One-Step Syntheses of Face-Centered Cubic OsxPt1-x/C with Near-Zero-Overpotential Hydrogen Evolution from Electronic-State Engineering

The loading states and crystal structure control of solid solution catalysts, which greatly influence the catalytic performance, have not yet been achieved simultaneously due to the limitations of previous synthetic methodologies. In this work, a one-pot in situ polyol method is developed for the phase-control synthesis of face-centered cubic (fcc)-dominated and well-dispersed immiscible OsxPt1-x/C. Most fcc-OsxPt1-x/C catalysts exhibit superior hydrogen evolution reaction (HER) catalytic activities compared to those of Pt/C catalysts. Remarkably, the overpotential of fcc-Os0.3Pt0.7/C in 0.5 m H2SO4 at 10 mA·cm-2 is only 1.0 mV as the top record. In Os0.5Pt0.5/C and Os0.3Pt0.7/C, the weakening of H adsorption on Pt sites, resulting from electronic state adjustments induced by Os alloying, modify the reaction pathways by promoting H2 desorption from more favorable coupled sites, thereby achieving state-of-the-art HER catalytic activities.

Phase Control in Monometallic and Alloy Nanomaterials

Metal nanomaterials with unconventional phases have been recently developed with a variety of methods and exhibit novel and attractive properties such as high activities for various catalytic reactions and magnetic properties. In this review, we discuss the progress and the trends in strategies for synthesis, crystal structure, and properties of phase-controlled metal nanomaterials in terms of elements and the combination of alloys. We begin with a brief introduction of the anomalous phase behavior derived from the nanosize effect and general crystal structures observed in metal nanomaterials. Then, phase control in monometallic nanomaterials with respect to each element and alloy nanomaterials classified into three types based on their crystal structures is discussed. In the end, all the content introduced in this review is summarized, and challenges for advanced phase control are discussed.

Monitoring the Structural Changes in Iridium Nanoparticles during Oxygen Evolution Electrocatalysis with Operando X-ray Total Scattering

Understanding the structure of nanoparticles under (electro)catalytic operating conditions is crucial for uncovering structure-property relationships. By combining operando X-ray total scattering and pair distribution function analysis with operando small-angle X-ray scattering (SAXS), we obtained comprehensive structural information on ultrasmall (<3 nm) iridium nanoparticles and tracked their changes during oxygen evolution reaction (OER) in acid. When subjected to electrochemical conditions at reducing potentials, the metallic Ir nanoparticles are found to be decahedral. The iridium oxide formed in the electrochemical oxidation contains small rutile-like clusters composed of edge- and corner-connected [IrO6] octahedra of a very confined range. These rutile domains are smaller than 1 nm. Combined with complementary SAXS data analysis to extract the particle size, we find that the OER-active iridium oxide phase lacks crystalline order. Additionally, we observe an iridium oxide contraction under OER conditions, which is confirmed by operando X-ray absorption spectroscopy. Our results highlight the need for multitechnique operando studies for a complete understanding of the electrochemically formed Ir oxide active in OER.

Osmium(III) Acetylacetonate and Its Missing Polymorph: A Magnetic and Structural Investigation

Despite the potential for their application, the magnetic behavior of complexes containing 4d and 5d metal ions is underexplored, evidencing the need for benchmark multi-technique studies on simple molecules. We report here a structural and magnetic study on osmium(III) acetylacetonate [Os(acac)3]. X-ray single crystal diffraction did not allow us to determine the structure of the β-polymorph of [Os(acac)3]. The combined magnetic (dc magnetic measurements on powder and cantilever torque magnetometry on single crystal) and spectroscopic (electron paramagnetic resonance, EPR) characterization is here used to provide further evidence that its structure is indeed the one of the orthorhombic "missing polymorph", analogous to the ruthenium(III) derivative. Our study shows that all acetylacetonate complexes of the eighth group of the periodic table show dimorphism and are isomorphic. The EPR characterization allowed the experimental assessment of the easy axis nature of the ground doublet and the determination of the first hyperfine coupling in an osmium complex. Torque magnetometry, applied here for the first time on an osmium-based molecule, determined the orientation of the easy axis along the pseudo C3 axis of the complex. Ac magnetometric measurements revealed in-field slow relaxation of the magnetization further slowed by the suppression of dipolar fields via magnetic dilution in the isostructural gallium(III) analogue.

The Phase Control of Transition Metallic Elements via Facile Chemical and Physical Syntheses

The crystal phases of metals are important factors to tune the properties of metals, and therefore received extensive attention. Traditionally, phase control is performed within limited numbers of elements by harsh conditions, such as face-centered cubic Fe by high temperature. This review summarizes most reports in metal phase control area, including elements of Fe, Co, Ni, Cu, Ru, Pd, Rh, Os and Au. For every metallic element, the facile phase control methods are systematically introduced, such as epitaxial growth, ball milling, chemical reduction, etc. Their corresponding applications and the mechanisms for phase control are thoroughly discussed.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

BCC-Cu nanoparticles: from a transient to a stable allotrope by tuning size and reaction conditions

Metallic copper generally adopts an FCC structure. In this work, we detect highly unusual BCC-structured Cu nanoparticles as a transient intermediate during the H2 reduction of a CuI precursor, [Cu4OtBu4], grafted onto the surface of partially dehydroxylated silica. The Cu BCC structure, assigned by in situ Cu K-edge XANES and EXAFS, as well as in situ synchrotron PXRD, converts upon heating into the most commonly found FCC allotrope. DFT calculations show that the BCC-Cu phase is in fact predicted to be more stable for small particles, and that their stability increases at lower H2 concentrations. Using this knowledge, we show that it is possible to synthesize BCC-structured Cu nanoparticles as a stable allotrope by reduction of the same grafted precursor either in 10% H2 diluted in Ar or 100% H2 at low temperature.

Osmium and OsO x nanoparticles: an overview of syntheses and applications

Precious metal nanoparticles are key for a range of applications ranging from catalysis and sensing to medicine. While gold (Au), silver (Ag), platinum (Pt), palladium (Pd) or ruthenium (Ru) nanoparticles have been widely studied, other precious metals are less investigated. Osmium (Os) is one of the least studied of the precious metals. However, Os nanoparticles are interesting materials since they present unique features compared to other precious metals and Os nanomaterials have been reported to be useful for a range of applications, catalysis or sensing for instance. With the increasing availability of advanced characterization techniques, investigating the properties of relatively small Os nanoparticles and clusters has become easier and it can be expected that our knowledge on Os nanomaterials will increase in the coming years. This review aims to give an overview on Os and Os oxide materials syntheses and applications.

Carbon-Supported Noble-Metal Nanoparticles for Catalytic Applications—A Review

Noble-metal nanoparticles (NMNPs), with their outstanding properties, have been arousing the interest of scientists for centuries. Although our knowledge of them is much more significant today, and we can obtain NMNPs in various sizes, shapes, and compositions, our interest in them has not waned. When talking about noble metals, gold, silver, and platinum come to mind first. Still, we cannot forget about elements belonging to the so-called platinum group, such as ruthenium, rhodium, palladium, osmium, and iridium, whose physical and chemical properties are very similar to those of platinum. It makes them highly demanded and widely used in various applications. This review presents current knowledge on the preparation of all noble metals in the form of nanoparticles and their assembling with carbon supports. We focused on the catalytic applications of these materials in the fuel-cell field. Furthermore, the influence of supporting materials on the electrocatalytic activity, stability, and selectivity of noble-metal-based catalysts is discussed.

Surfactant-free syntheses and pair distribution function analysis of osmium nanoparticles

A surfactant-free synthesis of precious metal nanoparticles (NPs) performed in alkaline low-boiling-point solvents has been recently reported. Monoalcohols are here investigated as solvents and reducing agents to obtain colloidal Os nanoparticles by using low-temperature (<100 °C) surfactant-free syntheses. The effect of the precursor (OsCl3 or H2OsCl6), precursor concentration (up to 100 mM), solvent (methanol or ethanol), presence or absence of a base (NaOH), and addition of water (0 to 100 vol %) on the resulting nanomaterials is discussed. It is found that no base is required to obtain Os nanoparticles as opposed to the case of Pt or Ir NPs. The robustness of the synthesis for a precursor concentration up to 100 mM allows for the performance of X-ray total scattering with pair distribution function (PDF) analysis, which shows that 1-2 nm hexagonal close packed (hcp) NPs are formed from chain-like [OsO x Cl y ] complexes.

Simple Setup Miniaturization with Multiple Benefits for Green Chemistry in Nanoparticle Synthesis

The development of nanomaterials often relies on wet-chemical synthesis performed in reflux setups using round-bottom flasks. Here, an alternative approach to synthesize nanomaterials is presented that uses glass tubes designed for NMR analysis as reactors. This approach uses less solvent and energy, generates less waste, provides safer conditions, is less prone to contamination, and is compatible with high-throughput screening. The benefits of this approach are illustrated by an in breadth study with the synthesis of gold, iridium, osmium, and copper sulfide nanoparticles.

Formation and selected catalytic properties of ruthenium, rhodium, osmium and iridium nanoparticles

The synthesis and applications in catalysis of nanoparticles formed from ruthenium, rhodium, osmium and iridium have been reviewed.

Synthesis and Characterization of a Mixed Nanofertilizer Influencing the Nutrient Use Efficiency, Productivity, and Nutritive Value of Tomato Fruits

Due to the higher potential for enhancing nutrient use efficiency, nanofertilizer (NF) is crucial in sustainable crop production. Thus, foliar-applied mixed nanofertilizer (MNFf) and commercial fertilizer (CF) into the soil (CFs) were claimed together ([MNFf + CFs]) and comparative nutrient use efficiency (NUE), productivity, and nutritional properties of tomato fruits were investigated. The mixed nanofertilizer (MNF) was prepared in our laboratory and characterized using scanning electron microscopy, X-ray diffraction, and Fourier transform infrared. To avoid the interference of other factors, all the treatments were divided into three groups: (i) blank treatment (no fertilizer), (ii) CF treatment, and (iii) combined [MNFf + CFs] treatment. The vegetative growth and qualitative and quantitative attributes of tomatoes were recorded, and the NUE, total production, and benefit-cost ratio (BCR) were also calculated. In addition, comparative nutritional properties for all treatments were analyzed. The plant's height, stem diameter, root length, photosynthetic pigments, leaf minerals, and qualitative traits of tomato fruits were significantly (p < 0.05) increased by [MNFf + CFs] treatment compared to CFs. The protein, fiber, Fe, Zn, and K contents were significantly (p < 0.05) increased by 23.80, 38.10, 44.23, 60.01, and 2.39%, respectively, with the [MNFf + CFs] treatment as compared to CFs, while the ash and protein contents were both lower than the untreated tomato. Moreover, [MNFf + CFs] treatment has significantly (p < 0.05) increased the antioxidant properties. The NUE, total production, and BCR were also increased by 26.08, 26.04, and 25.38%, respectively, with the same treatment. Thus, [MNFf + CFs] treatment could be a potential alternative for reducing the excess use of CF.

Unconventional-Phase Crystalline Materials Constructed from Multiscale Building Blocks

Crystal phase, an intrinsic characteristic of crystalline materials, is one of the key parameters to determine their physicochemical properties. Recently, great progress has been made in the synthesis of nanomaterials with unconventional phases that are different from their thermodynamically stable bulk counterparts via various synthetic methods. A nanocrystalline material can also be viewed as an assembly of atoms with long-range order. When larger entities, such as nanoclusters, nanoparticles, and microparticles, are used as building blocks, supercrystalline materials with rich phases are obtained, some of which even have no analogues in the atomic and molecular crystals. The unconventional phases of nanocrystalline and supercrystalline materials endow them with distinctive properties as compared to their conventional counterparts. This Review highlights the state-of-the-art progress of nanocrystalline and supercrystalline materials with unconventional phases constructed from multiscale building blocks, including atoms, nanoclusters, spherical and anisotropic nanoparticles, and microparticles. Emerging strategies for engineering their crystal phases are introduced, with highlights on the governing parameters that are essential for the formation of unconventional phases. Phase-dependent properties and applications of nanocrystalline and supercrystalline materials are summarized. Finally, major challenges and opportunities in future research directions are proposed.

Phase Control of Noble Monometallic and Alloy Nanomaterials by Chemical Reduction Methods

In recent years, the phase control of monometallic and alloy nanomaterials has attracted great attention because of the potential to tune the physical and chemical properties of these species. In this Review, an overview of the latest research progress in phase-controlled monometallic and alloy nanomaterials is first given. Then, the phase-controlled synthesis using a chemical reduction method are discussed, and the formation mechanisms of these nanomaterials are specifically highlighted. Lastly, the challenges and future perspectives in this new research field are discussed.