Facile One-Step Microwave-Assisted Method to Synthesize Nickel Selenide Nanosheets for High-Performance Hybrid Supercapacitor

Nanosheets structures can be employed as the most promising electrode material to enhance electrochemical performance for supercapacitors. Nickel Selenide (Ni_0.85Se) nanosheets are synthesized using a rapid microwave synthesis method in a single step. The Ni_0.85Se nanosheets possess a high surface area (125 m²g^-1) with a hexagonal crystalline structure. It shows magnificent electrochemical properties, such as splendid specific capacitance (2530 Fg^-1 at 0.5 Ag^-1). An asymmetric hybrid supercapacitor is fabricated with nickel selenide nanosheets as a positive electrode and activated carbon as a negative electrode. The assembled hybrid supercapacitor displays a high energy density of 63.5 WhKg^-1 at a power density of 404 WKg^-1, and after 8000 cycles, only 5% capacitance is lost along with the better voltage window at 0-1.6 V.

In-situ construction of heterostructure (Ni, Co)Se2 nanoarrays derived from cone-like ZIF-L for high-performance hybrid supercapacitors

The construction of heterostructure could enhance the electron transfer efficiency and increase the number of active sites, which can further develop high-performance electrode materials of supercapacitors. Herein, (Ni, Co)Se₂ nanorod arrays were prepared based on the NiCo-LDH derived from a conical ZIF-L. Significantly, the single nanorod is composed of interconnected NiSe₂ and CoSe₂ nanoparticles, the heterostructure can expose higher conductivity, more sufficient redox reaction active sites and larger specific surface area. The as-obtained CF@(Ni, Co)Se₂ achieved a high specific capacity of 188.8 mAh g^-1 at the current density of 1.0 A g^-1 and an outstanding cycling stability with a high capacity retention of 90% after 8000 cycles. Finally, an hybrid supercapacitor device composed of activated carbon (AC) as negative electrode and CF@(Ni, Co)Se₂ as positive electrode was designed, which revealed an ideal voltage window of 0-1.6 V and exhibited a great energy density of 36.02 Wh kg^-1 at the power density of 800 W kg^-1, such surpassing energy storage characteristics evidently testify that (Ni, Co)Se₂ nanorod arrays can be as the potential electrode material to promote the development of high-performance supercapacitors.

NiSe2 Nanoparticles Encapsulated in N-Doped Carbon Matrix Derived from a One-Dimensional Ni-MOF: An Efficient and Sustained Electrocatalyst for Hydrogen Evolution Reaction

The spherical-type NiSe₂ nanoparticles encapsulated in a N-doped carbon (NC) matrix (NiSe₂-T@NC, temperature (T) = 400-800 °C) are derived from a 1D Ni-MOF precursor of the formula [Ni(BPY)(DDE)] [(BPY = 2,2'-bipyridyl), (DDE = 4,4'-dicarboxy diphenyl ether)] via a facile solvothermal technique followed by annealing at different temperatures and selenylation strategies. The combined effect of a NC matrix and the Ni nanoparticles has been optimized during varied annealing processes with subsequent selenylation, leading to the formation of the series NiSe₂-400@NC, NiSe₂-500@NC, NiSe₂-600@NC, NiSe₂-700@NC, and NiSe₂-800@NC, respectively. The variation of annealing temperature plays a vital role in optimizing the catalytic behavior of the NiSe₂-T@NCs. Among different high-temperature annealed products, NiSe₂-600@NC shows superior electrocatalytic performance because of the unique spherical-type morphology and higher specific surface area (57.95 m² g^-1) that provides a large number of electrochemical active sites. The synthesized material exhibits a lower overpotential of 196 mV to deliver 10 mA cm^-2 current density, a small Tafel slope of 45 mV dec^-1 for better surface kinetics, and outstanding durability in an acidic solution, respectively. Consequently, the post stability study of the used electrocatalyst gives insight into surface phase analysis. Therefore, we presume that the synthesized 1D MOF precursor derived NiSe₂ nanoparticles encapsulated in a NC matrix has excellent potential to replace the noble-metal-based electrocatalyst for enhanced hydrogen evolution through simple water electrolysis.

Synthesis of bimetallic nickel cobalt selenide particles for high-performance hybrid supercapacitors

Supercapacitors are known as promising excellent electrochemical energy storage devices because of their attractive features, including quick charge and discharge, high power density, low cost and high security. In this work, a series of litchi-like Ni-Co selenide particles were synthesized via a simple solvothermal method, and the Ni-Co compositions were carefully optimized to tune the charge storage performance, charge storage kinetics, and conductivity for battery-like supercapacitors. Interestingly, the optimal sample Ni0.95Co2.05Se4 exhibits a high capacity of 1038.75 F g-1 at 1 A g-1 and superior rate performance (retains 97.8% of the original capacity at 4 A g-1). Moreover, an asymmetric supercapacitor device was assembled based on the Ni0.95Co2.05Se4 cathode and activated carbon anode. The device of Ni0.95Co2.05Se4//active carbon (AC) reveals a peak energy density of 37.22 W h kg-1, and the corresponding peak power density reaches 800.90 W kg-1. This work provides a facile and effective way to synthesize transition metal selenides as high-performance supercapacitor electrode materials.

Galvanic Replacement Reaction and Kirkendall Effect in Room Temperature Synthesis of Tubular NiSe2: A Nanozyme Catalyst with Peroxidase-Like Activity

Synthesis of nickel selenide nanostructure in ambient condition remains fascinating, aesthetically beautiful and energy efficient as most of the reported methods involve high temperature techniques. In this work we have...

Scalable CNTs/NiCoSe2 Hybrid Films for Flexible All-Solid-State Asymmetric Supercapacitors

The rapidly developing wearable flexible electronics makes the development of high-performance flexible energy storage devices, such as all-solid-state supercapacitors (SCs), particularly important. Herein, we report the fabrication of CNTs/NiCoSe₂ hybrid films on carbon cloth (CC) through a facile co-electrodeposition method based on flexible electrodes for all-solid-state SCs. The NiCoSe₂ sheets grown on CNTs uniformly with a diameter of 50-100 nm act as the active materials. The CNTs in the hybrid films act as the scaffold to offer more deposition sites for NiCoSe₂ and provide a conductive network to facilitate the transfer of electrons. Moreover, the one-step electrodeposition process avoids the usage of any organic binders. Benefiting from the high intrinsic reactivity and unique 3D architecture, the obtained CNTs/NiCoSe₂ electrode delivers high specific capacity (218.1 mA h g^-1) and satisfactory durability (over 5000 cycles). Remarkably, the CNTs/NiCoSe₂//AC flexible all-solid-state (FASS) ASC provides remarkable energy density (112.2 W h kg^-1) within 0-1.7 V and maintains 98.1% of its initial capacity after 10,000 cycles. In addition, this flexible ASC device could be fabricated at a large scale (5 × 6 cm²), and the LED arrays (>3.7 V) can be easily lighted up by three ASCs in series, showing its potential practical application.

Emergence of Ni-Based Chalcogenides (S and Se) for Clean Energy Conversion and Storage

Nickel chalcogenide (S and Se) based nanostructures intrigued scientists for some time as materials for energy conversion and storage systems. Interest in these materials is due to their good electrochemical stability, eco-friendly nature, and low cost. The present review compiles recent progress in the area of nickel-(S and Se)-based materials by providing a comprehensive summary of their structural and chemical features and performance. Improving properties of the materials, such as electrical conductivity and surface characteristics (surface area and morphology), through strategies like nano-structuring and hybridization, are systematically discussed. The interaction of the materials with electrolytes, other electro-active materials, and inactive components are analyzed to understand their effects on the performance of energy conversion and storage devices. Finally, outstanding challenges and possible solutions are briefly presented with some perspectives toward the future development of these materials for energy-oriented devices with high performance.

Electronic modulation of nickel selenide by copper doping and in situ carbon coating towards high-rate and high-energy density lithium ion half/full batteries

Over the past decades, metal selenides have drawn considerable attention due to their high theoretical specific capacity. However, huge volume changes and sluggish electrochemical transfer kinetics hinder their applications in energy storage and conversion. In this work, we demonstrate an efficient and ingenious synthesis strategy to regulate nickel selenide electrodes by the introduction of copper and in situ coating with carbon (Cu-NiSe2@C). When used as anodes for lithium-ion batteries, the as-synthesized Cu-NiSe2@C delivered a high capacity of 1630 mA h g-1 at 1.0 A g-1 after 200 cycles and excellent rate performance as well as long-term cycling stability with a high capacity of 489 mA h g-1 at 10 A g-1 after 20 000 cycles. When coupled with a commercial LiFePO4 cathode, the full cells showed a high capacity of 463 mA h g-1 at 0.2 A g-1. Their superior electrochemical performance can be attributed to the synergistic effect of the in situ carbon coating and copper doping, which can promote the electron/ion transfer kinetics, as well as alleviate the volume expansion during cycling. This work will open new opportunities for the development of high-performance anodes for lithium storage.

The role of carbon nanotubes in enhanced charge storage performance of VSe2: experimental and theoretical insight from DFT simulations

Herein, we report the hybrid structure of metallic VSe₂ and multi-walled carbon nanotube (MWCNT) based hybrid materials for high performance energy storage and high power operation applications. The dominance of capacitive energy storage performance behaviour of VSe₂/MWCNT hybrids is observed. A symmetric supercapacitor cell device fabricated using VSe₂/80 mg MWCNT delivered a high energy density of 46.66 W h kg^-1 and a maximum power density of 14.4 kW kg^-1 with a stable cyclic operation of 87% after 5000 cycles in an aqueous electrolyte. Using density functional theory calculations we have presented structural and electronic properties of the hybrid VSe₂/MWCNT structure. Enhanced states near the Fermi level and higher quantum capacitance for the hybrid structure contribute towards higher energy and power density for the nanotube/VSe₂.

Hierarchical NiSe2 Nanosheet Arrays as a Robust Cathode toward Superdurable and Ultrafast Ni-Zn Aqueous Batteries

Zn-based aqueous batteries are enjoying the hotspots of worldwide research as their significant merits in economic cost and safety. However, the lack of a robust cathode (positive electrode) owning excellent rate ability, high capacity, and stability challenges their practical application. Herein, we propose hierarchical NiSe₂ nanosheet arrays as a robust cathode toward high-performance Ni-Zn aqueous batteries. Attributed to in situ anion exchange and Kirkendall effects, the nanosheet arrays are hierarchically constructed by NiSe₂ nanoparticles and abundant mesopores, which fully expose the active sites and accelerate the electrode kinetics. This unique structure endows the NiSe₂ electrode with remarkable specific capacity (245.1 mAh g^-1) and extraordinary high-rate ability (maintains 58% at 72.8 A g^-1) together with 10,000 cycles without any obvious capacity degeneration. As a result, based on the total active weight, our NiSe₂//Zn battery is capable of record-high power density (91.22 kW kg^-1/639.1 mW cm^-2), imposing energy density (328.8 Wh kg^-1/2.303 mWh cm^-2), and ultralong lifespan (only 8.3% capacity loss after 10,000 cycles), surpassing most of the aqueous batteries and supercapacitors recently reported. Moreover, this NiSe₂//Zn battery is also affordable (US$40 per kWh) and safe. These results open a new avenue for developing superdurable and ultrafast high-energy Ni-Zn batteries toward affordable and practical energy storage.

NiSe2-anchored N, S-doped graphene/Ni foam as a free-standing bifunctional electrocatalyst for efficient water splitting

It is still challenging to develop non-precious free-standing bifunctional electrocatalysts with high efficiency for hydrogen and oxygen evolution reactions. Herein, for the first time, we present a novel hybrid electrocatalyst synthesized via a facile hydrothermal reaction, which is constructed from ultrafine NiSe2 nanoparticles/nanosheets homogeneously anchored on 3D graphene/nickel foam (NiSe2/3DSNG/NF). This hybrid delivers superior catalytic performances for hydrogen/oxygen evolution reactions and overall water splitting: it shows an ultra-small Tafel slope of 28.56 mV dec-1 for hydrogen evolution in acid, and a small Tafel slope of 42.77 mV dec-1 for the oxygen evolution reaction; particularly, in a two-electrode setup for water splitting, it requires an ultra-small potential of 1.59 V to obtain 10 mA cm-2 with nearly 100% faradaic efficiencies for H2 and O2. This study presents a new approach of catalyst design and fabrication to achieve highly efficient and low-cost water electrolysis.

Electronegativity principles in metal oxides based supercapacitors

To meet growing demands for energy consumptions in modern society, it is necessary to develop different energy sources. Renewable energy such as wind and solar sources are intermittent, therefore, energy storage devices become more and more important to store energy for use when no wind or no light. Supercapacitors play a key role in energy storage, mainly due to their high power density and long cycling life. However, supercapacitors are facing the obstacle of low energy density, one of the most intensive approaches is to rationally design new electrode materials. In this review, we focus on metal oxides-based materials and present an electronegativity criterion for the design and appropriate selection of new electrode chemical compositions. Metal elements with proper electronegativity scale have the potential to transfer electron for energy storage. Suitable positive and negative electrodes matching can enhance many properties of supercapacitors, which may overcome many related obstacles. Furthermore, electronegativity scale may also help people to find novel metal oxides based supercapacitors.

Nanoneedle-decorated NiCo-layered double hydroxide microspheres tuned as high-efficiency electrodes for pseudocapacitors

Nanoneedle-decorated flower-like NiCo-LDH microspheres are tuned by varying the amounts of NH₄F, providing tunable electrochemical performance for their use as electrodes for pseudocapacitors.

Facile one-pot synthesis of NiCo2Se4-rGO on Ni foam for high performance hybrid supercapacitors

A facile, innovative synthesis for the fabrication of NiCo₂Se₄-rGO on a Ni foam nanocomposite via a simple hydrothermal reaction is proposed. The as-prepared NiCo₂Se₄-rGO@Ni foam electrode was tested through pxrd, TEM, SEM, and EDS to characterize the morphology and the purity of the material. The bimetallic electrode exhibited outstanding electrochemical performance with a high specific capacitance of 2038.55 F g⁻¹ at 1 A g⁻¹. NiCo₂Se₄-rGO@Ni foam exhibits an extensive cycling stability after 1000 cycles by retaining 90% of its initial capacity. A superior energy density of 67.01 W h kg⁻¹ along with a high power density of 903.61 W kg⁻¹ further proved the high performance of this electrode towards hybrid supercapacitors. The excellent electrochemical performance of NiCo₂Se₄-rGO@Ni foam can be explained through the high electrocatalytic activity of NiCo₂Se₄ in combination with reduced graphene oxide which increases conductivity and surface area of the electrode. This study proved that NiCo₂Se₄-rGO@Ni foam can be utilized as a high energy density-high power density electrode in energy storage applications.

A hybrid supercapacitor comprising a NiCo₂Se₄-rGO composite has been fabricated on Ni foam and shows high energy and power density and superior flexibility.