Pathogen-specific DNA sensing with engineered zinc finger proteins immobilized on a polymer chip

Covalently Attaching Hollow Silica Nanoparticles on a COC Surface for the Fabrication of a Three-Dimensional Protein Microarray

Compared to traditional two-dimensional (2D) biochips, three-dimensional (3D) biochips exhibit the advantages of higher probe density and detection sensitivity due to their designable surface microstructure as well as enlarged surface area. In the study, we proposed an approach to prepare a 3D protein chip by deposition of a monolayer of functionalized hollow silica nanoparticles (HSNs) on an activated cyclic olefin copolymer (COC) substrate. First, the COC substrate was chemically modified through the photografting technique to tether poly[3-(trimethoxysilyl) propyl methacrylate] (PTMSPMA) brushes on it. Then, a monolayer of HSNs was deposited on the modified COC and covalently attached via a condensation reaction between the hydrolyzed pendant siloxane groups of PTMSPMA and the Si-OH groups of HSNs. The roughness of the COC substrate significantly increased to 50.3 nm after depositing a monolayer of HSNs (ranging from 100 to 700 nm), while it only caused a negligible reduction in the light transmittance of COC. The HSN-modified COC was further functionalized with epoxide groups by a silane coupling agent for binding proteins. Immunoglobulin G could be effectively immobilized on this substrate with the highest immobilization efficiency of 75.2% and a maximum immobilization density of 1.236 μg/cm², while the highest immobilization efficiency on a 2D epoxide group-modified glass slide was only 57.4%. Moreover, immunoassay results confirmed a competitive limit of detection (LOD) (1.06 ng/mL) and a linear detection range (1-100 ng/mL) of the 3D protein chip. This facile and effective approach for fabricating nanoparticle-based 3D protein microarrays has great potential in the field of biorelated detection.

DNA origami-based protein manipulation systems: From function regulation to biological application

Proteins directly participate in tremendous physiological processes and mediate a variety of cellular functions. However, precise manipulation of proteins with predefined relative position and stoichiometry for understanding protein-protein interactions and guiding cellular behaviors are still challenging. With superior programmability of DNA molecules, DNA origami technology is able to construct arbitrary nanostructures that can accurately control the arrangement of proteins with various functionalities to solve these problems. Herein, starting from the classification of DNA origami nanostructures and the category of assembled proteins, we summarize the existing DNA origami-based protein manipulation systems (PMSs), review the advances on the regulation of their functions, and discuss their applications in cellular behavior modulation and disease therapy. Moreover, the limitations and potential directions of DNA origami-based PMSs are also presented, which may offer guidance for rational construction and ingenious application.

Application of Engineered Zinc Finger Proteins Immobilized on Paramagnetic Beads for Multiplexed Detection of Pathogenic DNA

Micro-scale magnetic beads are widely used for isolation of proteins, DNA, and cells, leading to the development of in vitro diagnostics. Efficient isolation of target biomolecules is one of the keys to developing a simple and rapid point-of-care diagnostic. A zinc finger protein (ZFP) is a double-stranded (ds) DNA-binding domain, providing a useful scaffold for direct reading of the sequence information. Here, we utilized two engineered ZFPs (Stx2-268 and SEB-435) to detect the Shiga toxin (stx2) gene and the staphylococcal enterotoxin B (seb) gene present in foodborne pathogens, Escherichia coli O157 and Staphylococcus aureus, respectively. Engineered ZFPs are immobilized on a paramagnetic bead as a detection platform to efficiently isolate the target dsDNA-ZFP bound complex. The small paramagnetic beads provide a high surface area to volume ratio, allowing more ZFPs to be immobilized on the beads, which leads to increased target DNA detection. The fluorescence signal was measured upon ZFP binding to fluorophore-labeled target dsDNA. In this study, our system provided a detection limit of ≤ 60 fmol and demonstrated high specificity with multiplexing capability, suggesting a potential for development into a simple and reliable diagnostic for detecting multiple pathogens without target amplification.

Graphene Oxide-Based Simple and Rapid Detection of Antibiotic Resistance Gene via Quantum Dot-Labeled Zinc Finger Proteins

With the increasing rise of antibiotic-resistant pathogens, a simple and rapid detection of antibiotic resistance gene (ARG) is crucial to mitigate the spreading of antibiotic resistance. DNA-binding zinc finger proteins (ZFPs) can be engineered to recognize specific double-stranded (ds) DNA sequences in ARG. Here, we designed a simple and rapid method to detect ARG in bacteria utilizing engineered ZFPs and 2D nanosheet graphene oxide (GO) as a sensing platform. Our approach relies on the on and off effect of fluorescence signal in the presence and absence of target ARG, respectively. By taking advantage of the unique quenching capability of GO due to its electronic property, quantum dot (QD)-labeled ZFPs are adsorbed onto the GO sheets, and their fluorescence signal is quenched by proximal GO sheets through fluorescence resonance energy transfer (FRET). In the presence of target DNA, ZFP binding to the target DNA induces dissociation from GO, thereby restoring the fluorescence signal. Our system detects target DNA through restoration of QD emission as the restored signal increases directly with target DNA concentrations. Engineered ZFPs were able to detect specific dsDNA of the tetracycline resistance gene tetM with high specificity after only 10 min incubation on our GO-based sensing system. Our sensing system employed one-step FRET-based ZFP and GO combined technology to enable rapid and quantitative detection of ARG, providing a limit of detection as low as 1 nM. This study demonstrated the application of GO in conjunction with engineered DNA-binding domains for the direct detection of dsDNA with great potential as a rapid and reliable screening and detecton method against the growing threat of antibiotic resistant bacteria.

Point-of-care diagnostics for infectious diseases: From methods to devices

The current widespread of COVID-19 all over the world, which is caused by SARS-CoV-2 virus, has again emphasized the importance of development of point-of-care (POC) diagnostics for timely prevention and control of the pandemic. Compared with labor- and time-consuming traditional diagnostic methods, POC diagnostics exhibit several advantages such as faster diagnostic speed, better sensitivity and specificity, lower cost, higher efficiency and ability of on-site detection. To achieve POC diagnostics, developing POC detection methods and correlated POC devices is the key and should be given top priority. The fast development of microfluidics, micro electro-mechanical systems (MEMS) technology, nanotechnology and materials science, have benefited the production of a series of portable, miniaturized, low cost and highly integrated POC devices for POC diagnostics of various infectious diseases. In this review, various POC detection methods for the diagnosis of infectious diseases, including electrochemical biosensors, fluorescence biosensors, surface-enhanced Raman scattering (SERS)-based biosensors, colorimetric biosensors, chemiluminiscence biosensors, surface plasmon resonance (SPR)-based biosensors, and magnetic biosensors, were first summarized. Then, recent progresses in the development of POC devices including lab-on-a-chip (LOC) devices, lab-on-a-disc (LOAD) devices, microfluidic paper-based analytical devices (μPADs), lateral flow devices, miniaturized PCR devices, and isothermal nucleic acid amplification (INAA) devices, were systematically discussed. Finally, the challenges and future perspectives for the design and development of POC detection methods and correlated devices were presented. The ultimate goal of this review is to provide new insights and directions for the future development of POC diagnostics for the management of infectious diseases and contribute to the prevention and control of infectious pandemics like COVID-19.

Facile Surface Functionalization of Cyclic Olefin Copolymer Film with Anhydride Groups for Protein Microarray Fabrication

Immobilization of protein at high efficiency is a challenge for fabricating polymer-based protein chips. Here, a simple but effective approach was developed to fabricate a cyclic olefin copolymer (COC)-based protein microarray with a high immobilization density. In this strategy, poly(maleic anhydride-co-vinyl acetate) (poly(MAH-co-VAc)) brushes were facilely attached on the COC surface via UV-induced graft copolymerization. The introduction of poly(MAH-co-VAc) brushes resulted in an obvious increase in the surface roughness of COC. The functionalized COC showed little reduction in transparency compared with pristine COC, indicating that the photografting treatment did not alter its optical property. The graft density of the anhydride groups on the modified COC could be tuned from 0.46 to 3.2 μmol/cm². The immobilization efficiency of immunoglobulin G (IgG) on functionalized COC reached 88% due to the high reactivity between anhydride groups and amine groups of IgGs. An immunoassay experiment demonstrated that the microarray showed high sensitivity to the target analyte.