Photocatalytic degradation of methylene blue by TiO2/Nd2O3 composite thin films

To improve the photocatalytic property of TiO2 thin films, the composite thin films of TiO2/Nd2O3 structure were fabricated by electron-beam physical vapor deposition method, and the photocatalytic property of the fabricated films was experimentally studied in the present work. The XRD and Raman analyses show that the TiO2/Nd2O3 films are mainly hexagonal crystalline phase of Nd2O3. The XPS analysis for the chemical state changes of Ti, O and Nd of the basic elements in the films is confirming the electron flow in the internal electric field which generated in the TiO2/Nd2O3 films. The surface morphology shows the lattice distortion which affects the changes in the energy band structure. Moreover, the formation of n-n homojunctions improved the separation efficiency of electrons and holes, and enhanced the catalytic activity. The photocatalytic performance for the methylene blue target dye shows that the sample with TiO2 thickness of 20-25 nm has better performance, high degradation efficiency and high reaction rate.

Recent developments, advances and strategies in heterogeneous photocatalysts for water splitting

Photocatalytic water splitting (PWS) is an up-and-coming technology for generating sustainable fuel using light energy. Significant progress has been made in the developing of PWS innovations over recent years. In addition to various water-splitting (WS) systems, the focus has primarily been on one- and two-steps-excitation WS systems. These systems utilize singular or composite photocatalysts for WS, which is a simple, feasible, and cost-effective method for efficiently converting prevalent green energy into sustainable H2 energy on a large commercial scale. The proposed principle of charge confinement and transformation should be implemented dynamically by conjugating and stimulating the photocatalytic process while ensuring no unintentional connection at the interface. This study focuses on overall water splitting (OWS) using one/two-steps excitation and various techniques. It also discusses the current advancements in the development of new light-absorbing materials and provides perspectives and approaches for isolating photoinduced charges. This article explores multiple aspects of advancement, encompassing both chemical and physical changes, environmental factors, different photocatalyst types, and distinct parameters affecting PWS. Significant factors for achieving an efficient photocatalytic process under detrimental conditions, (e.g., strong light absorption, and synthesis of structures with a nanometer scale. Future research will focus on developing novel materials, investigating potential synthesis techniques, and improving existing high-energy raw materials. The endeavors aim is to enhance the efficiency of energy conversion, the absorption of radiation, and the coherence of physiochemical processes.

A Comprehensive Review on the Boosted Effects of Anion Vacancy in the Heterogeneous Photocatalytic Degradation, Part II: Focus on Oxygen Vacancy

Environmental problems, including the increasingly polluted water and the energy crisis, have led to a need to propose novel strategies/methodologies to contribute to sustainable progress and enhance human well-being. For these goals, heterogeneous semiconducting-based photocatalysis is introduced as a green, eco-friendly, cost-effective, and effective strategy. The introduction of anion vacancies in semiconductors has been well-known as an effective strategy for considerably enhancing the photocatalytic activity of such photocatalytic systems, giving them the advantages of promoting light harvesting, facilitating photogenerated electron-hole pair separation, optimizing the electronic structure, and enhancing the yield of reactive radicals. This Review will introduce the effects of anion vacancy-dominated photodegradation systems. Then, their mechanism will illustrate how an anion vacancy changes the photodegradation pathway to enhance the degradation efficiency toward pollutants and the overall photocatalytic performance. Specifically, the vacancy defect types and the methods of tailoring vacancies will be briefly illustrated, and this part of the Review will focus on the oxygen vacancy (OV) and its recent advances. The challenges and development issues for engineered vacancy defects in photocatalysts will also be discussed for practical applications and to provide a promising research direction. Finally, some prospects for this emerging field will be proposed and suggested. All permission numbers for adopted figures from the literature are summarized in a separate file for the Editor.

In situ fabrication of lanthanum-doped nickel oxide nanostructures using sol-gel for the degradation of rhodamine B

Nanoscale science represents a thriving field of research for environmental applications within materials science. This study focuses on the fabrication of pure and La-doped nickel oxide (NiO) nanostructures with varying concentrations (1.0, 2.0, 3.0, and 4.0 wt%) of lanthanum using a facile sol-gel technique. This study explores the structural, morphological, chemical composition, and optical characteristics of the resulting pure and La-doped NiO nanostructures. Techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, UV-visible spectroscopy, and photoluminescence (PL) spectroscopy were used for material analysis. The observed trend in the energy band gap (Eg) values demonstrates a continuous decrease up to a La-doping concentration of 3 wt% in NiO. However, after this concentration (at 4.0 wt%), there is a noticeable increase in the energy band gap. At lower La-doping concentrations (up to 3 wt%), the incorporation of La ions into the NiO lattice may result in the formation of defects and oxygen vacancies. The presence of these imperfections may lead to new energy levels into the band gap, resulting in partial filling and a subsequent reduction in the band gap. Beyond a specific doping concentration (e.g., 3 wt%), excess La atoms may aggregate or cluster inside the NiO lattice. This agglomeration may cause structural distortions, strain, and disturbances in the crystal lattice, resulting in an increase in the band gap. The 3 wt% La-doped NiO sample demonstrated a notable 84% degradation efficiency of the synthesized nanomaterials coupled with its inherent stability, highlighting its dual attributes of effective pollutant removal and sustained performance. Furthermore, the cyclic stability of the optimized nanostructure is anticipated to be ∼77.42% after six cycles, suggesting promising future applications in photocatalysis.

Strategies to improve adsorption and photocatalytic performance of metal-organic frameworks (MOFs) for perfluoroalkyl and polyfluoroalkyl substances (PFASs) removal from water: A review

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) represent a category of persistent and hazardous organic pollutants extensively prevalent across aquatic environments. The combination of adsorption and photocatalytic degradation has been identified as an effective approach for removing trace amounts of PFASs from water. Among the various materials explored for this purpose, metal-organic frameworks (MOFs) have structural solid tunability, and suitable modification methods could endow them with rich adsorption capabilities and excellent photocatalytic performance, which has potential for applications involving the treatment of trace, multi-chain-length PFASs in water. The research within this realm is currently in its nascent phase, and a holistic knowledge of modification methods can provide a comprehensive framework for future studies. Therefore, this review intends to (1) summarize the mechanism underlying the adsorption and photocatalytic removal of PFASs by MOFs; (2) present various modification methods aimed at enhancing the adsorption and photocatalytic performance of MOFs in alignment with the goal mentioned above; (3) provide an outlook on the prospects of utilizing MOFs for PFASs removal based on current trends and data. Ultimately, the findings from these studies will contribute to advancing knowledge in this area and facilitate the development of effective strategies for addressing PFASs contamination in water systems.

Modification engineering of TiO2-based nanoheterojunction photocatalysts

Titanium dioxide (TiO2)-based photocatalysts have gained increasing attention for their versatile applications in organic degradation, hydrogen production, air purification, and CO2 reduction. Various TiO2-based heterojunction structures, including type I, type II, Schottky junction, Z-scheme, and S-scheme, have been extensively studied. The current research frontier is centered on the engineering modifications of TiO2-based nanoheterojunction photocatalysts, such as defect engineering, morphological engineering, crystal phase/facet engineering, and multijunction engineering. These modifications enhance carrier transport, separation, and light absorption, thereby improving the photocatalytic performance. Remarkably, this aspect has been less addressed in existing reviews. This review aims to fill this gap by focusing on the engineering modifications of TiO2-based nanoheterojunction photocatalysts. We delve into specific topics like oxygen vacancies, n-p homojunctions, and double defects. The review also systematically discusses the applications of multidimensional heterojunctions and examines carrier transport pathways in heterophase/facet junctions and their interactions with heterojunctions. A comprehensive summary of multijunction systems, including multi-Schottky junctions, semiconductor-based heterojunction-attached Schottky junctions, and multisemiconductor-based heterojunctions, is presented. Lastly, we outline future perspectives in this promising research field. This paper will assist researchers in constructing more efficient TiO2-based nanoheterojunction photocatalysts.

Electrospinning Photocatalysis Meet In Situ Irradiated XPS: Recent Mechanisms Advances and Challenges

Producing solar fuels over photocatalysts under light irradiation is a considerable way to alleviate energy crises and environmental pollution. To develop the yields of solar fuels, photocatalysts with broad light absorption, fast charge carrier migration, and abundant reaction sites need to be designed. Electrospun 1D nanofibers with large specific areas and high porosity have been widely used in the efficient production of solar fuels. Nevertheless, it is challenging to do in-depth mechanism research on electrospun nanofiber-based photocatalysts since there are multiple charge transfer routes and various reaction sites in these systems. Here, the basic principles of electrospinning and photocatalysis are systemically discussed. Then, the different roles of electrospun nanofibers played in recent research to boost photocatalytic efficiency are highlighted. It is noteworthy that the working principles and main advantages of in situ irradiated photoelectron spectroscopy (ISI-XPS), a new technique to investigate migration routes of charge carriers and identify active sites in electrospun nanofibers based photocatalysts, are summarized for the first time. At last, a brief summary on the future orientation of photocatalysts based on electrospun nanofibers as well as the perspectives on the development of the ISI-XPS technique are also provided.

Photocatalytic Gold Recovery from Industrial Gold Plating Effluent by ZnO Nanoparticles: Optimum Condition and Possible Applications

The comparative study of photocatalytic gold recovery from cyanide-based gold plating solution was explored via commercial and hydrothermally synthesized ZnO nanoparticles (NPs). The effects of hydrothermal temperatures on the properties and photocatalytic activities of synthesized ZnO NPs were investigated. In addition, the effects of operating parameters including types of hole scavenger, concentrations of the best hole scavenger, the initial pH of wastewater, and photocatalyst dosages were examined. The obtained results demonstrated that the commercial ZnO NPs exhibited a higher photocatalytic activity for gold recovery than that of the synthesized ones owing to their good crystal quality and the presence of non-lattice zinc ions and appropriate non-lattice oxygen ions. Via the commercial ZnO NPs, the gold ions were almost completely recovered from the cyanide-based gold plating effluent within 7 h at an initial pH of 11.0 in the presence of 10 vol % C2H5OH and 1.0 g/L of photocatalyst loading with a pseudo-first-order rate constant of 0.2637 h-1. Finally, the resultant gold-decorated ZnO NPs exhibited a higher photocatalytic property for color reduction from industrial wastewater and antibacterial activity than that of fresh ZnO NPs. The results obtained in this study possess benefits and pave the way for waste remediation and management for the plating industries.

Critical review on modified floating photocatalysts for emerging contaminants removal from landscape water: problems, methods and mechanism

Due to the disorderly discharge in modern production and daily life of people, emerging contaminants(ECs) began to appear in landscape water, and have become a key public concern. Because of the unique characteristics of landscape water, it is difficult to efficiently remove ECs either by natural purification or by traditional large-scale sewage treatment facilities. The ideal purification method is to remove them while maintaining a beautiful environment. Possessing the feature of low-density, floating photocatalysts could harvest sufficient light on the surface of the water for photocatalytic degradation, which may be an important supplement for ECs treatment in landscape water. This paper gave a review related to floating photocatalysts and proposed an idea of combining floating photocatalysts to construct bionic photocatalytic materials for contaminative landscape water treatment. Six types of common floating substrates and corresponding applications for floating photocatalysts were concluded in this paper, and the main problem leading to the low efficiency of photocatalysts and three corresponding three improvement strategies were discussed. Besides, the modification mechanisms of photocatalysts were discussed thoroughly. On this basis, the engineering application prospects of bionic photocatalytic materials were proposed to remove ECs in landscape water.

Advanced Photocatalytic Uranium Extraction Strategies: Progress, Challenges, and Prospects

Nuclear energy with low carbon emission and high-energy density is considered as one of the most promising future energy sources for human beings. However, the use of nuclear energy will inevitably lead to the discharge of nuclear waste and the consumption of uranium resources. Therefore, the development of simple, efficient, and economical uranium extraction methods is of great significance for the sustainable development of nuclear energy and the restoration of the ecological environment. Photocatalytic U(VI) extraction technology as a simple, highly efficient, and low-cost strategy, received increasing attention from researchers. In this review, the development background of photocatalytic U(VI) extraction and several photocatalytic U(VI) reduction mechanisms are briefly described and the identification methods of uranium species after photocatalytic reduction are addressed. Subsequently, the modification strategies of several catalysts used for U(VI) extraction are summarized and the advantages and disadvantages of photocatalytic U(VI) extraction are compared. Additionally, the research progress of photocatalytic technology for U(VI) extraction in actual uranium-containing wastewater and seawater are evaluated. Finally, the current challenges and the developments of photocatalytic U(VI) extraction technology in the future are prospected.

O and S co-doping induced N-vacancy in graphitic carbon nitride towards photocatalytic peroxymonosulfate activation for sulfamethoxazole degradation

Doping-induced vacancy engineering of graphitic carbon nitride (GCN) is beneficial for bandgap modulation, efficient electronic excitation, and facilitated charge carrier migration. In this study, synthesis of oxygen and sulphur co-doped induced N vacancies (OSGCN) by the hydrothermal method was performed to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) antibiotic degradation and H₂ production. The results from experimental and DFT simulation studies validate the synergistic effects of co-dopants and N-vacancies, i.e., bandgap lowering, electron-hole pairs separation, and high solar energy utilization. The substitution of sp² N atom by O and S co-dopants causes strong delocalization of HOMO-LUMO distribution, enhancing carrier mobility, increasing reactive sites, and facilitating charge-carrier separation. Remarkably, OSGCN/PMS photocatalytic system achieved 99.4% SMX degradation efficiency and a high H₂ generation rate of 548.23 μ mol g^-1 h^-1 within 60 min and 36 h, respectively under visible light irradiations. The SMX degradation kinetics was pseudo-first-order with retained recycling efficiency up to 4 catalytic cycles. The results of EPR and chemical scavenging experiments revealed the redox action of reactive oxidative species, wherein ¹O₂ was the dominant reactive species in SMX degradation. The identification of formed intermediates and the SMX stepwise degradation pathway was investigated via LC-MS analysis and DFT studies, respectively. The results from this work anticipated deepening the understanding of PMS activation by substitutional co-doping favoring N-vacancy formation in GCN lattice for improved photocatalytic activity.

Defect mediated visible light induced photocatalytic activity of Co3O4 nanoparticle decorated MoS2 nanoflower: A combined experimental and theoretical study

In this work, Co₃O₄ nanoparticle-decorated MoS₂ (MoS₂@Co₃O₄) hetero-nanoflowers were synthesized by a facile hydrothermal method, and the effect of Co₃O₄ on the morphological, structural, optical, electronic, and photocatalytic properties of MoS₂ was analyzed. The surface morphology of MoS₂ and MoS₂@Co₃O₄ was studied via field emission electron microscopy (FE-SEM) and transmission electron microscopy (TEM), which revealed a strong interaction between the MoS₂ nanoflower and the nanoparticles. The X-ray diffraction pattern showed a decrease in the crystallite sizes from 7.35 nm to 6.26 nm due to the incorporation of Co₃O₄. The UV-Vis spectroscopy of the analysis revealed that the indirect band gap of MoS₂ was reduced from 1.89 eV to 1.65 eV with the incorporation of Co₃O₄ nanoparticles. Density functional theory (DFT) calculations were used to investigate the electronic properties of MoS₂ and MoS₂@Co₃O₄ hetero-nanoflowers, which also showed a reduction in the electronic band gap for the Co₃O₄ nanoparticles that were injected. The presence of defect states was also observed in the electronic property of MoS₂@Co₃O₄. The photocatalytic activity of the prepared composite and nanoflower is studied using an aqueous solution of methylene blue (MB), and the efficiencies are found to be 27.96% for MoS₂ and 78.89% for MoS₂@Co₃O₄. The improved photocatalytic efficiency of MoS₂@Co₃O₄ hetero-nanoflower can be attributed to narrowing the band gap together with the creation of defect states by the injection of nanoparticles that slows down electron-hole recombination rate by trapping charge carrier. The degradation analysis of the composite provides a new route for the purification of polluted water.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO₂ reduction, and wastewater treatment.

Regulating Alkyl Chain Length on Quaternization TiO2 for Boosting Photocatalytic Performance: Synergism of Promoting Photogenerated Charge Separation and Improving Reactant Adsorption

To explore the effect of surface charge properties of a photocatalyst on photocatalytic activity, quaternization TiO₂ particles with different alkyl chain lengths (CT-X/P25) are first synthesized to boost the photocatalytic activity. The effect of a quaternary ammonium group with different alkyl chain lengths on the photocatalytic activity of CT-X/P25 is investigated. Interestingly, the introduction of a quaternary ammonium group on CT-X/P25 not only contributes to improving the photodegradation efficiency of anionic dyes due to enhancing of adsorption capacity through electrostatic attraction, but also it can improve the photodegradation efficiency of cationic dyes. Therefore, there seems to be another factor affecting the photocatalytic activity. The results of photoelectric characterization show that the photogenerated charge separation of CT-X/P25 is greatly enhanced, which is beneficial to improve the photocatalytic activity. Simultaneously, the results show that the difference in the photocatalytic activity of CT-X/P25 is mainly related to the charge intensity of -N⁺(CH₃)₂- in the quaternary amine salt. According to X-ray photoelectron spectroscopy, the charge intensity of -N⁺(CH₃)₂- in CT-X/P25 gradually increases with the increase in alkyl chain lengths, which is conducive to promoting photogenerated charge separation and improving the adsorption for anionic dyes. The photocatalytic activity has been further enhanced due to the enhancement of this synergy. In summary, the quaternary ammonium salt-modified CT-X/P25 shows an excellent synergistic effect on the process of photodegradation of anionic dyes: promoting photogenerated charge separation and adsorption.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Renewable and eco-friendly ZnO immobilized onto dead sea sponge floating materials with dual practical aspects for enhanced photocatalysis and disinfection applications

In this study, we have investigated the role of natural dead sea sponge (DSS, Porifera) as a three-dimensional (3D) porous host substrate for the immobilization of nanostructured ZnO material towards the development of ZnO based floating photocatalysts for efficient removal of methylene blue (MB) dye under the illumination of sunlight. After photodegradation, the treated water after dye degradation contains several pathogens, different disinfectants or chemical reagents that are essentially used. This is not the case for DSS as it can naturally kill any pathogens during the wastewater treatment process. To explore these functions, ZnO nanosheets were incorporated onto DSS via hydrothermal protocol and the as prepared ZnO/DSS hybrid material exhibited approximately ∼100% degradation efficiency for the removal of MB. Importantly, the degradation kinetics associated with the fabricated ZnO/DSS was remarkably accelerated as evidenced by the high values of degradation reaction rate constants (3.35 × 10^-2min^-1). The outperformance of ZnO/DSS could be attributed to the adsorption caused by its 3D porous structure together with the high rapid oxidation of MB. Furthermore, the high charge separation of electron-hole pairs, natural porosity, and abundant catalytic sites offered by the hybrid ZnO/DSS floating photocatalyst have enabled quantitative (∼100%) degradation efficiency for MB. Finally, the excellent reusability results confirm the feasibility of using natural ZnO/DSS-based photocatalyst for practical solution of wastewater treatment and other environmental problems.

A Review on Gallium Oxide Materials from Solution Processes

Gallium oxide (Ga₂O₃) materials can be fabricated via various methods or processes. It is often mentioned that it possesses different polymorphs (α-, β-, γ-, δ- and ε-Ga₂O₃) and excellent physical and chemical properties. The basic properties, crystalline structure, band gap, density of states, and other properties of Ga₂O₃ will be discussed in this article. This article extensively discusses synthesis of pure Ga₂O₃, co-doped Ga₂O₃ and Ga₂O₃-metal oxide composite and Ga₂O₃/metal oxide heterostructure nanomaterials via solution-based methods mainly sol-gel, hydrothermal, chemical bath methods, solvothermal, forced hydrolysis, reflux condensation, and electrochemical deposition methods. The influence of the type of precursor solution and the synthesis conditions on the morphology, size, and properties of final products is thoroughly described. Furthermore, the applications of Ga₂O₃ will be introduced and discussed from these solution processes, such as deep ultraviolet photodetector, gas sensors, pH sensors, photocatalytic and photodegradation, and other applications. In addition, research progress and future outlook are identified.

The strategy for organic dye and antibiotic photocatalytic removal for water remediation in an example of Co-SnO2 nanoparticles

A challenging problem to create an efficient photocatalyst suitable for industrial water remediation, aiming to remove cyclic organic compounds attracts increasing attention. The current study aimed to clarify a few "dark spots" in the field, namely to find out if it is possible to make an efficient photocatalyst activated with visible light by using a simple and cheap strategy and what are the key factor impacting its efficiency. In this work, a new procedure to obtain spherical nanoparticles with the same average size but different amounts of oxygen vacancies and defects and dopant concentrations was developed. The approach based on hydrothermal treatment was suggested to obtain rod-shaped nanoparticles. The systematic study of photocatalytic behavior on the example of oxytetracycline and methylene blue degradation under visible light of widely available LED lamp was performed. Based on chemical and computational experiments the main factor affecting the process efficiency was determined.

Ag Nanoparticles Decorated ZnO Nanorods as Multifunctional SERS Substrates for Ultrasensitive Detection and Catalytic Degradation of Rhodamine B

Industrial wastewater containing large amounts of organic pollutants is a severe threat to the environment and human health. Thus, the rapid detection and removal of these pollutants from wastewater are essential to protect public health and the ecological environment. In this study, a multifunctional and reusable surface-enhanced Raman scattering (SERS) substrate by growing Ag nanoparticles (NPs) on ZnO nanorods (NRs) was produced for detecting and degrading Rhodamine B (RhB) dye. The ZnO/Ag substrate exhibited excellent sensitivity, and the limit of detection (LOD) for RhB was as low as 10⁻¹¹ M. Furthermore, the SERS substrate could efficiently degrade RhB, with a degradation efficiency of nearly 100% within 150 min. Moreover, it retained good SERS activity after multiple repeated uses. The interaction between Ag NPs, ZnO, and RhB was further investigated, and the mechanism of SERS and photocatalysis was proposed. The as-prepared ZnO/Ag composite structure could be highly applicable as a multifunctional SERS substrate for the rapid detection and photocatalytic degradation of trace amounts of organic pollutants in water.

Multifunctional SERS chip mediated by black phosphorus@gold-silver nanocomposites inserted in bilayer membrane for in-situ detection and degradation of hazardous materials

Self-cleaning surface-enhanced Raman scattering (SERS) substrates dependent on versatile two-dimensional semiconductors offer an efficient channel for the sensitive monitoring and timely degradation of hazardous molecules. Herein, a kind of sophisticated SERS-active nanocomposites was developed by incorporating Au-Ag nanoparticles onto black phosphorus (BP) nanosheets via photo-induced self-reduction. Combining the substantial electromagnetic "hot spots" triggered by bimetallic plasma coupling effect and the efficient charge transfer from BP to probe molecules, the proposed nanocomposites featured attractive SERS enhancement, facilitating a limit of detection down to 4.5 × 10^-10 M. Attributed to the remarkable restriction of electron-hole recombination stemming from "Schottky contact", the photocatalytic activity of BP was prominently boosted, demonstrating a complete degradation time as short as 65 min. Furthermore, the disgusting instability of BP was considerably hindered by inserting the nanocomposites into various bilayer matrices with diverse hardness and viscosity inspired by cling film principle. Moreover, a significantly elevated collection rate high to 93.1% for in-situ detection was also achieved by the as-manufactured flexible SERS chips based on tape. This study illustrates a clear perspective for the development of versatile BP-based SERS chips which might facilitate sensitive analysis and treatment of perilous contaminants in complicated real-life scenarios.

Porous defective carbon ferrite for adsorption and photocatalysis toward nitrogen compounds in pre-treated biogas slurry

Carbon ferrite (C-Fe₃O₄) with hydrophilic functional groups and lattice defects was synthesized in anhydrous molten alkali system by fern leaves and ferric chloride as raw materials. Structural characterization results showed that carbon ferrite obtained oxygen-containing groups on the carbon surface. And structural pores and lattice defects resulted from spontaneous accumulation and “directive-connection” of ferrite (Fe₃O₄) nanoparticles. Carbon ferrite displayed an adsorption efficiency of 29.0% and excellent photocatalytic degradation of 80.8% toward nitrogen compounds (initial concentration of 430 mg/L) in pre-treated biogas slurry. The micromechanism for nitrogen compounds removal was discussed at the molecular/atomic level by exploring carbon ferrite “structure-activity”, which provides a design idea from microscopic perspective for the preparation of environmental materials with reactive sites.

A zero-dimensional/two-dimensional Ag-Ag2S-CdS plasmonic nanohybrid for rapid photodegradation of organic pollutant by solar light

Herein, the two synthesis strategies are employed for rational design of 0D/2DAg-Ag₂S-CdS heterojunctions towards photocatalytic degradation of methyl orange (MO) under simulated solar light. As the first strategy, a ternary Ag-Ag₂S-CdS nanosheet (NS) heterojunction was fabricated via combined cation exchange and photo-reduction (CEPR) method (Ag-Ag₂S-CdS/CEPR). The second strategy employed coprecipitation (CP) method (Ag-Ag₂S-CdS/CP). Strikingly, SEM, TEM and HR-TEM images are manifested the first strategy is beneficial for retaining the original thickness (20.2 nm) of CdS NSs with a dominant formation of metallic Ag, whereas the second strategy increases the thickness (33.4 nm) of CdS NSs with a dominant formation of Ag₂S. The Ag-Ag₂S-CdS/CEPR exhibited 1.8-fold and 3.5-fold enhancement in photocatalytic activities as compared to those of Ag-Ag₂S-CdS/CP and bare CdS NSs, respectively. This enhanced photocatalytic activity could be ascribed to fact that the first strategy produces a high-quality interface with intimate contact between the Ag-Ag₂S-CdS heterojunctions, resulting in enhanced separation of photo-excited charge carriers, extended light absorption, and enriched active-sites. Furthermore, the degradation efficiency of Ag-Ag₂S-CdS/CEPR was significantly reduced to ∼5% in the presence of BQ (•O₂^- scavenger), indicating that •O₂^- is the major active species that can decompose MO dye under simulated solar light.

Recent advances in biological applications of nanomaterials through defect engineering

In recent years, defect engineering sprung up in the artificial nanomaterials (NMs) has attracted significant attention, since the physical and chemical properties of NMs could be largely optimized based on the rational control of different defect types and densities. Defective NMs equipped with the improved electric and catalytic ability, would be widely utilized as the photoelectric device and catalysts to alleviate the growing demands of industrial production and environmental treatments. In particular, considering that the features of targeting, adsorptive, loading and optical could be adjusted by the introduction of defects, numerous defective NMs are encouraged to be applied in the biological fields including bacterial inactivation, cancer therapy and so on. And this review is devoted to summarize the recent biological applications of NMs with abundant defects. Moreover, the opportunity of these defective NMs released into the surrounding environment continue to increase, the direct and indirect contact with biological molecules and organisms would be inevitable. Due to its high reactivity and adsorption triggered by defects, NMs tend to exhibit overestimate biological behaviors and effects on organisms. Thus, the sections regarding toxicological effects of NMs with abundant defects are also carried out to supplement the safety assessments of NMs and guide further applications in the industrial production and living.

Enhanced photocatalytic activities of facile auto-combustion synthesized ZnO nanoparticles for wastewater treatment: An impact of Ni doping

In the current work, we present the facile one-pot synthesis of 0.0, 0.5, 1.0, 2.0 and 3.0 wt% of Ni doped ZnO nanoparticles (Ni:ZnO NPs) through combustion route at 550 °C. Structural and vibrational studies approve the synthesis of monophasic hexagonal Ni:ZnO NPs. The crystallite size was calculated to be in the range of 36-60 nm for pure and doped samples. The composition of all elements in the final product along with their homogeneity, was approved through EDX/FESEM e-mapping analysis. The morphology and phase confirmation of the prepared samples was investigated through FESEM and TEM/HRTEM analyses. TEM/HRTEM study shows that the size of grains is within the range of 100 nm and grown along the c-axis as the lattice spacing is found ∼2.6005 Å. Diffused reflectance study was used to estimate the energy gap for all samples and found to reduce from 3.287 eV for pure to 3.258 eV for 3.0 wt% Ni doping. From an applications point of view, the photocatalytic performance of Ni:ZnO NPs was studied, and with 3.0 wt% of Ni doping in ZnO the degradation of methylene blue (MB) and tetracycline (TCN) pollutants were found to be remarkably improved.

Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future

The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.

Topotactic formation of poriferous (Al,C)-Ta2O5 mesocrystals for improved visible-light photocatalysis

Poriferous monocrystal-like nanostructures are contributing to fabricate long-distance charge transfer pathways and rapid diffusions of the degraded products, and attracts wide attentions. In this work, layered and poriferous (Al,C)-Ta₂O₅ mesocrystals were fabricated by topotactic transformation strategy with Ta₄AlC₃ MAX as starting materials for visible-light photocatalytic antibiotic degradation. The prepared sample exhibited enhanced visible-light absorption and visible-light photocatalytic performance, far superior to those of commercial Ta₂O₅ and Ta₄AlC₃ MAX, which was mainly because of the elemental doping in the samples. The experimental results also indicated that continuous attacks of the photo-generated holes and ·O₂^- species efficiently induced efficient visible-light photodegradation of tetracycline. Current work also indicates a new and potential tantalum-based semiconductors for high-performance environmental photocatalysis.

Phenolic compounds degradation: Insight into the role and evidence of oxygen vacancy defects engineering on nanomaterials

Oxygen vacancy as a typical point defect has incited substantial interest in photocatalysis due to its profound impact on optical absorption response and facile isolation of photocarriers. The presence of oxygen vacancy can introduce the midgap defect states, which promote extended absorption in the visible region. The redistribution of electron density at the surface can stimulate the adsorption and activation kinetics of adsorbates, manifesting optimal photocatalytic performance. Despite such alluring outcomes, the ambiguity in understanding the precise location, appropriate concentration, and oxygen vacancy role is still a long-standing task. The present review article comprehensively outlines the identification of oxygen vacancy defects at bulk or on the surface and its ultimate effect on the photocatalytic degradation of phenolic compounds. Particular emphasis has been drawn to summarize the critical influence of oxygen vacancy on different factors such as crystal structure, bandgap energy, electronic structure, and charge carrier mobility by integrating experimental results and theoretical calculations. We have also explored the reaction pathways and the intermediate chemistry of phenol photodegradation by analyzing the molecular activation (O₂, H₂O, and sulphate activation) through oxygen vacancy defects. Finally, the review concludes with the various challenges and future perspectives, aiming to provide a firm base for further progressions towards photocatalysis.

Electrospun Ceramic Nanofibers for Photocatalysis

Ceramic fiber photocatalysts fabricated by electrospinning hold great potential in alleviating global environmental and energy issues. However, many challenges remain in improving their photocatalytic efficiencies, such as the limited carrier lifetime and solar energy utilization. To overcome these predicaments, various smart strategies have been invented and realized in ceramic fiber photocatalysts. This review firstly attempts to summarize the fundamental principles and bottlenecks of photocatalytic processes. Subsequently, the approaches of doping, surface plasmon resonance, and up-conversion fluorescent to enlarge the light absorption range realized by precursor composition design, electrospinning parameter control, and proper post heat-treatment process are systematically introduced. Furthermore, methods and achievements of prolonging the lifetime of photogenerated carriers in electrospun ceramic fiber photocatalysts by means of introducing heterostructure and defective composition are reviewed in this article. This review ends with a summary and some perspectives on the future directions of ceramic fiber photocatalysts.

Photocatalytic activity of silica and silica-silver nanocolloids based on photo-induced formation of reactive oxygen species

Semiconductor nanomaterials are often proposed as photocatalysts for wastewater treatment; silica nanomaterials are still largely unexploited because their photocatalytic performances need improvements, especially under visible light. The present study is a proof-of-concept that amorphous silica colloids once submitted to the proper surface modifications change into an efficient photocatalyst even under low-energy illumination source. For this reason, silica-based colloidal nanomaterials, such as bare (SiO₂ NPs), aminated (NH₂-SiO₂ NPs), and Ag NPs-decorated (Ag-SiO₂ NPs) silica, are tested as photocatalysts for the degradation of 9-anthracenecarboxylic acid (9ACA), taken as a model aromatic compound. Interestingly, upon irradiation at 313 nm, NH₂-SiO₂ NPs induce 9ACA degradation, and the effect is even improved when Ag-SiO₂ NPs are used. On the other hand, irradiation at 405 nm activates the plasmon of Ag-SiO₂ NPs photocatalyst, providing a faster and more efficient photodegradation. The photodegradation experiments are also performed under white light illumination, employing a low-intensity fluorescent lamp, confirming satisfying efficiencies. The catalytic effect of SiO₂-based nanoparticles is thought to originate from photo-excitable surface defects and Ag NP plasmons since the catalytic degradation takes place only when the 9ACA is adsorbed on the surface. In addition, the involvement of reactive oxygen species was demonstrated through a scavenger use, obtaining a yield of 17%. In conclusion, this work shows the applicability of silica-based nanoparticles as photocatalysts through the involvement of silica surface defects, confirming that the silica colloids can act as photocatalysts under irradiation with monochromatic and white light. Silica and Ag-decorated silica colloids photosensitize the formation of Reactive Oxygen Species with 17% efficiencies. ROS are able to oxidase aromatic pollutants chemi-adsorbed on the surface of the colloids. Silica-silver nanocomposites present a photocatalytic activity useful to degrade aromatic compounds.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Simultaneous introduction of oxygen vacancies and hierarchical pores into titanium-based metal-organic framework for enhanced photocatalytic performance

Photo-generated radicals play an important role in photocatalytic reactions, yet numerous radicals undergo self-quenching before contact with the substrate because of their ultrafast lifetimes and limited diffusion distances, which decreases the utilization of free radicals and reduces the activity of photocatalysts. Herein, both hierarchical pores and oxygen vacancies (OVs) were successfully introduced into a titanium-based metal-organic framework (MOF), namely MIL-125-NH₂ (MIL for Materials of Institut Lavoisier), via a simple and controllable acid etching method. The generation of OVs increased the yield of photogenerated radicals, while the hierarchical pore structure conferred a pore enrichment effect, thus enhancing the utilization of photogenerated radicals. Owing to the synergistic effect of the hierarchical pores and OVs, the obtained single-crystal nanoreactor, H-MIL-125-NH₂-V_O, showed much higher catalytic activity for rhodamine (RhB) degradation than pristine MIL-125-NH₂. In fact, the rate constant for catalytic RhB degradation in H-MIL-125-NH₂-V_O was approximately eight times that of MIL-125-NH₂. This work highlights the significant contribution of both hierarchical pores and OVs to enhancing the photocatalytic performance of MOFs.

High UV and Sunlight Photocatalytic Performance of Porous ZnO Nanostructures Synthesized by a Facile and Fast Microwave Hydrothermal Method

The degradation of organic pollutants in wastewaters assisted by oxide semiconductor nanostructures has been the focus of many research groups over the last decades, along with the synthesis of these nanomaterials by simple, eco-friendly, fast, and cost-effective processes. In this work, porous zinc oxide (ZnO) nanostructures were successfully synthesized via a microwave hydrothermal process. A layered zinc hydroxide carbonate (LZHC) precursor was obtained after 15 min of synthesis and submitted to different calcination temperatures to convert it into porous ZnO nanostructures. The influence of the calcination temperature (300, 500, and 700 °C) on the morphological, structural, and optical properties of the ZnO nanostructureswas investigated. All ZnO samples were tested as photocatalysts in the degradation of rhodamine B (RhB) under UV irradiation and natural sunlight. All samples showed enhanced photocatalytic activity under both light sources, with RhB being practically degraded within 60 min in both situations. The porous ZnO obtained at 700 °C showed the greatest photocatalytic activity due to its high crystallinity, with a degradation rate of 0.091 and 0.084 min^-1 for UV light and sunlight, respectively. These results are a very important step towards the use of oxide semiconductors in the degradation of water pollutants mediated by natural sunlight.

Combined Spectroscopic Methods of Determination of Density of Electronic States: Comparative Analysis of Diffuse Reflectance Spectroelectrochemistry and Reversed Double-Beam Photoacoustic Spectroscopy

The diffuse reflectance spectroelectrochemistry (SE-DRS) and reversed double-beam photoacoustic spectroscopy (RDB-PAS) provide unique, complementary information on the density of electronic states (DOS) in the vicinity of the conduction band bottom. The measurements are performed under quite different conditions, representing the solid/liquid and solid/gas interfaces in SE-DRS and RDB-PAS, respectively. DOS profiles obtained from both types of measurements can be considered as unique "fingerprints" of the tested materials. The analysis of DOS profiles recorded for 16 different TiO₂ samples confirms that both methods similarly describe the shapes of DOS profiles around the conduction band edges. The states characterized by energy higher than VBT (valence-band top) + E_g can be considered as electronic states within the conduction band. Recognition of the potential of the conduction band bottom allows one to classify the electronic states as deep or shallow electron traps or conduction band states, which play different roles in photocatalysis. The comparative analysis shows that both methods provide very useful information which can be used in understanding and predicting the photo(electro)catalytic reactivity of semiconductors.

Impact of Al doping on a hydrothermally synthesized β-Ga2O3 nanostructure for photocatalysis applications

Aluminum (Al)-doped beta-phase gallium oxide (β-Ga₂O₃) nanostructures with different Al concentrations (0 to 3.2 at%) are synthesized using a hydrothermal method. The single phase of the β-Ga₂O₃ is maintained without intermediate phases up to Al 3.2 at% doping. As the Al concentration in the β-Ga₂O₃ nanostructures increases, the optical bandgap of the β-Ga₂O₃ increases from 4.69 (Al 0%) to 4.8 (Al 3.2%). The physical, chemical, and optical properties of the Al-doped β-Ga₂O₃ nanostructures are correlated with photocatalytic activity via the degradation of a methylene blue solution under ultraviolet light (254 nm) irradiation. The photocatalytic activity is enhanced by doping a small amount of substitutional Al atoms (0.6 at%) that presumably create shallow level traps in the band gap. These shallow traps retard the recombination process by separating photogenerated electron–hole pairs. On the other hand, once the Al concentration in the Ga₂O₃ exceeds 0.6 at%, the crystallographic disorder, oxygen vacancy, and grain boundary-related defects increase as the Al concentration increases. These defect-related energy levels are broadly distributed within the bandgap, which act as carrier recombination centers and thereby degrade the photocatalytic activity. The results of this work provide new opportunities for the synthesis of highly effective β-Ga₂O₃-based photocatalysts that can generate hydrogen gas and remove harmful volatile organic compounds.

The photocatalytic activity is correlated with different parameters affecting the photocatalytic reactions; redox potential (RP), surface area (SA), crystal defect (CD), oxygen defect (OD), and grain-boundary induced defect (GD).

Direct Magnetic Reinforcement of Electrocatalytic ORR/OER with Electromagnetic Induction of Magnetic Catalysts

Designing stable and efficient electrocatalysts for both oxygen reduction and evolution reactions (ORR/OER) at low-cost is challenging. Here, a carbon-based bifunctional catalyst of magnetic catalytic nanocages that can direct enhance the oxygen catalytic activity by simply applying a moderate (350 mT) magnetic field is reported. The catalysts, with high porosity of 90% and conductivity of 905 S m^-1 , are created by in situ doping metallic cobalt nanodots (≈10 nm) into macroporous carbon nanofibers with a facile electrospinning method. An external magnetic field makes the cobalt magnetized into nanomagnets with high spin polarization, which promote the adsorption of oxygen-intermediates and electron transfer, significantly improving the catalytic efficiency. Impressively, the half wave-potential is increased by 20 mV for ORR, and the overpotential at 10 mA cm^-2 is decreased by 15 mV for OER. Compared with the commercial Pt/C+IrO₂ catalysts, the magnetic catalyzed Zn-air batteries deliver 2.5-fold of capacities and exhibit much longer durability over 155 h. The findings point out a very promising strategy of using electromagnetic induction to boost oxygen catalytic activity.

Magnetic recyclable α-Fe2O3–Fe3O4/Co3O4–CoO nanocomposite with a dual Z-scheme charge transfer pathway for quick photo-Fenton degradation of organic pollutants

A novel α-Fe₂O₃–Fe₃O₄/Co₃O₄–CoO nanocomposite was developed, integrating multiple degradation pathways. The Z-scheme configuration and oxygen vacancies contributes to in situ H₂O₂ formation and simultaneous reactivation showing excellent performance.

Pyrochlore oxides as visible light-responsive photocatalysts

This perspective describes the use of pyrochlore oxides in photocatalysis with focus on the strategies to enhance their activity.