Interplay between conformational and solvent effects in UV-visible absorption spectra: curcumin tautomers as a case study

Fabrication and evaluation of polylactic acid-curcumin containing carbon nanotubes (CNTs) wound dressing using electrospinning method with experimental and computational approaches

The development of advanced wound dressings has seen a significant leap with the integration of biodegradable nanofibers. This study introduces an innovative approach by designing polylactic acid (PLA)-curcumin nanofiber wound dressings enhanced with carbon nanotubes (CNTs). Using the electrospinning method, various formulations were crafted, incorporating diverse weight percentages of curcumin and CNTs. Comprehensive analyses, including FT-IR and SEM, confirmed the structural and physical integrity of the nanofibers, while tensile testing revealed a notable enhancement in mechanical strength with the addition of CNTs. Drug release evaluations highlighted a controlled and predictable release pattern of curcumin across all samples. Water absorption tests demonstrated the ability of PLA nanofibers to absorb up to 364%, with PLA-Cur-0.03%CNT samples absorbing 163%, showcasing their adaptability to wound exudates. Importantly, cytotoxicity assessments confirmed the biocompatibility of all samples, with high cell viability observed after 3 and 7 days. Antibacterial tests underscored the efficacy of CNT-incorporated samples, with PLA-Cur-0.05%CNT achieving the highest antibacterial activity at 78.95%. Additionally, using Density Functional Theory (DFT) calculations, the transition state, HOMO-LUMO energy, and equilibrium constant were explored, revealing higher equilibrium constants for keto-enol transformations compared to enol-keto in various solvents. Tautomeric conversion is easier in polar solvents due to the stability of charged species. HOMO-LUMO energy analysis revealed the stability and chemical activity of curcumin in solvents. This comprehensive research not only highlighted the mechanical, antibacterial, and drug delivery capabilities of the wound dressing but also provided an innovative approach for designing and optimizing pharmaceutical compounds under challenging chemical environments through advanced modeling and computational techniques.

Fmoc-FF Nanogel-Mediated Delivery of Doxorubicin and Curcumin in Thyroid Cancer Cells

Background: Thyroid cancer (TC) is the most prevalent endocrine malignancy, and is categorized into well-differentiated and aggressive anaplastic types. Novel therapeutic modalities are needed for TC. Nanomedicine is a promising strategy for the development of precision medicine. In this context, we investigated the use of nanogels (NGs) to deliver agents with different physicochemical properties, specifically the hydrophilic agent doxorubicin (DOX) and the hydrophobic compound curcumin (CUR), in TC cell lines. Methods: Nα-9-fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF) peptide-based NGs loaded with DOX and CUR were formulated using the solvent-switch method. DOX-loaded NGs were previously characterized. CUR-loaded NGs were characterized through rheology, scanning electron microscopy (SEM), dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), and Fourier transform infrared (FT-IR) spectroscopy. Confocal microscopy, q-RT-PCR, and ATP lite assays were performed to evaluate the uptake and delivery of DOX- and CUR-loaded NGs on TC cell lines. Results: CUR-loaded NGs exhibited a mean diameter of approximately 204.3 nm and a zeta potential of -34.6 mV, indicative of a good stability. In vitro release studies revealed a sustained release profile of CUR over 72 h. Functional analyses demonstrated that Fmoc-FF-loaded NGs were internalized into TC cell lines. They were primarily localized in the cytoplasm rather than in early endosomes, thereby ensuring intracellular stability. Furthermore, Fmoc-FF NGs reduced the nuclear uptake kinetics of DOX in TC cells, suggesting a potential reduction in dose-limiting toxicity. Comparative studies with CUR-loaded NGs revealed similar internalization and delayed nuclear uptake, highlighting the efficacy of Fmoc-FF NGs in delivering hydrophobic agents. Conclusions: Overall, the data suggest that Fmoc-FF NGs represent a promising strategy for delivering agents with diverse physicochemical properties in TC, enhancing their efficacy and safety and warranting further investigation.

Comparative Investigation of Untargeted and Targeted Metabolomics in Turmeric Dietary Supplements and Rhizomes

In the present study, we analyzed the bioactive curcuminoids content in eight capsules (DS-1-DS-7 and DS-9), one tablet (DS-8), three ground turmeric samples (DS-10-DS-12), and three ground turmeric rhizomes (TR-1, TR-2, and TR-3). Initial screening with infrared and ultraviolet-visible spectroscopy coupled with a principal component analysis (PCA) revealed distinct differences between the samples analyzed. Hence, targeted and untargeted analyses were performed using ultra-high-performance liquid chromatography and gas chromatography coupled with mass spectrometry detections. The results show that the total curcuminoids content ranged from 1.3 to 69.8 mg/100 mg and the volatile component ranged from 0.7 to 9.1 mg/100 mg. The percentage ratio of the three prominent curcuminoids, bisdesmethoxycurcumin (BMC), desmethoxycurcumin (DMC), and curcumin (CUR), also varied remarkably compared to the expected ratio (BMC:DMC:CUR ratio of 1:2:6) described in the literature. The three prominent volatile compounds identified in most samples were ar-turmerone, turmerone, and curlone. The results demonstrated significant differences in the volatile compound levels among the DS and dried rhizome samples. The non-targeted analysis resulted in the identification of over 40 compounds, including bioactives such as piperine, phenolic acids, and amino acids. A disintegration study was performed on limited DS according to the United States Pharmacopeia protocol. The results reveal that all the selected DS samples passed the disintegration test. An analysis of curcuminoids from DS samples in neutral and acidic solutions demonstrated that all curcuminoids (BMC, DMC, and CUR) existed in the keto and enol forms and their concentrations changed with pH. This study will be of significant interest to manufacturers, consumers, and pharmacologists to accurately understand the bioactivities of three curcuminoids in different isomeric forms.

Temperature Sensitive Pluronic F127‐Based Gels Incorporating Natural Therapeutic Agents

Pluronic F127 copolymer is used as the main component to design injectable gels for therapeutic applications. Xanthan gum is added as an excipient to improve gel properties under physiological conditions. A polyphenol bioactive compound, curcumin, is selected as therapeutic agent with beneficial effects on metabolism and many diseases. The encapsulation efficiency and stability of formulations are investigated in an aqueous environment and in acetic acid solutions. The interactions between the hydrophobic polyphenol and the polymer matrix are investigated through rheology, DLS, and FTIR spectroscopy. The viscoelasticity of gels, correlated with the network structure, is influenced by xanthan gum or acetic acid addition. FTIR analysis of curcumin incorporated into the gel provides the evidence for interaction of the phenyl rings of both keto‐enol and di‐keto tautomers with the polymeric matrix. The spherical curcumin‐encapsulated micelles provided antioxidant properties. The kinetics of curcumin release from the Pluronic F127‐based gels suggests anomalous transport phenomena controlled by diffusion through the network and hydrodynamic effects. Both gel and lyophilized form of micellar encapsulated curcumin composites exhibited good stability for long‐term storage under ambient conditions.

Modeling UV/Vis Absorption Spectra of Food Colorants in Solution: Anthocyanins and Curcumin as Case Studies

We present a comprehensive computational study of UV/Vis absorption spectra of significant food colorants, specifically anthocyanins and curcumin tautomers, dissolved in polar protic solvents, namely water and ethanol. The absorption spectra are simulated using two fully polarizable quantum mechanical (QM)/molecular mechanics (MM) models based on the fluctuating charge (FQ) and fluctuating charge and dipoles (FQFμ) force fields. To accurately capture the dynamical aspects of the solvation phenomenon, atomistic approaches are combined with configurational sampling obtained through classical molecular dynamics (MD) simulations. The calculated QM/FQ and QM/FQFμ spectra are then compared with experiments. Our findings demonstrate that a precise reproduction of the UV/Vis spectra of the studied pigments can be achieved by adequately accounting for configurational sampling, polarization effects, and hydrogen bonding interactions.

Close-Up Look at Electronic Spectroscopic Signatures of Common Pharmaceuticals in Solution

Simulating electronic properties and spectral signals requires robust computational approaches that need tuning with the system's peculiarities. In this paper, we test implicit and fully atomistic solvation models for the calculation of UV-vis and electronic circular dichroism (ECD) spectra of two pharmaceutically relevant molecules, namely, (2S)-captopril and (S)-naproxen, dissolved in aqueous solution. Room temperature molecular dynamics simulations reveal that these two drugs establish strong contacts with the surrounding solvent molecules via hydrogen bonds. Such specific interactions, which play a major role in the spectral response and are neglected in implicit approaches, are further characterized and quantified with natural bond orbital methods. Our calculations show that simulated spectra, and especially ECD, are in good agreement with experiments solely when conformational and configurational dynamics, mutual polarization, and solute-solvent repulsion effects are considered.

Keto-enol tautomerism of β-diketo molecules in the presence of graphitic materials through π-π stacking

The pseudo aromatic structures of the enol forms of β-diketo molecules are stabilized on the surface of graphitic materials through π-π interaction. This phenomenon has been studied through a relative binding energy calculation using density functional theory. The intermolecular interaction as well as the relative stability of the keto or enol tautomer is also influenced by the functional groups attached to the graphitic materials. The theoretical results are supported by spectroscopic evidence. Our study with three different graphitic materials, with a comparable extent of π-electrons and acid functionalities, reveals that π-π interaction is the main governing factor for the stability of the enol forms. Then comes the role of intermolecular H-bonding between the adsorbate and adsorbent. This can stabilize both the keto and enol tautomers, according to the arrangements of the functional groups and the geometry of the β-diketo molecules. Acid groups on the adsorbent can enhance enolization through H-bonding, but an excess of functional groups may decrease the possibility of π-π interaction by disrupting the π-clouds of the graphitic surface and pushing the adsorbate and adsorbent away from each other beyond a π-π stacking distance. In that situation, H-bonding becomes crucial for determining the relative stability. Our results indicate that graphitic materials with acid functionalities across their edges, and ample π-cloud, are the most suitable catalysts for enolization.

Exploring the Mechanism of Activation of CFTR by Curcuminoids: An Ensemble Docking Study

Curcumin, a major constituent of turmeric (Curcuma longa L.), has beneficial effects against several diseases. In cystic fibrosis (CF), this compound improves patients' symptoms by recovering the activity of a number of mutants of the cystic fibrosis transmembrane conductance regulator (CFTR). Despite holding promise in the treatment of CF, the curcumin binding site in CFTR and the molecular mechanism of activation of this channel are still unknown. The results of this study, based on docking and molecular dynamics (MD) simulations, allow us to propose that curcumin binds the closed ATP-free CFTR near the nucleotide-binding domain 1 (NBD1)/ICl1/ICl4 interface. The bound ligand, once approached by the nucleotide-binding domain 2 (NBD2) during transient channel opening, lays at a multiple interdomain cross point. Thereafter, curcumin can bridge NBD1 and NBD2, and also ICL1/ICL4 and ICL2/ICL3, finally tightening the same interdomain interactions that normally uphold the open conformation in the wild-type ATP-bound CFTR. The proposed binding site is compatible with biochemical observations made in previous CFTR-curcumin interaction studies. These findings provide a framework for the design of novel drugs that activate CFTR mutants characterized by defects in ATP binding and/or NBD dimerization or even lacking NBD2.

First-Principles Study of the Dispersion Effects in the Structures and Keto-Enol Tautomerization of Curcumin

Noncovalent interactions, such as dispersion, play a significant role in the stability of flexible molecules, such as curcumin. This study revealed the importance of dispersion correction in the structure and keto-enol tautomerization of curcumin, which has rarely been addressed in computational studies. We rigorously constructed all possible unique curcumin conformers in the enol and keto forms within the first-principles framework. Regardless of the different environments, we carefully explained the agreement between the computational geometry (in the gas phase) and the experimental measurement (in the polymorph) by using dispersion correction. The calculation results for the aqueous solution of conformational abundance, thermochemistry, and reaction kinetics support the experimental observations after considering the dispersion correction. The study also suggests a water-catalyzed mechanism for keto-enol tautomerization, where dispersion correction plays a role in decreasing the energy barrier and making the keto form thermochemically and kinetically favorable. Our results could be helpful in future computational studies to find a method for increasing the aqueous solubility of curcumin; hence, the potential of curcumin as a multifunctional medicine can be fully achieved.

How Does Pseudo-Jahn-Teller Effect Induce the Photoprotective Potential of Curcumin?

In this paper, the molecular and electronic structure of curcumin is studied. High-symmetric gas-phase tautomers and their deprotonated forms in various symmetry groups are identified. The stability of lower-symmetry structures was explained by using the Pseudo-Jahn-Teller (PJT) effect. This effect leads to stable structures of different symmetries for the neutral enol and keto forms. The presented analysis demonstrated the potential significance of the PJT effect, which may modulate the setting of electronic and vibrational (vibronic) energy levels upon photodynamic processes. The PJT effect may rationalize the photoprotection action and activity of naturally occurring symmetric dyes.

Preparation, Characterization, and Evaluation of Curcumin-Graphene Oxide Complex-Loaded Liposomes against Staphylococcus aureus in Topical Disease

This study describes the development and characterization of curcumin with graphene oxide complex (CUR + GO) loaded into liposomes for treating skin disease. The developed complex was characterized by X-ray diffraction and showed a broad halo pattern, confirming the amorphous nature of the resulting complex. Furthermore, scanning electron microscopy revealed the irregular porous morphology of the complex-highlighting loss of the crystallinity and the emergence of the amorphous phase. Additionally, the liposomes showed long-term stability at 2-8 °C and 25 ± 2 °C/60 ± 5%RH with nonsignificant variations in the particle size, polydispersity index, and zeta potential. Overall, optical and high-resolution transmission electron microscopy images of liposomes showed a consistent shape, and no aggregation with uniform particle size distribution was observed. Furthermore, the cumulative drug release in the first 6 h was 71.24 and 64.24% for CUR-loaded liposomes and CUR-GO-loaded liposomes, respectively. The lower value of drug release might be attributed to the complex development. The drug release model found the first order with non-Fickian diffusion process, which is often observed at higher n > 0.5. The antibacterial activity of the CUR with GO-loaded liposome (D2) offered higher anti-microbial activity over other formulations against the mentioned bacterial microorganism that causes skin diseases.

Multiple Facets of Modeling Electronic Absorption Spectra of Systems in Solution

In this Perspective, we outline the essential physicochemical aspects that need to be considered when building a reliable approach to describe absorption properties of solvated systems. In particular, we focus on how to properly model the complexity of the solvation phenomenon, arising from dynamical aspects and specific, strong solute-solvent interactions. To this end, conformational and configurational sampling techniques, such as Molecular Dynamics, have to be coupled to accurate fully atomistic Quantum Mechanical/Molecular Mechanics (QM/MM) methodologies. By exploiting different illustrative applications, we show that an effective reproduction of experimental spectral signals can be achieved by delicately balancing exhaustive sampling, hydrogen bonding, mutual polarization, and nonelectrostatic effects.

Keto-enol tautomerism of curcumin in the preparation of nanobiocomposites with fumed silica

The tautomerism of curcumin (Cur) in water-ethanol solutions in the presence of fumed silica was studied by UV-visible spectroscopy. The results showed that the enol tautomer exists at an ethanol concentration in solution >50%, and with an increase in the water content, the tautomeric equilibrium shifts towards the formation of the keto tautomer. Quantum-chemical calculations (solvation model SM 5.42/6-31G (d), GAMESSPLUS) of various curcumin isomers confirmed that the existence of curcumin keto tautomer in aqueous solution is more thermodynamically favorable. The ratio of keto and enol forms also depends on the dielectric constant of water-ethanol solutions: at ε < 45, only the enol form of curcumin exists, while at ε > 45, the relative amount of the keto tautomer increases in proportion to the dielectric constant. Curcumin tautomers adsorb on fumed silica in different ways. At a low curcumin concentration in the initial solutions (<1.5 × 10^-4 M), only the enol tautomer forms a monolayer on the sorbent surface, apparently due to its planar structure. The keto tautomer, characterized by a bent structure, begins to adsorb only at a concentration of Cur > 1.5 × 10^-4 M, being a component of molecular aggregates with coplanar geometry.

Curcumin-Based β-Diketo Ligands for Ga3+: Thermodynamic Investigation of Potential Metal-Based Drugs

Curcumin is known for its therapeutic properties; among these, antioxidant, anti-inflammatory and anti-cancer ones stand out. Besides, curcumin metal complexes have shown widespread application in medicine and can be exploited as lead structures for developing metal-based drugs. Unfortunately, curcumin is poorly bioavailable, mainly due to its instability in physiological conditions; this weakness is tightly connected to the presence of the β-diketo moiety undergoing tautomeric equilibrium. Stability and metal-chelating ability can be tuned by modulating the electronic effects and steric hindrance close to the β-diketo moiety; in addition, formation of a metal complex shifts the tautomeric equilibrium towards the β-keto–enol form and increases stability in biological media. Among the metals used in clinical therapy, gallium nitrate has shown to have significant antitumor activity against non-Hodgkin lymphoma and bladder cancer, thus indicating that gallium-based drugs have potential for further development as antineoplastic agents with improved therapeutic activity. Curcuminoids have demonstrated high affinity for gallium(III), allowing the formation of stable positively charged M:L 1:2 β-diketonate complexes that benefit from the therapeutic activity of both the metal and the ligand. Seven new curcumin derivatives were synthesized and completely characterized. The new derivatives retain the solvent-dependent keto–enol tautomerism, with the prevalence of the diketo form in aqueous solution. Enhanced stability in simulated physiological conditions was observed in comparison to the lead compound curcumin. The presence of Ga3+ anticipates the dissociation of the enolic proton, allowing chelate complex formation, and simultaneously it shifts the tautomeric equilibrium towards the keto–enol form. A complete 1H/13C NMR and UV–Vis study was performed to define the metal-to-ligand stoichiometry ratio and the overall stability constants. In addition, we demonstrated that some of the derivatives have increased antiproliferative activity on colon cancer cells compared to curcumin and antioxidant properties. On the whole, the synthesized curcumin-based molecules may act as new gallium(III) chelators with improved stability with respect to curcumin and could open interesting perspectives for the development of novel therapeutic agents for cancer.

Tautomers and Rotamers of Curcumin: A Combined UV Spectroscopy, High-Performance Liquid Chromatography, Ion Mobility Mass Spectrometry, and Electronic Structure Theory Study

The structures of tautomers and rotameric forms of curcumin, the bioactive compound present in spice plant turmeric, have been investigated using ion mobility mass spectrometry (IMMS) in conjunction with high-performance liquid chromatography (HPLC) and UV-visible spectroscopy. Two tautomeric forms of this β-diketone compound, keto-enol and diketo, have been chromatographically separated, and the electronic absorption spectra for these two tautomeric forms in methanol solution have been recorded separately for the first time. The molecular identity of the HPLC-separated solution fractions is established unambiguously by recording the mass and fragmentation spectra simultaneously. The ion mobility spectrum for the deprotonated curcumin anion, [Cur-H]^-, corresponding to the diketo tautomer, displays only one peak (P), and the collision cross-section (CCS) value is measured to be 185.9 Ų. However, the ion mobility spectrum corresponding to the HPLC-separated keto-enol tautomer shows three distinctly separated peaks, P, Q, and R, with CCS values of 185.9, 194.8, and 203.4 Ų, respectively, whereby peak R appears to be the most intense one, followed by peaks P and Q. The theoretically calculated CCS values of different isomers of [Cur-H]^-, optimized by electronic structure theory methods, display satisfactory correlation with the experimentally observed values, corroborating our assignments. The spectral attributes also indicate the occurrence of structural rearrangements in the electrospray ionization process. With the aid of the electronic structure calculation, low-energy pathways for the occurrence of the structural isomerization to surpass the energy barrier are suggested, which are consistent with the assignments of the peaks observed in the IM spectra.

Progress in 4D/5D/6D printing of foods: applications and R&D opportunities

4D printing is a result of 3D printing of smart materials which respond to diverse stimuli to produce novel products. 4D printing has been applied successfully to many fields, e.g., engineering, medical devices, computer components, food processing, etc. The last two years have seen a significant increase in studies on 4D as well as 5D and 6D food printing. This paper reviews and summarizes current applications, benefits, limitations, and challenges of 4D food printing. In addition, the principles, current, and potential applications of the latest additive manufacturing technologies (5D and 6D printing) are reviewed and discussed. Presently, 4D food printing applications have mainly focused on achieving desirable color, shape, flavor, and nutritional properties of 3D printed materials. Moreover, it is noted that 5D and 6D printing can in principle print very complex structures with improved strength and less material than do 3D and 4D printing. In future, these new technologies are expected to result in significant innovations in all fields, including the production of high quality food products which cannot be produced with current processing technologies. The objective of this review is to identify industrial potential of 4D printing and for further innovation utilizing 5D and 6D printing.

Antiradical properties of curcumin, caffeic acid phenethyl ester, and chicoric acid: a DFT study

The antiradical properties and possible mechanisms of action of the tautomers of curcumin, caffeic acid phenethyl ester (CAPE), and chicoric acid (CA) have been studied within density functional theory (DFT). We calculated global chemical reactivity descriptors from conceptual DFT, pK_a, bioavailability, and toxicity to evaluate the antiradical properties and characterize these species. Our final level of theory is the M06-2X functional with the 6-31 + G* basis set; we selected this level after performing a benchmark calibration and validation among different levels. Solvent effects were modeled via the continuum solvation model based on density (SMD). We used water and pentyl ethanoate as solvents to simulate the physiological conditions. The free radical scavenger capacity was analyzed for three possible oxidative stress mechanisms: single electron transfer (SET), hydrogen atom transfer (HAT), and xanthine oxidase (XO) inhibition. The results indicate that neutral curcumin, CA, and CAPE behave as antireductants. The most favorable mechanism turns out to be HAT, where CA and CAPE stand out. In conclusion, our DFT study strongly indicates that neutral curcumin, CAPE, and CA would very likely perform well as antiradical drugs with recommended therapeutic use, supported by their non-toxic nature.

Absorption Properties of Large Complex Molecular Systems: The DFTB/Fluctuating Charge Approach

We report on the first formulation of a novel polarizable QM/MM approach, where the density functional tight binding (DFTB) is coupled to the fluctuating charge (FQ) force field. The resulting method (DFTB/FQ) is then extended to the linear response within the TD-DFTB framework and challenged to study absorption spectra of large condensed-phase systems.

Mono-Dendronized β-Cyclodextrin Derivatives as Multitasking Containers for Curcumin. Impacting Its Solubility, Loading, and Tautomeric Form

In this study, three mono-dendronized β-cyclodextrin (βCD) derivatives (βCD-1G, βCD-2G, and βCD-3G) were used as multitasking containers of curcumin (CUR) to influence its aqueous solubility and tautomerism, both of which are related to its biological activity. We evaluated the relevant physicochemical properties of these containers associated with their potential hosting capacity. All mono-dendronized derivatives exhibited enhanced solubility in different solvents, including water, in comparison with native βCD. Gas-phase geometry optimizations by density functional theory (DFT) confirmed that none of the dendrons blocked the passage of CUR into the βCD cavity, and depending on the generation, different preorganization scenarios were promoted before complexation. Phase solubility diagrams showed that all the dendronized containers have superior performance for solubilizing CUR compared to native βCD. We proved that coprecipitation is most efficient than lyophilization for forming inclusion complexes (ICs) with dendronized containers. Even though βCD-3G with the largest 3G dendron exhibited the highest CUR loading, the complexation of CUR with βCD-2G provided the supramolecular system that contains CUR preferentially in its diketo tautomer, which is known for its antioxidant activity.

A Novel Curcumin-Based Drug Powder Inhalation Medicine for Chronic Obstructive Pulmonary Disease

The dry powder inhaler is a new form of drug delivery that is widely used as an alternative to traditional drug delivery methods, addressing the shortcomings of traditional drug delivery methods and obtaining better therapeutic results. This mode of delivery is also one of the most rational ways to treat pulmonary diseases such as chronic obstructive pulmonary disease (COPD). Curcumin, a natural polyphenol, has been shown to be effective in the treatment of COPD. In this study, different concentrations of curcumin ethanol solution were spray dried with mannitol as a carrier to obtain dry powder particles with different particle size distribution for the preparation of curcumin dry powder inhaler. The solubility and physicochemical properties were further characterized by differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy. The characterization results showed that the product obtained in the experiment had reasonable particle size distribution and excellent solubility properties, which were positive for the treatment of COPD or other pulmonary diseases.

Structural Studies of β-Diketones and Their Implications on Biological Effects

The paper briefly summarizes methods to determine the structure of β-diketones with emphasis on NMR methods. Density functional calculations are also briefly treated. Emphasis is on the tautomeric equilibria of β-diketones in relation to biological effects. Relevant physical parameters such as acidity and solubility are treated. A series of biologically active molecules are treated with respect to structure (tautomerism). Characteristic molecules or groups of molecules are usnic acids, tetramic and tetronic acids, o-hydroxydibenzoylmethanes, curcumines, lupulones, and hyperforines.

Thermodynamics and Intermolecular Interactions during the Insertion of Anionic Naproxen into Model Cell Membranes

The insertion process of Naproxen into model dimyristoylphosphatidylcholine (DMPC) membranes is studied by resorting to state-of-the-art classical and quantum mechanical atomistic computational approaches. Molecular dynamics simulations indicate that anionic Naproxen finds an equilibrium position right at the polar/nonpolar interphase when the process takes place in aqueous environments. With respect to the reference aqueous phase, the insertion process faces a small energy barrier of ≈5 kJ mol^-1 and yields a net stabilization of also ≈5 kJ mol^-1. Entropy changes along the insertion path, mainly due to a growing number of realizable microstates because of structural reorganization, are the main factors driving the insertion. An attractive fluxional wall of noncovalent interactions is characterized by all-quantum descriptors of chemical bonding (natural bond orbitals, quantum theory of atoms in molecules, noncovalent interaction, density differences, and natural charges). This attractive wall originates in the accumulation of tiny transfers of electron densities to the interstitial region between the fragments from a multitude of individual intermolecular contacts stabilizing the tertiary drug/water/membrane system.

An efficient and robust procedure to calculate absorption spectra of aqueous charged species applied to NO2. Phys Chem Chem Phys 2021;23:14857-14872. [PMID: 34223573 DOI: 10.1039/d1cp00652e]

Accurate calculation of absorption spectra of aqueous NO2- requires rigorously sampling the quantum potential energy surfaces for microsolvation of NO2- with at least five explicit water molecules and embedding the resulting clusters in a continuum solvent accounting for the statistical weighted contributions of individual isomers. This method, which we address as ASCEC + PCM, introduces several desired features when compared against MD simulations derived QM/MM spectra: comparatively fewer explicit solvent molecules to be treated with expensive QM methods, the identification of equilibrium structures in the quantum PES to be used in further vibrational spectroscopy, and the unequivocal identification of cluster orbitals undergoing electronic transitions and charge transfer that originate the spectral bands.

Photoactive Thin-Film Structures of Curcumin, TiO2 and ZnO

Curcumin is known as a biologically active compound and a possible antimicrobial agent. Here, we combine it with TiO2 and ZnO semiconductors, known for their photocatalytic properties, with an eye towards synergistic photo-harvesting and/or antimicrobial effects. We deposit different nanoscale multi-layer structures of curcumin, TiO2 and ZnO, by combining the solution-based spin-coating (S-C) technique and the gas-phase atomic layer deposition (ALD) and molecular layer deposition (MLD) thin-film techniques. As one of the highlights, we demonstrate for these multi-layer structures a red-shift in the absorbance maximum and an expansion of the absorbance edge as far as the longest visible wavelength region, which activates them for the visible light harvesting. The novel fabrication approaches introduced here should be compatible with, e.g., textile substrates, opening up new horizons for novel applications such as new types of protective masks with thin conformal antimicrobial coatings.

Modeling solvation effects on absorption and fluorescence spectra of indole in aqueous solution

Modeling the optical spectra of molecules in solution presents a challenge, so it is important to understand which of the solvation effects (i.e., electrostatics, mutual polarization, and hydrogen bonding interactions between solute and solvent molecules) are crucial in reproducing the various features of the absorption and fluorescence spectra and to identify a sufficient theoretical model that accurately captures these effects with minimal computational cost. In this study, we use various implicit and explicit solvation models, such as molecular dynamics coupled with non-polarizable and polarizable force fields, as well as Car-Parrinello molecular dynamics, to model the absorption and fluorescence spectra of indole in aqueous solution. The excited states are computed using the equation of motion coupled cluster with single and double excitations combined with the effective fragment potential to represent water molecules, which we found to be a computationally efficient approach for modeling large solute-solvent clusters at a high level of quantum theory. We find that modeling mutual polarization, compared to other solvation effects, is a dominating factor for accurately reproducing the position of the peaks and spectral line shape of the absorption spectrum of indole in solution. We present an in-depth analysis of the influence that different solvation models have on the electronic excited states responsible for the features of the absorption spectra. Modeling fluorescence is more challenging since it is hard to reproduce even the correct emitting state, and force field parameters need to be re-evaluated.

Simulating Absorption Spectra of Flavonoids in Aqueous Solution: A Polarizable QM/MM Study

We present a detailed computational study of the UV/Vis spectra of four relevant flavonoids in aqueous solution, namely luteolin, kaempferol, quercetin, and myricetin. The absorption spectra are simulated by exploiting a fully polarizable quantum mechanical (QM)/molecular mechanics (MM) model, based on the fluctuating charge (FQ) force field. Such a model is coupled with configurational sampling obtained by performing classical molecular dynamics (MD) simulations. The calculated QM/FQ spectra are compared with the experiments. We show that an accurate reproduction of the UV/Vis spectra of the selected flavonoids can be obtained by appropriately taking into account the role of configurational sampling, polarization, and hydrogen bonding interactions.

Optical Absorption of Atomically-Precise Sn14 Nanoclusters: The Antagonistic Interplay of Ligand Stabilization, Molecular Symmetry, and Solvatochromism

The synthesis of atomically precise clusters is nowadays well established. The study of isolated clusters in the gas phase has also become an approved field of research. Although both approaches examine the same research objects, namely nanoclusters, little is known about to what extent results from gas phase studies can be transferred to colloidal systems and vice versa. In particular, it is not yet sufficiently understood how ligands influence the geometric and electronic structure of clusters from an experimental point of view. By comparing a ligand-stabilized tin nanocluster in solution with an isolated species in the gas phase and considering different geometric arrangements with the same number of tin atoms, the impacts of ligand stabilization, molecular symmetry, and solvatochromism on the optical behavior are thoroughly worked out for the first time.

Absorption spectra of xanthines in aqueous solution: a computational study

We present a detailed computational analysis of the UV/Vis spectra of caffeine, paraxanthine and theophylline in aqueous solution. A hierarchy of solvation approaches for modeling the aqueous environment have been tested, ranging from the continuum model to the non-polarizable and polarizable quantum mechanical (QM)/molecular mechanics (MM) models, with and without the explicit inclusion of water molecules in the QM portion. The computed results are directly compared with the experimental data, thus highlighting the role of electrostatic, polarization and hydrogen boding solute-solvent interactions.

Reaction-diffusion model as framework for understanding the role of riboflavin in “eye defence” formulations

Analysis of UV-visible spectra, performed on commercial riboflavin-based eye drops, showed that absorbance is a saturating function of vitamin concentration. This implies a threshold concentration, C_t, such that for riboflavin concentration > C_t the absorbance remains constant and the effectiveness of the eye drops is independent of the dose used. These experimental results were combined with a diffusion–reaction model to elucidate the mechanism of action within the cornea. The model predicts that the eye drops have a low effectiveness on UVB and UVC, while they have a good performance for UVA. Indeed, at the center of the cornea the transmittance is significantly reduced and after 1 h it is reduced by about 70% compared to a cornea devoid of eye drops.

Analysis of UV-visible spectra, performed on commercial riboflavin-based eye drops, showed that absorbance is a saturating function of vitamin concentration.

Electronic transitions for a fully polarizable QM/MM approach based on fluctuating charges and fluctuating dipoles: Linear and corrected linear response regimes

The fully polarizable Quantum Mechanics/Molecular Mechanics (QM/MM) approach based on fluctuating charges and fluctuating dipoles, named QM/FQFμ [T. Giovannini et al., J. Chem. Theory Comput. 15, 2233 (2019)], is extended to the calculation of vertical excitation energies of solvated molecular systems. Excitation energies are defined within two different solvation regimes, i.e., linear response (LR), where the response of the MM portion is adjusted to the QM transition density, and corrected-Linear Response (cLR) in which the MM response is adjusted to the relaxed QM density, thus being able to account for charge equilibration in the excited state. The model, which is specified in terms of three physical parameters (electronegativity, chemical hardness, and polarizability) is applied to vacuo-to-water solvatochromic shifts of aqueous solutions of para-nitroaniline, pyridine, and pyrimidine. The results show a good agreement with their experimental counterparts, thus highlighting the potentialities of this approach.