Fast photocatalytic degradation of dyes using low-power laser-fabricated Cu2O–Cu nanocomposites

Synthesis and Characterization of MO:ZnO/Fe2O3 Nanocomposite and Its Effectiveness in the Degradation of Green Malachite Dye: Molecular Dynamics and Electronic Properties Study of Green Malachite Adsorption

Nanocomposites have attracted significant attention from researchers due to their remarkable chemical, adsorptive, and thermal properties. This work focuses on the synthesis of the montmorillonite modified with octadecylamine (MO):ZnO/Fe2O3 (MO:ZnO/Fe2O3) nanocomposite. The ZnO/Fe2O3 nanocomposite and MO were mixed in solution to create the component. XRD, FTIR, BET, TEM, MEB, and UV-vis were used to characterize the materials. In terms of their textural, morphological, and structural characteristics, interesting results were found. After 30 min of sunlight exposure, 96.12% of the GM dye can be degraded using just 0,02 g of MO:ZnO/Fe2O3 (1:2(1/0.05)). In contrast, ZnO NPs exhibited the highest percentage of degradation under UV light, achieving 91.85%. The greater efficiency of MO:ZnO/Fe2O3 under sunlight is attributed to its narrower band gap of 2.25 eV, which enables better utilization of visible light. Next using the Forcite and CASTEP modules in the Material Studio software, the GM dye's adsorption behavior on the surface of the as-prepared nanocomposite was analyzed. The results demonstrate that the GM/MO interaction is of the chemisorption type, predominantly governed by hydrogen bonding, electrostatic interactions, and π-π interactions between GM molecules. The ZnO (100) surface exhibits the highest density of active sites for GM degradation via a chemisorption adsorption process. Molecular dynamics simulations at 289.15 K reveal that the redox processes responsible for the degradation of the GM pollutant and its conversion into CO2 gas are exothermic. For ZnO, the electronic properties yield a band gap of 2.686 eV. For GM/ZnO (100) and GM/ZnO (101), the band gaps were determined to be 0.291 and 2.704 eV, respectively, by using a 340 eV cutoff energy and the GGA RPBE pseudofunctional.

Enhanced Fenton-Photocatalytic Degradation of Rhodamine B over Cobalt Ferrite Nanoparticles Synthesized by a Polyvinylpyrrolidone-Assisted Grinding Method

A simple grinding method using polyvinylpyrrolidone (PVP) as a capping agent is introduced to synthesize CoFe2O4 nanoparticles. The effects of calcination temperature (ranging from 450 to 850 °C) on the structural, morphological, physical, and optical properties of the materials are investigated using various techniques, including thermogravimetric analysis/differential scanning calorimetry (TGA/DSC), powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), N2 adsorption isotherm, ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), and vibrating sample magnetometry (VSM). The presence of PVP significantly suppresses the agglomeration of the materials, resulting in a nanocrystalline size of 18 nm for a sample calcined at 650 °C, which is approximately 38% smaller than that of the sample synthesized without PVP. Among the materials studied, the sample calcined at 650 °C exhibits unique properties, including optimal average pore size, specific surface area, and band gap energy, contributing to its superior photocatalytic degradation of rhodamine B via the Fenton reaction. Systematic experiments are performed to investigate the effects of pH, catalyst dosage, dye, and H2O2 concentrations and competitive anions on the rhodamine B degradation. Additionally, the Fenton photodegradation of RhB on CoFe2O4 is well-fitted to the first-order kinetic model. The redox pairs of Co(III)/Co(II) and Fe(III)/Fe(II) in the CoFe2O4 spinel structure might facilitate the formation of Fenton radicals, contributing to the decomposition of RhB through a proposed four-step mechanism. Notably, the material exhibits a strong magnetic response and maintains its excellent performance over five cycles, demonstrating the high potential for reusability as a photocatalyst.

Development and Performance of a PANI@NiMnO3 Nanocomposite for Enhanced Supercapacitors and Photocatalytic Applications

Conductive polymers are gaining considerable attention as a potential material for supercapacitor electrodes due to their favorable properties. Among these, polyaniline (PANI) stands out as a cost-effective and easy to synthesize, making it a promising candidate for improving energy storage applications. This study presents the synthesis of a hybrid composite consisting of PANI and NiMnO3 (NMO) perovskite using the chemical oxidative polymerization method. The morphology and structure of the composite were analyzed by using scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. XRD results showed that the addition of NMO transformed the amorphous structure of PANI into a semicrystalline form, leading to enhanced conductivity. SEM images revealed a more uniform and compact structure, with NMO distributed unevenly within the polymer matrix. Optical analysis indicated that a reduction in the band gap of PANI@NMO reached 2.5 eV. N2 adsorption-desorption measurements confirmed an increase in the surface area and pore volume. The photocatalytic activity of the PANI@NMO nanocomposite was tested by degrading methylene blue (MB) dye under UV/visible light. The nanocomposite showed high efficiency, degrading 87.75% of MB dye after 125 min of irradiation as compared to their counter parts. Additionally, electrochemical tests demonstrated an improved electrochemical performance of the composite due to enhanced crystallinity, increased surface area, and reduced electron-hole recombination rate. These results suggest that the PANI@NMO nanocomposite has great potential for use in supercapacitors and photocatalysis.

Preparation magnetic graphene oxide/diethylenetriamine composite for removal of methylene blue from aqueous solutions

Graphene oxide (GO) and its derivatives have several applications in many areas such as environmental and energy materials, water treatment and biomedical technologies. Because of having various polar groups on its surface, GO is considered as an excellent adsorbent. However, for many applications such as adsorption of pollution from aqueous solutions, chemical functionalization of graphene oxide is often a necessary requirement. In the present study, a new composite from graphene oxide, diethylenetriamine (DETA) and silica coated MnFe2O4 nanoparticles (GO/DETA/MnFe2O4@SiO2) was prepared. The structure, thermal stability and magnetic properties of the composite were studied by FT-IR, XRD, SEM, EDS, VSM and TGA spectroscopic methods. The prepared composite showed magnetic property with a saturation magnetization of 3.0 emu/g. The adsorption properties of GO/DETA/MnFe2O4@SiO2 composite for methylene blue (MB) in aqueous solution were studied using batch method. The effects of important parameters on the surface adsorption process of MB, including pH, contact time, adsorbent dosage and initial dye concentration were investigated. The adsorption isotherm was in accordance with Langmuir model showing surface homogeneity of the adsorbent. According to the Langmuir analysis, the maximum adsorption capacity (qm) of GO/DETA/MnFe2O4@SiO2 composite for MB was found to be 243.91 mg/g. The kinetic studies showed that the adsorption was pseudo first-order process. In addition, the thermodynamic studies indicated the adsorption was spontaneous and endothermic process.

Facile Synthesis of a Crystalline Zinc Sulfide/Chitosan Biopolymer Nanocomposite: Characterization and Application for Photocatalytic Degradation of Textile Dyes and Anticancer Activity

In the present study, we have synthesized a zinc sulfide/chitosan (ZS/CS) nanocomposite by utilizing simple, economical, and environmentally friendly methods. The synthesized nanomaterials were characterized by different analytical techniques such as XRD, FE-SEM, EDS, and FTIR to determine the phase structure, morphology, and elemental composition. FTIR spectroscopy was used to confirm the functional groups of the synthesized zinc sulfide (ZS) nanoparticles and ZS/CS composite. Besides, the optical properties of the as-synthesized nanocomposite was analyzed by a UV-visible spectrophotometer, and the estimated band gap energy is ∼3.03 eV. The photocatalytic efficiency of the synthesized ZS/CS nanocomposite was investigated against two textile dyes, Crystal Violet (CV) and Acid Red-I (AR-I), under UV-visible light irradiation. The nanocomposite showed excellent photocatalytic activity against the dyes, and photodegradation was estimated to be about 93.44 and 90.67% for CV and AR-I, respectively. The nanocomposite was reused for three consecutive cycles. The results revealed that the photocatalyst displayed good reusability during the photocatalytic decomposition and thus is considered a cost-effective and promising photocatalyst in degrading dye pollutants. The kinetic study proved that the pseudo-first-order reaction kinetics was followed by the degradation process. We also examined the anticancer activity of ZS and ZS/CS against human breast and myelogenous leukemia cancer cell lines, namely, MCF-7 and K-562, and the half minimal inhibitory concentrations were found to be less than 50 μg/mL.

Fabrication of next-generation multifunctional LBG-s-AgNPs@ g-C3N4 NS hybrid nanostructures for environmental applications

Toxic industrial wastes and microbial pathogens in water pose a continuous threat to aquatic life as well as alarming situations for humans. Developing advanced materials with an environmentally friendly approach is always preferable for heterogeneous visible light photocatalysis. As a green reducing tool, LBG-s-AgNPs@ g-C3N4 NS hybrid nanostructures were anchored onto graphitic carbon nitride (g-C3N4) using an environmentally friendly approach of anchoring/decorating AgNPs onto g-C3N4. With the help of advanced techniques, the fabricated hybrid nanostructures were characterized. Using a sheet like matrix of g-C3N4, nanosized and well-defined uniform AgNPs displayed good antibacterial activity as well as superior photodegradation of hazardous dyes, including methylene blue (MB) and Rhodamine B (RhB). Based on the disc diffusion method, three pathogenic microorganisms of clinical significance can be identified by showing the magnitude of their susceptibility. As a result, the following antimicrobial potency was obtained: E. coli ≥ M. luteus ≥ S. aureus. In this study, green synthesized (biogenic) AgNPs decorated with g-C3N4 were found to be more potent antimicrobials than traditional AgNPs. Under visible light irradiation, LBG-s-AgNPs@g-C3N4 NS (0.01 M) demonstrated superior photocatalytic performance: ∼100% RhB degradation and ∼99% of MB degradation in 160 min. LBG-s-AgNPs@g-C3N4 NS showed the highest kinetic rate, 3.44 × 10-2 min-1, which is 27.74 times for the control activity in case of MB dye. While in case of RhB dye LBG-s-AgNPs@g-C3N4 NS showed the highest kinetic rate, 2.26 × 10-2 min-1, which is 17.51 times for the control activity. Due to the surface plasmon resonance (SPR) and reduction in recombination of the electrons and holes generated during photocatalysis, anchoring AgNPs to g-C3N4 further enhanced the photocatalytic degradation of dyes. Using this photocatalyst, hazardous dyes can be efficiently and rapidly degraded, allowing it to be applied for wastewater treatment contaminated with dyes. It also showed remarkable antimicrobial activity towards Gram-ve/Gram + ve pathogens.

Photocatalytic removal of organic dye using green synthesized zinc oxide coupled cadmium tungstate nanocomposite under natural solar light irradiation

In this work, zinc oxide coupled cadmium tungstate (ZnO-CT) was prepared as a nano-photocatalyst through a green synthesis route using lemon leaf extract and characterized based on diverse microscopic and spectroscopic techniques. To explore the applicabilties of the prepared nanocomposite (NC), its photocatalytic activity has been investigated against Congo red (CR) dye under natural solar light irradiation conditions. ZnO- CT nano-photocatalyst showcases 97% photocatalytic degradation of the CR after 90 min of natural solar light irradiation with quantum yield of 1.16 × 10^-8 molecules photon^-1. The ZnO-CT NC has shown the enhanced photocatalytic degradation performance against CR when compared to its pristine forms (e.g., ZnO (70%) or CT (44%)). According to the free radical trapping and quenching experiments, the photocatalytic activity of ZnO-CT NC appears to be driven efficiently by superoxide and hydroxyl radicals. The photocatalytic degradation kinetics for CR dye was also studied using the pseudo-first-order, diffusional, and Singh models. The high photocatalytic activity of ZnO-CT NC can be accounted for by the presence of electron-withdrawing functional groups like acids (-COOH) and aldehydes (-CHO) on its surface which helped maintain the prolonged recombination of charge carriers and enhanced stability of ZnO-CT (with moderately low leaching rate of cadmium ions (∼2-5%)).

Renewable and eco-friendly ZnO immobilized onto dead sea sponge floating materials with dual practical aspects for enhanced photocatalysis and disinfection applications

In this study, we have investigated the role of natural dead sea sponge (DSS, Porifera) as a three-dimensional (3D) porous host substrate for the immobilization of nanostructured ZnO material towards the development of ZnO based floating photocatalysts for efficient removal of methylene blue (MB) dye under the illumination of sunlight. After photodegradation, the treated water after dye degradation contains several pathogens, different disinfectants or chemical reagents that are essentially used. This is not the case for DSS as it can naturally kill any pathogens during the wastewater treatment process. To explore these functions, ZnO nanosheets were incorporated onto DSS via hydrothermal protocol and the as prepared ZnO/DSS hybrid material exhibited approximately ∼100% degradation efficiency for the removal of MB. Importantly, the degradation kinetics associated with the fabricated ZnO/DSS was remarkably accelerated as evidenced by the high values of degradation reaction rate constants (3.35 × 10^-2min^-1). The outperformance of ZnO/DSS could be attributed to the adsorption caused by its 3D porous structure together with the high rapid oxidation of MB. Furthermore, the high charge separation of electron-hole pairs, natural porosity, and abundant catalytic sites offered by the hybrid ZnO/DSS floating photocatalyst have enabled quantitative (∼100%) degradation efficiency for MB. Finally, the excellent reusability results confirm the feasibility of using natural ZnO/DSS-based photocatalyst for practical solution of wastewater treatment and other environmental problems.

Fundamentals and comprehensive insights on pulsed laser synthesis of advanced materials for diverse photo- and electrocatalytic applications

The global energy crisis is increasing the demand for innovative materials with high purity and functionality for the development of clean energy production and storage. The development of novel photo- and electrocatalysts significantly depends on synthetic techniques that facilitate the production of tailored advanced nanomaterials. The emerging use of pulsed laser in liquid synthesis has attracted immense interest as an effective synthetic technology with several advantages over conventional chemical and physical synthetic routes, including the fine-tuning of size, composition, surface, and crystalline structures, and defect densities and is associated with the catalytic, electronic, thermal, optical, and mechanical properties of the produced nanomaterials. Herein, we present an overview of the fundamental understanding and importance of the pulsed laser process, namely various roles and mechanisms involved in the production of various types of nanomaterials, such as metal nanoparticles, oxides, non-oxides, and carbon-based materials. We mainly cover the advancement of photo- and electrocatalytic nanomaterials via pulsed laser-assisted technologies with detailed mechanistic insights and structural optimization along with effective catalytic performances in various energy and environmental remediation processes. Finally, the future directions and challenges of pulsed laser techniques are briefly underlined. This review can exert practical guidance for the future design and fabrication of innovative pulsed laser-induced nanomaterials with fascinating properties for advanced catalysis applications.

Photocatalytic Degradation of Orange G Dye by Using Bismuth Molybdate: Photocatalysis Optimization and Modeling via Definitive Screening Designs

In the current study, Bismuth molybdate was synthesized using simple co-precipitation procedure, and their characterization was carried out by various methods such as FT-IR, SEM, and P-XRD. Furthermore, the photocatalytic degradation of Orange G (ORG) dye using synthesized catalyst under visible light irradiation was studied. Response surface Method was used for the optimization of process variables and degradation kinetics evaluated by modeling of experimental data. Based on the experimental design outcomes, the first-order model was proven as a practical correlation between selected factors and response. Further ANOVA analysis has revealed that only two out of six factors have a significant effect on ORG degradation, however ORG concentration and irradiation time indicated the significant effects sequentially. Maximum ORG degradation of approximately 96% was achieved by keeping process parameters in range, such as 1 g L-1 loading of catalyst, 50 mg L-1 concentration of ORG, 1.4 mol L-1 concentration of H2O2 at pH 7 and a temperature of 30 °C. Kinetics of ORG degradation followed the pseudo first order, and almost complete degradation was achieved within 8 h. The effectiveness of the Bi2MoO6/H2O2 photo-Fenton system in degradation reactions is due to the higher number of photo-generated e- available on the catalyst surface as a result of their ability to inhibit recombination of e- and h+ pair.

The Photocatalytic Performance of Ag-Decorated SiO2 Nanoparticles (NPs) and Binding Ability between Ag NPs and Modifiers

This study demonstrates a method for synthesizing Ag-decorated SiO2 NPs, which combined surface modification and electroless plating. The binding ability between the Ag NPs and modifiers was also investigated for the first time. The resulting products were characterized by electron microscopy and a UV–Visible spectrophotometer, which confirmed that OH− modified composite has the most uniform coating of Ag NPs and the largest Ag elemental composition. The efficiency of degrading methylene blue (MB) under visible light for 60 min was above 99%. The normalized reaction constant also confirmed the experimental results. In brief, this study verifies an optimal surface modifier of the binding ability with Ag NPs and the feasibility of this structure to effectively absorb the solar spectrum and further apply it to the photodegradation reaction.

Recent advances in Cu2O-based composites for photocatalysis: a review

Cu₂O-based composites for photocatalysis have been extensively explored owing to their promising application in solving environmental and energy problems. At present, the research on photocatalysis is focused on improving the photocatalytic performance of materials. It has been reported that adjusting the morphology and size of Cu₂O can effectively improve its photocatalytic property. However, photocorrosion is still an inevitable problem, which hinders the application of Cu₂O in photocatalysis. The strategies of constructing heterogeneous nanostructures and ion doping can significantly improve the light stability, light absorption capacity and separation efficiency of electron-hole pairs. Cu₂O-based composites exhibit superior performances in degrading organic matter, producing hydrogen, reducing CO₂ and sterilization. Therefore, the construction of multi-materials will be one of the future directions in their photocatalytic application. This review summarizes the recent strategies for enhancing the photocatalytic activity of Cu₂O by analyzing different Cu₂O-based photocatalysts, and the charge transfer pathway is further discussed in detail. Finally, several opportunities and challenges in the field of photocatalysis are illustrated.

Facile One-Pot Biogenic Synthesis of Cu-Co-Ni Trimetallic Nanoparticles for Enhanced Photocatalytic Dye Degradation

Biomolecules from plant extracts have gained significant interest in the synthesis of nanoparticles owing to their sustainable properties, cost efficiency, and environmental wellbeing. An eco-friendly and facile method has been developed to prepare Cu-Co-Ni trimetallic nanoparticles with simultaneous bio-reduction of Cu-Co-Ni metal precursors by aqueous extract of oregano (Origanum vulgare) leaves. Dramatic changes in physicochemical properties of trimetallic nanoparticles occur due to synergistic interactions between individual metal precursors, which in turn outclass the properties of corresponding monometallic nanoparticles in various aspects. The as biosynthesized Cu-Co-Ni trimetallic nanoparticles were initially analyzed using ultraviolet (UV)–visible spectroscopy. The morphology, structure, shape, and size of biosynthesized trimetallic nanoparticles were confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) spectroscopy. The elemental analysis was carried out by energy-dispersive X-ray (EDX) spectroscopy. Fourier transform infrared (FTIR) microscopy was carried out to explain the critical role of the biomolecules in the Origanum vulgare leaf extract as capping and stabilizing agents in the nanoparticle formation. Additionally, simultaneous thermogravimetric analysis (TGA) and differential thermogravimetry (DTG) analysis was also performed to estimate the mass evaluation and rate of the material weight changes. The photocatalytic activity of as biosynthesized trimetallic nanoparticles was investigated towards methylene blue (MB) dye degradation and was found to be an efficient photocatalyst for dye degradation. Kinetic experiments have shown that photocatalytic degradation of MB dye followed pseudo-first-order kinetics. The mechanism of the photodegradation process of biogenic Cu-Co-Ni trimetallic nanoparticles was also addressed.

Precursor- and Time-Dependent Morphological Evolution of ZnO Nanostructures for Comparative Photocatalytic Activity and Adsorption Dynamics with Methylene Blue Dye

Diverse ZnO nanostructures were successfully fabricated at 700 °C by direct annealing of 1D Zn(II) coordination polymer precursors, namely, [Zn2(bpma)2(adc)2] n , [Zn2(bpea)2(adc)2] n , and {[Zn2(bpta)2(adc)2]·2H2O} n . The effect of sacrificial ligands present in the precursors as well as a variation in the retention time (6-24 h) during their synthesis resulted in 0D nanospheres, 1D microrods, and 3D polyhedra (with a diamond-like structure) of ZnO. The as-synthesized ZnO nanostructures were characterized by field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffractometry, diffuse reflectance spectroscopy, and Raman spectroscopy. The hexagonal crystal structure was confirmed for all the ZnO samples. A lattice spacing of 0.22 nm has been observed for nanospheres, whereas a lattice spacing of 0.26 nm has been observed for the polyhedra. Their Raman spectra confirm the wurtzite phase of ZnO. UV-vis spectra of ZnO nanostructures exhibit broad peaks in the range of 350-370 nm, and the band gap energies are found to be in the range of 3.02-3.20 eV. Based on the photoluminescence spectra photocatalytic activities of the as-synthesized ZnO nanostructures calcined for 12 h were tested with methylene blue (MB) as a contaminant in an aqueous solution. These results demonstrate that the photocatalytic efficiency of polyhedra is higher than those of nanospheres and microrods. The adsorption kinetics of MB dye by these nanostructures were studied by three different kinetic models-Elovich's, intraparticle, and pseudo-second-order. The maximum rate of adsorption was observed with the intraparticle diffusion model.

Investigation of the photocatalytic potential enhancement of silica monolith decorated tin oxide nanoparticles through experimental and theoretical studies

Photodegradation of organic pollutants is considered to be the most suitable and cheaper technique to counter decontamination issues.

Removal of methylene blue dye by solvothermally reduced graphene oxide: a metal-free adsorption and photodegradation method

In this work, reduced graphene oxide (rGO) was fabricated at different reduction temperatures via an environmentally friendly solvothermal approach. The rGO formed at 160 °C clearly showed the partial restoration of the sp² hybridization brought about by the elimination of oxygenated functionalities from the surface. Owing to the augmented surface area and the band gap reduction, rGO-160 exhibited the best adsorption (29.26%) and photocatalytic activity (32.68%) towards the removal of MB dye. The effects of catalyst loading, initial concentration of dye, light intensity, and initial pH of solution were evaluated. It was demonstrated that rGO-160 could achieve a higher adsorptive removal (87.39%) and photocatalytic degradation (98.57%) of MB dye when 60 mg of catalyst, 50 ppm of dye at pH 11, and 60 W m⁻² of UV-C light source were used. The MB photodegradation activity of rGO-160 displayed no obvious decrease after five successive cycles. This study provides a potential metal-free adsorbent-cum-photocatalyst for the decontamination of dyes from wastewater.

A metal-free MB dye removal process was carried out by solvothermally synthesized rGO. After optimization, near-complete dye removal was achieved via an adsorption and UV photodegradation route.

Morphology dependent nonlinear optical and photocatalytic activity of anisotropic plasmonic silver

Anisotropic nanoparticles are ideal building blocks for a number of functional materials due to their exceptional and anisotropic optical, electronic, magnetic and mechanical properties. In this work we present systematic studies on morphology dependent ultra-sensitive thermal diffusivity and photodegradation capability of anisotropic plasmonic silver for the first time. Hydrogen peroxide centered synthesis was performed to prepare anisotropic silver nanosystems spherical (14 nm), quasi-spherical (17 nm), elliptical (18 m), rods (aspect ratio 2.1), hexagonal (22 nm) and prisms (19 nm). The synthesized nanosystems were characterized using UV-VIS spectroscopy, high resolution transmission electron microscopy (HRTEM) and band gap analysis. A dual beam mode matched thermal lensing method was adopted for evaluating the thermal diffusivity of the anisotropic system. The present anisotropic nanoparticle system exhibited strong morphology based thermal diffusivity. An increase of 140% in the thermal diffusivity value points to the nonlinear optical application potential of the anisotropic systems. Sunlight mediated photodegradation of methylene blue showed a promising increase in the degradation rate for anisotropic systems compared to other similar systems reported in the literature.

Photocatalytic Membranes in Photocatalytic Membrane Reactors

The present work gives a critical overview of the recent progresses and new perspectives in the field of photocatalytic membranes (PMs) in photocatalytic membrane reactors (PMRs), thus highlighting the main advantages and the still existing limitations for large scale applications in the perspective of a sustainable growth. The classification of the PMRs is mainly based on the location of the photocatalyst with respect to the membranes and distinguished in: (i) PMRs with photocatalyst solubilized or suspended in solution and (ii) PMRs with photocatalyst immobilized in/on a membrane (i.e., a PM). The main factors affecting the two types of PMRs are deeply discussed. A multidisciplinary approach for the progress of research in PMs and PMRs is presented starting from selected case studies. A special attention is dedicated to PMRs employing dispersed TiO2 confined in the reactor by a membrane for wastewater treatment. Moreover, the design and development of efficient photocatalytic membranes by the heterogenization of polyoxometalates in/on polymeric membranes is discussed for applications in environmental friendly advanced oxidation processes and fine chemical synthesis.