Interrogating the Mechanistic Features of Ni(I)-Mediated Aryl Iodide Oxidative Addition Using Electroanalytical and Statistical Modeling Techniques

While the oxidative addition of Ni(I) to aryl iodides has been commonly proposed in catalytic methods, an in-depth mechanistic understanding of this fundamental process is still lacking. Herein, we describe a detailed mechanistic study of the oxidative addition process using electroanalytical and statistical modeling techniques. Electroanalytical techniques allowed rapid measurement of the oxidative addition rates for a diverse set of aryl iodide substrates and four classes of catalytically relevant complexes (Ni(MeBPy), Ni(MePhen), Ni(Terpy), and Ni(BPP)). With >200 experimental rate measurements, we were able to identify essential electronic and steric factors impacting the rate of oxidative addition through multivariate linear regression models. This has led to a classification of oxidative addition mechanisms, either through a three-center concerted or halogen-atom abstraction pathway based on the ligand type. A global heat map of predicted oxidative addition rates was created and shown applicable to a better understanding of the reaction outcome in a case study of a Ni-catalyzed coupling reaction.

Investigating the mechanism of Ni-mediated trifluoromethylthiolation of aryl halides using AgSCF3

The mechanism of the Ni-catalysed trifluoromethylthiolation of aryl chlorides using AgSCF₃ is studied herein. A variety of IPr Ni^II complexes were synthesized via oxidative addition of Ni⁰ to 2-(2-chloro)phenylpyridines. Their reactivity with AgSCF₃ was tested by performing stoichiometric experiments, cyclic voltammetry, and NMR spectroscopic studies. CuSCF₃ was shown to behave similarly to AgSCF₃, while reactions with NMe₄SCF₃ revealed a major stoichiometric side reaction that forms a nickel fluoride complex. NMR kinetic studies revealed there is little correlation between the electron-withdrawing/donating nature of the para substituents on either the phenyl or pyridyl groups with the formation of the corresponding products. Cyclic voltammetry (CV) indicated the feasibilty of Ni^I/Ni^III transitions, and an increased rate of formation of product was observed with increased solvent polarity. Evidence suggests that the mechanism proceeds via inner-sphere electron transfer (ET) from AgSCF₃ to Ni^II, ultimately leading to the formation of the trifluoromethylthiolated product.

Redox-Neutral Transformations of Carbon Dioxide Using Coordinatively Unsaturated Late Metal Silyl Amide Complexes

Two-coordinate silylamido complexes of nickel and copper rapidly react with CO₂ to selectively form a new cyanate ligand along with hexamethyldisiloxane byproducts. Mechanistic insight into these reactions was obtained from the synthesis of proposed intermediates, several silyl- and phenyl- substituted amido analogues, and their subsequent reactivity with CO₂. These studies suggest that a unique intramolecular double silyl transfer step facilitates CO₂ deoxygenation, which likely contributes to the rapid rates of reaction. The deoxygenation reactions create a platform for a synthetic cycle in which copper amido complexes convert CO₂ to organic silylcarbamates.

Oxalamide/Amide Ligands: Enhanced and Copper-Catalyzed C-N Cross-Coupling for Triarylamine Synthesis

Triarylamines are privileged core structures that are found in versatile optoelectronic materials. New methods are constantly being sought for their preparation. Herein, a new protocol for triarylamine synthesis is presented where a wide range of diarylamines couple smoothly with aryl bromides mediated by a copper oxalamide (or amide) catalytic system. Notably, a new non-C₂-symmetric 1-isoquinolinamide-based N,N-/N,O-bidentate ligand was introduced that could tolerate bulky diarylamines. Plenty of known optoelectronic functional molecules could be synthesized in good to excellent yields. The practicality of this C-N cross-coupling was illustrated by the gram-scale synthesis of a patented thermally activated delayed fluorescence emitter for organic light-emitting diodes.

Unmasking the constitution and bonding of the proposed lithium nickelate "Li3NiPh3(solv)3": revealing the hidden C6H4 ligand

More than four decades ago, a complex identified as the planar homoleptic lithium nickelate “Li₃NiPh₃(solv)₃” was reported by Taube and co-workers. This and subsequent reports involving this complex have lain dormant since; however, the absence of an X-ray diffraction structure leaves questions as to the nature of the Ni–PhLi bonding and the coordination geometry at Ni. By systematically evaluating the reactivity of Ni(COD)₂ with PhLi under different conditions, we have found that this classical molecule is instead a unique octanuclear complex, [{Li₃(solv)₂Ph₃Ni}₂(μ-η²:η²-C₆H₄)] (5). This is supported by X-ray crystallography and solution-state NMR studies. A theoretical bonding analysis from NBO, QTAIM, and ELI perspectives reveals extreme back-bonding to the bridging C₆H₄ ligand resulting in dimetallabicyclobutane character, the lack of a Ni–Ni bond, and pronounced σ-bonding between the phenyl carbanions and nickel, including a weak σ_C–Li → s_Ni interaction with the C–Li bond acting as a σ-donor. Employing PhNa led to the isolation of [Na₂(solv)₃Ph₂NiCOD]₂ (7) and [Na₂(solv)₃Ph₂(NaC₈H₁₁)Ni(COD)]₂ (8), which lack the benzyne-derived ligand. These findings provide new insights into the synthesis, structure, bonding and reactivity of heterobimetallic nickelates, whose prevalence in organonickel chemistry and catalysis is likely greater than previously believed.

We disclose the actual octanuclear nature of the major compound from reacting Ni(COD)₂ and PhLi, assigned for more than four decades as ‘Li₃NiPh₃(solv)₃’. We provide a thorough bonding analysis and discuss its potential implications in catalysis.

Mechanisms of the Nickel-Catalysed Hydrogenolysis and Cross-Coupling of Aryl Ethers

The Ni-catalysed hydrogenolysis and cross-coupling of aryl ethers has emerged as a powerful synthetic tool to transform inert phenol-derived electrophiles into functionalised aromatic molecules. This has attracted significant interest due to its potential to convert the lignin fraction of biomass into chemical feedstocks, or to enable orthogonal reactivity and late-stage synthetic modification. Although the scope of nucleophiles employed, and hence the C–C and C–heteroatom bonds that can be forged, has expanded significantly since Wenkert’s seminal work in 1979, mechanistic understanding on how these reactions operate is still uncertain since the comparatively inert Caryl–O bond of aryl ethers challenge the involvement of classical mechanisms involving direct oxidative addition to Ni(0). In this review, we document the different mechanisms that have been proposed in the Ni-catalysed hydrogenolysis and cross-coupling of aryl ethers. These include: (i) direct oxidative addition; (ii) Lewis acid assisted C–O bond cleavage; (iii) anionic nickelates, and; (iv) Ni(I) intermediates. Experimental and theoretical investigations by numerous research groups have generated a pool of knowledge that will undoubtedly facilitate future discoveries in the development of novel Ni-catalysed transformations of aryl ethers.

1 Introduction

2 Direct Oxidative Addition

3 Hydrogenolysis of Aryl Ethers

4 Lewis Acid Assisted C–O Bond Cleavage

5 Anionic Nickelates

6 Ni(I) Intermediates

7 The ‘Naphthalene Problem’

8 Conclusions and Outlook

Oxidative Addition of Aryl Halides to a Ni(I)-Bipyridine Complex

The oxidative addition of aryl halides to bipyridine- or phenanthroline-ligated nickel(I) is a commonly proposed step in nickel catalysis. However, there is a scarcity of complexes of this type that both are well-defined and undergo oxidative addition with aryl halides, hampering organometallic studies of this process. We report the synthesis of a well-defined Ni(I) complex, [(^CO2Etbpy)Ni^ICl]₄ (1). Its solution-phase speciation is characterized by a significant population of monomer and a redox equilibrium that can be perturbed by π-acceptors and σ-donors. 1 reacts readily with aryl bromides, and mechanistic studies are consistent with a pathway proceeding through an initial Ni(I) → Ni(III) oxidative addition to form a Ni(III) aryl species. Such a process was demonstrated stoichiometrically for the first time, affording a structurally characterized Ni(III) aryl complex.

Nickel-Catalyzed NO Group Transfer Coupled with NOx Conversion

Nitrogen oxide (NO_x) conversion is an important process for balancing the global nitrogen cycle. Distinct from the biological NO_x transformation, we have devised a synthetic approach to this issue by utilizing a bifunctional metal catalyst for producing value-added products from NO_x. Here, we present a novel catalysis based on a Ni pincer system, effectively converting Ni-NO_x to Ni-NO via deoxygenation with CO(g). This is followed by transfer of the in situ generated nitroso group to organic substrates, which favorably occurs at the flattened Ni(I)-NO site via its nucleophilic reaction. Successful catalytic production of oximes from benzyl halides using NaNO₂ is presented with a turnover number of >200 under mild conditions. In a key step of the catalysis, a nickel(I)-^•NO species effectively activates alkyl halides, which is carefully evaluated by both experimental and theoretical methods. Our nickel catalyst effectively fulfills a dual purpose, namely, deoxygenating NO_x anions and catalyzing C-N coupling.

Deciphering the mechanism of the Ni-photocatalyzed C‒O cross-coupling reaction using a tridentate pyridinophane ligand

Photoredox nickel catalysis has emerged as a powerful strategy for cross-coupling reactions. Although the involvement of paramagnetic Ni(I)/Ni(III) species as active intermediates in the catalytic cycle has been proposed, a thorough spectroscopic investigation of these species is lacking. Herein, we report the tridentate pyridinophane ligands ^RN3 that allow for detailed mechanistic studies of the photocatalytic C–O coupling reaction. The derived (^RN3)Ni complexes are active catalysts under mild conditions and without an additional photocatalyst. We also provide direct evidence for the key steps involving paramagnetic Ni species in the proposed catalytic cycle: the oxidative addition of an aryl halide to a Ni(I) species, the ligand exchange/transmetalation at a Ni(III) center, and the C–O reductive elimination from a Ni(III) species. Overall, the present work suggests the ^RN3 ligands are a practical platform for mechanistic studies of Ni-catalyzed reactions and for the development of new catalytic applications.

Mechanistic knowledge of photocatalytic nickel reactions is lacking, particularly with regards to the identities and oxidation states of key intermediates. Here the authors report a class of tridentate ligands that enables in-depth study of a representative cross-coupling reaction, wherein evidence for multiple intermediates in a Ni(I/III) cycle is presented.

Well-Defined NHC-Ni Complexes as Catalysts: Preparation, Structures and Mechanistic Studies in Cross-Coupling Reactions

Developmental studies are ongoing to discover a way to utilise new N-heterocyclic carbene (NHC)-Ni complexes as catalysts. Using a bulky NHC ligand, it is possible to synthesise an NHC/phosphine-mixed heteroleptic Ni(II) complex, which can serve as an excellent catalyst for various cross-coupling reactions. During the study of the reaction mechanisms using these Ni complexes, NHC-Ni(I) complexes were accidentally discovered, and it was observed that they exhibit excellent catalytic activity for cross-coupling reactions. The possibility of the presence of NHC-Ni(I) intermediates in these catalytic reaction pathways has been experimentally demonstrated. Depending on the type of reaction, dinuclear Ni(I) and mononuclear Ni(I) complexes can function as intermediates. The results of the investigation of each reaction mechanism are summarised, and the prospects are described.

One to Find Them All: A General Route to Ni(I)-Phenolate Species

The past 20 years have seen an extensive implementation of nickel in homogeneous catalysis through the development of unique reactivity not easily achievable by using noble transition metals. Many catalytic cycles propose Ni(I) complexes as potential reactive intermediates, yet the scarcity of nickel(I) precursors and the lack of a general, non-ligand-specific protocol for their synthesis have hampered progress in this field of research. This has in turn also limited the access to novel, well-defined Ni(I) species for the development of new catalytic reactions. Herein, we report a simple, general route to access a wide variety of Ni(I)-phenolate complexes via an unusual example of an olefinic Ni(I) complex, [Ni(COD)(OPh*)] (COD = 1,5-cyclooctadiene, OPh* = O(^tBu)₃C₆H₂). This route has proven to be highly efficient for several coordination numbers and ligand classes enabling access to the following complexes: [Ni(IPr)(OPh*)] (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), [Ni(dcype)(OPh*)] (dcype = 1,2-bis(dicyclohexylphosphino)ethane), [Ni(dppe)(OPh*)] (dppe = 1,2-bis(diphenylphosphino)ethane), and [Ni(terpy)(OPh*)] (terpy = 2,2':6',2″-terpyridine). Moreover, reacting [Ni(dcype)(OPh*)] with trimethylsilyl triflate has led to the isolation of a unique example of a cationic binuclear Ni(I)-arene complex. All these complexes have been characterized by single-crystal X-ray, DFT, and EPR analyses, thus providing crucial experimental and theoretical information about their coordination environment and confirming a d⁹ electronic structure for all complexes involved. Overall, this new synthetic approach offers exciting opportunities for the discovery of new stoichiometric and catalytic reactivity as well as the mechanistic elucidation of Ni-based catalytic cycles.

Reactions of nickel(0) with organochlorides, organobromides, and organoiodides: mechanisms and structure/reactivity relationships

The reactions of nickel(0) complexes with phosphine, bipyridine-type, and N-heterocyclic carbene ligands with aryl, vinyl, and alkyl halides is reviewed.

Selective nickel-catalyzed fluoroalkylations of olefins

Mild and selective nickel-catalyzed trifluoromethylation and perfluoroalkylation reactions of alkenes were developed to provide fluorinated olefins, including natural products, pharmaceuticals, and variety of synthetic building blocks in good to excellent yields (38 examples). Control experiments, kinetic measurements and in situ EPR studies reveal the importance of radical species and the formation of 1,2-adducts as intermediates.

Novel Photoinitiators Based on Benzophenone-Triphenylamine Hybrid Structure for LED Photopolymerization

In this study, a new generation of photoinitiator (PI) based on hybrid structures combining benzophenone and triphenylamine is proposed. Remarkably, these photoinitiators (noted monofunctional benzophenone-triphenylamine (MBP-TPA) and trifunctional benzophenone-triphenylamine (TBP-TPA)) are designed and developed for the photopolymerization under light-emitting diodes (LEDs). Benzoyl substituents connected with triphenylamine moiety contribute to the excellent absorption properties which results in both high final conversions and polymerization rates in free radical photopolymerization (FRP). Remarkably, TBP-TPA owning trifunctional benzophenone group exhibits a better Type II PI behavior than well-known 2-isopropylthioxanthone for photopolymerization under LED@365 and 405 nm irradiation. FRP and cationic photopolymerization of TBP-TPA-based systems are applied on 3D printing experiments, and good profiles of the 3D patterns are observed. The high molecular weight of TBP-TPA associated with it trifunctional character can also be very interesting for a better migration stability of PIs that is a huge challenge. The development of this new generation of photoinitiators based on benzophenone hybrid structures is a real breakthrough. It reveals that the novel versatile photoinitiators based on benzophenone-triphenylamine hybrid structures have great potentials for future industrial applications (e.g., 3D printing, composites, etc.).

Nickel-Catalyzed Intramolecular Desulfitative C-N Coupling: A Synthesis of Aromatic Amines

A nickel-catalyzed intramolecular C-N coupling reaction via SO₂ extrusion is presented. The use of a catalytic amount of BPh₃ allows the transformation to take place under much milder conditions (60 °C) than previously reported C-N coupling reactions by CO or CO₂ extrusion (160-180 °C). In addition, this method displays good functional group tolerance and versatility, as it can be applied to the synthesis of dialkyl aryl amines, alkyl diaryl amines, and triaryl amines. The robustness of the desulfitative C-N coupling is demonstrated by three high-yielding gram-scale reactions.

Aldehydes and ketones influence reactivity and selectivity in nickel-catalysed Suzuki-Miyaura reactions

The energetically-favorable coordination of aldehydes and ketones - but not esters or amides - to Ni⁰ during Suzuki-Miyaura reactions can lead either to exquisite selectivity and enhanced reactivity, or to inhibition of the reaction. Aryl halides where the C-X bond is connected to the same π-system as an aldehyde or ketone undergo unexpectedly rapid oxidative addition to [Ni(COD)(dppf)] (1), and are selectively cross-coupled during competition reactions. When aldehydes and ketones are present in the form of exogenous additives, the cross-coupling reaction is inhibited to an extent that depends on the strength of the coordination of the pendant carbonyl group to Ni⁰. This work advances our understanding of how common functional groups interact with Ni⁰ catalysts and how these interactions affect workhorse catalytic reactions in academia and industry.

Sterically enriched bulky 1,3-bis(N,N′-aralkyl)benzimidazolium based Pd-PEPPSI complexes for Buchwald–Hartwig amination reactions

A simple and efficient synthesis of a series of unexisting Pd-PEPPSI complexes is summarized. These complexes are exploited for their high catalytic activity towards Buchwald–Hartwig amination.

Nickel-Catalyzed Inter- and Intramolecular Aryl Thioether Metathesis by Reversible Arylation

A nickel‐catalyzed aryl thioether metathesis has been developed to access high‐value thioethers. 1,2‐Bis(dicyclohexylphosphino)ethane (dcype) is essential to promote this highly functional‐group‐tolerant reaction. Furthermore, synthetically challenging macrocycles could be obtained in good yield in an unusual example of ring‐closing metathesis that does not involve alkene bonds. In‐depth organometallic studies support a reversible Ni⁰/Ni^II pathway to product formation. Overall, this work not only provides a more sustainable alternative to previous catalytic systems based on Pd, but also presents new applications and mechanistic information that are highly relevant to the further development and application of unusual single‐bond metathesis reactions.

Fluorine-Substituted Arylphosphine for an NHC-Ni(I) System, Air-Stable in a Solid State but Catalytically Active in Solution

Monovalent NHC-nickel complexes bearing triarylphosphine, in which fluorine is incorporated onto the aryl groups, have been synthesized. Tris(3,5-di(trifluoromethyl)-phenyl)phosphine efficiently gave a monovalent nickel bromide complex, whose structure was determined by X-ray diffraction analysis for the first time. In the solid state, the Ni(I) complex was less susceptible to oxidation in air than the triphenylphosphine complex, indicating greatly improved solid-state stability. In contrast, the Ni(I) complex in solution can easily liberate the phosphine, high catalytic activity toward the Kumada–Tamao–Corriu coupling of aryl bromides.

Bulky-Yet-Flexible Carbene Ligands and Their Use in Palladium Cross-Coupling

In recent years, several classes of new N-heterocyclic carbene (NHC) ligands were developed around the concept of “flexible steric bulk”. The steric hindrance of these ligands brings stability to the active species, while ligand flexibility still allows for the approach of the substrate. In this review, the synthesis of several types of new classes, such as IBiox, cyclic alkyl amino carbenes (CAAC), ITent, and IPr* are discussed, as well as how they move the state-of-the-art in palladium catalyzed cross-coupling forward.

Low-coordinate first-row transition metal complexes in catalysis and small molecule activation

In this Perspective, we will highlight selected examples of transition metal complexes with low coordination numbers whose high reactivity has been exploited in catalysis and the activation of small molecules featuring strong bonds (N₂, CO₂, and CO).