the substrate can be prepared using a flow coating process. NPTs are highly aligned with a Herman's order parameter of 0.96 and a high packing fraction >80 vol%. Such packings show significantly higher fracture toughness compared to low AR nanoparticle (NP) packings. By depositing NPTs on a polymer film and subsequently annealing the bilayer above the glass transition temperature of the polymer, polymer infiltrates into the tortuous NPT packings though capillarity. We observe larger enhancement in the modulus, hardness and scratch resistance of NPT films upon polymer infiltration compared to NP packings. The excellent mechanical properties of such films benefit from both thermally promoted oxide bridge formation between NPTs as well as polymer infiltration increasing the strength of NPT contacts. Our approach is widely applicable to highly anisotropic nanomaterials and allows the generation of mechanically robust polymer nanocomposite films for a diverse set of applications.

Effect of Nanopore Geometry in the Conformation and Vibrational Dynamics of a Highly Confined Molecular Glass

The effect of nanoporous confinement on the glass transition temperature (T_g) strongly depends on the type of porous media. Here, we study the molecular origins of this effect in a molecular glass, N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD), highly confined in concave and convex geometries. When confined in controlled pore glass (CPG) with convex pores, TPD's vibrational spectra remained unchanged and two T_g's were observed, consistent with previous studies. In contrast, when confined in silica nanoparticle packings with concave pores, the vibrational peaks were shifted due to more planar conformations and T_g increased, as the pore size was decreased. The strong T_g increases in concave pores indicate significantly slower relaxation dynamics compared to CPG. Given TPD's weak interaction with silica, these effects are entropic in nature and are due to conformational changes at molecular level. The results highlight the role of intramolecular degrees of freedom in the glass transition, which have not been extensively explored.

Conformation and dynamics of ring polymers under symmetric thin film confinement

Understanding the structure and dynamics of polymers under confinement has been of widespread interest, and one class of polymers that have received comparatively little attention under confinement is that of ring polymers. The properties of non-concatenated ring polymers can also be important in biological fields because ring polymers have been proven to be a good model to study DNA organization in the cell nucleus. From our previous study, linear polymers in a cylindrically confined polymer melt were found to segregate from each other as a result of the strong correlation hole effect that is enhanced by the confining surfaces. By comparison, our subsequent study of linear polymers in confined thin films at similar levels of confinements found only the onset of segregation. In this study, we use molecular dynamics simulation to investigate the chain conformations and dynamics of ring polymers under planar (1D) confinement as a function of film thickness. Our results show that conformations of ring polymers are similar to the linear polymers under planar confinement, except that ring polymers are less compressed in the direction normal to the walls. While we find that the correlation hole effect is enhanced under confinement, it is not as pronounced as the linear polymers under 2D confinement. Finally, we show that chain dynamics far above Tg are primarily affected by the friction from walls based on the monomeric friction coefficient we get from the Rouse mode analysis.

Impact of nanoconfinement on acetylacetone Equilibria in Ordered Mesoporous Silicates

Nanoconfinement is one of the most intriguing nanoscale effects and affects several physical and chemical properties of molecules and materials, including viscosity, reaction kinetics, and glass transition temperature. In this work, liquid nuclear magnetic resonance (NMR) was used to analyze the behavior of 2,4-pentadienone in ordered mesoporous materials with a pore diameter of between 3 and 10 nm. The liquid NMR results showed meaningful changes in the hydrogen chemical shift and the keto-enol chemical equilibrium, which were associated with the pore diameter, allowing the authors to observe the effects of nanoconfinement. An interesting phenomenon was observed where the chemical equilibria of 2,4-pentadienone confined in a mesoporous material with a pore diameter of 3.5 nm was similar to that obtained with free (bulk) 2,4-pentadienone in larger pore materials. Another interesting result was observed for the enthalpy and entropy of the tautomeric equilibria of 2,4-pentadienone confined in mesoporous materials with a 5.5 nm pore diameter being -7.9 kJ mol^-1 and -15.9 J mol^-1.K. These values are similar to those obtained by dimethyl sulfoxide. This phenomenon indicates the possible use of ordered mesoporous materials as a reaction substitute in organic solvents. It was further observed that while the values of enthalpy (ΔH) and entropy (ΔS) had been modified by confinement, the Gibbs free energy (ΔG) value remained closer to that observed in free (bulk) 2,4-pentadienone. It is expected that this study will help in understanding the effects of nanoconfinement and provide a simple method to employ NMR techniques to analyze these phenomena.

Multifunctional composite films with vertically aligned ZnO nanowires by leaching-enabled capillary rise infiltration

Nanocomposite films (NCFs) with vertically aligned nanowires (NWs) provide several useful properties owing to their unique morphology. One of the key challenges in producing such an NCF is retaining the vertical alignment of NWs during NCF fabrication. Although current methods such as layer-by-layer assembly and solution-based processes with field-induced alignment of NWs have been successfully demonstrated, these approaches require multiple steps thus are time-consuming, and only suitable for lab-scale production, consequently limiting their widespread applicability. Herein, we describe a new method for fabricating an NCF with vertically aligned ZnO NWs by inducing leaching-enabled capillary rise infiltration (LeCaRI) of uncross-linked and mobile oligomer chains from a poly(dimethylsiloxane) (PDMS) slab into the space between the vertically aligned ZnO NWs. PDMS-infiltrated ZnO NW NCFs have a suite of useful properties including superhydrophobicity, self-cleaning, solvent resistance, and anti-icing properties as well as high transparency and anti-reflection properties. The NCF can easily recover its superhydrophobicity after it has been compromised through repeated plasma treatments or even exposure to intense UV irradiation. Moreover, our approach represents a straightforward, efficient, and potentially scalable strategy to produce multifunctional NCFs with vertically aligned NW arrays which could be easily extended to other types of materials and NW arrangements toward a wide range of properties and applications.

Thermal Degradation of Polystyrene under Extreme Nanoconfinement

Extreme nanoconfinement has been shown to significantly affect the properties of materials. Here we demonstrate that extreme nanoconfinement can significantly improve the thermal stability of polystyrene (PS) and reduce its flammability. Capillary rise infiltration (CaRI) is used to infiltrate PS into films of randomly packed silica nanoparticles (NPs) to produce highly confined states. We demonstrate that as the NP size is decreased, increasing the degree of confinement, the isothermal degradation time is dramatically increased, by up to a factor of 30 at 543 K for PS confined in ∼3 nm pores. The activation energy of PS degradation is also increased, by 50 kJ/mol in the most confined state (∼3 nm pores). We demonstrate that the degradation proceeds through the film surface and from the center of large holes toward NP surfaces, indirect evidence that the process is diffusion limited. The surface-driven process dramatically reduces char formation even in large NP packings that show no significant changes in their dynamics and glass transition temperature (T_g) compared to the bulk.

Diffusivity and glass transition of polymer chains in polymer nanocomposites

The diffusivity and glass transition of polymer chains in polymer nanocomposites are studied by using dynamic Monte Carlo simulation. Nanoparticles are modeled as immobile and distributed in a cubic lattice in the system. The diffusion coefficient D of polymer chains is reduced, while the glass transition temperature Tg is increased by nanoparticles. Our results show that the effect of nanoparticles can be summarized as D = D0[1 - exp(-α·ID/2Rg)] and Tg = Tg,0[1 - exp(-α·ID/2Rg)]-1, with D0 and Tg,0 being the diffusion coefficient and the glass transition temperature in the absence of nanoparticles, Rg the radius of gyration of polymer chains, and ID the surface spacing between nearest-neighbor nanoparticles. The parameter α that governs the dynamics of polymer chains decreases with increasing nanoparticles' size or decreasing the temperature. Our results also show that smaller nanoparticles exert a stronger influence on the polymer dynamics at the same concentration of nanoparticles, whereas larger nanoparticles show a stronger effect at the same ID.

Effect of Adjacent Hydrophilic Polymer Thin Films on Physical Aging and Residual Stress in Thin Films of Poly(butylnorbornene-ran-hydroxyhexafluoroisopropyl norbornene)

The properties of thin supported polymer films can be dramatically impacted by the substrate upon which it resides. A simple way to alter the properties of the substrate (chemistry, rigidity, dynamics) is by coating it with an immiscible polymer. Here we describe how ultrathin (ca. 2 nm) hydrophilic polymer layers of poly(acrylic acid), PAA, and poly(styrenesulfonate), PSS, impact the aging behavior and the residual stress in thin films of poly(butylnorbornene-ran-hydroxyhexafluoroisopropyl norbornene), BuNB-r-HFANB. The aging rate decreases as the film thickness (h) is decreased, but the extent of this change depends on the adjacent layer. Even for the thickest films (h>500 nm), there is a decrease in the aging rate at 100 °C when BuNB-r-HFANB is in contact with PSS. In an effort to understand the origins of these differences in the aging behavior, the elastic modulus and residual stress (σR) in the films were determined by wrinkling as a function of aging time. The change in the elastic modulus during aging does not appear to be directly correlated with the densification or expansion of the films, but the aging rates appear to roughly scale as hσR 1/3. These results illustrate that the physical aging of thin polymer films can be altered by adjacent polymers.

Toughening Nanoparticle Films via Polymer Infiltration and Confinement

Disordered nanoparticle films have significant technological applications as coatings and membranes. Unfortunately, their use to date has been limited by poor mechanical properties, notably low fracture toughness, which often results in brittle failure and cracking. We demonstrate that the fracture toughness of TiO₂ nanoparticle films can be increased by nearly an order of magnitude through infiltration of polystyrene into the film. The fracture properties of films with various polymer volume fractions were characterized via nanoindentation pillar-splitting tests. Significant toughening is observed even at low volume fractions of polymer, which allows the nanoparticle packing to be toughened while retaining porosity. Moreover, higher-molecular-weight polymers lead to greater toughening at low polymer volume fractions. The toughness enhancement observed in polymer-infiltrated nanoparticle films may be attributed to multiple factors, including an increase in the area and strength of interparticle contacts, deflection and blunting of cracks during failure, and confinement-induced polymer bridging of nanoparticles. Our findings demonstrate that polymer infiltration is a highly effective route for reinforcing nanoparticle packings while retaining porosity.

Diminishing Interfacial Effects with Decreasing Nanoparticle Size in Polymer-Nanoparticle Composites

Using molecular simulations on model polymer nanocomposites at fixed filler loading, we show that interfacial polymer dynamics are affected less with decreasing nanoparticle (NP) size. However, the glass transition temperature T_{g} changes substantially more for an extremely small NP. The reason for this apparent contradiction is that the mean NP spacing decreases with decreasing particle size. Thus, all polymers are effectively interfacial for sufficiently small NPs, resulting in relatively large T_{g} shifts, even though the interfacial effects are smaller. For larger NPs, interfacial relaxations are substantially slower than the matrix for favorable NP-polymer interactions. The minority "bound" polymer dynamically decouples from the polymer matrix, and we only find small changes in T_{g} relative to that of the bulk polymer for large NPs. These results are used to organize a large body of relevant experimental data, and we propose an apparent universal dependence on the ratio of the face-to-face distance between the NPs and the chain radius of gyration.

Dramatic Increase in Polymer Glass Transition Temperature under Extreme Nanoconfinement in Weakly Interacting Nanoparticle Films

Properties of polymers in polymer nanocomposites and nanopores have been shown to deviate from their respective bulk properties due to physical confinement as well as polymer-particle interfacial interactions. However, separating the confinement effects from the interfacial effects under extreme nanoconfinement is experimentally challenging. Capillary rise infiltration enables polymer infiltration into nanoparticle (NP) packings, thereby confining polymers within extremely small pores and dramatically increasing the interfacial area, providing a good system to systematically distinguish the role of each effect on polymer properties. In this study, we investigate the effect of spatial confinement on the glass transition temperature ( T_g) of polystyrene (PS) infiltrated into SiO₂ NP films. The degree of confinement is tuned by varying the molecular weight of polymers, the size of NPs (diameters between 11 and 100 nm, producing 3-30 nm average pore sizes), and the fill-fraction of PS in the NP films. We show that in these dense NP packings the T_g of confined PS, which interacts weakly with SiO₂ NPs, significantly increases with decreasing pore size such that for the two molecular weights of PS studied the T_g increases by up to 50 K in 11 nm NP packings, while T_g is close to the bulk T_g in 100 nm NP packings. Interestingly, as the fill-fraction of PS is decreased, resulting in the accumulation of the polymer in the contacts between nanoparticles, hence an increased specific interfacial area, the T_g further increases relative to the fully filled films by another 5-8 K, indicating the strong role of geometrical confinement as opposed to the interfacial effects on the measured T_g values.