Complex coacervation

Co-sonicated coacervation for high-efficiency green nanoencapsulation of phytosterols by colloidal non-biotoxic solid lipid nanoparticles

Plant sterols are used as a supplement or an additive to reduce LDL cholesterol. The poor dispersibility and instability of phytosterols are the main limitations of their application. So, we tried to overcome these problems through nanoencapsulation of them with colloidal natural RSs (SLNs) using an effective approach to achieve higher efficiency and less intrinsic coagulation. Phytosterols extracted from flax seeds oil with caffeine by a new method were encapsulated with a stable colloid of sheep fat and ostrich oil (1:2), soy lecithin, and glucose through co-sonicated coacervation. Characterization of the obtained SLNs was conducted using FTIR, UV-Vis, SEM, DLS, and GC analysis. The three-factor three-level Behnken design (BBD) was used to prioritize the factors affecting the coacervation process to optimize particle size and loading capacity of SLNs. Operational conditions were examined, revealing that the size of SLNs was below 100 nm, with a phytosterols content (EE %) of 85.46% with high positive zeta potential. The nanocapsules' anti-microbial activity and drug-release behavior were then evaluated using the CFU count method and Beer-Lambert's law, respectively. The controlled release of nanocapsules (below 20%) at ambient temperature has been tested. The stability of nano-encapsulated phytosterols was investigated for six months. All results show that this green optimal coacervation is a better way than conventional methods to produce stable SLNs for the nanoencapsulation of phytosterols.

Amyloid-polysaccharide interfacial coacervates as therapeutic materials

Coacervation via liquid-liquid phase separation provides an excellent opportunity to address the challenges of designing nanostructured biomaterials with multiple functionalities. Protein-polysaccharide coacervates, in particular, offer an appealing strategy to target biomaterial scaffolds, but these systems suffer from the low mechanical and chemical stabilities of protein-based condensates. Here we overcome these limitations by transforming native proteins into amyloid fibrils and demonstrate that the coacervation of cationic protein amyloids and anionic linear polysaccharides results in the interfacial self-assembly of biomaterials with precise control of their structure and properties. The coacervates present a highly ordered asymmetric architecture with amyloid fibrils on one side and the polysaccharide on the other. We demonstrate the excellent performance of these coacervates for gastric ulcer protection by validating via an in vivo assay their therapeutic effect as engineered microparticles. These results point at amyloid-polysaccharides coacervates as an original and effective biomaterial for multiple uses in internal medicine.

Recovery and Utilization of Pea Albumins as Acidic Emulsion Stabilizer by Complexation with Dextran Sulfate

In this work, pea albumins (PAs) were efficiently recovered by complexation with dextran sulfate (DS), and the emulsifying ability and stability of PA/DS complexes were studied. The largest amounts of PAs (81.25%) were recovered at r = 5:1 and pH_max (pH 3.41) by forming insoluble complexes; and only soluble complexes were formed at r = 2:1 and over the whole pH range (2.0-7.0). The emulsions stabilized by PA/DS soluble complexes remained stable under acidic conditions due to the highly negatively charge (from -45.10 ± 0.40 to -57.23 ± 0.66 mV) and small particle size (0.168 ± 0.010-0.448 ± 0.004 μm), while emulsions stabilized by PAs alone generated a strong creaming and serum separation at pH 5 and 6. In terms of emulsifying stability, all PA emulsions and unheated PA/DS emulsions became unstable with different creaming index after 14 days storage. SDS-PAGE results showed that the interface adsorption proteins of unheated emulsions mainly consisted of PA1a, which was unfavorable to the stability of the interface. On the contrary, heat treatment (95 °C, 30 min) and complexation (PA/DS = 2:1) enhanced the adsorption of PA2 and lectin at the interface, inhibiting the aggregation of PA2 and lectin. This resulted in long-term stability of the PA/DS emulsions under acidic conditions.

Sodium Alginate—Natural Microencapsulation Material of Polymeric Microparticles

From the multitude of materials currently available on the market that can be used in the development of microparticles, sodium alginate has become one of the most studied natural anionic polymers that can be included in controlled-release pharmaceutical systems alongside other polymers due to its low cost, low toxicity, biocompatibility, biodegradability and gelatinous die-forming capacity in the presence of Ca²⁺ ions. In this review, we have shown that through coacervation, the particulate systems for the dispensing of drugs consisting of natural polymers are nontoxic, allowing the repeated administration of medicinal substances and the protection of better the medicinal substances from degradation, which can increase the capture capacity of the drug and extend its release from the pharmaceutical form.

Production, Processing, and Protection of Microalgal n-3 PUFA-Rich Oil

Microalgae have been increasingly considered as a sustainable “biofactory” with huge potentials to fill up the current and future shortages of food and nutrition. They have become an economically and technologically viable solution to produce a great diversity of high-value bioactive compounds, including n-3 polyunsaturated fatty acids (PUFA). The n-3 PUFA, especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), possess an array of biological activities and positively affect a number of diseases, including cardiovascular and neurodegenerative disorders. As such, the global market of n-3 PUFA has been increasing at a fast pace in the past two decades. Nowadays, the supply of n-3 PUFA is facing serious challenges as a result of global warming and maximal/over marine fisheries catches. Although increasing rapidly in recent years, aquaculture as an alternative source of n-3 PUFA appears insufficient to meet the fast increase in consumption and market demand. Therefore, the cultivation of microalgae stands out as a potential solution to meet the shortages of the n-3 PUFA market and provides unique fatty acids for the special groups of the population. This review focuses on the biosynthesis pathways and recombinant engineering approaches that can be used to enhance the production of n-3 PUFA, the impact of environmental conditions in heterotrophic cultivation on n-3 PUFA production, and the technologies that have been applied in the food industry to extract and purify oil in microalgae and protect n-3 PUFA from oxidation.

Core-Shell Microcapsules from Unpurified Legume Flours

Plant-based ingredients are key building blocks for future sustainable advanced materials. Functionality is typically higher for highly purified plant-based ingredients, but this is at the expense of their sustainability value. Here, a method is introduced for creating a soft functional material, with structural elements ranging from the nanometer to the millimeter scale, directly from legume flours. Globulins from soy and pea flours are extracted in their native state at acidic pH and mixed with gum arabic, resulting in liquid-liquid phase separation into a dilute phase and a viscoelastic complex coacervate. Interfacial tensions of the coacervates, determined via AFM-based probing of capillary condensation, are found to be very low (γ = 48.5 and 32.3 μN/m for, respectively, soy and pea), thus promoting the deposition of a shell of coacervate material around oil droplets. Despite the complex nature of the starting material, the dependence of interfacial tensions on salt concentrations follows a scaling law previously shown to hold for model complex coacervates. Curing of the coacervate material into a strong and purely elastic hydrogel is shown to be possible via simple heating, both in bulk and as a shell around oil droplets, thus providing proof of principle for the fabrication of precise core-shell microcapsules directly from legume flours.

A unified analytical theory of heteropolymers for sequence-specific phase behaviors of polyelectrolytes and polyampholytes

The physical chemistry of liquid-liquid phase separation (LLPS) of polymer solutions bears directly on the assembly of biologically functional dropletlike bodies from proteins and nucleic acids. These biomolecular condensates include certain extracellular materials and intracellular compartments that are characterized as "membraneless organelles." Analytical theories are a valuable, computationally efficient tool for addressing general principles. LLPS of neutral homopolymers is quite well described by theory, but it has been a challenge to develop general theories for the LLPS of heteropolymers involving charge-charge interactions. Here, we present a theory that combines a random-phase-approximation treatment of polymer density fluctuations and an account of intrachain conformational heterogeneity based on renormalized Kuhn lengths to provide predictions of LLPS properties as a function of pH, salt, and charge patterning along the chain sequence. Advancing beyond more limited analytical approaches, our LLPS theory is applicable to a wide variety of charged sequences ranging from highly charged polyelectrolytes to neutral or nearly neutral polyampholytes. This theory should be useful in high-throughput screening of protein and other sequences for their LLPS propensities and can serve as a basis for more comprehensive theories that incorporate nonelectrostatic interactions. Experimental ramifications of our theory are discussed.

Development of Polymer Coacersome Structure with Enhanced Colloidal Stability for Therapeutic Protein Delivery

Poly(ethylene arginyl aspartate diglyceride) (PEAD) polycation is widely used to prepare coacervate particles by electrostatic complexation with an anionic heparin (HEP) in aqueous environments, for controlled release of therapeutic proteins. However, coacervate complexes aggregate randomly due to particle-particle charge interactions. Herein, a new term "coacersome" is introduced to represent a stable polyplex formed by complexation of mPEGylated PEAD and HEP. Methoxy polyethylene glycol (mPEG)-b-cationic PEAD diblock copolymers are synthesized and complexed with HEP to create a stable "coacersome" structure. Water-soluble mPEG moiety assembles on the surface of coacersomes in aqueous conditions and creates a steric barrier to avoid aggregation of coacersomes. The coacersomes are able to maintain their initial spherical morphology and size for longer durations in the presence of competing ions, such as 0.3 m NaCl. Additionally, the coacersomes exhibit biocompatibility toward human dermal fibroblasts, a high loading efficiency (>96%) for encapsulation of bone morphogenetic protein 2 (BMP-2), and a sustained release profile up to 28 days. The BMP-2-loaded coacersomes further exhibit increased osteogenic differentiation of human mesenchymal stem cells (hMSCs). The developed coacersome structures have the potential to be utilized as effective carriers for therapeutic protein delivery.