Porous covalent organic framework liquid for boosting CO2 adsorption and catalysis via dynamically expanding effect

The features of intrinsic porosity and fluidity endow porous liquids (PLs) with unique properties and performance but the preparation of PLs remains challenging due to the difficulty in liquefying and keeping porous features at the same time. Herein, we develop a stepwise surface functionalization and ion exchange strategy to achieve a rare example of flexible covalent organic framework (COF)-based PL (COF-PLs). By coating the outer surface of the judiciously selected three-dimensional flexible COF-301 with an imidazolium salt corona, followed by liquefaction using the anion canopy potassium poly(ethylene glycol) sulfonate (PEGS) via electrostatic interactions, a flexible PL, COF-301-PL, can be obtained. Theoretical calculations and CO2 adsorption experiments reveal that the cavities of COF-301-PL undergo dynamic adjustments in response to changes in CO2 pressure. The dynamic expansion effect can not only provide additional gas adsorption capacity (7.04 mmol/g at 40 bar) but also facilitate the mass transfer of gas molecules during the catalytic process. Consequently, COF-301-PL exhibits superior catalytic efficiency for the conversion of CO2 into cyclic carbonate by a factor of 24 and 17 compared to those of PEGS and COF-301 solid counterpart, respectively. The optimization of substrate adsorption and mass transfer conditions consequently improves the overall efficiency of catalytic reactions. This work offers a new perspective on the preparation of PLs and their great potential application for gas adsorption and catalysis.

Porous liquids: an integrated platform for gas storage and catalysis

Porous liquids (PLs) represent a new frontier in materials design, combining the unique features of fluidity in liquids and permanent porosity in solids. By engineering well-defined pores into liquids via designed structure modification techniques, the greatly improved free volume significantly enhances the gas transport and storage capability of PL sorbents. Triggered by the promising applications of PLs in gas separation, PLs are further explored in catalysis particularly to integrate the gas storage and catalytic transformation procedure. This emerging field has demonstrated promising progress to advance catalytic procedures using PLs as catalysts, with performance surpassing that of the pure liquid and porous host counterparts. In this perspective article, the recent discoveries and progress in the field of integrated gas storage and catalysis by leveraging the PL platforms will be summarized, particularly compared with the traditional homogeneous or heterogeneous catalytic procedures. The unique features of PLs endow them with combined merits from liquid and solid catalysts and beyond which will be illustrated first. This will be followed by the unique techniques being utilized to probe the porosity and active sites in PLs and the structural evolution during the catalytic procedures. The catalytic application of PLs will be divided by the reaction categories, including CO2-involving transformation, O2-involving reaction, H2S conversion, hydrogenation reaction, and non-gas involving cascade reactions. In each reaction type, the synthesis approaches and structure engineering techniques of PLs, structure characterization, catalytic performance evaluation, and reaction mechanism exploration will be discussed, highlighting the structure-performance relationship and the advancement benefiting from the unique features of PLs.

Porous liquids: a novel porous medium for efficient carbon dioxide capture

Porous liquids (PLs) are the combination of porous solid material and flowing liquid, which provides alternative options to solve difficulties in the development of porous solids. With the booming development of PLs since 2015, plenty of syntheses and applications have been reported with a specific focus on gas adsorption. Given the lack of a comprehensive review, this paper reviews the application of PLs in CO2 capture. To start with, ground-breaking case studies are reviewed to help understand the progress of PLs research. Then, as a major part of this paper, studies of PLs for CO2 capture are reviewed separately. Moreover, five basic properties of porous liquids, including stability, viscosity, selectivity, porosity, capacity, and the influencing factors are systemically reviewed respectively. Furthermore, gas storage and release mechanisms in PLs are briefly outlined, and potential processing methods of PLs used for CO2 capture are discussed.

Accelerating Metal-Organic Framework Selection for Type III Porous Liquids by Synergizing Machine Learning and Molecular Simulation

MOF-based type III porous liquids, comprising porous MOFs dissolved in a liquid solvent, have attracted increasing attention in carbon capture. However, discovering appropriate MOFs to prepare porous liquids was still limited in experiments, wasting time and energy. In this study, we have used the density functional theory and molecular dynamics simulation methods to identify 4530 MOF candidates as the core database based on the idea of prohibiting the pore occupancy of porous liquids by the solvent, [DBU-PEG][NTf2] ionic liquid. Based on high-throughput molecular simulation, random forest machine learning models were first trained to predict the CO2 sorption and the CO2/N2 sorption selectivity of MOFs to screen the MOFs to prepare porous liquids. The feature importance was inferred based on Shapley Additive Explanations (SHAP) interpretation, and the ranking of the top 5 descriptors for sorption/selectivity trade-off (TSN) was gravimetric surface area (GSA) > porosity > density > metal fraction > pore size distribution (PSD, 3.5-4 Å). RICBEM was predicted to be one candidate for preparing porous liquid with CO2 sorption capacity of 20.87 mmol/g and CO2/N2 sorption selectivity of 16.75. The experimental results showed that the RICBEM-based porous liquid was successfully synthesized with CO2 sorption capacity of 2.21 mmol/g and CO2/N2 sorption selectivity of 63.2, the best carbon capture performance known to date. Such a screening method would advance the screening of cores and solvents for preparing type III porous liquids with different applications by addressing corresponding factors.

Hierarchical Yolk-Shell Porous Ionic Liquids with Lower Viscosity for Efficient C3H6/C3H8 Adsorption and Separation

Yolk-shell metal-organic framework (YS-MOF) liquids are candidate materials in large-size species with high-efficiency separation, owing to their hierarchical porosity, faster mass transfer, better compatibility, and higher solution processability than MOF liquids with micropores. Nevertheless, facile synthesis strategies of yolk-shell porous ionic liquids (YSPILs) with regulations of size and morphology are an ongoing challenge. Herein, we propose a general strategy to construct YSPILs based on Z67@PDA with tunable core sizes and morphologies. Benefiting from the unique hierarchical yolk-shell structure, as-prepared YSPILs exhibit promise in C3H6/C3H8 capture and separation with the increased sizes of core in yolk-shell ZIF-67@PDA. Advanced YS-MOF liquids have improved the adsorption properties and increased our ability to tailor chemical composition and pore architecture. Impressively, the adsorption capacity of C3H6 and C3H8 of YSPILs exhibits an approximately 3-fold enhancement compared with that of the neat ILs, confirming that the accessible porosities are retained. Effective C3H6/C3H8 separation performance of YSPILs over PILs based on ZIF-67, revealing the hierarchical porosity of YS-Z67@PDA liquids, benefits larger-size gas separation. Therefore, we believe that this work can not only help us to rationally design novel hierarchically porous ionic liquids but also promote candidate applications in large-size species separation, catalysis, and nanoreactors.

Experimental and Computational Mechanisms that Govern Long-Term Stability of CO2-Adsorbed ZIF-8-Based Porous Liquids

Porous liquids (PLs) based on the zeolitic imidazole framework ZIF-8 are attractive systems for carbon capture since the hydrophobic ZIF framework can be solvated in aqueous solvent systems without porous host degradation. However, solid ZIF-8 is known to degrade when exposed to CO₂ in wet environments, and therefore the long-term stability of ZIF-8-based PLs is unknown. Through aging experiments, the long-term stability of a ZIF-8 PL formed using the water, ethylene glycol, and 2-methylimidazole solvent system was systematically examined, and the mechanisms of degradation were elucidated. The PL was found to be stable for several weeks, with no ZIF framework degradation observed after aging in N₂ or air. However, for PLs aged in a CO₂ atmosphere, formation of a secondary phase occurred within 1 day from the degradation of the ZIF-8 framework. From the computational and structural evaluation of the effects of CO₂ on the PL solvent mixture, it was identified that the basic environment of the PL caused ethylene glycol to react with CO₂ forming carbonate species. These carbonate species further react within the PL to degrade ZIF-8. The mechanisms governing this process involves a multistep pathway for PL degradation and lays out a long-term evaluation strategy of PLs for carbon capture. Additionally, it clearly demonstrates the need to examine the reactivity and aging properties of all components in these complex PL systems in order to fully assess their stabilities and lifetimes.

A porous metal-organic cage liquid for sustainable CO2 conversion reactions

Porous liquids are fluids with the permanent porosity, which can overcome the poor gas solubility limitations of conventional porous solid materials for three phase gas-liquid-solid reactions. However, preparation of porous liquids still requires the complicated and tedious use of porous hosts and bulky liquids. Herein, we develop a facile method to produce a porous metal-organic cage (MOC) liquid (Im-PL-Cage) by self-assembly of long polyethylene glycol (PEG)-imidazolium chain functional linkers, calixarene molecules and Zn ions. The Im-PL-Cage in neat liquid has permanent porosity and fluidity, endowing it with a high capacity of CO₂ adsorption. Thus, the CO₂ stored in an Im-PL-Cage can be efficiently converted to the value-added formylation product in the atmosphere, which far exceeds the porous MOC solid and nonporous PEG-imidazolium counterparts. This work offers a new method to prepare neat porous liquids for catalytic transformation of adsorbed gas molecules.

Practical considerations in the design and use of porous liquids

The possibility of creating well-controlled empty space within liquids is conceptually intriguing, and from an application perspective, full of potential. Since the concept of porous liquids (PLs) arose several years ago, research efforts in this field have intensified. This review highlights the design, synthesis, and applicability of PLs through a thorough examination of the current state-of-the-art. Following a detailed examination of the fundamentals of PLs, we examine the different synthetic approaches proposed to date, discuss the nature of PLs, and their pathway from the laboratory to practical application. Finally, possible challenges and opportunities are outlined.

Underlying Polar and Nonpolar Modification MOF-Based Factors that Influence Permanent Porosity in Porous Liquids

It is increasingly apparent that porous liquids (PLs) have unique use cases due to the combination of ready liquid handling and their inherently high adsorption capacity. Among the PL types, those with permanent porosity are the most promising. Although Type II and III PLs have economic synthetic methods and can be made from a huge variety of metal-organic frameworks (MOFs) and solvents, these nanocomposites still need to be stable to be useful. This work aims to systematically explore the possibilities of creating PLs using different MOF modification methods. This delivered underpinning insights into the molecular-level influence between solvent and MOF on the overall nanocomposite stability. Zirconium-based metal-organic frameworks were combined with two different solvents of varying chemistry to deliver CO2 sorption capacities as high as 2.9 mmol g-1 at 10 bar. The results of the study could have far-reaching ramifications for future investigations in the PL field.

Porous Liquids: Computational Design for Targeted Gas Adsorption

In this Perspective, we present the unique gas adsorption capabilities of porous liquids (PLs) and the value of complex computational methods in the design of PL compositions. Traditionally, liquids only contain transient pore space between molecules that limit long-term gas capture. However, PLs are stable fluids that that contain permanent porosity due to the combination of a rigid porous host structure and a solvent. PLs exhibit remarkable adsorption and separation properties, including increased solubility and selectivity. The unique gas adsorption properties of PLs are based on their structure, which exhibits multiple gas binding sites in the pore and on the cage surface, varying binding mechanisms including hydrogen-bonding and π-π interactions, and selective diffusion in the solvent. Tunable PL compositions will require fundamental investigations of competitive gas binding mechanisms, thermal effects on binding site stability, and the role of nanoconfinement on gas and solvent diffusion that can be accelerated through molecular modeling. With these new insights PLs promise to be an exceptional material class with tunable properties for targeted gas adsorption.

A poly(amidoxime)-modified MOF macroporous membrane for high-efficient uranium extraction from seawater

Although metal–organic frameworks (MOFs) own excellent uranium adsorption capacity but are still difficult to conveniently extract uranium from seawater due to the discrete powder state. In this study, a new MOF-based macroporous membrane has been explored, which can high-efficiently extract uranium through continuously filtering seawater. Through modifying the UiO-66 with poly(amidoxime) (PAO), it can disperse well in a N,N-dimethylformamide solution of graphene oxide and cotton fibers. Then, the as-prepared super-hydrophilic MOF-based macroporous membrane can be fabricated after simple suction filtration. Compared with nonmodified MOFs, this UiO-66@PAO can be dispersed uniformly in the membrane because it can stabilize well in the solution, which have largely enhanced uranium adsorbing capacity owing to the modified PAO. Last but not least, different from powder MOFs, this UiO-66@PAO membrane provides the convenient and continuously uranium adsorbing process. As a consequence, the uranium extraction capacity of this membrane can reach 579 mg·g−1 in 32 ppm U-added simulated seawater for only 24 h. Most importantly, this UiO-66@PAO membrane (100 mg) can remove 80.6% uranyl ions from 5 L seawater after 50 filtering cycles. This study provides a universal method to design and fabricate a new MOF-based adsorbent for high-efficient uranium recovery from seawater.

Preparation of Templated Materials and Their Application to Typical Pollutants in Wastewater: A Review

As the pollution and destruction of global water resources become more and more severe, the treatment of wastewater has attracted significant attention. The template method is a synthetic method in which the template is the main configuration to control, influence, and modify the morphology as well as control the dimensions of the material, thus achieving the properties that determine the material. It is simple, highly reproducible, and predictable, and more importantly, it can effectively control the pore structure, size, and morphology of the material, providing a novel platform for the preparation of adsorbent materials with excellent adsorption properties. This review focuses on the classification of the templates according to their properties and spatial domain-limiting capabilities, reviews the types of hard and soft template materials and their synthetic routes, and further discusses the modulation of the morphological structure of the materials by the introduction of templates. In addition, the application and adsorption mechanisms of heavy metal ions and dyes are reviewed based on the regulatory behavior of the template method.

Transforming Porous Silica Nanoparticles into Porous Liquids with Different Canopy Structures for CO2 Capture

Porous liquids (PLs) have both liquid fluidity and solid porosity, thereby offering a variety of applications, such as gas sorption and separation, homogeneous catalysis, energy storage, and so forth. In this research, canopies with varying structures were utilized to modify porous silica nanoparticles to develop Type I PLs. According to experimental results, the molecular weight of canopies should be high enough to maintain the porous materials in the liquid state at room temperature. Characterization results revealed that PL_1_M2070 and PL_1_AC1815 displayed low viscosity and good fluidity. Both low temperature and high pressure positively influenced CO₂ capacity. The cavity occupancy resulted in poorer sorption capacity of PLs with branched canopies in comparison with that with linear canopies. Furthermore, the sorption capacity of PL_1_M2070 was 90.5% of the original CO₂ sorption capacity after 10 sorption/desorption cycles, indicating excellent recyclability.

Quick removal of metronidazole from aqueous solutions using metal–organic frameworks

Two MOFs were assembled, characterized and investigated in detail as efficient adsorbents for removal of the metronidazole antibiotic. Adsorption isotherms and kinetic features were also studied.

Post-synthetic modification of UiO-66-OH toward porous liquids for CO2 capture

A rather simple and feasible strategy to construct MOF porous liquids with low viscosities for CO2 capture.

Phosphomolybdic acid encapsulated in ZIF-8-based porous ionic liquids for reactive extraction desulfurization of fuels

Phosphomolybdic acid was encapsulated within a ZIF-8-based porous ionic liquid (HPMo@ZIF-8-PIL) for ultradeep reactive extraction desulfurization.

Porous Metal-Organic Framework Liquids for Enhanced CO2 Adsorption and Catalytic Conversion

The unique applications of porous metal-organic framework (MOF) liquids with permanent porosity and fluidity have attracted significant attention. However, fabrication of porous MOF liquids remains challenging because of the easy intermolecular self-filling of the cavity or the rapid settlement of porous hosts in hindered solvents that cannot enter their pores. Herein, we report a facile strategy for the fabrication of a MOF liquid (Im-UiO-PL) by surface ionization of an imidazolium-functionalized framework with a sterically hindered poly(ethylene glycol) sulfonate (PEGS) canopy. The Im-UiO-PL obtained in this way has a CO₂ adsorption approximately 14 times larger than that of pure PEGS. Distinct from a porous MOF solid counterpart, the stored CO₂ in Im-UiO-PL can be slowly released and efficiently utilized to synthesize cyclic carbonates in the atmosphere. This is the first example of the use of a porous MOF liquid as a CO₂ storage material for catalysis. It offers a new method for the fabrication of unique porous liquid MOFs with functional behaviors in various fields of gas adsorption and catalysis.

Enhancing Demulsification Performance for Oil-Water Separation through Encapsulating Ionic Liquids in the Pore of MIL-100(Fe)

Emulsion poses a greater challenge for the remediation of oily wastewater, which can be effectively resolved by the metal-organic framework of MIL-100(Fe). The formula Fe₃O(H₂O)₂(OH) (BTC)₂ pronounces that MIL-100(Fe) suffers from an intrinsic defect of less charged atoms, which limits its demulsification performance for oil-water separation. Herein, cations of the ionic liquid (1-allyl-3-methylimidazolium, Amim⁺) were encapsulated in the micropore of MIL-100(Fe) in situ to increase the positive charge density of MIL-100(Fe). Zeta potential demonstrated that the encapsulation of Amim⁺ increased the positive charge amount of MIL-100(Fe). N₂ probe isothermal adsorption/desorption and spectral measurements (X-ray photoelectron spectroscopy, ultraviolet-visible diffuse reflection spectroscopy, and attenuated total-reflectance infrared spectroscopy) revealed the host-guest interactions of π···Fe complexation and π···cation electrostatic attraction between Amim⁺ and MIL-100(Fe) for the composite materials. Amim⁺ encapsulation greatly enhanced the demulsification performance of MIL-100(Fe) for oil-in-water (O/W) emulsion stabilized by sodium dodecyl sulfate. Amim⁺-encapsulated MIL-100(Fe) with an Amim⁺/Fe³⁺ molar ratio of 1:1 [Amim@MIL-100(Fe)-3:3] showed a demulsification efficiency (DE) of 94% within 30 s, compared with MIL-100(Fe) within 30 min. The maximum DE of Amim@MIL-100(Fe)-3:3 was found to be more than 98% within 5 min. The DE lost by MIL-100(Fe) at the third run decreased from 36 to 17% after encapsulating Amim⁺. The analysis of surface charge and interfacial tension implied a demulsification mechanism of capturing-fusion, which could be promoted by the greater electrostatic attraction. Finally, the role of Amim⁺ on the outstanding demulsification performance by Amim⁺-encapsulated MIL-100(Fe) could be explained by the enhanced nonbonded interaction of electrostatic attraction and van der Waals based on the molecular dynamics simulation.

An In Situ Coupling Strategy toward Porous Carbon Liquid with Permanent Porosity

An in situ coupling approach is used to fabricate the porous carbon liquid with permanent porosity by directly dispersing hollow carbon nanospheres in polymerized ionic liquids. It is a kind of homogenous and stable type III porous liquid at room temperature. Because of the well-preserved permanent porosity, this unique porous carbon liquid is capable of absorbing the largest quantity of carbon dioxide than the reference PILs and solid carbon liquid, thus, can function as a promising candidate for application in gas storage. More importantly, this approach not only provides an easy method to tune the properties of those specific porous liquids, but also is suitable for fabricating other porous liquid based on varied porous structures (e.g., porous carbon nitride, porous boron nitride, and polymer with intrinsic microporosity), thus paving a viable path for the rational design and synthesis of novel porous liquids with functional properties for specific applications.

Transforming Metal-Organic Frameworks into Porous Liquids via a Covalent Linkage Strategy for CO2 Capture

Porous liquids (PLs), an emerging kind of liquid materials with permanent porosity, have attracted increasing attention in gas capture. However, directly turning metal-organic frameworks (MOFs) into PLs via a covalent linkage surface engineering strategy has not been reported. Additionally, challenges including reducing the cost and simplifying the preparation process are daunting. Herein, we proposed a general method to transform Universitetet i Oslo (UiO)-66-OH MOFs into PLs by surface engineering with organosilane (OS) and oligomer species via covalent bonding linkage. The oligomer species endow UiO-66-OH with superior fluidity at room temperature. Meanwhile, the resulting PLs showed great potential in both CO₂ adsorption and CO₂/N₂ selective separation. The residual porosity of PLs was verified by diverse characterizations and molecular simulations. Besides, CO₂ selective capture sites were determined by grand canonical Monte Carlo (GCMC) simulation. Furthermore, the universality of the covalent linkage surface engineering strategy was confirmed using different classes of oligomer species and another MOF (ZIF-8-bearing amino groups). Notably, this strategy can be extended to construct other PLs by taking advantages of the rich library of oligomer species, thus making PLs promising candidates for further applications in energy and environment-related fields, such as gas capture, separation, and catalysis.

Bimetallic metal-organic frameworks anchored corncob-derived porous carbon photocatalysts for synergistic degradation of organic pollutants

Metal-organic frameworks (MOFs) are promising for photocatalysis owing to their excellent structure and performance. Unfortunately, poor stability in both aqueous solutions and high temperatures and lack of adsorption centers during reactions limit their practical applications. Herein, a bimetallic MOF anchored corncob calcined derived activated carbon (CCAC) was successfully prepared by a one-step solvothermal method. Benefiting from unique structures and synergetic effect, the porous carbon provided a high specific surface area for stable MOF support and served as an organic pollutant buffer-reservoir, which was advantageous for efficient photocatalytic degradation of organic pollutants. The optimized MOF/CCAC-5 samples possessed excellent visible light degradation rate, i.e., 100% for Rh B, more than 96% for six mixed dyes, and 98% for tetracycline. This prominent photocatalytic activity was caused by active species, including photoelectrons (e^-), photo-holes (h⁺) and superoxide free radicals (•O^2-). The transient photocurrent response and electrochemical impedance tests showed that MOF/CCAC-5 exhibited a relatively high charge separation and low carrier recombination rate. Cyclic and simulation experiments indicated high reusability, stability and universality of the composite photocatalysts. These exciting results provide new pathways for the fabrication of MOFs anchored porous carbon materials.

Cyclodextrin Porous Liquid Materials for Efficient Chiral Recognition and Separation of Nucleosides

Porous liquids are porous materials that have exhibited unique properties in various fields. Herein, we developed a method to synthesize the type I porous liquids via liquefaction of cyclodextrins by chemical modification. The cyclodextrin porous liquids were characterized by Fourier-transform infrared (FTIR) spectroscopy, NMR, matrix-assisted laser desorption ionization-time-of-flight mass spectrometry (MALDI-TOF MS), circular dichroism (CD), and UV-vis spectroscopy. The measured ionic conductivity of the γ-cyclodextrin porous liquid was 500 times as great as that of its reactants, which was found to be the first instance with such great conductivity for a type I porous liquid. What is more, the γ-cyclodextrin porous liquid had been demonstrated experimentally to have outstanding chiral recognition ability toward pyrimidine nucleosides in water, which was further confirmed by computational simulations. Additionally, enantiomeric excess of the extracted nucleoside was achieved up to 84.81% by convenient extraction from the mixture of racemic nucleosides and γ-cyclodextrin porous liquid. The great features of the novel cyclodextrin porous liquids could bring opportunities in many fields, including the preparation of chiral separation materials, development of new drug screening mechanisms, and construction of chiral response materials.

Microwave Hydrothermally Synthesized Metal-Organic Framework-5 Derived C-doped ZnO with Enhanced Photocatalytic Degradation of Rhodamine B

C-doped ZnO particles have been successfully prepared by the calcination using microwave hydrothermally prepared metal-organic framework-5 (MOF-5) as the precursor. MOF-5 was turned into C-doped ZnO through calcination at 500 °C, and its cubic shape was well-maintained. X-ray photoelectron spectroscopic studies confirmed the C-doping in the ZnO. The as-prepared C-doped ZnO demonstrated a Rhodamine B (RhB) degradation efficiency of 98% in 2 h under an solar-simulated light irradiation, much higher than that of C-doped ZnO derived from MOF-5 synthesized by the ordinary hydrothermal method. The trapping experiment revealed that the crucial factors in the RhB removal were photogenerated h⁺ and •O₂^-.

Heterogeneous Catalytic Conversion of Sugars Into 2,5-Furandicarboxylic Acid

Achieving the goal of living in a sustainable and greener society, will need the chemical industry to move away from petroleum-based refineries to bio-refineries. This aim can be achieved by using biomass as the feedstock to produce platform chemicals. A platform chemical, 2,5-furandicarboxylic acid (FDCA) has gained much attention in recent years because of its chemical attributes as it can be used to produce green polymers such polyethylene 2,5-furandicarboxylate (PEF) that is an alternative to polyethylene terephthalate (PET) produced from fossil fuel. Typically, 5-(hydroxymethyl)furfural (HMF), an intermediate product of the acid dehydration of sugars, can be used as a precursor for the production of FDCA, and this transformation reaction has been extensively studied using both homogeneous and heterogeneous catalysts in different reaction media such as basic, neutral, and acidic media. In addition to the use of catalysts, conversion of HMF to FDCA occurs in the presence of oxidants such as air, O2, H2O2, and t-BuOOH. Among them, O2 has been the preferred oxidant due to its low cost and availability. However, due to the low stability of HMF and high processing cost to convert HMF to FDCA, researchers are studying the direct conversion of carbohydrates and biomass using both a single- and multi-phase approach for FDCA production. As there are issues arising from FDCA purification, much attention is now being paid to produce FDCA derivatives such as 2, 5-furandicarboxylic acid dimethyl ester (FDCDM) to circumvent these problems. Despite these technical barriers, what is pivotal to achieve in a cost-effective manner high yields of FDCA and derivatives, is the design of highly efficient, stable, and selective multi-functional catalysts. In this review, we summarize in detail the advances in the reaction chemistry, catalysts, and operating conditions for FDCA production from sugars and carbohydrates.

Advances in Template Prepared Nano-Oxides and their Applications: Polluted Water Treatment, Energy, Sensing and Biomedical Drug Delivery

The nano-oxide materials with special structures prepared by template methods have a good dispersion, regular structures and high specific surface areas. Therefore, in some areas, improved properties are observed than conventional bulk oxide materials. For example, in the treatment of dye wastewater, the treatment efficiency of adsorbents and catalytic materials prepared by template method was about 30 % or even higher than that of conventional samples. This review mainly focuses on the progress of inorganic, organic and biological templates in the preparation of micro- and nano- oxide materials with special morphologies, and the roles of the prepared materials as adsorbents and photocatalysts in dye wastewater treatment. The characteristics and advantages of inorganic, organic and biological template are also summarized. In addition, the applications of template method prepared oxides in the field of sensors, drug carrier, energy materials and other fields are briefly discussed with detailed examples.

Nanofibrils of a CuII-Thiophenyltriazine-Based Porous Polymer: A Diverse Heterogeneous Nanocatalyst

Herein, we report knitting of a thiophenyltriazine-based porous organic polymer (TTPOP) with high surface area and high abundance of nitrogen and sulfur sites, synthesized through a simple one-step Friedel-Crafts reaction of 2,4,6-tri(thiophen-2-yl)-1,3,5-triazine and formaldehyde dimethyl acetal in the presence of anhydrous FeCl₃, and thereafter grafting of Cu(OAc)₂·H₂O in the porous polymer framework to achieve the potential catalyst (Cu^II-TTPOP). TTPOP and Cu^II-TTPOP were characterized thoroughly utilizing solid-state ¹³C-CP MAS NMR, Fourier transform infrared, wide-angle powder X-ray diffraction, thermogravimetric analysis, and X-ray photoelectron spectroscopy and surface imaging by transmission electron microscopy and field emission scanning electron microscopy. The porosity of the nanomaterials was observed in the surface imaging and verified through conducting N₂ gas adsorption techniques. Keeping in mind the tremendous importance of C-C and C-N coupling and cyclization processes, the newly synthesized Cu^II-TTPOP was employed successfully for a wide range of organic catalytic transformations under mild conditions to afford directly valuable diindolylmethanes and spiro-analogues, phthalimidines, propargyl amines, and their sugar-based chiral compounds with high yields using readily available substrates. The highly stable new heterogeneous catalyst showed outstanding sustainability, robustness, simple separation, and recyclability.

Transforming surface-modified metal organic framework powder into room temperature porous liquids via an electrical balance strategy

The design of MOF-based room temperature porous liquids via an electrical balance strategy.

One-step co-precipitation synthesis of novel BiOCl/CeO2composites with enhanced photodegradation of rhodamine B

BiOCl/CeO₂composites were synthesized by a facile one-step co-precipitation method and showed good photodegradation activity of rhodamine B (RhB).