TPE conjugated islet amyloid polypeptide probe for detection of peptide oligomers

Islet amyloid polypeptide (IAPP), also known as amylin, is a polypeptide hormone co-secreted with insulin by pancreatic β-cells. In general, IAPP is soluble and lacks a defined structure. However, under certain conditions, these peptides tend to aggregate into soluble oligomers, eventually forming insoluble amyloid fibrils with typical cross-β-sheet structures. Amylin aggregates, therefore, have been regarded as one of the hallmarks of type II diabetes (T2D). Among these aggregated species, oligomers were shown to exhibit significant cytotoxicity, leading to impaired β-cell function and reduced β-cell mass. Monitoring of oligomer appearance during IAPP fibrillation is of particular interest. In this study, we successfully grafted an aggregation-induced emission molecule, tetraphenylethylene (TPE), at the N-terminus of IAPP. By mixing a small amount of TPE-labeled IAPP with unlabeled IAPP, we were able to detect an increase in TPE fluorescence during the nucleation phase of IAPP aggregation in vitro. It may enable real-time monitoring of IAPP oligomer formation and is further applied in the diagnosis of T2D.

Stimulus-responsive peptide hydrogels: a safe and least invasive administration approach for tumor treatment

Tumours, with increasing mortality around the world, have bothered human beings for decades. Enhancing the targeting of antitumor drugs to tumour tissues is the key to enhancing their antitumor effects. The tumour microenvironment is characterised by a relatively low pH, overexpression of certain enzymes, redox imbalance, etc. Therefore, smart drug delivery systems that respond to the tumour microenvironment have been proposed to selectively release antitumor drugs. Among them, peptide hydrogels as a local drug delivery system have received much attention due to advantages such as high biocompatibility, degradability and high water-absorbing capacity. The combination of peptide segments with different physiological functions allows for tumour targeting, self-aggregation, responsiveness, etc. Morphological and microstructural changes in peptide hydrogels can occur when utilising the inherent pathological microenvironment of tumours to trigger drug release, which endows such systems with limited adverse effects and improved therapeutic efficiency. Herein, this review outlined the driving forces, impact factors, and sequence design in peptide hydrogels. We also discussed the triggers to induce the transformation of peptide-based hydrogels in the tumour microenvironment and described the advancements of peptide-based hydrogels for local drug delivery in tumour treatment. Finally, we gave a brief perspective on the prospects and challenges in this field.

Self-Assembly of the Tetraphenylethylene-Capped Diserine through a Hierarchical Assembly Process

We report a new peptide-based urchin-shaped structure prepared through two-step self-assembly of tetraphenylethylene-diserine (TPE-SS). Hydrogelation generated nanobelts through the first stage of self-assembly of TPE-SS; these nanobelts further transformed on silicon wafers into urchin-like microstructures featuring nanosized spines. The presence of the TPE moiety in the hydrogelator resulted in aggregation-induced emission characteristics both in the solution and in the gel phases. TPE-SS has the lowest molecular weight of any TPE-capped hydrogelator with β-sheet-like structures under physiological pH. This new design strategy appears to be useful for generating three-dimensional self-assembled microstructures and multifunctional biomaterials. We found that TPE-SS is biocompatible with human mesenchymal stem cells and breast cancer cells, making them potential applications in tissue engineering and biomedical research.

An Oligopeptide-Protected Ultrasmall Gold Nanocluster with Peroxidase-Mimicking and Cellular-Imaging Capacities

Recent decades have witnessed the rapid progress of nanozymes and their high promising applications in catalysis and bioclinics. However, the comprehensive synthetic procedures and harsh synthetic conditions represent significant challenges for nanozymes. In this study, monodisperse, ultrasmall gold clusters with peroxidase-like activity were prepared via a simple and robust one-pot method. The reaction of clusters with H₂O₂ and 3,3',5,5'-tetramethylbenzidine (TMB) followed the Michaelis-Menton kinetics. In addition, in vitro experiments showed that the prepared clusters had good biocompatibility and cell imaging ability, indicating their future potential as multi-functional materials.

Efficient Hydro- and Organogelation by Minimalistic Diketopiperazines Containing a Highly Insoluble Aggregation-Induced, Blue-Shifted Emission Luminophore*

We report the synthesis, gelation abilities and aggregation‐induced, blue‐shifted emission (AIBSE) properties of two minimalistic diketopiperazine‐based gelators. Despite containing a highly insoluble luminophore that makes up more than half of their respective molecular masses, efficient hydrogelation by multiple stimuli for one and efficient organogelation for the other compound are reported. Insights into the aggregation and gelation properties were gained through examination of the photophysical and material properties of selected gels, which are representative of the different modes of gelation. The synthesis of the gelators is highly modular and based on readily available amino acid building blocks, allowing the efficient and rapid diversification of these core structures and fine‐tuning of gel properties.

Integrin α2β1 Targeting DGEA-Modified Liposomal Doxorubicin Enhances Antitumor Efficacy against Breast Cancer

Breast cancer was the leading cause of newly diagnosed cases of tumors in 2020, ranking as the second highest cause of female death. Chemotherapy remains the conventional treatment of choice for breast tumors in most clinical cases. However, it is often accompanied by a poor prognosis and severe side effects, resulting from an insufficient accumulation of the drug at tumor sites and an unsystematic distribution of the drug across the body. Inspired by the fact that breast tumor cells overexpress integrin α2β1 on the surface, we designed and constructed an integrin α2β1 targeting DGEA-modified liposomal doxorubicin (DGEA-Lipo-DOX) platform for application in breast cancer therapy. The DGEA-Lipo-DOX was stable with a uniform particle size of 121.1 ± 3.8 nm and satisfactory drug encapsulation. Demonstrated in vitro and in vivo, the constructed platform exhibited improved antitumor ability. The DGEA-Lipo-DOX showed 4-fold enhanced blood circulation and 6-fold increased accumulation of DOX at the tumor sites compared to those of free DOX, resulting in a significantly enhanced antitumor efficacy in tumor-bearing mice. A preliminary safety evaluation suggested that the systemic toxicity of DOX was relieved by DGEA-Lipo delivery. Collectively, binding integrin α2β1 by DGEA may represent an alternative therapeutic strategy for potentially safer breast cancer treatment.

Peptide-Engineered Fluorescent Nanomaterials: Structure Design, Function Tailoring, and Biomedical Applications

Fluorescent nanomaterials have exhibited promising applications in biomedical and tissue engineering fields. To improve the properties and expand bioapplications of fluorescent nanomaterials, various functionalization and biomodification strategies have been utilized to engineer the structure and function of fluorescent nanomaterials. Due to their high biocompatibility, satisfied bioactivity, unique biomimetic function, easy structural tailoring, and controlled self-assembly ability, supramolecular peptides are widely used as versatile modification agents and nanoscale building blocks for engineering fluorescent nanomaterials. In this work, recent advance in the synthesis, structure, function, and biomedical applications of peptide-engineered fluorescent nanomaterials is presented. Firstly, the types of different fluorescent nanomaterials are introduced. Then, potential strategies for the preparation of peptide-engineered fluorescent nanomaterials via templated synthesis, bioinspired conjugation, and peptide assembly-assisted synthesis are discussed. After that, the unique structure and functions through the peptide conjugation with fluorescent nanomaterials are demonstrated. Finally, the biomedical applications of peptide-engineered fluorescent nanomaterials in bioimaging, disease diagnostics and therapy, drug delivery, tissue engineering, antimicrobial test, and biosensing are presented and discussed in detail. It is helpful for readers to understand the peptide-based conjugation and bioinspired synthesis of fluorescent nanomaterials, and to design and synthesize novel hybrid bionanomaterials with special structures and improved functions for advanced applications.

Substrate stiffness and sequence dependent bioactive peptide hydrogels influence the chondrogenic differentiation of human mesenchymal stem cells

N-Cadherin mimetic nanofibrous biocompatible peptide hydrogels with enhanced mechanical properties for differentiation of mesenchymal stem cells into chondrocytes.

Dissipative aggregation-induced emission behaviour of an amino-functionalized tetraphenylethene using a pH oscillator

A dissipative aggregation-induced emission (DAIE) system is successfully fabricated by coupling a stimuli-responsive AIE luminogens (AIEgens) with a pH oscillator. The novel DAIE system exhibits reversible, autonomous and sustainable AIE behaviour. Moreover, the DAIE behaviour can be regulated with the system temperature. The novel strategy will boost the development of bioinspired intelligent systems for real-world applications.

Nanomaterials with Supramolecular Assembly Based on AIE Luminogens for Theranostic Applications

One of the major pursuits of biomedical science is to develop advanced strategies for theranostics, which is expected to be an effective approach for achieving the transition from conventional medicine to precision medicine. Supramolecular assembly can serve as a powerful tool in the development of nanotheranostics with accurate imaging of tumors and real-time monitoring of the therapeutic process upon the incorporation of aggregation-induced emission (AIE) ability. AIE luminogens (AIEgens) will not only enable fluorescence imaging but will also aid in improving the efficacy of therapies. Furthermore, the fluorescent signals and therapeutic performance of these nanomaterials can be manipulated precisely owing to the reversible and stimuli-responsive characteristics of the supramolecular systems. Inspired by rapid advances in this field, recent research conducted on nanotheranostics with the AIE effect based on supramolecular assembly is summarized. Here, three representative strategies for supramolecular nanomaterials are presented as follows: a) supramolecular self-assembly of AIEgens, b) the loading of AIEgens within nanocarriers with supramolecular assembly, and c) supramolecular macrocycle-guided assembly via host-guest interactions. Meanwhile, the diverse applications of such nanomaterials in diagnostics and therapeutics have also been discussed in detail. Finally, the challenges of this field are listed in this review.

The impact of altered mechanobiology on aortic valve pathophysiology

Calcific aortic valve disease (CAVD) is the most prevalent valvulopathy worldwide. Until recently, CAVD was viewed as a passive, degenerative process and an inevitable consequence of aging. Recent improvements in disease modeling, imaging, and analysis have greatly enhanced our understanding of CAVD. The aortic valve and its constituent cells are subjected to extreme changes in mechanical forces, so it follows that any changes in the underlying mechanobiology of the valve and its cells would have dire effects on function. Further, the mechanobiology of the aortic valve is intimately intertwined with numerous molecular pathways, with signal transduction between these aspects afforded by the dynamic plasma membrane. Changes to the plasma membrane itself, its regulation of the extracellular matrix, or the relay of signals into or out of the cell would negatively impact cell and tissue function.

PURPOSE OF REVIEW

This review seeks to detail past and current published reports related to the mechanobiology of the aortic valve with a special emphasis on the implications of altered mechanobiology in the context of calcific aortic valve disease.

RECENT FINDINGS

Investigations characterizing membrane composition and dynamics have provided new insights into the earliest stages of calcific aortic valve disease. Recent studies have suggested that the activation or suppression of key pathways contribute to disease progression but may also offer therapeutic targets.

SUMMARY

This review highlights the critical involvement of mechanobiology and membrane dynamics in normal aortic valve physiology as well as valve pathology.

Probing two PESIN-indocyanine-dye-conjugates: significance of the used fluorophore

Peptide-dye-conjugates hold a great promise in application for biological and medical imaging of cellular processes and in delineation and characterization of human tumors. In particular, indocyanine dyes are of great interest due to their reported superior properties such as absorption and emission in the near-infrared (NIR) spectral range, favorable Stokes shifts and their well-studied safety profile in humans. In this study, we investigated and describe the influence of indocyanine dyes on different properties of the final peptide-dye-conjugates. As a target peptide, PESIN, a bombesin derivative, was used as a model peptide which addresses GRP receptors overexpressed on different malignancies. Here, we map similarities and differences of the fluorescent conjugates and by this elucidate the influence of the dyes on different properties of the formed conjugates. We performed the dye syntheses, subsequent bioconjugation reactions and in the following investigated the optical properties, water/octanol distribution coefficients and target receptor affinities by in vitro competitive binding studies on PC-3 cells. The obtained results give a handrail to medical and biological researchers planning studies involving indocyanine dye biomolecule conjugates.

Thiophene-containing tetraphenylethene derivatives with different aggregation-induced emission (AIE) and mechanofluorochromic characteristics

Four thiophene-containing tetraphenylethene derivatives were successfully synthesized and characterized. All these highly fluorescent compounds showed typical aggregation-induced emission (AIE) characteristics and emitted different fluorescence colors including blue-green, green, yellow and orange in the aggregation state. In addition, these luminogens also exhibited various mechanofluorochromic phenomena.

Four thiophene-containing AIE-active TPE derivatives were synthesized. Furthermore, these luminogens exhibited various mechanofluorochromic phenomena.