Activated graphene as a material for supercapacitor electrodes: effects of surface area, pore size distribution and hydrophilicity

Experimental and theoretical insights into the supercapacitive performance of interconnected WS2 nanosheets

Transition metal dichalcogenides (TMDs) are fascinating and prodigious considerations in the electrochemical energy storage sector because of their two dimensional chemistry as well as heterogeneous characteristics. Herein, we synthesized interconnected WS2 nanosheets by a hydrothermal method followed by sulphuration at 850 °C in an argon atmosphere. The ultrathin WS2 nanosheet array is endowed with an excellent specific capacitance of 74 F g-1 at the current density of 3 A g-1 up 7000 cycles. Moreover, a symmetric supercapacitor was fabricated using WS2 nanosheets, which provided the admirable high specific capacity of 6.3 F g-1 at 0.05 A g-1 with the energy and power density of 5.6 × 102 mW h kg-1 and 3.6 × 10 5 mW kg-1, respectively. Density functional theory (DFT) simulations revealed the presence of populated energy states near the Fermi level resulting in a high quantum capacitance value, which supports the experimentally achieved high capacitance value. The attained results recommend interconnected WS2 nanosheets as a novel, robust, and low-cost electrode material for supercapacitor energy storage devices.

Super-oxidized "activated graphene" as 3D analogue of defect graphene oxide: Oxidation degree vs U(VI) sorption

Porous carbons are not favorable for sorption of heavy metals and radionuclides due to absence of suitable binding sites. In this study we explored the limits for surface oxidation of "activated graphene" (AG), porous carbon material with the specific surface area of ∼2700 m²/g produced by activation of reduced graphene oxide (GO). Set of "Super-Oxidized Activated Graphene" (SOAG) materials with high abundance of carboxylic groups on the surface were produced using "soft" oxidation. High degree of oxidation comparable to standard GO (C/O=2.3) was achieved while keeping 3D porous structure with specific surface area of ∼700-800 m²/. The decrease in surface area is related to the oxidation-driven collapse of mesopores while micropores showed higher stability. The increase in the oxidation degree of SOAG is found to result in progressively higher sorption of U(VI), mostly related to the increase in abundance of carboxylic groups. The SOAG demonstrated extraordinarily high sorption of U(VI) with the maximal capacity up to 5400 μmol/g, that is 8.4 - fold increase compared to non-oxidized precursor AG, ∼50 -fold increase compared to standard graphene oxide and twice higher than extremely defect-rich graphene oxide. The trends revealed here show a way to further increase sorption if similar oxidation degree is achieved with smaller sacrifice of surface area.

Activated carbons with extremely high surface area produced from cones, bark and wood using the same procedure

Activated carbons have been previously produced from a huge variety of biomaterials often reporting advantages of using certain precursors. Here we used pine cones, spruce cones, larch cones and a pine bark/wood chip mixture to produce activated carbons in order to verify the influence of the precursor on properties of the final materials. The biochars were converted into activated carbons with extremely high BET surface area up to ∼3500 m² g^-1 (among the highest reported) using identical carbonization and KOH activation procedures. The activated carbons produced from all precursors demonstrated similar specific surface area (SSA), pore size distribution and performance to electrodes in supercapacitors. Activated carbons produced from wood waste appeared to be also very similar to "activated graphene" prepared by the same KOH procedure. Hydrogen sorption of AC follows expected uptake vs. SSA trends and energy storage parameters of supercapacitor electrodes prepared from AC are very similar for all tested precursors. It can be concluded that the type of precursor (biomaterial or reduced graphene oxide) has smaller importance for producing high surface area activated carbons compared to details of carbonization and activation. Nearly all kinds of wood waste provided by the forest industry can possibly be converted into high quality AC suitable for preparation of electrode materials.

Sorption of Polar Sorbents into GO Powders and Membranes

The comparative study of sorption of polar substances acetonitrile and water into powders and membranes (>10 μm thick) of modified Hummers (HGO) and Brodie (BGO) graphite oxides was performed using isopiestic method (IM) and differential scanning calorimetry (DSC). Additional sorption data were obtained for pyridine and 1-octanol. Sorption measurements were accompanied by conventional XRD and XPS control. Electron paramagnetic resonance (EPR) was additionally used to characterize ordering of the membranes. The impact on sorption of synthetic procedure (Brodie or Hummers), method of making membranes, chemical nature of the sorbent, and method of sorption was systematically examined. It was demonstrated that variations in synthetic procedures within both Hummers and Brodie methods did not lead to changes in the sorption properties of the corresponding powders. Sorption of acetonitrile and pyridine was reduced by approximately half when switching from powders to membranes at ambient temperature. DSC measurements at a lower temperature gave equal sorption of acetonitrile into HGO powder and membranes. Water has demonstrated unique sorption properties. Equal sorption of water was measured for HGO membranes and powders at T = 298 K and at T = 273 K. It was demonstrated that lowering the orientational alignment of the membranes led to the increase of sorption. In practice this could allow one to tune sorption/swelling and transport properties of the GO membranes directly by adjusting their internal ordering without the use of any composite materials.

High-surface-area activated carbon from pine cones for semi-industrial spray deposition of supercapacitor electrodes

High surface area carbons are so far the best materials for industrial manufacturing of supercapacitor electrodes. Here we demonstrate that pine cones, an abundant bio-precursor currently considered as a waste in the wood industry, can be used to prepare activated carbons with a BET surface area exceeding 3000 m² g^-1. It is found that the same KOH activation procedure applied to reduced graphene oxide (rGO) and pine cone derived biochars results in carbon materials with a similar surface area, pore size distribution and performance in supercapacitor (SC) electrodes. It can be argued that "activated graphene" and activated carbon are essentially the same kind of material with a porous 3D structure. It is demonstrated that the pine cone derived activated carbon (PC-AC) can be used as a main part of aqueous dispersions stabilized by graphene oxide for spray deposition of electrodes. The PC-AC based electrodes prepared using a semi-industrial spray gun machine and laboratory scale blade deposition of these dispersions were compared to pellet electrodes.

Sustainable Preparation of Nanoporous Carbons via Dry Ball Milling: Electrochemical Studies Using Nanocarbon Composite Electrodes and a Deep Eutectic Solvent as Electrolyte

The urgent need to reduce the consumption of fossil fuels drives the demand for renewable energy and has been attracting the interest of the scientific community to develop materials with improved energy storage properties. We propose a sustainable route to produce nanoporous carbon materials with a high-surface area from commercial graphite using a dry ball-milling procedure through a systematic study of the effects of dry ball-milling conditions on the properties of the modified carbons. The microstructure and morphology of the dry ball-milled graphite/carbon composites are characterized by BET (Brunauer-Emmett-Teller) analysis, SEM (scanning electron microscopy), ATR-FTIR (attenuated total reflectance-Fourier transform infrared spectroscopy) and Raman spectroscopy. As both the electrode and electrolyte play a significant role in any electrochemical energy storage device, the gravimetric capacitance was measured for ball-milled material/glassy carbon (GC) composite electrodes in contact with a deep eutectic solvent (DES) containing choline chloride and ethylene glycol as hydrogen bond donor (HBD) in a 1:2 molar ratio. Electrochemical stability was tracked by measuring charge/discharge curves. Carbons with different specific surface areas were tested and the relationship between the calculated capacitance and the surface treatment method was established. A five-fold increase in gravimetric capacitance, 25.27 F·g-1 (G40) against 5.45 F·g-1, was found for commercial graphene in contact with DES. Optimal milling time to achieve a higher surface area was also established.

Binary vanadium pentoxide carbon-graphene foam composites derived from dark red hibiscus sabdariffa for advanced asymmetric supercapacitor

The development of advanced electrode materials derived from biomass for the next generation of energy storage devices, such as supercapacitors with high specific energy and specific power coupled with a good cycle stability, is required to meet the high demand for electric vehicles and portable devices. In this study, sustainable binary vanadium pentoxide carbon-graphene foam composites (V₂O₅@C-R₂HS/GF) were synthesized using a solvothermal method. The X-ray diffraction, Raman and FTIR techniques were used to study the structural properties of the composites (V₂O₅@C-R₂HS/20 mg GF and V₂O₅@C-R₂HS/40 mg GF). The SEM micrographs displayed an accordion-like morphology resulting from the graphene foam-modified V₂O₅@C-R₂HS composite. The V₂O₅@C-R₂HS, V₂O₅@C-R₂HS/20 mg GF and V₂O₅@C-R₂HS/40 mg GF composites were evaluated in a three-electrode configuration using 6 M potassium hydroxide (KOH) as an aqueous electrolyte. Furthermore, a two-electrode device was carried out by fabricating an asymmetric device (V₂O₅@C-R₂HS/GF//AC) where V₂O₅@C-R₂HS/20 mg GF was used as a positive electrode and activated carbon (AC) as a negative electrode at a cell voltage of 1.6 V in 6 M KOH. The V₂O₅@C-R₂HS/GF//AC showed a high specific energy and specific power values of 55 W h kg^-1 and 707 W kg^-1, respectively, at a specific current of 1 A g^-1. The asymmetric device presented a good stability test showing 99% capacity retention up to 10 000 cycles and was confirmed by the floating time up to 150 h with specific energy increasing 23.6% after the first 10 h. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 2)'.

Facile Fabrication of MnO2/Graphene/Ni Foam Composites for High-Performance Supercapacitors

A novel MnO2/graphene/Ni foam electrode was fabricated via the impregnation and electrochemical deposition technique with Ni foams serving as substrates and graphene serving as a buffer layer for the enhanced conductivity of MnO2. The samples were characterized using X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Compared with other methods, our strategy avoids using surfactants and high-temperature treatments. The electrodes exhibited excellent electrochemical performance, high capabilities, and a long cycle life. Various electrochemical properties were systematically studied using cyclic voltammetry and electrochemical impedance spectroscopy. The results showed that the specific capacitance of the MnO2/graphene/Ni composite prepared at 1 mA cm-2 of electrodeposition could achieve a scan rate of 10 mV s-1 at 292.8 F g-1, which confirmed that the graphene layer could remarkably improve electron transfer at the electrolyte-electrode interface. The capacitance retention was about 90% after 5000 cycles. Additionally, a MnO2/graphene//graphene asymmetric supercapacitor was assembled and it exhibited a high-energy density of 91 Wh kg-1 as well as had an excellent power density of 400 W kg-1 at 1 A g-1. It is speculated that the strong adhesion between the graphene and MnO2 can provide a compact structure to enhance the mechanical stability, which can be applied as a new method for energy storage devices.

Understanding the Adsorption Capacity for CO2 in Reduced Graphene Oxide (rGO) and Modified Ones with Different Heteroatoms in Relation to Surface and Textural Characteristics

Reduced graphene oxide is a material that has a variety of applications, especially in CO2 adsorption. The study of this research is the preparation of reduced graphene oxide with different heteroatoms and how the adsorption capacity is changed. The functionalization with other compounds bearing Si, S, N, and O was before reducing graphene oxide. Different monoliths were prepared by changing the ascorbic acid analogy and the temperature of reduction. The different porosity values, percentages of heteroatoms, and synthetic parameters show that the adsorption capacity is a complex procedure that can be affected by multiple parameters. Microporosity, different functionalities from heteroatoms, and high surface/volume of pores are the significant parameters that affect adsorption. All parameters should establish a balance among all parameters to achieve high adsorption of CO2.

Swelling properties of graphite oxides and graphene oxide multilayered materials

Graphite oxide (GtO) and graphene oxide (GO) multilayered laminates are hydrophilic materials easily intercalated by water and other polar solvents. By definition, an increase in the volume of a material connected to the uptake of a liquid or vapour is named swelling. Swelling is a property which defines graphite oxides and graphene oxides. Less oxidized materials not capable of swelling should be named oxidized graphene. The infinite swelling of graphite oxide yields graphene oxide in aqueous dispersions. Graphene oxide sheets dispersed in a polar solvent can be re-assembled into multilayered structures and named depending on applications as films, papers or membranes. The multilayered GO materials exhibit swelling properties which are mostly similar to those of graphite oxides but not identical and in some cases surprisingly different. Swelling is a key property of GO materials in all applications which involve the sorption of water/solvents from vapours, immersion of GO into liquid water/solvents and solution based chemical reactions. These applications include sensors, sorption/removal of pollutants from waste waters, separation of liquid and gas mixtures, nanofiltration, water desalination, water-permeable protective coatings, etc. Swelling defines the distance between graphene oxide sheets in solution-immersed GO materials and the possibility for penetration of ions and molecules inside of interlayers. A high sorption capacity of GO towards many molecules and cations is defined by swelling which makes the very high surface area of GO accessible. GtO and GO swelling is a surprisingly complex phenomenon which is manifested in a variety of different ways. Swelling is strongly different for materials produced using the most common Brodie and Hummers oxidation procedures; it depends on the degree of oxidation, ad temperature and pressure conditions. The value of the GO interlayer distance is especially important in membrane applications. Diffusion of solvent molecules and ions is defined by the size of "permeation channels" provided by the swelled GO structure. According to extensive studies performed over the last decade the exact value of the inter-layer distance in swelled GO depends on the nature of solvent, temperature and pressure conditions, and the pH and concentration of solutions and exhibits pronounced aging effects. This review provides insight into the fundamental swelling properties of multilayered GO and demonstrates links to advanced applications of these materials.

From 2D Graphene Nanosheets to 3D Graphene-based Macrostructures

The combination of exceptional functionalities offered by 3D graphene-based macrostructures (GBMs) has attracted tremendous interest. 2D graphene nanosheets have a high chemical stability, high surface area and customizable porosity, which was extensively researched for a variety of applications including CO₂ adsorption, water treatment, batteries, sensors, catalysis, etc. Recently, 3D GBMs have been successfully achieved through few approaches, including direct and non-direct self-assembly methods. In this review, the possible routes used to prepare both 2D graphene and interconnected 3D GBMs are described and analyzed regarding the involved chemistry of each 2D/3D graphene system. Improvement of the accessible surface of 3D GBMs where the interface exchanges are occurring is of great importance. A better control of the chemical mechanisms involved in the self-assembly mechanism itself at the nanometer scale is certainly the key for a future research breakthrough regarding 3D GBMs.

Sustainable Biomass Activated Carbons as Electrodes for Battery and Supercapacitors-A Mini-Review

Some recent developments in the preparation of biomass carbon electrodes (CEs) using various biomass residues for application in energy storage devices, such as batteries and supercapacitors, are presented in this work. The application of biomass residues as the primary precursor for the production of CEs has been increasing over the last years due to it being a renewable source with comparably low processing cost, providing prerequisites for a process that is economically and technically sustainable. Electrochemical energy storage technology is key to the sustainable development of autonomous and wearable electronic devices. This article highlights the application of various types of biomass in the production of CEs by using different types of pyrolysis and experimental conditions and denotes some possible effects on their final characteristics. An overview is provided on the use of different biomass types for the synthesis of CEs with efficient electrochemical properties for batteries and supercapacitors. This review showed that, from different biomass residues, it is possible to obtain CEs with different electrochemical properties and that they can be successfully applied in high-performance batteries and supercapacitors. As the research and development of producing CEs still faces a gap by linking the type and composition of biomass residues with the carbon electrodes' electrochemical performances in supercapacitor and battery applications, this work tries to diminish this gap. Physical and chemical characteristics of the CEs, such as porosity, chemical composition, and surface functionalities, are reflected in the electrochemical performances. It is expected that this review not only provides the reader with a good overview of using various biomass residues in the energy storage applications, but also highlights some goals and challenges remaining in the future research and development of this topic.

Skeleton-Structure WS2@CNT Thin-Film Hybrid Electrodes for High-Performance Quasi-Solid-State Flexible Supercapacitors

The purpose of this work is to explore the application prospects of WS₂ as an active material in flexible electrodes. Since WS₂ has similar disadvantages as other two-dimensional layered materials, such as easily stacking, it is essential to develop a three-dimensional structure for its assembly in terms of electrochemical performance. In addition, the low conductivity of WS₂ limits its application as flexible electrode material. In order to solve these problems, carbon nanotubes (CNTs) are introduced to improve the conductivity of hybrid WS₂ materials and to construct a skeleton structure during WS₂ assembly. Compared with pure CNTs and WS₂, the WS₂@CNT thin-film hybrid with a unique skeleton structure has a high specific area capacitance that reaches a maximum of 752.53 mF/cm² at a scan rate 20 mV/s. Meanwhile, this hybrid electrode material shows good stability, with only 1.28% loss of its capacitance over 10,000 cycles. In order to prove its feasibility for practical application, a quasi-solid-state flexible supercapacitor is assembled, and its electrochemical characteristics (the specific area capacitance is 574.65 mF/cm²) and bendability (under bending to 135° 10, 000 times, 23.12% loss at a scan rate of 100 mV/s) are further investigated and prove its potential in this field.

Aqueous Activated Graphene Dispersions for Deposition of High-Surface Area Supercapacitor Electrodes

High-surface area activated graphene has a three-dimensional porous structure that makes it difficult to prepare dispersions. Here we report a general approach that allows the preparatioon of stable water-based dispersions/inks at concentrations of ≲20 mg/mL based on activated graphene using environmentally friendly formulations. Simple drying of the dispersion on the substrate allows the preparation of electrodes that maintain the high specific surface area of the precursor material (∼1700 m²/g). The electrodes are flexible because of the structure that consists of micrometer-sized activated graphene grains interconnected by carbon nanotubes (CNTs). The electrodes prepared using activated graphene demonstrate performance superior to that of reduced graphene oxide in supercapacitors with KOH and TEA BF₄/acetonitrile electrolytes providing specific capacitance values of 180 and 137 F/g, respectively, at a specific current of 1 A/g. The high surface area of activated graphene in combination with the good conductivity of CNTs allows an energy density of 35.6 Wh/kg and a power density of 42.2 kW/kg to be achieved. The activated graphene dispersions were prepared in liter amounts and are compatible with most industrial deposition methods.

One-Step Synthesis of Graphene, Copper and Zinc Oxide Graphene Hybrids via Arc Discharge: Experiments and Modeling

In this paper, we report on a modified arc process to synthetize graphene, copper and zinc oxide graphene hybrids. The anode was made of pure graphite or graphite mixed with metals or metal oxides. After applying a controlled direct current, plasma is created in the interelectrode region and the anode is consumed by eroding. Continuous and abundant flux of small carbon, zinc or copper species, issued from the anode at a relatively high temperature, flows through the plasma and condenses in the vicinity of a water-cooled cathode leading to few-layered graphene sheets and highly ordered carbon structures. When the graphite rod is filled with copper or zinc oxide nanoparticles, few layers of curved graphene films were anchored with spherical Cu and ZnO nanoparticles leading to a one-step process synthesis of graphene hybrids, which combine the synergetic properties of graphene along with nanostructured metals or semiconducting materials. The as-prepared samples were characterized by Raman spectroscopy, X-ray diffraction (XRD), spatially resolved electron energy loss spectroscopy (EELS), energy filtered elemental mapping and transmission electron microscopy (TEM). In addition to the experimental study, numerical simulations were performed to determine the velocity, temperature and chemical species distributions in the arc plasma under specific graphene synthesis conditions, thereby providing valuable insight into growth mechanisms.

Thermally reduced pillared GO with precisely defined slit pore size

Graphene oxide (GO) pillared with tetrakis(4-aminophenyl)methane (TKAM) molecules shows a narrow distribution of pore size, relatively high specific surface area, but it is hydrophilic and electrically not conductive. Analysis of XRD, N₂ sorption, XPS, TGA and FTIR data proved that the pillared structure and relatively high surface area (∼350 m² g⁻¹) are preserved even after thermal reduction of GO pillared with TKAM molecules. Unlike many other organic pillaring molecules, TKAM is stable at temperatures above the point of GO thermal reduction, as demonstrated by TGA. Therefore, gentle annealing results in the formation of reduced graphene oxide (rGO) pillared with TKAM molecules. The TKAM pillared reduced graphene oxide (PrGO/TKAM) is less hydrophilic as found using dynamic vapor sorption (DVS) and more electrically conductive compared to pillared GO, but preserves an increased interlayer-distance of about 12 Å (compared to ∼7.5 Å in pristine GO). Thus we provide one of the first examples of porous rGO pillared with organic molecules and well-defined size of hydrophobic slit pores. Analysis of pore size distribution using nitrogen sorption isotherms demonstrates a single peak for pore size of ∼7 Å, which makes PrGO/TKAM rather promising for membrane and molecular sieve applications.

The porous structure of tetrakis(4-aminophenyl)methane (TKAM)-pillared graphene oxide preserves after thermal reduction providing rare example of true pillared reduced GO material with precise slit pore size and sizable surface area.