Portable SERS-Based POCT Kit for Ultrafast and Sensitive Determining Paraquat in Human Gastric Juice and Urine

Paraquat (PQ) poisoning poses a significant public health concern. Unfortunately, point-of-care testing (POCT) of PQ in biofluids remains challenging. This study developed a portable kit that enables swift and reliable identification and quantification of PQ in human urine and gastric juice. The approach employed the surface-enhanced Raman scattering (SERS) technique, leveraging gold-silver core-shell nanoparticles (Au@Ag NPs) as the substrate. The kit comprised a portable Raman spectrometer and three sealed tubes containing Au@Ag NPs colloid, KI solution, and MgSO4 solution. A discernible correlation was observed between signal intensity and the logarithmic concentration, spanning from 5 to 500 μg/L in urine and 10 μg/L to 1 mg/L in gastric juice. The detection limits, calculated from the characteristic peak at 1648 cm -1, were 1.36 and 4.05 μg/L in human urine and gastric juice, respectively. Notably, this POCT kit obviated the need for pretreatment procedures, and the detection process was accomplished within 1 min, yielding satisfactory recoveries. This expeditious time frame is crucial for clinical diagnosis and rescue operations. Compared to conventional methods, this kit demonstrated real-time determinations in nonlaboratory settings. The simplicity and practicality of this POCT assay suggest its significant potential as an innovative alternative for poisoning detection applications.

Localized surface plasmon resonance shift of biosynthesized and functionalized quasi-spherical gold nanoparticle systems

Rapid and more environment-friendly means of gold nanoparticle synthesis is necessary in many applications, as in ion detection. Leaf extracts have become effective and economical reducing agents for gold nanoparticle formation, however, effects of extract combinations have not been thoroughly investigated. With the exploitation of combined extract effects, gold nanoparticles were synthesized then functionalized and investigated to produce selected nanoparticle systems which are capable of detecting aqueous lead(ii) ions with minimum detection limits of 10-11 ppm. The measured localized surface plasmon resonance absorption peaks of the gold nanoparticles were 541-800 nm for the synthesis and 549 nm for the functionalization. The diameters of different gold nanoparticle systems were 17-37 nm. These were mostly quasi-spherical in morphology with some rod-, triangular-, and hexagonal plate-like particles. The biosynthesis used polyphenols and acids present in the extracts in the reduction of gold ions into gold nanoparticles, and in the nanoparticle capping and stabilization. Functionalization replaced the capping compounds with alliin, S-allylcysteine, allicin, and ajoene. Gold nanoparticle stability in aqueous systems was verified for two weeks up to five months. The investigations concluded the practicability of the gold nanoparticles in lead(ii) ion detection with selectivity initially verified for other divalent cations.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Rapid and Robust Analysis of Coumatetralyl in Environmental Water and Human Urine Using a Portable Raman Spectrometer

The widespread use and exposure of coumatetralyl (CMTT) has led to its accumulation in the environment and organisms, causing damage to ecosystems and adverse health effects in humans. Unfortunately, achieving fast detection of CMTT remains challenging. Herein, a rapid and robust surface-enhanced Raman spectroscopy (SERS) method was developed for rapid on-site detection of CMTT in environmental water and human urine. Clear trends were observed between the signal intensity and the logarithmic concentration of CMTT, ranging from 0.025 to 5.0 μg/mL with high reproducibility. The detection limits in water and human urine were as low as 1.53 and 13.71 ng/mL, respectively. The recoveries of CMTT for environmental water and urine samples were 90.2-98.2 and 82.0-87.5%, respectively, satisfactory for practical applications. The quantitative results of this approach were highly comparable to those obtained by high-performance liquid chromatography. Most importantly, it is cost-effective, operationally simple, and without a complicated sample preparation step. Detecting CMTT in water samples took only 5 min, and the detection of urine samples was completed within 8 min. This simple yet practical SERS approach offers a reliable application prospect for on-site CMTT detection in environmental water and point-of-care monitoring of poisoned patients.

Rapid identification and quantification of diquat in biological fluids within 30 s using a portable Raman spectrometer

Rapid detection of diquat (DQ) is essential in clinical diagnosis and rescue. Here, we developed a fast, simple-yet-practical detection strategy for the reliable identification and quantification of DQ in biological fluids. Based on surface-enhanced Raman spectroscopy (SERS), point-of-care detection was realized under the acidic condition with gold nanoparticles as the substrate. Under optimal experimental conditions, the detection limits of the strategy were 17.5 ppb and 1.99 ppm in human urine and gastric juice, respectively. High specificity and selectivity of the SERS strategy were demonstrated using common pesticides and coexisting biological substances. The method was also used to detect biofluids from 5 patients and urine samples from 10 healthy volunteers. The results were in high agreement with spectrophotometric and clinical liquid chromatography-mass spectrometry methods. The volume of urine samples required for this technique is merely 20 μL, and no preparation of the samples is required. Compared to traditional methods used in clinical settings, SERS-based methods are capable of real-time measurements that accurately provide rapid detection and response in non-laboratory settings, with great potential for on-site and point-of-care testing.

Rapid Quantitative Detection of Voriconazole in Human Plasma Using Surface-Enhanced Raman Scattering

There is an increasing demand for rapid detection techniques for monitoring the therapeutic concentration of voriconazole (VRC) in human biological fluids. Herein, a rapid and selective surface-enhanced Raman scatting method for point-of-care determination of VRC in human plasma was developed via a portable Raman spectrometer. This approach has enabled the quantification of the VRC spiked into human plasma at clinical relevant concentrations. A gold nanoparticle solution (Au sol) was used as the SERS substrate, and the agglomerating conditions on its sensitivity were optimized. The method involves the formation of hot spots, and the signal of VRC molecules adsorbed on the surface of the SERS hot spot was amplified by 10⁵. The calibration curve was linear in the range of 0.02-10 ppm, with satisfactory repeatability. The limit of detection was as low as 12.3 ppb. The variation in VRC spectra over time on different substrates demonstrated good reproducibility. Notably, the salting-out extraction method developed in this study was rapid and suitable for the quantitation of drugs in biological samples. Compared with traditional methods, this approach allows for the point-of-care quantification of VRC directly in a complex matrix, which may open up new exciting opportunities for future use of the SERS technique in clinical applications.

Effect of Supporting Background Electrolytes on the Nanostructure Morphologies and Electrochemical Behaviors of Electrodeposited Gold Nanoparticles on Glassy Carbon Electrode Surfaces

Electrodeposition is an electrochemical method employed to deposit stable and robust gold nanoparticles (AuNPs) on electrode surfaces for creating chemically modified electrodes (CMEs). The use of several electrodeposition techniques with different experimental parameters allow in obtaining various surface morphologies of AuNPs deposited on the electrode surface. By considering the electrodeposition of AuNPs in various background electrolytes could play an important strategy in finding the most suitable formation of the electrodeposited AuNP films on the electrode surface. This is because different electrode roughnesses can have different effects on the electrochemical activities of the modified electrodes. Thus, in this study, the electrodeposition of AuNPs onto the glassy carbon (GC) electrode surfaces in various aqueous neutral and acidic electrolytes was achieved by using the cyclic voltammetry (CV) technique with no adjustable CV parameters. Then, surface morphologies and electrochemical activities of the electrodeposited AuNPs were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), CV, and electrochemical impedance spectroscopy (EIS). The obtained SEM and 3D-AFM images show that AuNPs deposited at the GC electrode prepared in NaNO₃ solution form a significantly better, uniform, and homogeneous electrodeposited AuNP film on the GC electrode surface with nanoparticle sizes ranging from ∼36 to 60 nm. Meanwhile, from the electrochemical performances of the AuNP-modified GC electrodes, characterized by using a mixture of ferricyanide and ferrocyanide ions [Fe(CN₆)^3-/4-], there is no significant difference observed in the case of charge-transfer resistances (R _ct) and heterogeneous electron-transfer rate constants (k ^o), although there are differences in the surface morphologies of the electrodeposited AuNP films. Remarkably, the R _ct values of the AuNP-modified GC electrodes are lower than those of the bare GC electrode by 18-fold, as the R _ct values were found to be ∼6 Ω (p < 0.001, n = 3). This has resulted in obtaining k ^o values of AuNP-modified GC electrodes between the magnitude of 10^-2 and 10^-3 cm s^-1, giving a faster electron-transfer rate than that of the bare GC electrode (10^-4 cm s^-1). This study confirms that using an appropriate supporting background electrolyte plays a critical role in preparing electrodeposited AuNP films. This approach could lead to nanostructures with a more densely, uniformly, and homogeneously electrodeposited AuNP film on the electrode surfaces, albeit utilizing an easy and simple preparation method.

Two-dimensional self-assembled Au-Ag core-shell nanorods nanoarray for sensitive detection of thiram in apple using surface-enhanced Raman spectroscopy

The development of substrate with high sensitivity and good reproducibility for surface-enhanced Raman scattering (SERS) detection of contaminants in foods has attracted more and more attention. Herein, a stable two-dimensional (2D) Au-Ag core-shell nanorods (Au@Ag NRs) nanoarray substrate with high-performance SERS activity was developed based on interface self-assembly strategy and successfully applied to the detection of thiram in apple sample. A broad linearity range of 0.01-10 mg/L and a low limit of detection of 0.018 mg/L were achieved for thiram solution. The substrate was stable and exhibited satisfactory sensitivity after preserving at ambient temperature for 4 weeks. Furthermore, this method presented the comparable result to that acquired from high-performance liquid chromatography (HPLC) with satisfactory recoveries of 93-116%. The study indicated that the prepared Au@Ag NRs nanoarray substrate was promising for SERS detection of contaminants such as pesticides in foods.