A simple Schiff base as dual-responsive fluorescent sensor for bioimaging recognition of Zn2+ and Al3+ in living cells

Colorimetric and Fluorometric N-Acylhydrazone-based Chemosensors for Detection of Single to Multiple Metal Ions: Design Strategies and Analytical Applications

The development of optical sensors for metal ions has gained significant attention due to their broad applications in biology, the environment, and medicine. Colorimetric and fluorometric detection methods are particularly valued for their simplicity, cost-effectiveness, high detection limits, and analytical power. Among various chemical probes, the hydrazone functional group stands out for its extensive study and utility, owing to its ease of synthesis and adaptability. This review provides a comprehensive overview of N-acylhydrazone-based probes, serving as highly effective colorimetric and fluorometric chemosensors for a diverse range of metal ions. Probes are categorized into single-ion, dual-ion, and multi-ion chemosensors, each further classified based on the detected metal(s). Additionally, the review discusses detection modes, detection limits, association constants, and spectroscopic measurements.

An easily synthesizable naphthalene-based sensing platform for Al3+ and Zn2+ ions: theoretical insights and live cells imaging

A new naphthalene-derived Schiff base probe, 1-((2-(diphenylphosphino)ethylimino)methyl)naphthalen-2-ol (HL), has been demonstrated for fluorometric detection of Al3+ and Zn2+ ions. HL was characterized by elemental analysis, FT-IR, NMR, UV-Vis, fluorescence, and ESI-MS analyses. It exhibited high sensitivity and selectivity toward Al3+ and Zn2+ ions in a semi-aqueous medium (CH3CN-H2O; 4 : 1, v/v), remaining unaffected by other competing metal ions. As a 'turn-on' fluorogenic probe, HL displayed strong emission enhancements at 430 nm and 450 nm (λex 300 nm) upon the addition of Al3+ and Zn2+ ions, respectively, with detection limits of 0.62 μM for Al3+ and 0.54 μM for Zn2+. The addition of Al3+ caused ca. 20 nm blue-shift in emission and absorption maxima of HL due to strong complex formation. The calculated binding constant values were found to be 1.39 × 103 M-1 and 4.78 × 103 M-1, respectively, for Al3+ and Zn2+ ions. Job's plot, NMR, ESI-MS, and density functional theory (DFT) studies supported the metal ion binding mechanism with 1 : 1 stoichiometry. Fluorescence imaging experiments further revealed HL's ability to detect intracellular Al3+ in live cells with very low cytotoxicity, highlighting its potential as a selective chemosensory probe.

A robust PET-based chiral Schiff base molecular probe for recognition of Hg2+ and Pb2+ and its application in live cell imaging

A new salen-based chiral Schiff base, 6,6'-((1E,1'E)-((1R,2R)-cyclohexane-1,2-diylbis(azanylylidene))bis(methanylylidene))bis(2,4-dibromophenol) (H2L) has been designed and synthesized. H2L is a fluorescent chemical sensor that can rapidly and precisely detect harmful heavy metal ions such as Hg2+ and Pb2+ with well-separated excitation and emission wavelengths. Single-crystal X-ray diffraction analysis confirmed the structure of H2L. The binding of Hg2+/Pb2+ causes a change in the emission behavior of H2L from weakly fluorescent to highly fluorescent through the CHEF effect and inhibits the PET process. H2L exhibited immense selectivity and tremendous sensitivity, with LOD values of 8.29 nM and 7.65 nM for Hg2+ and Pb2+, respectively. The 1 : 1 binding mode of H2L·Hg2+ and H2L·Pb2+ is validated by using Job's plot, 1H NMR titration, and ESI-MS investigations. In addition, H2L has been used to detect Hg2+/Pb2+ ions in real water samples and paper strips, and intracellularly in HeLa cells.

Salicylidene-based dual-responsive 'turn on' fluorometric chemosensors for the selective detection of Zn2+, Al3+ and F- ions: theoretical investigation and applications in the live cell imaging of zebrafish larvae and molecular logic gate operation

Four salicylidene-based dual-responsive chemosensors 1,5-bis(5-bromosalicylaldehyde)carbohydrazone (R1), 1,5-bis(5-bromosalicylaldehyde)thiocarbohydrazone (R2), 1,5-bis(3-ethoxysalicylaldehyde)carbohydrazone (R3) and 1,5-bis(3-ethoxysalicylaldehyde)thiocarbohydrazone (R4) were synthesized and characterized. The molecular structures of R1 and R3 were confirmed by single crystal X-ray diffraction technique, which crystallized in the orthorhombic Pbcn and monoclinic P21/n space groups, respectively. The chemosensor molecules were investigated for their recognition properties against the selected cations (K+, Ca2+, Mn2+, Co2+, Ni2+, Cu2+, Zn2+, Fe3+ and Al3+) and anions (F-, Cl-, Br-, I-, HSO4-, H2PO4-, ClO4-, N3- and NO3-) by colorimetry, absorption spectroscopy, fluorescence spectroscopy, 1H NMR spectroscopy and theoretical studies. The sensor molecules showed colorimetric responses for the Co2+, Ni2+, Cu2+ and Fe3+ cations and the F- anion. Interestingly, the Zn2+ and Al3+ cations showed only the 'turn on' fluorometric response, whereas the F- anion showed both colorimetric and fluorometric responses. The binding constants were determined using the Benesi-Hildebrand (B-H) equation from the fluorescence titrations and found to be higher for R3 towards the Al3+ cation (2.03 × 106 M-1) with a low limit of detection (1.79 μM) and for R4 towards the F- anion (5.13 × 105 M-1) with a low limit of detection (5.23 μM). The chemosensors established 1 : 2 and 1 : 1 binding stoichiometries with the sensed cations and anion, respectively, as confirmed by Job's plots. The computational studies show a lower band gap of HOMO-LUMO when the chemosensors bind with the sensed inorganic ions compared to the free chemosensors. Furthermore, the observed fluorescent behaviour of the Zn2+ and Al3+ cations have motivated us to investigate the practical applications in the live cell-imaging of zebrafish larvae as well as in the development of a molecular logic gate.

Organoplatinum Complex Exhibiting Aggregation-Enhanced Emission (AEE) and Dual-Channel Ion-Sensing Properties by Terminating the Molecular Configuration Transformation (MCT) and Excited-State Intramolecular Proton Transfer (ESIPT)

Emitters produce weak emissions when they undergo structural changes such as molecular configuration transformation (MCT) or excited-state intramolecular proton transfer (ESIPT) but give out strong emissions after terminating these distortions. Herein, an organoplatinum complex, Pt-ppy-ABP, carrying a salicylaldehyde-based Schiff base unit is synthesized. It exhibits weak emission in dilute solutions but shows bright emission at the aggregated state or after interacting with F- and Zn2+. This suggests that it has an aggregation-enhanced emission (AEE) property and holds potential in ion detection. Supported by theoretical calculations and femtosecond transient absorption results, this complex suffers excited-state structural changes including MCT from a square-planar configuration to a tetrahedral one, as well as intramolecular rotation of a monodentate ligand and ESIPT, showing weak emission in its solutions. At the aggregated state, it releases strong yellow emissions because of the restraints of MCT and ligand rotation. Upon interacting with F- or Zn2+, it emits bright-red or -green emissions, achieving detection limits of 10-7 M. The sensing mechanism is concluded as deprotonation- and coordination-induced ESIPT terminations, respectively. Given its AEE property and ion-responsive emissions, its application in information encryption is also explored. Finally, these findings should provide valuable clues for the developments of chemosensors with dual-channel recognition abilities.

Development and Validation of a Fluorogenic Probe for Lysosomal Zinc Release

Zinc homeostasis, which allows optimal zinc utilization in diverse life processes, is responsible for the general well-being of human beings. This paper describes developing and validating an easily accessible indole-containing zinc-specific probe in the cellular milieu. The probe was synthesized from readily available starting materials and was subjected to steady-state fluorescence studies. It showed selective sensing behavior towards Zn2+ with reversible binding. The suppression of PET (Photoinduced Electron Transfer) and ESIPT (Excited State Intramolecular Proton Transfer) elicited selectivity, and the detection limit was 0.63 μM (LOQ 6.8 μM). The zinc sensing capability of the probe was also screened in the presence of low molecular weight ligands [LMWLs] and showed interference only with GSH and ATP. It is non-toxic and can detect zinc in different cell lines under various stress conditions such as inflammation, hyperglycemia, and apoptosis. The probe could stain the early and late stages of apoptosis in PAN-2 cells by monitoring the zinc release. Most experiments were conducted without external zinc supplementation, showing its innate ability to detect zinc.

An ultra-sensitive fluorescent probe for recognition of aluminum ions and its application in environment, food, and living organisms

The concentration of aluminum ions (Al3+) is closely related to the ecological environment, food safety, and human health, with excessive accumulation of Al3+ causing irreversible damage to both the ecological balance and human health. Therefore, a fluorescent probe ABHS, based on aminobenzoylhydrazide Schiff-base, was designed and synthesized in one step with a high yield. ABHS can form a 1:1 coordination complex with Al3+ in a pure water system. It exhibits ultra-sensitive and accurate detection of Al3+ even at low concentration of Al3+, with the detection limit of 6.7 nM. Furthermore, ABHS demonstrated significant enhancement of specific fluorescence for Al3+, with rapid response speed, good stability, and robust resistance to interference. Importantly, ABHS has shown excellent detection and imaging capabilities even in complex real environmental samples, food samples, and living organisms.

A quinoline derived Schiff base as highly selective 'turn-on' probe for fluorogenic recognition of Al3+ ion

A quinoline-derived Schiff base QnSb has been synthesized for fluorescent and colorimetric recognition of Al3+ ions in a semi-aqueous medium. The compound QnSb has been characterized by elemental analysis, FT-IR, 1H/13C NMR, UV-Vis and fluorescence spectral techniques. The crystal structure of the QnSb was confirmed by single crystal X-ray diffraction (SC-XRD) analysis. Notably, almost non-fluorescent QnSb served as a 'turn on' responsive probe for Al3+ by inducing a remarkable fluorescence enhancement at 422 nm when excited at 310 nm. The probe QnSb exhibited high selectivity for Al3+ in CH3CN/H2O (4:1, v/v) solution over several competing metal ions (e.g., Mg2+, Pb2+, Zn2+, Cd2+, Co2+, Cu2+, Ca2+, Ni2+, Fe3+/2+, Cr3+, Mn2+, Sn2+, and Hg2+). The limit of detection (LoD) was computed as low as 15.8 nM which is significantly lower than the permissible limit set by WHO for Al3+ ions in drinking water. A 1:1 binding stoichiometry of complex QnSb-Al3+ was established with the help of Job's plot, ESI-MS, NMR and DFT analyses. Based on its remarkable sensing ability, the probe QnSb was utilized to establish molecular logic gates, and the fluorescence detection of Al3+ could clearly be demonstrated on the filter paper test strips.

Turn-on detection of Al3+ and Zn2+ ions by a NSN donor probe: reversibility, logic gates and DFT calculations

An efficient dual functional naphthalene-derived Schiff base NpSb probe has been synthesised and evaluated for its fluorescence and chromogenic response towards metal ions. The NpSb probe was capable of selectively recognising Al3+ and Zn2+ ions when they were excited at the same wavelength in an aqueous organic solvent system. Almost non-fluorescent NpSb displayed a 'turn-on' fluorescence response when treated with Zn2+ (λem = 416 nm) and Al3+ (λem = 469 nm) ions due to the chelation-enhanced fluorescence (CHEF) effect. The limit of detection (LoD) values for Al3+ and Zn2+ have been determined to be 38.0 nM and 43.0 nM, respectively. The binding constants for Al3+ and Zn2+ were found to be 1.18 × 106 M-1 and 3.5 × 105 M-1, respectively. The NpSb also acted as a colorimetric sensor for Al3+ as the colour of the probe's solution turned to pale green from colourless upon Al3+ addition. The binding mechanism between NpSb and Zn2+/Al3+ was supported by the ESI-MS, Job's plot, NMR, and DFT studies. The reversibility experiments were carried out with an F- ion and EDTA with the development of corresponding logic gates. Moreover, NpSb could be applied to detect Al3+ ions in real samples such as tap water, distilled water and soil samples.

Diphenyl imidazole-based fluorescent chemosensor for Al3+ and its Al3+ complex toward water detection in food products

A sophisticated fluorescent chemosensor, 2-(4-nitrophenyl)-4,5-diphenyl-1H-imidazole (NPDI), was designed and synthesized through a one-step condensation reaction. NPDI exhibited a fluorescence enhancement response toward Al3+, accompanied by significant emission color change without interference from other tested metal ions. The binding stoichiometry and mechanism was corroborated using various techniques. The limit of detection (LOD) for Al3+ could reach 7.25 × 10-8 mol/L and the binding constant was found to be 1.47 × 105 L/mol. Furthermore, the in-situ formed NPDI·Al complex functioned a secondary chemosensor for water by quenching effect. The fluorescence quenching mechanism could be attributed to hydrogen bonding interaction of nitro substituent with water. The LOD was calculated to be 0.012 %, indicating NPDI·Al heightened sensitivity to water. Additionally, NPDI·Al complex was employed for the moisture detection in the surroundings. Finally, the practical application of NPDI·Al complex had been successfully used in the determination of water content in food products.

A Simple Schiff Base Probe for Quintuplicate-Metal Analytes with Four Emission-Wavelength Responses

A versatile mono-Schiff compound consisting of o-aminobenzene-hydroxyjulolidine (ABJ-MS) has been easily synthesized using a one-step reaction. ABJ-MS displays four diverse fluorescence responses to the addition of Zn2+/Al3+/Fe3+/Ag+, with the maximum fluorescence emission at 530 nm undergoing a hypsochromic shift to 502/490/440/430 nm, synchronously with the discriminating fluorescence enhancement being 10.6/22.8/2.6/7.1-fold, respectively. However, the addition of Cu2+ into ABJ-MS leads to an opposite behavior, namely, fluorescence quenching. Meanwhile, ABJ-MS also displays distinct absorption changes after adding these five metal ions due to different binding affinities between them and ABJ-MS, which gives ABJ-MS quite a versatile detecting nature for Cu2+/Zn2+/Al3+/Fe3+/Ag+. Moreover, ABJ-MS can mimic a series of versatile AND/OR/INH-consisting logic circuits on the basis of the Cu2+/Zn2+/Al3+/Fe3+/Ag+-mediated diverse optical responses. These will endow the smart ABJ-MS molecule and potential applications in the multi-analysis chemosensory and molecular logic material fields.

A simple AIE chemosensor based on diphenyl imidazole scaffold for 2,4,6-trinitrophenol detection and dye absorption

Fluorescent material exhibiting aggregation-induced emission (AIE) has demonstrated to be a facile and effective method to detect 2,4,6-trinitrophenol (TNP) due to its excellent features. In this study, a novel diphenyl imidazole-based fluorescent material (DINP) was successfully synthesized via a facile method. Fluorescence spectra showed that DINP had a typical AIE effect in DMSO/water solution, and the fluorescence emission was effectively quenched by TNP without being affected by other explosives. The Stern-Volmer quenching constant of 2.70 × 10⁵ M^-1 and detection limit of 7.2 × 10^-8 M demonstrated that the DINP aggregates could serve as potential chemosensor for TNP detection. The mechanism behind the quenching of fluorescence could be ascribed to the formation of ground state complex. In addition, fluorescent test strips and TLC plate prepared with the aggregates provided an easy and low cost method for TNP detection in the aqueous solution. Especially, DINP was applied to quantitatively detect the content of TNP in real water samples. Furthermore, the aggregates exhibited good selective adsorptive performance to rhodamine B dye in aqueous solution with high adsorption efficiency of 98 % in a few minutes.

Exploring the Photophysics of a Zn2+ Fluorescence Sensor and Its Sensing Mechanism

Sensor X is a turn-on sensor, which is applied in the fluorescence detection of Zn²⁺ ions. Its photophysical process is comprehensively investigated to clarify its weak fluorescence. With the aid of density functional theory (DFT) and time-dependent density functional theory (TDDFT), the potential energy surfaces (PES) of X on both ground and first excited states are studied. Excited-state intramolecular proton transfer (EPT) processes as well as molecule twisting motion are observed, which induces several minima on the excited-state PES. Transition states as well as rate constants for these dynamic processes are obtained to evaluate their occurrences. The twisting motion of the sensor is an ultrafast process, which is initiated by a specific EPT process and leads to a nonemissive twisted intramolecular charge transfer (TICT) state. The fluorescence of the sensor is barely observable because of the easily attainable TICT state on the excited PES. This mechanism is trustworthy and intrinsically different from the previously proposed mechanism. After clarifying the photophysical process of the sensor, the Zn²⁺ sensing mechanism is uncovered. Also, the selectivity against Cd²⁺ and Hg²⁺ is fully discussed.

A simple hydrazone probe for recognition of Al3+ and PPi and its applicability in lysosomal imaging

A simple hydrazone probe (1) was designed and synthesized for the successive detection of Al³⁺ and pyrophosphate (PPi) in almost 100% buffer environment. The probe provided O₂N donor set for chelation with Al³⁺, leading to a distinct fluorescence boost at 510 nm. The in-situ formed 1-Al³⁺ complex detected PPi with an "on-off" behavior. The detection limits for Al³⁺ and PPi were 35.7 nM and 76 nM, respectively. Benefiting from the existence of morpholine as lysosome-targeting group, probe 1 was successfully applied to the detection of Al³⁺ and PPi in lysosomes.

A chromone-based multi-selective sensor: applications in paper strips and real sample

A chromone-based multi-selective sensor: applications in a paper strip and real sample.

An AIRE-active far-red ratiometric fluorescent chemosensor for specifically sensing Zn2+ and resultant Zn2+ complex for subsequent pyrophosphate detection in almost pure aqueous media

A simple Schiff-base fluorescent chemosensor (1) was synthesized by the reaction of 3-amino-pyrazine-2-carbohydrazide and 7-diethylamino-3-formylcoumarin; the sensor 1 displayed a notable green emission at 524 nm in DMSO and an aggregation-induced ratiometric emission (AIRE) at 555 nm in an almost buffered aqueous media (0.5% DMSO content). The AIRE of 1 was quenched following binding to Zn²⁺ ions, while the fluorescence emission in the far-red region was evidently enhanced at 628 nm. Notably, the ratiometric signal output could be utilized to specifically distinguish Zn²⁺ among various metal ions. Moreover, the 1-Zn²⁺ complex was effectively employed as a fluorescent ratiometric chemosensor for pyrophosphate (PPi) detection. The detection limit was 3.52 μM and 2.45 μM for Zn²⁺ and PPi, respectively. The binding mechanism was evaluated by ¹H NMR, ESI-MS, single-crystal X-ray diffraction, TEM, time-resolved fluorescence spectrophotometry, and density functional theory studies. Overall, owing to its sensitive fluorescence behavior, cell imaging studies demonstrated that this sensor is capable of sensing Zn²⁺ and PPi in living cells.

A Novel Schiff Base-Modified Dialdehyde Cellulose-Based Fluorescent Probe for Al3+ and Its Application in Environmental Analysis

Cellulose is the most abundant natural polymer with good biodegradability and biocompatibility. In this paper, a novel fluorescent probe DAC-SD-NA for aluminum (Al³⁺ ) detection is successfully synthesized based on dialdehyde cellulose (DAC). DAC-SD-NA exhibited a remarkable "turn-on" fluorescence response to Al³⁺ in a wide pH range, and the fluorescence color of DAC-SD-NA solution turned from colorless to bright blue at the presence of Al³⁺ . The detection limit for Al³⁺ is computed to be 6.06×10^-7 m. The reaction mechanism of DAC-SD-NA towards Al³⁺ is confirmed by Job's plot, X-ray photoelectron spectroscopy, and density functional theory (DFT) calculations. In view of DAC-SD-NA exhibited good sensitivity and selectivity, it is applied to detect Al³⁺ in real water. What's more, DAC-SD-NA-loaded fluorescent hydrogel can serve as a convenient tool for the detection of Al³⁺ .

A Simple Turn-off Schiff Base Fluorescent Sensor for Copper (II) Ion and Its Application in Water Analysis

An aniline-functionalized naphthalene dialdehyde Schiff base fluorescent probe L with aggregation-induced enhanced emission (AIEE) characteristics was synthesized via a simple one-step condensation reaction and exhibited excellent sensitivity and selectivity towards copper(II) ions in aqueous media with a fluorescence " turn-off " phenomenon. The detection limit of the probe is 1.64 × 10^-8 mol·L^-1. Furthermore, according to the results of the UV-vis/fluorescence titrations, Job's plot method and ¹H-NMR titrations, a 1:2 stoichiometry was identified. The binding constant between L and Cu²⁺ was calculated to be K_a = 1.222 × 10³. In addition, the AIEE fluorescent probe L could be applied to detection in real water samples with satisfactory recoveries in the range 99.10-102.90% in lake water and 98.49-102.37% in tap water.

FRET based ratiometric switch for selective sensing of Al3+ with bio-imaging in human peripheral blood mononuclear cells

FRET based ratiometric switch for selective sensing of Al³⁺ with bio-imaging in human peripheral blood mononuclear cells (PBMCs).

Multifunctional rhodamine B appended ROMP derived fluorescent probe detects Al3+ and selectively labels lysosomes in live cells

There a few reports of rhodamine-based fluorescent sensors for selective detection of only Al3+, due to the challenge of identifying a suitable ligand for binding Al3+ ion. The use of fluorophore moieties appended to a polymer backbone for sensing applications is far from mature. Here, we report a new fluorescent probe/monomer 4 and its ROMP derived polymer P for specific detection of Al3+ ions. Both monomer 4 and its polymer P exhibit high selectivity toward only Al3+ with no interference from other metal ions, having a limit detection of 0.5 and 2.1 µM, respectively. The reversible recognition of monomer 4 and P for Al3+ was also proved in presence of Na2EDTA by both UV-Vis and fluorometric titration. The experimental data indicates the behavior of 4 and P toward Al3+ is pH independent in medium conditions. In addition, the switch-on luminescence response of 4 at acidic pH (0 < 5.0), allowed us to specifically stain lysosomes (pH ~ 4.5-5.0) in live cells.

A Review on Schiff Base Fluorescent Chemosensors for Cell Imaging Applications

Fluorescent determinations of analytes have proven to be a powerful method due to their simplicity, low cost, detection limit, rapid photoluminescence response, and applicability to bioimaging. Fluorescence imaging as a powerful tool for monitoring biomolecules within the living systems. Schiff base has been extensively used as strongly absorbing and colorful chromophores in the design of chemosensors. In recent years, Schiff base based fluorescent probes have been developed for the detection of various toxic analytes and imaging of various analytes in biological systems. This review gives an overview of the important fluorescent sensors which are based on Schiff base, their approaches for molecular recognition, and their potential application in bioimaging studies.

Quinoline-based hydrazone for colorimetric detection of Co2+ and fluorescence turn-on response of Zn2

A quinoline-based hydrazone, namely, bis((quinolin-8-yl)methylene)carbonohydrazide (1), has been designed and synthesized, which could be used as a dual probe for selective recognition of Co²⁺ and Zn²⁺ by monitoring changes in absorption and fluorescence spectral pattern, respectively. The detection limits of 1 for these two ions are 0.21 and 0.66 μM, respectively. The complex formation between 1 and Co²⁺/Zn²⁺ is responsible for the detection process, as confirmed through several spectral methods and DFT calculations. The application of the as-synthesized sensor is demonstrated in Zn²⁺ imaging in living cells.