Photoreduction route for Cu2O/TiO2 nanotubes junction for enhanced photocatalytic activity

XPS valence band observable light-responsive system for photocatalytic acid Red114 dye decomposition using a ZnO-Cu2O heterojunction

ZnO-Cu2O composites were made as photocatalysts in a range of different amounts using an easy, cheap, and environment-friendly coprecipitation method due to their superior visible light activity to remove pollutants from the surrounding atmosphere. X-ray diffraction and Fourier transform infrared spectroscopy (FT-IR) have demonstrated that ZnO-Cu2O catalysts are made of highly pure hexagonal ZnO and cubic Cu2O. X-ray photoelectron spectroscopy has confirmed that there is a substantial interaction between the two phases of the resultant catalyst. The optical characterizations of the synthesized ZnO-Cu2O composite were done via UV-vis reflectance spectroscopy. Due to the doping on ZnO, the absorption range of the ZnO-Cu2O catalyst is shifted from the ultraviolet to the visible region due to diffuse reflection. The degradation efficiency is affected by the Ratio of ZnO: Cu2O and ZnO-Cu2O composite with a proportion of 90:10 exhibited the most prominent photocatalytic activity on Acid Red 114, with a pseudo-first-order rate constant of 0.05032 min-1 that was 6 and 11 times greater than those of ZnO and Cu2O, respectively. The maximum degradation efficiency is 97 %. The enhanced photocatalytic activity of the composite is caused by the synergistic interaction of ZnO and Cu2O, which improves visible light absorption by lowering band gap energy and decreasing the rate at which the electron-hole pairs recombine. The scavenging experiment confirmed that hydroxyl radical was the dominant species for the photodegradation of Acid Red 114. Notably, the recycling test demonstrated the ZnO-Cu2O photocatalyst was highly stable and recyclable. These results suggest that the ZnO-Cu2O mix might be able to clean up environmental pollutants when it meets visible light.

Facile synthesis of nanocellulose-based Cu2O/Ag heterostructure as a surface-enhanced Raman scattering substrate for trace dye detection

Semiconductor metal-oxide/metal heterostructures with synergetic properties have potential applications in photocatalysis and optical sensors. Here, Cu₂O sub-micro cubes were synthesized under environmentally benign conditions using 2, 2, 6, 6-tetramethylpyperdine-1-oxyl (TEMPO)-oxidized cellulose nanofibrils as a reducing and stabilizing agent. Then the surface of the Cu₂O cubes was decorated with silver nanoparticles (AgNPs) by a substitution reaction. The Cu₂O/Ag heterostructures within the cellulose nanofibrils (CNFs) network were employed as a promising surface-enhanced Raman scattering (SERS) assay for efficient sensing of methylene blue (MB), reaching a maximum enhancement factor (EF) of 4.0 × 10⁴. Their SERS intensities depended on the coverage density of AgNPs and the wavelength of the excitation laser. The excellent SERS performance may result from the charge transfer between Ag and Cu₂O molecules and the strong electromagnetic field at the interface. The CNF-Cu₂O/Ag substrates were capable of detecting MB dye down to 10^-8 M level with a relative standard deviation of 10-15%, demonstrating great sensitivity and reproducibility.

Fabrication of Bi2MoO6 Nanosheets/TiO2 Nanorod Arrays Heterostructures for Enhanced Photocatalytic Performance under Visible-Light Irradiation

Bi₂MoO₆/TiO₂ heterostructures (HSs) were synthesized in the present study by growing Bi₂MoO₆ nanosheets on vertically aligned TiO₂ nanorod arrays using a two-step solvothermal method. Their morphology and structure were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. Excellent visible-light absorption was observed by UV–Vis absorption spectroscopy, which was attributed to the presence of the Bi₂MoO₆ nanosheets with a narrow-band-gap. The specific surface area and pore volume of the photocatalysts were significantly increased due to the hierarchical structure composed of Bi₂MoO₆ nanosheets and TiO₂ nanorods. The photoluminescence and photoelectrochemical characterizations showed improved separation and collection efficiency of the Bi₂MoO₆/TiO₂ HSs towards the interface charge carrier. The photocatalytic analysis of the Bi₂MoO₆/TiO₂ HSs demonstrated a significantly better methylene blue (MB) degradation efficiency of 95% within 3 h than pristine TiO₂ nanorod arrays under visible-light irradiation. After three photocatalytic cycles, the degradation rate remained at ~90%. The improved performance of the Bi₂MoO₆/TiO₂ HSs was attributed to the synergy among the extended absorption of visible light; the large, specific surface area of the hierarchical structure; and the enhanced separation efficiency of the photogenerated electron-hole pairs. Finally, we also established the Bi₂MoO₆/TiO₂ HSs band structure and described the photocatalytic dye degradation mechanism. The related electrochemical analysis and free-radical trapping experiments indicated that h⁺, ·O₂⁻ and ·OH have significant effects on the degradation process.

Simultaneous Tuning Band Gaps of Cu2 O and TiO2 to Form S-Scheme Hetero-Photocatalyst

Photocatalytic Z or S scheme merits higher redox potentials and faster charge separation. However, heterostructure photocatalysts with band gaps of bulk materials often have a type I band structure leading to poor photocatalytic activity. In view of this, we report simultaneous tuning of band gaps of Cu₂ O and TiO₂ , where quantum dot Cu₂ O nanoparticles were formed on doped TiO₂ with Ti³⁺ . The reduced size of Cu₂ O made its conduction band more negative, whereas the introduction of Ti³⁺ made the absorption edge red shift to the visible light region. The as-formed heterostructure enabled an S-Scheme mechanism with remarkable activity and stability for visible light photodegradation of 4-chlorophenol (4-CP). The as-obtained photocatalysts' activity demonstrated ca. 510-fold increase as compared to individual ones and a mechanical blend. The as-obtained photocatalysts maintained over 80 % for 5 cycles and 2 months exposure to O₂ did not decrease the degradation rate. ESR characterization and scavenger experiments proved the S-Scheme mechanism.

Enhanced solar water splitting using plasmon-induced resonance energy transfer and unidirectional charge carrier transport

Solar water splitting by photoelectrochemical (PEC) reactions is promising for hydrogen production. The gold nanoparticles (AuNPs) are often applied to promote the visible response of wideband photocatalysts. However, in a typical TiO₂/AuNPs structure, the opposite transfer direction of excited electrons between AuNPs and TiO₂ under visible light and UV light severely limits the solar PEC performance. Here we present a unique Pt/TiO₂/Cu₂O/NiO/AuNPs photocathode, in which the NiO hole transport layer (HTL) is inserted between AuNPs and Cu₂O to achieve unidirectional transport of charge carriers and prominent plasmon-induced resonance energy transfer (PIRET) between AuNPs and Cu₂O. The measured applied bias photon-to-current efficiency and the hydrogen production rate under AM 1.5G illumination can reach 1.5% and 16.4 μmol·cm^-2·h^-1, respectively. This work is original in using the NiO film as the PIRET spacer and provides a promising photoelectrode for energy-efficient solar water splitting.

Peroxymonosulfate Activation on a Hybrid Material of Conjugated PVC and TiO2 Nanotubes for Enhancing Degradation of Rhodamine B under Visible Light

Visible-light-driven photocatalysis is a robust technology for amending the negative effect of pollutants on the environment with a minimum energy use. Herein, we describe a simple approach to producing such a photocatalyst by coupling conjugated polyvinyl chloride (cPVC) with the TiO2 nanotube (TNT) thermolysis method. By activating peroxymonosulfate (PMS) to make a cPVC/TNT/PMS system using visible light as the source, we obtain a significant enhancement in the photocatalytic performance. We show that PMS use at a concentration of 3 mM can fully degrade rhodamine B (RhB) solution at a remarkably high concentration (200 mg L-1) just in 120 min under visible light. The cPVC/TNT/PMS system also shows excellent stability in recycling tests for at least five times. Further, by confining the active species in photocatalytic reactions, we report a thorough understanding of the extent of involvement from those radicals. Our work presents a robust approach to make a high-performance, visible-light-driven photocatalyst, which can be potentially used in practice.

Au-Mediated Charge Transfer Process of Ternary Cu2O/Au/TiO2-NAs Nanoheterostructures for Improved Photoelectrochemical Performance

Based on a facile three-step preparation method, Cu2O/Au/TiO2-NAs ternary heterojunction nanocomposites have been successfully synthesized by electrodepositing a Cu2O layer on the surface of Au nanoparticles (NPs) decorated highly ordered TiO2 nanotube arrays (NAs). The structure, surface morphology, chemical composition, and optical and intrinsic defects properties of the as-prepared samples are characterized by transmission and scanning electron microscopy (TEM and SEM), X-ray diffraction (XRD), UV-vis light absorbance spectra, Raman scattering, and X-ray photoelectron spectroscopy (XPS). Simultaneously, the Cu2O/Au/TiO2-NAs ternary nanohybrids exhibited progressively improved photoelectrocatalytic (PEC) performance compared with the dual Cu2O/TiO2-NAs type-II nanoheterojunctions, confirming by the photocurrent density versus testing time curve (amperometric I-t curve), open-circuit potential versus testing time curve (V oc-t curve), and electrochemical impedance spectroscopy (EIS) measurements, which were mainly ascribed to the synergistic effect of reduced interfacial charge transfer resistance and boosted energetic charge carriers generation associated with embedding Au NPs. Furthermore, the self-consistent charge transfer mechanism of Z-scheme and interband transitions mediated with Au NPs for Cu2O/Au/TiO2-NAs triple nanocomposites is proposed, which was evaluated by nanosecond time-resolved transient photoluminescence (NTRT-PL) spectra excited by 266 and 400 nm, respectively. Following this scheme, UV-vis light photocatalytic activities of Cu2O/Au/TiO2-NAs ternary nanohybrids were elaborated toward photodegradation of methyl orange (MO) in aqueous solution, and the photodegradation rate of optimum triple nanocomplex was found to be 90%.

New titania-based photocatalysts for hydrogen production from aqueous-alcoholic solutions of methylene blue

A series of CuO_x–TiO₂ photocatalysts were prepared using fresh and thermally activated Evonik Aeroxide P25 titanium dioxide. The photocatalysts were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, XANES, diffuse reflectance spectroscopy, and N₂ adsorption technique. Photocatalytic activity of the samples was tested in hydrogen production from aqueous-alcoholic solutions of methylene blue under UV radiation (λ = 386 nm). It was found for the first time the synergistic effect of hydrogen production from two substrates—dye and ethanol. The maximum hydrogen production rate in the system water–ethanol–methylene blue was 1 μmol min⁻¹, which is 25 times higher than a value measured in a 10% solution of ethanol in water. The thermal activation of titania also leads to a change in the rate of hydrogen production. The highest catalytic activity was observed for a CuO_x–TiO₂ photocatalyst based on titania thermally-activated at 600 °C in air. A mechanism of the photocatalytic reaction is discussed.

Simultaneous presence of ethanol and methylene blue was shown to provide the most efficient hydrogen production and methylene blue removal.

g-C3N4-Mediated Synthesis of Cu2O To Obtain Porous Composites with Improved Visible Light Photocatalytic Degradation of Organic Dyes

A highly porous architecture of graphitic carbon nitride g-C3N4/Cu2O nanocomposite in the form of cubes with a side length of ≈ 1 μm, large pores of 1.5 nm, and a high surface area of 9.12 m2/g was realized by an optimized in situ synthesis protocol. The synthesis protocol involves dispersing a suitable "Cu" precursor into a highly exfoliated g-C3N4 suspension and initiating the reaction for the formation of Cu2O. Systematic optimization of the conditions and compositions resulted in a highly crystalline g-C3N4/Cu2O composite. In the absence of g-C3N4, the Cu2O particles assemble into cubes with a size of around 300 nm and are devoid of pores. Detailed structural and morphological evaluations by powder X-ray diffraction and field emission scanning electron microscopy revealed the presence of highly exfoliated g-C3N4, which is responsible for the formation of the porous architecture in the cube like assembly of the composite. The micrographs clearly reveal the porous structure of the composite that retains the cubic shape of Cu2O, and the energy-dispersive spectroscopy supports the presence of g-C3N4 within the cubic morphology. Among the different g-C3N4/Cu2O compositions, CN/Cu-5 with 10% of g-C3N4, which is also the optimum composition resulting in a porous cubic morphology, shows the best visible light photocatalytic performance. This has been supported by the ultraviolet diffuse reflectance spectroscopy (UV-DRS) studies of the composite which shows a band gap of around 2.05 eV. The improved photocatalytic performance of the composite could be attributed to the highly porous morphology along with the suitable optical band gap in the visible region of the solar spectrum. The optimized composite, CN/Cu-5, demonstrates a visible light degradation of 81% for Methylene Blue (MB) and 85.3% for Rhodamine-B (RhB) in 120 min. The decrease in the catalyst performance even after three repeated cycles is less than 5% for both MB and RhB dyes. The rate constant for MB and RhB degradation is six and eight times higher with CN/Cu-5 when compared with the pure Cu2O catalyst. To validate our claim that the dye degradation is not merely decolorization, liquid chromatography-mass spectroscopy studies were carried out, and the end products of the degraded dyes were identified.

Surface Assistant Charge Separation in PEC Cu2S-Ni/Cu2O Cathode

Fabrication of a high efficiency photocathode is a challenging issue in photoelectrocatalysis (PEC). In this work, a Cu₂S-Ni/Cu₂O photocathode was constructed via electrodeposition followed by a two-step overlayer deposition procedure including direct-current magnetron sputtering (DCMS) and ion exchange reaction. We found that the presence of Ni in the inner-layer could not only affect the morphology but also enhance the formation rate of the outer-layer Cu₂S. The XPS results indicate that the Ni exist as NiO_x instead of Ni⁰. The photocurrent of Cu₂S-Ni/Cu₂O achieved 2 times of it on the pristine Cu₂O. The charge dynamic characterizations, including electrochemical impedance spectroscopy (EIS), Tafel slopes, and photoluminescence (PL) spectra, demonstrated that the Ni can promote the hydrogen evolution reaction follow the Heyrovsky reaction, while Cu₂S shows a crucial role on the surface charge separation. At last, surface photovoltage microscopy (SPVM) technology was used to reveal the function of each overlayer. It gives direct evidence for the charge transportation pathway in the system and explains the function of each component.