Zinc ion Batteries: Bridging the Gap from Academia to Industry for Grid-Scale Energy Storage

Zinc ion batteries (ZIBs) exhibit significant promise in the next generation of grid-scale energy storage systems owing to their safety, relatively high volumetric energy density, and low production cost. Despite substantial advancements in ZIBs, a comprehensive evaluation of critical parameters impacting their practical energy density (Epractical) and calendar life is lacking. Hence, we suggest using formulation-based study as a scientific tool to accurately calculate the cell-level energy density and predict the cycling life of ZIBs. By combining all key battery parameters, such as the capacity ratio of negative to positive electrode (N/P), into one formula, we assess their impact on Epractical. When all parameters are optimized, we urge to achieve the theoretical capacity for a high Epractical. Furthermore, we propose a formulation that correlates the N/P and Coulombic efficiency of ZIBs for predicting their calendar life. Finally, we offer a comprehensive overview of current advancements in ZIBs, covering cathode and anode, along with practical evaluations. This Minireview outlines specific goals, suggests future research directions, and sketches prospects for designing efficient and high-performing ZIBs. It aims at bridging the gap from academia to industry for grid-scale energy storage.

High-Performance Zinc-Ion Hybrid Supercapacitor from Guilin Sanhua Liquor Lees-Derived Carbon Materials

Aqueous zinc-ion hybrid supercapacitors (ZHSCs) have attracted considerable attention because they are inexpensive and safe. However, the inadequate energy densities, power densities, and cycling performance of current ZHSC energy-storage devices are impediments that need to be overcome to enable the further development and commercialization of this technology. To address these issues, in this study, we prepared carbon-based ZHSCs using a series of porous carbon materials derived from Sanhua liquor lees (SLPCs). Among them, the best performance was observed for SLPC-A13, which exhibited excellent properties and a high-surface-area structure (2667 m2 g-1) with abundant micropores. The Zn//SLPC-A13 device was assembled by using 2 mol L-1 ZnSO4, SLPC-A13, and Zn foil as the electrolyte, cathode, and anode, respectively. The Zn//SLPC-A13 device delivered an ultrahigh energy density of 137 Wh kg-1 at a power density of 462 W kg-1. Remarkably, Zn//SLPC-A13 retained 100% of its specific capacitance after 120,000 cycles of long-term charge/discharge testing, with 62% retained after 250,000 cycles. This outstanding performance is primarily attributed to the SLPC-A13 carbon material, which promotes the rapid adsorption and desorption of ions, and the charge-discharge process, which roughens the Zn anode in a manner that improves reversible Zn-ion plating/stripping efficiency. This study provides ideas for the preparation of ZHSC cathode materials.

Achieving Highly Stable Zn Metal Anodes at Low Temperature via Regulating Electrolyte Solvation Structure

Zinc metal is an attractive anode material for rechargeable aqueous Zn-ion batteries (ZIBs). However, the dendrite growth, water-induced parasitic reactions, and freezing problem of aqueous electrolyte at low temperatures are the major roadblocks that hinder the widely commercialization of ZIBs. Herein, tetrahydrofuran (THF) is proposed as the electrolyte additive to improve the reversibility and stability of Zn anode. Theoretical calculation and experimental results reveal that the introduction of THF into the aqueous electrolyte can optimize the solvation structure which can effectively alleviate the H2O-induced side reactions and protect the Zn anode from corrosion. Moreover, THF can act as a hydrogen bond acceptor to interact with H2O, which can greatly reduce the activity of free H2O in electrolytes and improve the low-temperature electrochemical performance of Zn anode. As a result, the Zn anodes demonstrate high cyclic stability for 2800 h at 27 °C and over 4000 h at -10 °C at 1.0 mA cm-2 /1.0 mAh cm-2. The full cell exhibits excellent cyclic stability and rate capability at 27 and -10 °C. This work is expected to provide a new approach to regulate the aqueous electrolyte and Zn anode interface chemistry for highly stable and reversible Zn anodes.

Hybrid-Electrolytes System Established by Dual Super-lyophobic Membrane Enabling High-Voltage Aqueous Lithium Metal Batteries

Aqueous electrolytes and related aqueous rechargeable batteries own unique advantage on safety and environmental friendliness, but coupling high energy density Li-metal batteries with aqueous electrolyte still represent challenging and not yet reported. Here, this work makes a breakthrough in "high-voltage aqueous Li-metal batteries" (HVALMBs) by adopting a brilliant hybrid-electrolytes strategy. Concentrated ternary-salts ether-based electrolyte (CTE) acts as the anolyte to ensure the stability and reversibility of Li-metal plating/stripping. Eco-friendly water-in-salt (WiS) electrolyte acts as catholyte to support the healthy operation of high-voltage cathodes. Most importantly, the aqueous catholyte and non-aqueous anolyte are isolated in each independent chamber without any crosstalk. Aqueous catholyte permeation toward Li anode can be completely prohibited without proton-induced corrosion, which is enabled by the introduction of under-liquid dual super-lyophobic membrane-based separator, which can realize the segregation of the most effective immiscible electrolytes with a surface tension difference as small as 6 mJ m-2. As a result, the aqueous electrolyte can be successfully coupled with Li-metal anode and achieve the fabrication of HVALMBs (hybrid-electrolytes system), which presents long-term cycle stability with a capacity retention of 81.0% after 300 cycles (LiNi0.8Mn0.1Co0.1O2 || Li (limited) cell) and high energy density (682 Wh kg-1).

Design of Organic Cathode Material Based on Quinone and Pyrazine Motifs for Rechargeable Lithium and Zinc Batteries

Despite the rapid expansion of the organic cathode materials field, we still face a shortage of materials obtained through simple synthesis that have stable cycling and high energy density. Herein, we report a two-step synthesis of a small organic molecule from commercially available precursors that can be used as a cathode material. Oxidized tetraquinoxalinecatechol (OTQC) was derived from tetraquinoxalinecatechol (TQC) by the introduction of additional quinone redox-active centers into the structure. The modification increased the voltage and capacity of the material. The OTQC delivers a high specific capacity of 327 mAh g-1 with an average voltage of 2.63 V vs Li/Li+ in the Li-ion battery. That corresponds to an energy density of 860 Wh kg-1 on the OTQC material level. Furthermore, the material demonstrated excellent cycling stability, having a capacity retention of 82% after 400 cycles. Similarly, the OTQC demonstrates increased average voltage and specific capacity in comparison with TQC in aqueous Zn-organic battery, reaching the specific capacity of 326 mAh g-1 with an average voltage of 0.86 V vs Zn/Zn2+. Apart from good electrochemical performance, this work provides an additional in-depth analysis of the redox mechanism and degradation mechanism related to capacity fading.

Polymer Molecules Adsorption-Induced Zincophilic-Hydrophobic Protective Layer Enables Highly Stable Zn Metal Anodes

Zn metal, as one of the most promising anode materials for aqueous batteries, suffers from uncontrollable dendrite growth and water-induced parasitic reactions, which drastically compromise its cycle life and Coulombic efficiency (CE). Herein, a nonionic amphipathic additive Tween-20 (TW20) is proposed that bears both zincophilic and hydrophobic units. The zincophilic segment of TW20 preferentially adsorbs on the Zn anode, while the hydrophobic segment is exposed on the electrolyte side, forming an electrolyte-facing hydrophobic layer that shields the anode from active water molecules. Moreover, theoretical calculation and experimental results reveal that the TW20 additive can induce the preferential growth of (002) plane by adsorbing on other facets, enabling dendrite-free Zn anodes. Benefitting from these advantages, the stability and reversibility of Zn anodes are substantially improved, reflected by stable cycling for over 2500 h at 1.0 mA cm-2/1.0 mAh cm-2 and 500 h at 5 mA cm-2/5 mAh cm-2 as well as an average CE of 99.4% at 1.0 mA cm-2/1.0 mAh cm-2. The full cells paired with MnO2 demonstrate a long lifespan for more than 700 cycles at 500 mA g-1. This work is expected to provide a new approach to modulate Zn electrode interface chemistry for highly stable Zn anodes.

Hierarchically Porous Carbon Rods Derived from Metal-Organic Frameworks for Aqueous Zinc-Ion Hybrid Capacitors

Aqueous zinc-ion hybrid capacitors (ZIHCs), as ideal candidates for high energy-power supply systems, are restricted by unsatisfied energy density and poor cycling durability for further applications. The construction of a surface-functionalized carbon cathode is an effective strategy for improving the performance of ZIHCs. Herein, a high-performance ZIHC is achieved using oxygen-rich hierarchically porous carbon rods (MDPC-X) prepared by the pyrolysis of a metal-organic framework (MOF) assisted by KOH activation. The MDPC-X samples displayed high electric double-layer capacitance (EDLC) and pseudocapacitance owing to their oxygen-rich surfaces, abundant electroactive sites, and short ions/electron transfer lengths. The surface oxygen functional groups for the reversible chemical adsorption/desorption of Zn2+ are identified using ex situ X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Consequently, the as-assembled ZIHC exhibited a high capacity of 323.4 F g-1 (161.7 mA h g-1) at 0.5 A g-1 and a retention of 147 F g-1 (73.5 mA h g-1) at an ultrahigh current density of 50 A g-1, corresponding to high energy and power densities of 145.5 W h kg-1 and 45 kW kg-1, respectively. Furthermore, an excellent cycling life with 96.5% of capacity retention is also maintained after 10 000 cycles at 10 A g-1, demonstrating its promising potential for applications.

Flexible Linker-Based Triazine-Functionalized 2D Covalent Organic Frameworks for Supercapacitor and Gas Sorption Applications

Covalent organic frameworks (COFs) having a large surface area, porosity, and substantial amounts of heteroatom content are recognized as the ideal class of materials for energy storage and gas sorption applications. In this work, we have synthesized four different porous COF materials by the polycondensation of a heteroatom-rich flexible triazine-based trialdehyde linker, namely 2,4,6-tris(4-formylphenoxy)-1,3,5-triazine (TPT-CHO), with four different triamine linkers. Triamine linkers were chosen based on differences in size, symmetry, planarity, and heteroatom content, leading to the synthesis of four different COF materials named IITR-COF-1, IITR-COF-2, IITR-COF-3, and IITR-COF-4. IITR-COF-1, synthesized within 24 h from the most planar and largest amine monomer, exhibited the largest Brunauer-Emmett-Teller (BET) surface area of 2830 m2 g-1, superior crystallinity, and remarkable reproducibility compared to the other COFs. All of the synthesized COFs were explored for energy and gas storage applications. It is shown that the surface area and redox-active triazene rings in the materials have a profound effect on energy and gas storage enhancement. In a three-electrode setup, IITR-COF-1 achieved an electrochemical stability potential window (ESPW) of 2.0 V, demonstrating a high specific capacitance of 182.6 F g-1 with energy and power densities of 101.5 Wh kg-1 and 298.3 W kg-1, respectively, at a current density of 0.3 A g-1 in 0.5 M K2SO4 (aq) with long-term durability. The symmetric supercapacitor of IITR-COF-1//IITR-COF-1 exhibited a notable specific capacitance of 30.5 F g-1 and an energy density of 17.0 Wh kg-1 at a current density of 0.12 A g-1. At the same time, it demonstrated 111.3% retention of its initial specific capacitance after 10k charge-discharge cycles. Moreover, it exhibited exceptional CO2 capture capacity of 25.90 and 10.10 wt % at 273 and 298 K, respectively, with 2.1 wt % of H2 storage capacity at 77 K and 1 bar.

The Compatibility of COFs Cathode and Optimized Electrolyte for Ultra-Long Lifetime Rechargeable Aqueous Zinc-Ion Battery

Rechargeable aqueous zinc-ion batteries (RAZIBs) are attractive due to their affordability, safety, and eco-friendliness. However, their potential is limited by the lack of high-capacity cathodes and compatible electrolytes needed for reliable performance. Herein, we have presented a compatibility strategy for the development of a durable and long-lasting RAZIBs. The covalent organic frameworks (COFs) based on anthraquinone (DAAQ-COF) is created and utilized as the cathode, with zinc metal serving as the anode. The electrolyte is made up of an aqueous solution containing zinc salts at various concentrations. The COF cathode has been designed to be endowed with a rich array of redox-active groups, enhancing its electrochemical properties. Meanwhile, the electrolyte is formulated using triflate anions, which have exhibited superiority over sulfate anions. This strategy lead to the development of an optimized COF cathode with fast charging capability, high Coulombic efficiency (nearly 100 %) and long-term cyclability (retention rate of nearly 100 % at 1 A g-1 after 10000 cycles). Moreover, through experimental analysis, a co-insertion mechanism involving Zn2+ and H+ in this cathode is discovered for the first time. These findings represent a promising path for the advancement of organic cathode materials in high-performance and sustainable RAZIBs.

Dual-Salt Mixed Electrolyte for High Performance Aqueous Aluminum Batteries

A dual-salt electrolyte with 5 M Al(OTF)3 and 0.5 M LiOTF is proposed for aqueous aluminum batteries, which can effectively prevent the corrosion caused by the hydrogen evolution reaction. With the addition of LiOTF in the electrolyte, the solvation phenomenon has changed with the coordination mode of Al3+ conversion from an all octahedral structure to a mixed octahedral and tetrahedral structure. This change can reduce the hydrogen bond between water molecules, which will minimize the occurrence of hydrogen evolution reactions. Moreover, the new electrolyte improves the cycle life of the battery. With MnO as the cathode, 2.1 V high charging platform and 1.5 V high discharge platform can be obtained. The electrochemical stability window (ESW) has been improved to 3.8 V. The first cycle capacity is up to 437 mAh g-1, which can be maintained at 103 mAh g-1 after 100 cycles. This work provides solutions for the future development of electrolyte for aqueous aluminum batteries.

Water-Ion Interaction Determines the Mobility of Ions in Highly Concentrated Aqueous Electrolytes

Solvation engineering plays a critical role in tailoring the performance of batteries, particularly through the use of highly concentrated electrolytes, which offer heterogeneous solvation structures of mobile ions with distinct electrochemical properties. In this study, we employed spectroscopic techniques and molecular dynamics simulations to investigate mixed-cation (Li+/K+) acetate aqueous electrolytes. Our research unravels the pivotal role of water in facilitating ion transport within a highly viscous medium. Notably, Li+ cations primarily form ion aggregates, predominantly interacting with acetate anions, while K+ cations emerge as the principal charge carriers, which is attributed to their strong interaction with water molecules. Intriguingly, even at a concentration as high as 40 m, a substantial amount of water molecules persistently engages in hydrogen bonding with one another, creating mobile regions rich in K+ ions. Our observations of a redshift of the OH stretching band of water suggest that the strength of the hydrogen bond alone cannot account for the expansion of the electrochemical stability window. These findings offer valuable insights into the cation transfer mechanism, shedding light on the contribution of water-bound cations to both the ion conductivity and the electrochemical stability window of aqueous electrolytes for rechargeable batteries. Our comprehensive molecular-level understanding of the interplay between cations and water provides a foundation for future advances in solvation engineering, leading to the development of high-performance batteries with improved energy storage and safety profiles.

Effect of annealing temperature on structural and electrochemical behaviour on MgFe2O4as electrode material in neutral aqueous electrolyte for supercapacitors

Binary metal oxides possess unique structures and multiple oxidation states, making them highly valuable in electrochemical analysis. This study aims to determine the effect of annealing temperature on the electrochemical properties of magnesium ferrite when used as an electrode material in a neutral aqueous electrolyte. We utilized the sol-gel technique to synthesize the material and annealed it at various temperatures. Our analysis of the material using different characterization techniques reveals significant changes in its structural and electrochemical properties. We found that the material exhibited a range of phases, and higher annealing temperatures led to improved electrochemical properties. The electrochemical measurements showed reversible and redox pseudo-capacitance behavior, with the material annealed at 500 °C exhibiting the highest specific capacitance of 117 F g-1at a current density of 0.5 A g-1. Capacitive and diffusion-controlled processes govern the total charge storage mechanism, and their contribution changes significantly as the annealing temperature varies. The capacitance retention of 500 °C annealed sample was 58% and it remained stable. This work establishes a correlation between annealing temperature on structural, morphological, and electrochemical behavior, thereby opening up avenues for tailoring them effectively. These findings can be useful in the development of future electrode materials for electrochemical applications.

Ionic Competition between Na+ and H+ in Aqueous Sodium-Ion Battery Electrolytes

Aqueous electrolytes have become a research hotspot because of their high safety and low cost, while the inevitable ionization phenomenon of water in aqueous solution leads to the existence of competitive ions (H+) except the active ions. In this article, we take aqueous Na base electrolyte as an example to clear the ion competition behavior by modeling, simulating together with experimental verification. First, the reaction tendency of the two ions (Na+ and H+) is obtained by calculating the Gibbs energy change of the reaction. Furthermore, the properties of electrolytes with different concentrations including transportation are obtained by modeling. After that, relevant experiments are also proceeded to verify the simulation results. Then, the ion competition behavior is analyzed by in situ observation by controlling the constant concentration of Na+: the high concentration of Na+ can reduce the proportion of H+ and reduce the competitiveness of H+; a high concentration of Na+ causes the increased viscosity and reduces the ion diffusion. Based on this, the correlation between ion competitiveness and ion ratio is also confirmed by keeping the concentration of Na+ unchanged and adjusting the concentration of H+ (adjusting pH). The influence of the ion competition phenomenon (Na+ and H+) is the reaction characteristics of the substance itself and the ratio of ion concentration. Finally, the electrochemical performance is further verified in 3,4,9,10-perylene tetracarboxylic dianhydride (PTCDI) symmetric cells and in full-cells with vanadium phosphate sodium (NVP) as the cathode and PTCDI as the anode.

Gel Biopolymer Electrolytes Based on Saline Water and Seaweed to Support the Large-Scale Production of Sustainable Supercapacitors

Climate change and the demand for clean energy have challenged scientists worldwide to produce/store more energy to reduce carbon emissions. This work proposes a conductive gel biopolymer electrolyte to support the sustainable development of high-power aqueous supercapacitors. The gel uses saline water and seaweed as sustainable resources. Herein, a biopolymer agar-agar, extracted from red algae, is modified to increase gel viscosity up to 17-fold. This occurs due to alkaline treatment and an increase in the concentration of the agar-agar biopolymer, resulting in a strengthened gel with cohesive superfibres. The thermal degradation and agar modification mechanisms are explored. The electrolyte is applied to manufacture sustainable and flexible supercapacitors with satisfactory energy density (0.764 Wh kg-1 ) and power density (230 W kg-1 ). As an electrolyte, the aqueous gel promotes a long device cycle life (3500 cycles) for 1 A g-1 , showing good transport properties and low cost of acquisition and enabling the supercapacitor to be manufactured outside a glove box. These features decrease the cost of production and favor scale-up. To this end, this work provides eco-friendly electrolytes for the next generation of flexible energy storage devices.

Fused Functional Organic Material with the Alternating Conjugation of Quinone-Pyrazine as Cathode for Aqueous Zinc Ion Batteries

Organic cathode materials for aqueous rechargeable zinc batteries (ARZBs) are rapidly gaining prominence, while the exploration of compounds with affordable synthesis, satisfactory electrochemical performance, and understandable mechanisms still remains challenging. In this study, 6,8,15,17-tetraaza-heptacene-5,7,9,14,16,18-hexaone (TAHQ) as an easily synthesized organic cathode material with novel quinone/pyrazine alternately conjugated molecule structure is presented. This organic electrode exhibits good capacity with highly reversible redox reactions, and the influence of multi-active structures on the Zn2+ /H+ loading behavior is systematically investigated by ex situ spectroscopy, electrochemical tests, and computation. Both experimental and theoretical studies effectively address the Zn2+ /H+ intercalation/deintercalation kinetics. Benefitting from the fused active functionalities, the assembled Zn//TAHQ battery displays a maximum discharge specific capacity of 254.3 mAh g-1 at 0.5 A g-1 , and it maintains remarkable cycle performance with 71% capacity retention after 1000 cycles under 5 A g-1 .

"Soggy-Sand" Chemistry for High-Voltage Aqueous Zinc-Ion Batteries

The narrow electrochemical stability window, deleterious side reactions, and zinc dendrites prevent the use of aqueous zinc-ion batteries. Here, aqueous "soggy-sand" electrolytes (synergistic electrolyte-insulator dispersions) are developed for achieving high-voltage Zn-ion batteries. How these electrolytes bring a unique combination of benefits, synergizing the advantages of solid and liquid electrolytes is revealed. The oxide additions adsorb water molecules and trap anions, causing a network of space charge layers with increased Zn2+ transference number and reduced interfacial resistance. They beneficially modify the hydrogen bond network and solvation structures, thereby influencing the mechanical and electrochemical properties, and causing the Mn2+ in the solution to be oxidized. As a result, the best performing Al2 O3 -based "soggy-sand" electrolyte exhibits a long life of 2500 h in Zn||Zn cells. Furthermore, it increases the charging cut-off voltage for Zn/MnO2 cells to 2 V, achieving higher specific capacities. Even with amass loading of 10 mgMnO2 cm-2 , it yields a promising specific capacity of 189 mAh g-1 at 1 A g-1 after 500 cycles. The concept of "soggy-sand" chemistry provides a new approach to design powerful and universal electrolytes for aqueous batteries.

Optimization of an Artificial Solid Electrolyte Interphase Formed on an Aluminum Anode and Its Application in Rechargeable Aqueous Aluminum Batteries

Electrochemical cells that incorporate aluminum (Al) as the active material have become increasingly popular due to the advantages of high energy density, cost-effectiveness, and superior safety features. Despite the progress made by research groups in developing rechargeable Al//MxOy (M = Mn, V, etc.) cells using an aqueous Al trifluoromethanesulfonate-based electrolyte, the reactions occurring at the Al anode are still not fully understood. In this study, we explore the artificial solid electrolyte interphase (ASEI) on the Al anode by soaking it in AlCl3/urea ionic liquid. Surprisingly, our findings reveal that the ASEI actually promotes the corrosion of Al by providing chloride anions rather than facilitating the transport of Al3+ ions during charge/discharge cycles. Importantly, the ASEI significantly enhances the cycling stability and activity of Al cells. The primary reactions occurring at the Al anode during the charge/discharge cycle were determined to be irreversible oxidation and gas evolution. Furthermore, we demonstrate the successful realization of urea-treated Al (UTAl)//AlxMnO2 cells (discharge operating voltage of ∼1.45 V and specific capacity of 280 mAh/g), providing a platform to investigate the underlying mechanisms of these cells further. Overall, our work highlights the importance of ASEI in controlling the corrosion of Al in aqueous electrolytes, emphasizing the need for the further development of electrolytic materials that facilitate the transport of Al3+ ions in rechargeable Al batteries.

Decoupling Electrochromism and Energy Storage for Flexible Quasi-Solid-State Aqueous Electrochromic Batteries with High Energy Density

Currently, reported aqueous electrochromic batteries (ECBs) show only limited capacity with insufficient energy density and power density. Such a limitation is naturally imposed by the rationale that the cathode of ECBs stores charge by an ion intercalation/deintercalation mechanism, where the inherent inhibition of ion diffusion and structural collapse of cathode materials through repetitive charge/discharge cycles lead to low areal capacity and unsatisfactory electrochemical performance with short lifetime. Herein, we decouple the dual functions of electrochromism and energy storage in conventional cathodes of ECBs by introducing a polyaniline/triiodide composite cathode that is in situ formed by direct electrolysis of an iodide-based quasi-solid-state aqueous electrolyte during charging. When paired with a zinc metal anode, the composite cathode can synergistically utilize the electrochromic property of polyaniline, the high-efficiency energy storage of the Zn-I2 system, as well as the effective anchorage of polyiodide by polyaniline to suppress the shuttle effect of triiodide. By selecting 1-butyl-3-methylimidazolium ion (BMI+) as the cation, a liquid-solid cathode/quasi-solid-state electrolyte interface can be achieved to facilitate the interfacial charge transfer, rendering quasi-solid-state aqueous electrochromic batteries with a high areal capacity of 1363 μAh cm-2, energy density of 1650 μWh cm-2, and power density of 5186 μW cm-2.

Does Water-in-Salt Electrolyte Subdue Issues of Zn Batteries?

Zn-metal batteries (ZnBs) are safe and sustainable because of their operability in aqueous electrolytes, abundance of Zn, and recyclability. However, the thermodynamic instability of Zn metal in aqueous electrolytes is a major bottleneck for its commercialization. As such, Zn deposition (Zn2+ → Zn(s)) is continuously accompanied by the hydrogen evolution reaction (HER) (2H+ → H2 ) and dendritic growth that further accentuate the HER. Consequently, the local pH around the Zn electrode increases and promotes the formation of inactive and/or poorly conductive Zn passivation species (Zn + 2H2 O → Zn(OH)2 + H2 ) on the Zn. This aggravates the consumption of Zn and electrolyte and degrades the performance of ZnB. To propel HER beyond its thermodynamic potential (0 V vs standard hydrogen electrode (SHE) at pH 0), the concept of water-in-salt-electrolyte (WISE) has been employed in ZnBs. Since the publication of the first article on WISE for ZnB in 2016, this research area has progressed continuously. Here, an overview and discussion on this promising research direction for accelerating the maturity of ZnBs is provided. The review briefly describes the current issues with conventional aqueous electrolyte in ZnBs, including a historic overview and basic understanding of WISE. Furthermore, the application scenarios of WISE in ZnBs are detailed, with the description of various key mechanisms (e.g., side reactions, Zn electrodeposition, anions or cations intercalation in metal oxide or graphite, and ion transport at low temperature).

Proton and Redox Couple Synergized Strategy for Aqueous Low Voltage-Driven WO3 Electrochromic Devices

Aqueous electrolytes possess non-combustible and eco-friendly features compared to organic electrolytes, leading them to be more suitable for application in smart windows for daily use. However, limited by the narrow electrochemical window of water (1.23 V), its use in conventional electrochromic devices (ECDs) would result in irreversible performance loss, which arises from decomposition caused by high voltage. Here, we propose a synergistic scheme combining a redox couple-catalytic counter electrode (RC-CCE) strategy with protons as guest ions. With the help of the intelligent matching of the reaction potentials of the RC and amorphous WO₃ electrochromic electrodes and the highly active and fast kinetic features of protons, it successfully reduces the working voltage range of the device to 1.1 V. The assembled HClO₄-ECD can possess an overall modulation rate (350-1200 nm) of 0.43 and 0.94 at -0.1 and -0.7 V, respectively, and a modulation of 66.8% at 600 nm at -0.7 V. Moreover, compared with other guest ions, the proton-based ECD exhibits higher coloration efficiency, a broader color modulation capability, and better stability. In addition, the house model equipped with the proton-based ECD effectively blocks solar radiation, which provides a potential solution for the design of aqueous smart windows.

An Aqueous Electrolyte Gated Artificial Synapse with Synaptic Plasticity Selectively Mediated by Biomolecules

The emulation of functions and behaviors of biological synapses using electronic devices has inspired the development of artificial neural networks (ANNs) in biomedical interfaces. Despite the achievements, artificial synapses that can be selectively responsive to non-electroactive biomolecules and directly operate in biological environments are still lacking. Herein, we report an artificial synapse based on organic electrochemical transistors and investigate the selective modulation of its synaptic plasticity by glucose. The enzymatic reaction between glucose and glucose oxidase results in long-term modulation of the channel conductance, mimicking selective binding of biomolecules to their receptors and consequent long-term modulation of the synaptic weight. Moreover, the device shows enhanced synaptic behaviors in the blood serum at a higher glucose concentration, which suggests its potential application in vivo as artificial neurons. This work provides a step towards the fabrication of ANNs with synaptic plasticity selectively mediated by biomolecules for neuro-prosthetics and human-machine interfaces.

Ambiguous Role of Cations in the Long-Term Performance of Electrochemical Capacitors with Aqueous Electrolytes

A comprehensive comparison of electrochemical capacitors (ECs) with various aqueous alkali metal sulfate solutions (Li₂SO₄, Na₂SO₄, Rb₂SO₄, and Cs₂SO₄) is reported. The EC with a less conductive 1 mol L^-1 Li₂SO₄ solution demonstrates the best long-term performance (214 h floating test) compared to the EC with a highly conductive 1 mol L^-1 Cs₂SO₄ solution (200 h). Both the positive and negative EC electrodes are affected by extensive oxidation and hydrogen electrosorption, respectively, during the aging process, as proven by the S_BET fade. Interestingly, carbonate formation is observed as a minor cause of aging. Two strategies for optimizing sulfate-based ECs are proposed. In the first approach, Li₂SO₄ solutions with the pH adjusted to 3, 7, and 11 are investigated. The sulfate solution alkalization inhibits subsequent redox reactions, and as a result, EC performance is successfully enhanced. The second approach exploits so-called bication electrolytic solutions based on a mixture of Li₂SO₄ and Na₂SO₄ at an equal concentration. This concept allows the operational time to be significantly prolonged, up to 648 h (+200% compared to 1 mol L^-1 Li₂SO₄). Therefore, two successful pathways for improving sulfate-based ECs are demonstrated.

Polypyrrole-Coated Low-Crystallinity Iron Oxide Grown on Carbon Cloth Enabling Enhanced Electrochemical Supercapacitor Performance

It is highly attractive to design pseudocapacitive metal oxides as anodes for supercapacitors (SCs). However, as they have poor conductivity and lack active sites, they generally exhibit an unsatisfied capacitance under high current density. Herein, polypyrrole-coated low-crystallinity Fe₂O₃ supported on carbon cloth (D-Fe₂O₃@PPy/CC) was prepared by chemical reduction and electrodeposition methods. The low-crystallinity Fe₂O₃ nanorod achieved using a NaBH₄ treatment offered more active sites and enhanced the Faradaic reaction in surface or near-surface regions. The construction of a PPy layer gave more charge storage at the Fe₂O₃/PPy interface, favoring the limitation of the volume effect derived from Na⁺ transfer in the bulk phase. Consequently, D-Fe₂O₃@PPy/CC displayed enhanced capacitance and stability. In 1 M Na₂SO₄, it showed a specific capacitance of 615 mF cm^-2 (640 F g^-1) at 1 mA cm^-2 and still retained 79.3% of its initial capacitance at 10 mA cm^-2 after 5000 cycles. The design of low-crystallinity metal oxides and polymer nanocomposites is expected to be widely applicable for the development of state-of-the-art electrodes, thus opening new avenues for energy storage.

Aging-Responsive Phase Transition of VOOH to V10O24·nH2O vs Zn2+ Storage Performance as a Rechargeable Aqueous Zn-Ion Battery Cathode

Vanadium oxyhydroxide has been recently investigated as a starting material to synthesize different phases of vanadium oxides by electrochemical or thermal conversion and has been used as an aqueous zinc-ion battery (AZIB) cathode. However, the low-valent vanadium oxides have poor phase stability under ambient conditions. So far, there is no study on understanding the phase evolution of such low-valent vanadium oxides and their effect on the electrochemical performance toward hosting the Zn²⁺ ions. The primary goal of the work is to develop a high-performance AZIB cathode, and the highlight of the current work is the insight into the auto-oxidation-induced phase transition of VOOH to V₁₀O₂₄·nH₂O under ambient conditions and Zn²⁺ intercalation behavior thereon as an aqueous zinc-ion battery cathode. Herein, we demonstrate that hydrothermally synthesized VOOH undergoes a phase transition to V₁₀O₂₄·nH₂O during both the electrochemical cycling and aerial aging over 38-45 days. However, continued aging till 150 days at room temperature in an open atmosphere exhibited an increased interlayer water content in the V₁₀O₂₄·nH₂O, which was associated with a morphological change with different surface area/porosity characteristics and notably reduced charge transfer/diffusion resistance as an aqueous zinc-ion battery cathode. Although the fresh VOOH cathode had impressive specific capacity at rate performance, (326 mAh/g capacity at 0.1 A/g current and 104 mAh/g capacity at 4 A/g current) the cathode suffered from a continuous capacity decay. Interestingly, the aged VOOH electrodes showed gradually decreasing specific capacity with aging at low current and however followed the reverse order at high current. At a comparable specific power of ∼64-66 W/kg, the fresh VOOH and aged VOOH after 60, 120, and 150 days of aging showed the respective energy densities of 208.3, 281.2, 269.2, and 240.6 Wh/kg. Among all the VOOH materials, the 150 day-aged VOOH cathode exhibited the highest energy density at a power density beyond 1000 W/kg. Thanks to the improved kinetics, the 150 day-aged VOOH cathode delivered a considerable energy density of 39.7 Wh/kg with a high specific power of 4466 W/kg. Also, it showed excellent cycling performance with only 0.002% capacity loss per cycle over 20 300 cycles at 10 A/g.

A New CuSe-TiO2-GO Ternary Nanocomposite: Realizing a High Capacitance and Voltage for an Advanced Hybrid Supercapacitor

A high capacitance and widened voltage frames for an aqueous supercapacitor system are challenging to realize simultaneously in an aqueous medium. The severe water splitting seriously restricts the narrow voltage of the aqueous electrolyte beyond 2 V. To overcome this limitation, herein, we proposed the facile wet-chemical synthesis of a new CuSe-TiO₂-GO ternary nanocomposite for hybrid supercapacitors, thus boosting the specific energy up to some maximum extent. The capacitive charge storage mechanism of the CuSe-TiO₂-GO ternary nanocomposite electrode was tested in an aqueous solution with 3 M KOH as the electrolyte in a three-cell mode assembly. The voltammogram analysis manifests good reversibility and a remarkable capacitive response at various currents and sweep rates, with a durable rate capability. At the same time, the discharge/charge platforms realize the most significant capacitance and a capacity of 920 F/g (153 mAh/g), supported by the impedance analysis with minimal resistances, ensuring the supply of electrolyte ion diffusion to the active host electrode interface. The built 2 V CuSe-TiO₂-GO||AC-GO||KOH hybrid supercapacitor accomplished a significant capacitance of 175 F/g, high specific energy of 36 Wh/kg, superior specific power of 4781 W/kg, and extraordinary stability of 91.3% retention relative to the stable cycling performance. These merits pave a new way to build other ternary nanocomposites to achieve superior performance for energy storage devices.

Capacitive Behavior of Aqueous Electrical Double Layer Based on Dipole Dimer Water Model

The aim of the present paper is to investigate the possibility of using the dipole dimer as water model in describing the electrical double layer capacitor capacitance behaviors. Several points are confirmed. First, the use of the dipole dimer water model enables several experimental phenomena of aqueous electrical double layer capacitance to be achievable: suppress the differential capacitance values gravely overestimated by the hard sphere water model and continuum medium water model, respectively; reproduce the negative correlation effect between the differential capacitance and temperature, insensitivity of the differential capacitance to bulk electrolyte concentration, and camel-shaped capacitance-voltage curves; and more quantitatively describe the camel peak position of the capacitance-voltage curve and its dependence on the counter-ion size. Second, we fully illustrate that the electric dipole plays an irreplaceable role in reproducing the above experimentally confirmed capacitance behaviors and the previous hard sphere water model without considering the electric dipole is simply not competent. The novelty of the paper is that it shows the potential of the dipole dimer water model in helping reproduce experimentally verified aqueous electric double layer capacitance behaviors. One can expect to realize this potential by properly selecting parameters such as the dimer site size, neutral interaction, residual dielectric constant, etc.

H2 O Activity Adjustment by Hydrogen Bonding Enables High-Performance Zn-Organic Battery

The advantages of low cost and high safety of zinc (Zn) metal have attracted much attention on its application in batteries, but H₂ O-induced issues of hydrogen evolution reaction (HER), Zn corrosion, and Zn dendrites formation limit the application. Here, a strategy of adjusting H₂ O activity was provided by adding glycerol (GL) and acetonitrile (AN) into aqueous electrolyte to form hydrogen bonds between organic solvents and H₂ O, which alleviated the Zn corrosion. Furthermore, molecular dynamics (MD) simulation indicated that GL could exclude H₂ O from the Zn²⁺ solvation shell, thus preventing undesired HER and Zn dendrites formation. Therefore, the corresponding Zn//Zn symmetrical cell showed a ultralong lifespan (1300 h). Then, a Zn-organic battery with 3,7-dimorpholino-phenothiazin-5-ium iodide (FD28) cathode was fabricated by using such electrolyte. Interestingly, the reduced H₂ O activity also ensured the stable operation of organic cathode, and thus the full cell showed superior cycle stability for over 9000 cycles (≈1100 h), which is superior to previous reports. Moreover, such electrolyte owns novel properties of nonflammability, great weatherability, and low freezing point, thus boosting the practicality of the battery.

The Effects of Ultrasound Treatment of Graphite on the Reversibility of the (De)Intercalation of an Anion from Aqueous Electrolyte Solution

Low cycling stability is one of the most crucial issues in rechargeable batteries. Herein, we study the effects of a simple ultrasound treatment of graphite for the reversible (de)intercalation of a ClO₄^- anion from a 2.4 M Al(ClO₄)₃ aqueous solution. We demonstrate that the ultrasound-treated graphite offers the improved reversibility of the ClO₄^- anion (de)intercalation compared with the untreated samples. The ex situ and in situ Raman spectroelectrochemistry and X-ray diffraction analysis of the ultrasound-treated materials shows no change in the interlayer spacing, a mild increase in the stacking order, and a large increase in the amount of defects in the lattice accompanied by a decrease in the lateral crystallite size. The smaller flakes of the ultrasonicated natural graphite facilitate the improved reversibility of the ClO₄^- anion electrochemical (de)intercalation and a more stable electrochemical performance with a cycle life of over 300 cycles.

Hierarchically Porous Ferroelectric Layer with the Aligned Dipole Moment for a High-Performance Aqueous Zn Metal Battery

Rechargeable aqueous Zn metal batteries (AZMBs) are desirable because of the advantages of metallic Zn and aqueous media. However, AZMBs suffer from limited cyclability and low Coulombic efficiency, originating from uncontrolled dendrite growth and side reactions such as hydrogen gas evolution and corrosion. A hierarchically porous poly(vinylidene difluoride) (PVDF) protection layer with ferroelectric β-phases is formed on the Zn metal using a simple electrospinning method. This suppresses Zn metal failure modes such as side reactions and dendrite growth and supports rapid electrolyte accessibility. The synergetic effect of hierarchically porous structures and ferroelectricity not only facilitates a supporting matrix to form uniform nucleation sites for Zn deposition but also inhibits corrosion, allowing dendrite-free Zn deposition. This multifunctional PVDF film significantly improves the cyclability of Zn symmetric cells, allowing for up to 850 h of repeated plating/stripping cycles. Moreover, it exhibits an excellent cycle life of 1000 cycles under harsh conditions and high current densities of 4.0-10.0 mA cm^-2, which are 62-fold higher than those that the bare Zn electrode tolerates.

N,N-dimethylformamide tailors solvent effect to boost Zn anode reversibility in aqueous electrolyte

Rechargeable aqueous Zn batteries are considered as promising energy-storage devices because of their high capacity, environmental friendliness and low cost. However, the hydrogen evolution reaction and growth of dendritic Zn in common aqueous electrolytes severely restrict the application of Zn batteries. Here, we develop a simple strategy to suppress side reactions and boost the reversibility of the Zn electrode. By introducing 30% (volume fractions) N,N-dimethylformamide (DMF) to the 2 M Zn(CF₃SO₃)₂-H₂O electrolyte (ZHD30), the preferential hydrogen-bonding effect between DMF and H₂O effectively reduces the water activity and hinders deprotonation of the electrolyte. The ZHD30 electrolyte improves the Zn plating/stripping coulombic efficiency from ∼95.3% to ∼99.4% and enhances the cycles from 65 to 300. The Zn-polyaniline full battery employing the ZHD30 electrolyte can operate over a wide temperature range from -40°C to +25°C and deliver capacities of 161.6, 127.4 and 65.8 mAh g^-1 at 25, -20 and -40°C, respectively. This work provides insights into the role of tuning solvent effects in designing low-cost and effective aqueous electrolytes.

Ultrahigh Energy and Power Densities of d-MXene-Based Symmetric Supercapacitors

Here, rational design electrodes are fabricated by mixing MXene with an aqueous solution of chloroauric acid (HAuCl₄). In order to prevent MXene from self-restacking, the groups of -OH on the surface of Ti₃C₂T_x nanosheets underwent a one-step simultaneous self-reduction from AuCl₄-, generating spaces for rapid ion transit. Additionally, by using this procedure, MXene's surface oxidation can be decreased while preserving its physio-chemical properties. The interlayered MX/Au NPs that have been obtained are combined into a conducting network structure that offers more active electrochemical sites and improved mass transfer at the electrode-electrolyte interface, both of which promote quick electron transfer during electrochemical reactions and excellent structural durability. The Ti₃C₂T_x-AuNPs film thus demonstrated a rate performance that was preferable to that of pure Ti₃C₂T_x film. According to the results of the characterization, the AuNPs effectively adorn the MXene nanosheets. Due to the renowned pseudocapacitance charge storage mechanism, MXene-based electrode materials also work well as supercapacitors in sulfuric acid, which is why MXene AuNPs electrodes have been tested in 3 M and 1 M H₂SO₄. The symmetric supercapacitors made of MXene and AuNPs have shown exceptional specific capacitance of 696.67 Fg^-1 at 5 mVs^-1 in 3 M H₂SO₄ electrolyte, and they can sustain 90% of their original capacitance for 5000 cycles. The highest energy and power density of this device, which operates within a 1.2 V potential window, are 138.4 Wh kg^-1 and 2076 W kg^-1, respectively. These findings offer a productive method for creating high-performance metal oxide-based symmetric capacitors and a straightforward, workable approach for improving MXene-based electrode designs, which can be applied to other electro-chemical systems that are ion transport-restricted, such as metal ion batteries and catalysis.

Hydrophilic Crosslinked TEMPO-Methacrylate Copolymers - a Straight Forward Approach towards Aqueous Semi-Organic Batteries

Crosslinked hydrophilic poly(2,2,6,6-tetramethylpiperidinyl-N-oxyl-co-[2-(methacryloyloxy)-ethyl]trimethyl ammonium chloride) [poly(TEMPO-co-METAC)] polymers with different monomer ratios are synthesized and characterized regarding a utilization as electrode material in organic batteries. These polymers can be synthesized rapidly utilizing commercial starting materials and reveal an increased hydrophilicity compared to the state-of-the-art poly(2,2,6,6-tetramethylpiperidinyl-N-oxyl-4-methacrylate) (PTMA). By increasing the hydrophilicity of the polymer, a preparation of cathode composites is enabled, which can be used for aqueous semi-organic batteries. Detailed battery testing confirms that the additional METAC groups do not impair the battery behavior while enabling straight-forward zinc-TEMPO batteries.

Stabilizing Layered Structure in Aqueous Electrolyte via O2-Type Oxygen Stacking

Despite the high energy density of O3-type layered cathode materials, the short cycle life in aqueous electrolyte hinders their practical applications in aqueous lithium-ion batteries (ALIBs). In this work, it is demonstrated that the structural stability of layered LiCoO₂ in aqueous electrolyte can be remarkably improved by altering the oxygen stacking from O3 to O2. As compared to the O3-type LiCoO₂ , the O2-type LiCoO₂ exhibits significantly improved cycle performance in neutral aqueous electrolyte. It is found that the structural degradation caused by electrophilic attack of proton can be effectively mitigated in O2-type layered structure. With O2 stacking, CoO₆ octahedra in LiCoO₂ possess stronger CoO bonds while Co migration from Co layer to Li layer is strongly hampered, resulting in enhanced structural stability against proton attack and prolonged cycle life in aqueous electrolyte. The findings in this work reveal that regulating oxygen stacking sequence is an effective strategy to improve the structural stability of layered materials for ALIBs.

Highly Concentrated Salt Electrolyte for a Highly Stable Aqueous Dual-Ion Zinc Battery

A zinc metal anode for zinc-ion batteries is a promising alternative to solve safety and cost issues in lithium-ion batteries. The Zn metal is characterized by its high theoretical capacity (820 mAh g^-1), low redox potential (0.762 V vs SHE), low toxicity, high abundance on Earth, and high stability in water. Taking advantage of the stability of Zn in water, an aqueous Zn ion battery with low cost, high safety, and easy-to-handle features can be developed. To minimize water-related parasitic reactions, this work utilizes a highly concentrated salt electrolyte (HCE) with dual salts─1 m Zn(OTf)₂ + 20 m LiTFSI. MD simulations prove that Zn²⁺ is preferentially coordinated with O in the TFSI^- anion from HCE instead of O in H₂O. HCE has a broadened electrochemical stability window due to suppressed H₂ and O₂ evolution. Some advanced ex situ and in situ/in operando analysis techniques have been applied to evaluate the morphological structure and the composition of the in situ formed passivation layer. A dual-ion full Zn||LiMn₂O₄ cell employing HCE has an excellent capacity retention of 92% after 300 cycles with an average Coulombic efficiency of 99.62%. Meanwhile, the low concentration electrolyte (LCE) cell degrades rapidly and is short-circuited after 66 cycles with an average Coulombic efficiency of 96.91%. The battery's excellent cycling performance with HCE is attributed to the formation of a stable anion-derived solid-electrolyte interphase (SEI) layer. On the contrary, the high free water activity in LCE leads to a water-derived interfacial layer with unavoidable dendrite growth during cycling.

Simply Prepared Magnesium Vanadium Oxides as Cathode Materials for Rechargeable Aqueous Magnesium Ion Batteries

Vanadium-oxide-based materials exist with various vanadium oxidation states having rich chemistry and ability to form layered structures. These properties make them suitable for different applications, including energy conversion and storage. Magnesium vanadium oxide materials obtained using simple preparation route were studied as potential cathodes for rechargeable aqueous magnesium ion batteries. Structural characterization of the synthesized materials was performed using XRD and vibrational spectroscopy techniques (FTIR and Raman spectroscopy). Electrochemical behavior of the materials, observed by cyclic voltammetry, was further explained by BVS calculations. Sluggish Mg²⁺ ion kinetics in MgV₂O₆ was shown as a result of poor electronic and ionic wiring. Complex redox behavior of the studied materials is dependent on phase composition and metal ion inserted/deinserted into/from the material. Among the studied magnesium vanadium oxides, the multiphase oxide systems exhibited better Mg²⁺ insertion/deinsertion performances than the single-phase ones. Carbon addition was found to be an effective dual strategy for enhancing the charge storage behavior of MgV₂O₆.

Enhanced Contrast of WO3-Based Smart Windows by Continuous Li-Ion Insertion and Metal Electroplating

The electrochromic WO₃ smart window based on an aqueous electrolyte shows an excellent liquid/solid interface and thus can achieve a fast electrochromic response, while the aqueous electrolyte has a limited electrochemical window, which probably induces the H⁺ reduction and degrades the practical application. Here, we propose a strategy to modify the traditional Li⁺ acidic aqueous electrolyte by adding some selective inert metal ions, which not only improve the electrochromic performance but also avoid the possible production of hydrogen bubbles due to the broadened electrochemical window. Furthermore, reversible electroplating of inert metal ions will occur, leading to an enhanced optical transmission change of up to 77.5% at 500 nm and 70.4% at 700 nm. This combination of Li-ion insertion and metal electroplating in the ESW device makes it superior to all of the previous reports. The device also demonstrates high stability and high electrochromic efficiency after 1000 cycles. The current study not only emphasizes the rational design for aqueous electrolytes but also demonstrates a practical way to realize an excellent electrochromic window for practical applications.

Probing the Electrode-Electrolyte Interface of a Model K-Ion Battery Electrode─The Origin of Rate Capability Discrepancy between Aqueous and Non-Aqueous Electrolytes

Li-ion batteries are the electrochemical energy storage technology of choice of today's electrical vehicles and grid applications with a growing interest for Na-ion and K-ion systems based on either aqueous or non-aqueous electrolyte for power, cost, and sustainable reasons. The rate capability of alkali-metal-ion batteries is influenced by ion transport properties in the bulk of the electrolyte, as well as by diverse effects occurring at the vicinity of the electrode and electrolyte interface. Therefore, identification of the predominant factor affecting the rate capability of electrodes still remains a challenge and requires suitable experimental and computational methods. Herein, we investigate the mechanistic of the K⁺ insertion process in the Prussian blue phase, Fe4III[FeII(CN)6]3 in both aqueous and non-aqueous electrolytes, which reveals drastic differences. Through combined electrochemical characterizations, electrochemical-quartz-crystal-microbalance and ac-electrogravimetric analyses, we provide evidences that what matters the most for fast ion transport is the positioning of the partially solvated cations adsorbed at the material surface in aqueous as opposed to non-aqueous electrolytes. We rationalized such findings by molecular dynamics simulations that establish the K⁺ repartition profile within the electrochemical double layer. A similar trend was earlier reported by our group for the aqueous versus non-aqueous insertion of Li⁺ into LiFePO₄. Such a study unveils the critical but overlooked role of the electrode-electrolyte interface in ruling ion transport and insertion processes. Tailoring this interface structuring via the proper salt-solvent interaction is the key to enabling the best power performances in alkali-metal-ion batteries.

Superconcentrated NaFSA-KFSA Aqueous Electrolytes for 2 V-Class Dual-Ion Batteries

Superconcentrated aqueous electrolytes containing NaN(SO2F)2 and KN(SO2F)2 (for which sodium and potassium bis(fluorosulfonyl)amides (FSA), respectively, are abbreviated) have been developed for 2 V-class aqueous batteries. Based on the eutectic composition of the NaFSA-KFSA (56:44 mol/mol) binary system, the superconcentrated solutions of 35 mol kg-1 Na0.55K0.45FSA/H2O and 33 mol kg-1 Na0.45K0.55FSA/H2O are found to form at 25 °C. As both electrolytes demonstrate a wider potential window of ∼3.5 V compared to that of either saturated 20 mol kg-1 NaFSA or 31 mol kg-1 KFSA solution, we applied the 33 mol kg-1 Na0.45K0.55FSA/H2O to two different battery configurations, carbon-coated Na2Ti2(PO4)3∥K2Mn[Fe(CN)6] and carbon-coated Na3V2(PO4)3∥K2Mn[Fe(CN)6]. The former cell shows highly reversible charge/discharge curves with a mean discharge voltage of 1.4 V. Although the latter cell exhibits capacity degradation, it demonstrates 2 V-class operations. Analysis data of the two cells confirmed that Na+ ions were mainly inserted into the negative electrodes passivated by a Na-rich solid electrolyte interphase, and both Na+ and K+ ions were inserted into the positive electrode. Based upon the observation, we propose new sodium-/potassium-ion batteries using the superconcentrated NaFSA-KFSA aqueous electrolytes.

Oxygen Redox Versus Oxygen Evolution in Aqueous Electrolytes: Critical Influence of Transition Metals

Aqueous lithium-ion batteries are promising electrochemical energy storage devices owing to their sustainable nature, low cost, high level of safety, and environmental benignity. The recent development of a high-salt-concentration strategy for aqueous electrolytes, which significantly expands their electrochemical potential window, has created attractive opportunities to explore high-performance electrode materials for aqueous lithium-ion batteries. This study evaluates the compatibility of large-capacity oxygen-redox cathodes with hydrate-melt electrolytes. Using conventional oxygen-redox cathode materials (Li₂ RuO₃ , Li_1.2 Ni_0.13 Co_0.13 Mn_0.54 O₂ , and Li_1.2 Ni_0.2 Mn_0.6 O₂ ), it is determined that avoiding the use of transition metals with high catalytic activity for the oxygen evolution reaction is the key to ensuring the stable progress of the oxygen redox reaction in concentrated aqueous electrolytes.

A Graphite∥PTCDI Aqueous Dual-Ion Battery

A full cell chemistry of aqueous dual-ion battery (DIB) was reported, comprising the graphite cathode and 3,4,9,10-perylenetetracarboxylic diimide (PTCDI) as the anode. This DIB employed a mixture aqueous electrolyte: 5 m tributylmethylammonium (TBMA) chloride plus 5 m MgCl₂ , where [MgCl₃ ]^- and TBMA⁺ serve as the charge carriers for cathode and anode of the DIB, respectively. This novel full cell exhibited a specific capacity of around 41 mAh g^-1 based on the total active mass of both electrodes with an average operation voltage of 1.45 V and stable cycling for 400 cycles.

Realizing the Multi-electron Reaction in the Na3V2(PO4)3 Cathode via Reversible Insertion of Dihydrogen Phosphate Anions

Dual-ion battery (DIB) is an up-and-coming technology for the energy storage field. However, most of the current cathodes are still focused on the graphite hosts, which deliver a limited specific capacity. In this work, we demonstrated for the first time that H₂PO₄^- can be used as the charge carrier for Na₃V₂(PO₄)₃ under an aqueous electrolyte, which enabled the V³⁺/V⁴⁺ and V⁴⁺/V⁵⁺ multielectron reactions in the Na₃V₂(PO₄)₃ electrode. The fabricated aqueous DIB delivers a high average voltage of ∼0.75 V (vs Ag/AgCl) and a high capacity of 280.7 mA h g^-1. Moreover, the formed V⁵⁺-based novel cathode exhibits a capacity of 170.2 mA h g^-1 in an organic sodium-ion battery. This study may open a new direction for fabricating high-voltage electrodes through the design of DIBs.

The emerging aqueous ammonium-ion batteries

Aqueous ammonium‐ion (NH₄⁺) batteries (AAIB) are a recently emerging technology that utilize the abundant electrode resources and the fast diffusion kinetics of NH₄⁺ to deliver an excellent rate performance at a low cost. Although significant progress has been made on AAIBs, the technology is still limited by various challenges. In this Minireview, the most recent advances are comprehensively summarized and discussed, including cathode and anode materials as well as the electrolytes. Finally, a perspective on possible solutions for the current limitations of AAIBs is provided.

Electrode-Electrolyte Interactions in an Aqueous Aluminum-Carbon Rechargeable Battery System

Being environmentally friendly, safe and easy to handle, aqueous electrolytes are of particular interest for next-generation electrochemical energy storage devices. When coupled with an abundant, recyclable and low-cost electrode material such as aluminum, the promise of a green and economically sustainable battery system has extraordinary appeal. In this work, we study the interaction of an aqueous electrolyte with an aluminum plate anode and various graphitic cathodes. Upon establishing the boundary conditions for optimal electrolyte performance, we find that a mesoporous reduced graphene oxide powder constitutes a better cathode material option than graphite flakes.

High-Performant All-Organic Aqueous Sodium-Ion Batteries Enabled by PTCDA Electrodes and a Hybrid Na/Mg Electrolyte

Aqueous sodium-ion batteries (ASIBs) are aspiring candidates for low environmental impact energy storage, especially when using organic electrodes. In this respect, perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) is a promising anode active material, but it suffers from extensive dissolution in conventional aqueous electrolytes. As a remedy, we here present a novel aqueous electrolyte, which inhibits the PTCDA dissolution and enables their use as all-organic ASIB anodes with high capacity retention and Coulombic efficiencies. Furthermore, the electrolyte is based on two, hence "hybrid", inexpensive and non-fluorinated Na/Mg-salts, it displays favourable physico-chemical properties and an electrochemical stability window >3 V without resorting to the extreme salt concentrations of water-in-salt electrolytes. Altogether, this paves the way for ASIBs with both relatively high energy densities, inexpensive total cell chemistries, long-term sustainability, and improved safety.

Electropolymerized 1D Growth Coordination Polymer for Hybrid Electrochromic Aqueous Zinc Battery

Organic materials are always viewed as promising electrochromic (EC) materials due to their synthetic versatility, color tunability, ready processability, and derivability from sustainable feedstocks. Most organic materials, however, are prone to undesirable redox side reactions in the presence of oxygen and water. As such, redox-active organic layers are often used in tandem with organic electrolytes to preserve their electrochemical stability. With the growing interest in electronics that are environmentally sustainable and biologically safe, developing aqueous-compatible organic materials is gaining growing interest. Herein, a rationally designed iron terpyridyl coordination polymer (CP) is prepared by controlled electropolymerization for realization of aqueous compatible EC and energy storage applications. Detailed analysis is established, showing that the CP grows in a 1D fashion and exhibits a predominant capacitive behavior which is reflected from its rapid charge-transfer kinetics. Taking this as an advantage, an integrated hybrid electrochromic zinc battery device is demonstrated with high color contrast, fast response time, and good endurance.

Cyclic Ether-Water Hybrid Electrolyte-Guided Dendrite-Free Lamellar Zinc Deposition by Tuning the Solvation Structure for High-Performance Aqueous Zinc-Ion Batteries

The serious zinc dendrites and poor cyclability at high cathode loading owing to the strong solvation effect of traditional aqueous electrolytes are the main bottlenecks to the development of aqueous rechargeable zinc-ion batteries (ARZIBs). Here, we design an ether-water hybrid zinc-ion electrolyte with bifunctional roles of not only unplugging the dendrites bottleneck at the Zn anode but also extending the cycle life at high cathode loading. A cyclic ether (1,4-dioxane (DX)) is incorporated into traditional ZnSO₄-based electrolytes to finely tune the solvation sheath of Zn²⁺. DX is found to guide the deposition orientation of zinc along the (002) plane, leading to not a dendritic structure but distinctively dense lamellar deposition due to the stronger affinity of the cyclic DX molecules toward Zn(002) than that of water, which is proven by density functional theory calculations. The cycling lifespan of the Zn anode extends up to over 600 h at 5.0 mA cm^-2 and maintains extremely high Coulombic efficiency of 99.8%, thereby further enabling the Zn-MnO₂ full cells to stably cycle at an ultrahigh mass loading of 9.4 mg cm^-2, paving the way to their practical applications. This work also provides a novel electrolyte regulating solution for other aqueous multivalent metal-ion batteries.

Reducing Water Activity by Zeolite Molecular Sieve Membrane for Long-Life Rechargeable Zinc Battery

Aqueous electrolytes offer major advantages in safe battery operation, green economy, and low production cost for advanced battery technology. However, strong water activity in aqueous electrolytes provokes a hydrogen evolution reaction and parasitic passivation on electrodes, leaving poor ion-transport in the electrolyte/electrode interface. Herein, a zeolite molecular sieve-modified (zeolite-modified) aqueous electrolyte is proposed to reduce water activity and its side-reaction. First, Raman spectroscopy reveals a highly aggressive solvation configuration and significantly suppressed water activity toward single water molecule. Then less hydrogen evolution and anti-corrosion ability of zeolite-modified electrolyte by simulation and electrochemical characterizations are identified. Consequently, a zinc (Zn) anode involves less side-reaction, and develops into a compact deposition morphology, as proved by space-resolution characterizations. Moreover, zeolite-modified electrolyte favors cyclic life of symmetric Zn||Zn cells to 4765 h at 0.8 mA cm^-2 , zinc-VO₂ coin cell to 3000 cycles, and pouch cell to 100 cycles. Finally, the mature production technique and low-cost of zeolite molecular sieve would tremendously favor the future scale-up application in engineering aspect.

Aqueous Aluminum Cells: Mechanisms of Aluminum Anode Reactions and Role of the Artificial Solid Electrolyte Interphase

Electrochemical cells with aluminum (Al) as the active material offer the benefits of high energy density, low cost, and high safety. Although several research groups have assembled rechargeable Al//M_xO_y (M = Mn, V, etc) cells with 2 m aqueous Al trifluoromethanesulfonate as an electrolyte and demonstrated the importance of the artificial solid electrolyte interphase (ASEI) on the Al anode for realizing high rechargeable capacity, the reactions of the Al anode in such cells remain underexplored. Herein, we investigate the effects of the ASEI on the charge/discharge cycling stability and activity of Al cells with the abovementioned aqueous electrolyte and reveal that this interphase provides chloride anions to induce the corrosion of Al rather than to support the transportation of Al³⁺ ions during charge/discharge. Regardless of the ASEI presence/absence, the main reactions at the Al anode during charge/discharge cycling are identified as oxidation and gas evolution, which suggests that the reduction of Al in the employed electrolyte is irreversible. The simple introduction of chloride anions (e.g., 0.15 m NaCl) into the electrolyte is shown to allow the realization of an Al//MnO₂ cell with superior performance (discharge working voltage ≈ 1.5 V and specific capacity = 250 mA h/g). Thus, the present work unveils the mechanisms of reactions occurring at the Al anode of aqueous electrolyte Al cells to support their further development.

Eco-Friendly Dye-Sensitized Solar Cells Based on Water-Electrolytes and Chlorophyll

Organic solvents used for electrolytes of dye-sensitized solar cells (DSSCs) are generally not only toxic and explosive but also prone to leakage due to volatility and low surface tension. The representative dyes of DSSCs are ruthenium-complex molecules, which are expensive and require a complicated synthesis process. In this paper, the eco-friendly DSSCs were presented based on water-based electrolytes and a commercially available organic dye. The effect of aging time after the device fabrication and the electrolyte composition on the photovoltaic performance of the eco-friendly DSSCs were investigated. Plasma treatment of TiO₂ was adopted to improve the dye adsorption as well as the wettability of the water-based electrolytes on TiO₂. It turned out that the plasma treatment was an effective way of improving the photovoltaic performance of the eco-friendly DSSCs by increasing the efficiency by 3.4 times. For more eco-friendly DSSCs, the organic-synthetic dye was replaced by chlorophyll extracted from spinach. With the plasma treatment, the efficiency of the eco-friendly DSSCs based on water-electrolytes and chlorophyll was comparable to those of the previously reported chlorophyll-based DSSCs with non-aqueous electrolytes.

High-Energy Aqueous Sodium-Ion Batteries

Water-in-salt electrolytes (WISE) have largely widened the electrochemical stability window (ESW) of aqueous electrolytes by formation of passivating solid electrolyte interphase (SEI) on anode and also absorption of the hydrophobic anion-rich double layer on cathode. However, the cathodic limiting potential of WISE is still too high for most high-capacity anodes in aqueous sodium-ion batteries (ASIBs), and the cost of WISE is also too high for practical application. Herein, a low-cost 19 m (m: mol kg^-1 ) bi-salts WISE with a wide ESW of 2.8 V was designed, where the low-cost 17 m NaClO₄ extends the anodic limiting potential to 4.4 V, while the fluorine-containing salt (2 m NaOTF) extends the cathodic limiting potential to 1.6 V by forming the NaF-Na₂ O-NaOH SEI on anode. The 19 m NaClO₄ -NaOTF-H₂ O electrolyte enables a 1.75 V Na₃ V₂ (PO₄ )₃ ∥Na₃ V₂ (PO₄ )₃ full cell to deliver an appreciable energy density of 70 Wh kg^-1 at 1 C with a capacity retention of 87.5 % after 100 cycles.