Photoactive properties of supramolecular assembled short peptides

Light-triggered AND logic tetrapeptide dynamic covalent assembly

We demonstrate light-triggered dynamic covalent assembly of a linear short tetrapeptide containing two terminal cysteine residues in an AND logic manner. A photobase generator is introduced to accomplish light-mediated pH regulation to increase the reduction potential of thiols in the tetrapeptide, which activates its oxidative polymerization through disulfide bonds. Interestingly, it is elucidated that under light irradiation, mere co-existence of photobase generator and the oxidizing agent permits the polymerization performance of this tetrapeptide. Hence, a light-triggered AND logic dynamic covalent assembly of a tetrapeptide is achieved. Further, upon redox response, the reversible aggregation and disaggregation can be transformed for numerous times due to the dynamic covalent feature of disulfide bond. As a comparison, no assembly occurs for a short peptide containing one terminal cysteine residue under the same stimuli condition. This work offers a new approach to remotely control programmable molecular assembly of short linear peptides based on dynamic covalent bond, holding great potential in wide bioapplications.

Self-assembly of peptides in living cells for disease theranostics

The past few decades have witnessed substantial progress in biomedical materials for addressing health concerns and improving disease therapeutic and diagnostic efficacy. Conventional biomedical materials are typically created through an ex vivo approach and are usually utilized under physiological environments via transfer from preparative media. This transfer potentially gives rise to challenges for the efficient preservation of the bioactivity and implementation of theranostic goals on site. To overcome these issues, the in situ synthesis of biomedical materials on site has attracted great attention in the past few years. Peptides, which exhibit remarkable biocompability and reliable noncovalent interactions, can be tailored via tunable assembly to precisely create biomedical materials. In this review, we summarize the progress in the self-assembly of peptides in living cells for disease diagnosis and therapy. After a brief introduction to the basic design principles of peptide assembly systems in living cells, the applications of peptide assemblies for bioimaging and disease treatment are highlighted. The challenges in the field of peptide self-assembly in living cells and the prospects for novel peptide assembly systems towards next-generation biomaterials are also discussed, which will hopefully help elucidate the great potential of peptide assembly in living cells for future healthcare applications.

Peptide Supramolecular Self-Assembly: Regulatory Mechanism, Functional Properties, and Its Application in Foods

Peptide self-assembly, due to its diverse supramolecular nanostructures, excellent biocompatibility, and bright application prospects, has received wide interest from researchers in the fields of biomedicine and green life technology and the food industry. Driven by thermodynamics and regulated by dynamics, peptides spontaneously assemble into supramolecular structures with different functional properties. According to the functional properties derived from peptide self-assembly, applications and development directions in foods can be found and explored. Therefore, in this review, the regulatory mechanism is elucidated from the perspective of self-assembly thermodynamics and dynamics, and the functional properties and application progress of peptide self-assembly in foods are summarized, with a view to more adaptive application scenarios of peptide self-assembly in the food industry.

Controlled Assembly and Disassembly of Higher-Order Peptide Nanotubes

The controlled peptide self-assembly and disassembly are not only implicated in many cellular processes but also possess huge application potential in a wide range of biotechnology and biomedicine. β-sheet peptide assemblies possess high kinetic stability, so it is usually hard to disassemble them rapidly. Here, we reported that both the self-assembly and disassembly of a designed short β-sheet peptide IIIGGHK could be well harnessed through the variations of concentration, pH, and mechanical stirring. Microscopic imaging, neutron scattering, and infrared spectroscopy were used to track the assembly and disassembly processes upon these stimuli, especially the interconversion between thin, left-handed protofibrils and higher-order nanotubes with superstructural right-handedness. The underlying rationale for these controlled disassembly processes mainly lies in the fact that the specific His-His interactions between protofibrils were responsive to these stimuli. By taking advantage of the peptide self-assembly and disassembly, the encapsulation of the hydrophobic drug curcumin and its rapid release upon stimuli were achieved. Additionally, the peptide hydrogels facilitated the differentiation of neural cells while maintaining low cell cytotoxicity. We believe that such dynamic and reversible structural transformation in this work provides a distinctive paradigm for controlling the peptide self-assembly and disassembly, thus laying a foundation for practical applications of peptide assemblies.

Molecular Nanoarchitectonics of Natural Photosensitizers and Their Derivatives Nanostructures for Improved Photodynamic Therapy

Natural photosensitizers (PSs) and their derivatives have drawn ever-increasing attention in photodynamic therapy (PDT) for their wild range of sources, desirable biocompatibility, and good photosensitivity. Nevertheless, many factors such as poor solubility, high body clearance rate, limited tumor targeting ability, and short excitation wavelengths severely hinder their applications in efficient PDT. In recent years, fabricating nanostructures by utilizing molecular assembly technique is proposed to solve these problems. This technique is easy to put into effect, and the assembled nanostructures could improve the physical properties of the PSs so as to meet the requirement of PDT. In this concept, we focus on the construction of natural PSs and their derivatives nanostructures through molecular assembly technique to enhance PDT efficacy (Figure 1). Furthermore, current challenges and future perspectives of natural PSs and their derivatives for efficient PDT are discussed.

Stimuli-responsive peptide hydrogels for biomedical applications

Stimuli-responsive hydrogels can respond to external stimuli with a change in the network structure and thus have potential application in drug release, intelligent sensing, and scaffold construction. Peptides possess robust supramolecular self-assembly ability, enabling spontaneous formation of nanostructures through supramolecular interactions and subsequently hydrogels. Therefore, peptide-based stimuli-responsive hydrogels have been widely explored as smart soft materials for biomedical applications in the last decade. Herein, we present a review article on design strategies and research progress of peptide hydrogels as stimuli-responsive materials in the field of biomedicine. The latest design and development of peptide hydrogels with responsive behaviors to stimuli are first presented. The following part provides a systematic overview of the functions and applications of stimuli-responsive peptide hydrogels in tissue engineering, drug delivery, wound healing, antimicrobial treatment, 3D cell culture, biosensors, etc. Finally, the remaining challenges and future prospects of stimuli-responsive peptide hydrogels are proposed. It is believed that this review will contribute to the rational design and development of stimuli-responsive peptide hydrogels toward biomedical applications.

Self-Assembly of a Novel Pentapeptide into Hydrogelated Dendritic Architecture: Synthesis, Properties, Molecular Docking and Prospective Applications

Currently, ultrashort oligopeptides consisting of fewer than eight amino acids represent a cutting-edge frontier in materials science, particularly in the realm of hydrogel formation. By employing solid-phase synthesis with the Fmoc/tBu approach, a novel pentapeptide, FEYNF-NH2, was designed, inspired by a previously studied sequence chosen from hen egg-white lysozyme (FESNF-NH2). Qualitative peptide analysis was based on reverse-phase high performance liquid chromatography (RP-HPLC), while further purification was accomplished using solid-phase extraction (SPE). Exact molecular ion confirmation was achieved by matrix-assisted laser desorption-ionization mass spectrometry (MALDI-ToF MS) using two different matrices (HCCA and DHB). Additionally, the molecular ion of interest was subjected to tandem mass spectrometry (MS/MS) employing collision-induced dissociation (CID) to confirm the synthesized peptide structure. A combination of research techniques, including Fourier-transform infrared spectroscopy (FTIR), fluorescence analysis, transmission electron microscopy, polarized light microscopy, and Congo red staining assay, were carefully employed to glean valuable insights into the self-assembly phenomena and gelation process of the modified FEYNF-NH2 peptide. Furthermore, molecular docking simulations were conducted to deepen our understanding of the mechanisms underlying the pentapeptide's supramolecular assembly formation and intermolecular interactions. Our study provides potential insights into amyloid research and proposes a novel peptide for advancements in materials science. In this regard, in silico studies were performed to explore the FEYNF peptide's ability to form polyplexes.

Titanium dioxide nanoparticles embedded in assembled dipeptide hydrogels for microfluidic photodegradation

Dipeptides can be self-assembled via non-covalent bonds towards functional nanostructures for diverse applications in nanotechnology. Here, we introduce a convenient microfluidics-guided dipeptide design as a platform for photodegradation of contaminants in water. Titanium dioxide (TiO2) nanoparticles (NPs) are chosen as photocatalysts due to their vastly studied properties. By using a well-defined microchannel architecture, the dipeptide N-fluorenylmethoxycarbonyl diphenylalanine (Fmoc-FF) and TiO2 NPs are efficiently mixed leading to a self-assembled Fmoc-FF hydrogel with embedded TiO2. Owing to shear-thinning and rapid self-healing of Fmoc-FF hydrogels, we can transfer and inject Fmoc-FF/TiO2 hydrogels into any other microdevice for specific applications, where these low-molecular-weight-gelator- (LMWG-)based Fmoc-FF hydrogels fill out the microchannel volume. Different morphologies of Fmoc-FF/TiO2 hydrogels are obtained by simple concentration screening of TiO2 NPs and Fmoc-FF. Owing to the density of the three-dimensionally twined Fmoc-FF nanofibers, solutions swelling the dipeptide hydrogel can be exchanged without leaching out TiO2 NPs. By further analysis, our hydrogel-filled flow cell can be employed for continuous-flow photodegradation in water under light irradiation. Especially, compared to the TiO2 NPs suspension, Fmoc-FF/TiO2 hydrogels with relatively low concentrations of TiO2 exhibit enhanced photodegradation capabilities due to better dispersion of nanoparticles. Such strategy provides a versatile platform for embedment of small inorganic catalysts or enzymes for (bio-)chemical conversion of solutes passing through the hydrogel network.

Stereogenic Harmony Fabricated Mechanoresponsive Homochiral Triphenylalanine Analogues with Synergistic Antibacterial Performances: A Potential Weapon for Dermal Wound Management

The wound recovery phenomenon remains as one of the long challenging concerns worldwide. In search of user-friendly dressing materials, in this report, we fabricated a rational combinatorial strategy utilizing stereogenic harmony in a triphenylalanine fragment and appending it to δ-amino valeric acid at the N-terminus (hydrogelators I-VII) such that a potential scaffold could be fished out from the design. Our investigations revealed that all the hydrogelators displayed not only excellent self-healing performance as well as high mechanical strength at physiological pH but also mechanical stress-triggered gel-sol-gel transition properties. The structural and morphological investigation confirmed the presence of β-sheet-like assemblies stabilized by intermolecular H-bonding and π-π interactions. Moreover, these scaffolds showed substantial antibacterial as well as antifungal efficacy against common wound pathogens, i.e, four Gram-positive bacteria (Staphylococcus aureus, Streptococcus mutans, B. subtilis, E. fecalis), four Gram-negative bacteria (Escherichia coli, Klebsiella pneumonia, P. aerugonosa, Proteus spp.), and two fungal strains (C. albicans and A. niger). The manifestation of consistent antioxidant properties might be due to the enhancement of amphiphilicity in hydrogelators, which has led to the generation of reactive oxygen species (ROS) in a facile manner, a probable mechanism to damage the microbial membrane, the driving force behind the antimicrobial efficacy. Also, the constructs exhibited proteolytic resistance and remarkable biocompatibility toward mammalian cells. Thus, based on the above benchmarks, the homochiral hydrogelator IV was seived out from a pool of seven, and we proceeded toward its in vivo evaluation using full-thickness excisional wounds in Wister rats. The scaffolds also accentuated the re-epithelialization as well in comparison to the negative control, thereby facilitating the wound closure process in a very short span of time (10 days). Overall, our in vitro and in vivo analysis certifies hydrogelator IV as an ideal dressing material that might hold immense promise for future wound care management.

Polarity-Induced Morphological Transformation with Tunable Optical Output of Terpyridine-Phenanthro[9,10-d]imidazole-Based Ligand and Its Zn(II) Complexes with I-V Characteristics

Self-assembled nanostructures obtained from various functional π-conjugated organic molecules have been able to draw substantial interest due to their inherent optical properties, which are imperative for developing optoelectronic devices, multiple-color-emitting devices with color-tunable displays, and optical sensors. These π-conjugated molecules have proven their potential employment in various organic electronic applications. Therefore, the stimuli-responsive fabrication of these π-conjugated systems into a well-ordered assembly is extremely crucial to tuning their inherent optical properties for improved performance in organic electronic applications. To this end, herein, we have designed and synthesized a functional π-conjugated molecule (TP) having phenanthro[9,10-d]imidazole with terpyridine substitution at the 2 position and its corresponding metal complexes (TPZn and (TP)2Zn). By varying the polarity of the self-assembly medium, TP, TPZn, and (TP)2Zn are fabricated into well-ordered superstructures with morphological individualities. However, this medium polarity-induced self-assembly can tune the inherent optical properties of TP, TPZn, and (TP)2Zn and generate multiple fluorescence colors. Particularly, this property makes them useful for organic electronic applications, which require adjustable luminescence output. More importantly, in 10% aqueous-THF medium, TPZn exhibited H-type aggregation-induced white light emission and behaved as a single-component white light emitter. The experimentally obtained results of the solvent polarity-induced variation in optical properties as well as self-assembly patterns were further confirmed by theoretical investigation using density functional theory calculations. Furthermore, we investigated the I-V characteristics, both vertical and horizontal, using ITO and glass surfaces coated with TP, TPZn, and (TP)2Zn, respectively, and displayed maximum current density for the TPZn-coated surface with the order of measured current density TPZn > TP > (TP)2Zn. This observed order of current density measurements was also supported by a direct band gap calculation associated with the frontier molecular orbitals using the Tauc plot. Hence, solvent polarity-induced self-assembly behavior with adjustable luminescence output and superior I-V characteristics of TPZn make it an exceptional candidate for organic electronic applications and electronic device fabrication.

Peptide-Based Optical/Electronic Materials: Assembly and Recent Applications in Biomedicine, Sensing, and Energy Storage

The unique optical and electronic properties of living systems are impressive. Peptide-based supramolecular self-assembly systems attempt to mimic these properties by preparation optical/electronic function materials with specific structure through simple building blocks, rational molecular design, and specific kinetic stimulation. From the perspective of building blocks and assembly strategies, the unique optical and electronic properties of peptide-based nanostructures, including peptides self-assembly and peptides regulate the assembly of external function subunits, are systematically reviewed. Additionally, their applications in biomedicine, sensing, and energy storage are also highlighted. This bioinspired peptide-based function material is one of the hot candidates for the new generation of green intellect materials, with many advantages such as biocompatibility, environmental friendliness, and adjustable morphology.

A covalent organic framework-derived M1 macrophage mimic nanozyme for precise tumor-targeted imaging and NIR-II photothermal catalytic chemotherapy

Nanoprobes for efficient tumor-targeted imaging and therapy are urgently needed for clinical tumor theranostics. Herein, inspired by the heterogeneity of the tumor microenvironment, we report a covalent organic framework (COF)-derived biomimetic nanozyme for precise tumor-targeted imaging and NIR-II photothermal-catalysis-enhanced chemotherapy (PTCEC). Using a crystalline nanoscale COF as the precursor, a peroxidase-like porous N-doped carbonous nanozyme (PNC) was obtained, which was cloaked with an M1 macrophage cell membrane (M1m) to create a multifunctional biomimetic nanoprobe for tumor-targeted imaging and therapy. The M1m coating enabled the nanoprobe to target cancer cells and tumor tissues for highly efficient tumor imaging and drug delivery. The peroxidase-like activity of the PNC allowed for the conversion of intratumoral H2O2 into toxic ˙OH that synergized with its NIR-II photothermal effect to strengthen the chemotherapy. Therefore, highly efficient tumor-targeted imaging and NIR-II PTCEC were realized with an M1 macrophage mimic nanoprobe. This work provides a feasible tactic for a biomimetic theranostic nanoprobe and will inspire the development of new bioactive nanomaterials for clinical tumor theranostic applications.

Supramolecular Nanoarchitectonics Based on Antagonist Peptide Self-Assembly for Treatment of Liver Fibrosis

Therapeutic peptides have attracted increasing attention as anti-fibrotic drug candidates. However, the rapid degradation and insufficient liver accumulation of therapeutic peptides have seriously hampered their clinical translation. Here, the use of supramolecular nanoarchitectonics is reported to fabricate nanodrugs from therapeutic peptides for treating liver fibrosis. Self-assembling antagonist peptides are rationally designed and manipulated into uniform peptide nanoparticles with well-defined nanostructures and uniform sizes. Significantly, the peptide nanoparticles show enhanced accumulation in liver sites and limited distribution in other tissues. In vivo results show that the peptide nanoparticles exhibit greatly enhanced anti-fibrotic activity compared to the pristine antagonist along with good biocompatibility. These results indicate that self-assembly is a promising nanoarchitectonics approach to enhance the anti-fibrotic activity of therapeutic peptides for treating liver fibrosis.

Motorized Photomodulator: Making A Non-photoresponsive Supramolecular Gel Switchable by Light

Introducing photo-responsive molecules offers an attractive approach for remote and selective control and dynamic manipulation of material properties. However, it remains highly challenging how to use a minimal amount of photo-responsive units to optically modulate materials that are inherently inert to light irradiation. Here we show the application of a light-driven rotary molecular motor as a "motorized photo-modulator" to endow a typical H-bond-based gel system with the ability to respond to light irradiation and create a reversible sol-gel transition. The key molecular design feature is the introduction of a minimal amount (2 mol %) of molecular motors into the supramolecular network as photo-switchable non-covalent crosslinkers. Advantage is taken of the subtle interplay of the large geometry change during photo-isomerization of the molecular motor guest and the dynamic nature of a supramolecular gel host system. As a result, a tiny amount of molecular motors is enough to switch the mechanical modulus of the entire supramolecular systems. This study proves the concept of designing photo-responsive materials with minimum use of non-covalent light-absorbing units.

Construction of Pt/Pt-Au doped chiral nanostructures using arginine and porphyrin assemblies as templates for enantioselective photocatalysis

Chiral nanomaterials with different functions have been widely developed, but the deep understanding of the structural effects of nanocatalysts on enantioselective photocatalytic efficiency is still highly demanded. Herein, Pt and Pt-Au-bimetal-doped chiral nanostructures with various morphologies and compositions are facilely constructed using L-/D-arginine (L-/D-Arg) and mono-sulfonate tetraphenyl porphyrin (H2TPPS) assemblies as chiral templates. Interestingly, these Pt and Pt-Au-doped chiral nanostructures, including nanorods (NR) and nanospheres (NS), can be well regulated by controlling pH, ionic strength, and reaction time of the assembling system of Arg and H2TPPS. More impressively, specific Au growth direction along the Pt-doped chiral NR (L-/D-Pt-NR) is observed (from tip to middle) during the preparation of Pt-Au-bimetal-doped chiral NR (L-/D-Pt-Au-NR) and their compositions can be finely controlled by simply adjusting the concentrations of HAuCl4. As expected, the chiral nanostructures exhibit superior enantioselective photocatalytic ability toward chiral organics under visible light: the oxidation rate of L-dihydroxy-phenylalanine (L-DOPA) catalyzed by L-Pt-NR (or D-DOPA catalyzed by D-Pt-NR) is about 60% higher than that of L-DOPA catalyzed by D-Pt-NR (or L-DOPA catalyzed by D-Pt-NR). This study provides a facile strategy to construct chiral nanostructures for the photocatalytic conversion of chiral organics.

Emodin-Based Nanoarchitectonics with Giant Two-Photon Absorption for Enhanced Photodynamic Therapy

Two-photon-excited photodynamic therapy (TPE-PDT) has significant advantages over conventional photodynamic therapy (PDT). However, obtaining easily accessible TPE photosensitizers (PSs) with high efficiency remains a challenge. Herein, we demonstrate that emodin (Emo), a natural anthraquinone (NA) derivative, is a promising TPE PS with a large two-photon absorption cross-section (TPAC: 380.9 GM) and high singlet oxygen (1 O2 ) quantum yield (31.9 %). When co-assembled with human serum albumin (HSA), the formed Emo/HSA nanoparticles (E/H NPs) possess a giant TPAC (4.02×107  GM) and desirable 1 O2 generation capability, thus showing outstanding TPE-PDT properties against cancer cells. In vivo experiments reveal that E/H NPs exhibit improved retention time in tumors and can ablate tumors at an ultra-low dosage (0.2 mg/kg) under an 800 nm femtosecond pulsed laser irradiation. This work is beneficial for the use of natural extracts NAs for high-efficiency TPE-PDT.

Self-assembled short peptides: Recent advances and strategies for potential pharmaceutical applications

Self-assembled short peptides have intrigued scientists due to the convenience of synthesis, good biocompatibility, low toxicity, inherent biodegradability and fast response to change in the physiological environment. Therefore, it is necessary to present a comprehensive summary of the recent advances in the last decade regarding the construction, route of administration and application of self-assembled short peptides based on the knowledge on their unique and specific ability of self-assembly. Herein, we firstly explored the molecular mechanisms of self-assembly of short peptides, such as non-modified amino acids, as well as Fmoc-modified, N-functionalized, and C-functionalized peptides. Next, cell penetration, fusion, and peptide targeting in peptide-based drug delivery were characterized. Then, the common administration routes and the potential pharmaceutical applications (drug delivery, antibacterial activity, stabilizers, imaging agents, and applications in bioengineering) of peptide drugs were respectively summarized. Last but not least, some general conclusions and future perspectives in the relevant fields were briefly listed. Although with certain challenges, great opportunities are offered by self-assembled short peptides to the fascinating area of drug development.

A Serum-Stable supramolecular drug carrier for chemotherapeutics fabricated by a Peptide-Photosensitizer conjugate

Supramolecular assemblies fabricated by peptide-photosensitizer conjugates have attracted increasing attentions in recent years as drug carriers for chemotherapeutics (CTs). However, these assemblies have been known to suffer from disintegration by serum components leading to off-target drug release, and thereby impairing antitumor effects and causing systemic toxicities. To address this problem, this study reports a nano-architectural self-assembly peptide-photosensitizer carrier (NSPC) fabricated by conjugating a phthalocyanine derivative (MCPZnPc) and ε-poly-l-lysine (EPL). By engineering the core and peripheral interactions, MCPZnPC-EPL (M-E) NSPC firmly encapsulated multiple CTs, creating CT@M-E NSPCs that were highly stable against disintegration in serum. More importantly, CT@M-E NSPCs exhibited controlled release of CTs in tumor tissues. The antitumor effects of CTs were further promoted by the synergism with the reactivated photodynamic effect. Furthermore, M-E NSPC-encapsulation optimized CTs' biodistribution reducing adverse effects in vivo. This study provides a serum-stable supramolecular drug delivery system with photodynamic effect, which is applicable for a broad-range of CTs to promote antitumor effects and ameliorate adverse effects.

Rethreading Design of Ratiometric roGFP2 Mimetic Peptide for Hydrogen Peroxide Sensing

Reconstruction of the miniaturized peptide to mimic the tailored functions of protein has been attractive but challenging. Herein, initialized from the crystal structure of redox-sensitive green fluorescent protein-2 (roGFP2), we propose a practical approach to construct the roGFP2 mimetic peptide by rethreading the aromatic residues adjacent to the chromophore fragment. By fine-tuning the residues of peptides, a mini tetrapeptide (Cys-Phe-Phe-His) was designed, which can act as a hydrogen peroxide sensor using its ratiometric fluorescence. The roGFP2 mimetic tetrapeptide is biocompatible and photostable and has competitive fluorescent properties with roGFP2 by the virtue of its assembly induced emissions. We expand the ratiometric tetrapeptide for sensing hydrogen peroxide in acidic chambers. The results provide a promising approach for the artificial design of miniaturized peptides with the desired function.

A Comprehensive Analysis of the Intrinsic Visible Fluorescence Emitted by Peptide/Protein Amyloid-like Assemblies

Amyloid aggregation is a widespread process that involves proteins and peptides with different molecular complexity and amino acid composition. The structural motif (cross-β) underlying this supramolecular organization generates aggregates endowed with special mechanical and spectroscopic properties with huge implications in biomedical and technological fields, including emerging precision medicine. The puzzling ability of these assemblies to emit intrinsic and label-free fluorescence in regions of the electromagnetic spectrum, such as visible and even infrared, usually considered to be forbidden in the polypeptide chain, has attracted interest for its many implications in both basic and applied science. Despite the interest in this phenomenon, the physical basis of its origin is still poorly understood. To gain a global view of the available information on this phenomenon, we here provide an exhaustive survey of the current literature in which original data on this fluorescence have been reported. The emitting systems have been classified in terms of their molecular complexity, amino acid composition, and physical state. Information about the wavelength of the radiation used for the excitation as well as the emission range/peak has also been retrieved. The data collected here provide a picture of the complexity of this multifaceted phenomenon that could be helpful for future studies aimed at defining its structural and electronic basis and/or stimulating new applications.

A selectivity-enhanced fluorescence imprinted sensor based on yellow-emission peptide nanodots for sensitive and visual smart detection of λ-cyhalothrin

The development of precise and efficient detection technologies to recognize λ-cyhalothrin (LC) in agricultural products has attracted attention worldwide due to its widespread use and notable toxic effects on humans. Herein, a novel fluorescence biomimetic nanosensor was elaborately designed based on Zn(II)-doped cyclo-ditryptophan (c-WW)-type peptide nanodots and incorporating molecularly imprinted polymer (c-WW/Zn-PNs@MIP) for LC assays. C-WW/Zn-PNs obtained by self-assembly with aromatic cyclic dipeptides as basic building blocks and coordination with Zn(II) have low-toxicity, photostability, and bright yellow fluorescence emission, as a sensitive signal transducer. High-affinity imprinting sites further endow c-WW/Zn-PNs@MIP with superior selectivity and reusability. Based on prominent merits, c-WW/Zn-PNs@MIP demonstrated a good linear range (1-360 μg/L) with a low limit of detection (LOD) (0.93 μg/L), fast kinetics in target capture (10 min), and strong practicability in the capture of LC from real samples (spiked recovery of 81.0-107.7%). Additionally, to attain onsite profiling of LC, a visual platform was developed by integrating c-WW/Zn-PNs@MIP with a smartphone-assisted optical device. This smart evaluation system can capture concentration-dependent fluorescent images and accurately digitize them, enabling quantitative analysis of LC. This study developed a fluorescent c-WW/Zn-PNs@MIP-based smart evaluation system as a novel platform for LC monitoring applications, which not only has enormous economic value but also great environmental health significance.

Molecularly Stimuli-Responsive Self-Assembled Peptide Nanoparticles for Targeted Imaging and Therapy

Self-assembly has emerged as an extensively used method for constructing biomaterials with sizes ranging from nanometers to micrometers. Peptides have been extensively investigated for self-assembly. They are widely applied owing to their desirable biocompatibility, biodegradability, and tunable architecture. The development of peptide-based nanoparticles often requires complex synthetic processes involving chemical modification and supramolecular self-assembly. Stimuli-responsive peptide nanoparticles, also termed "smart" nanoparticles, capable of conformational and chemical changes in response to stimuli, have emerged as a class of promising materials. These smart nanoparticles find a diverse range of biomedical applications, including drug delivery, diagnostics, and biosensors. Stimuli-responsive systems include external stimuli (such as light, temperature, ultrasound, and magnetic fields) and internal stimuli (such as pH, redox environment, salt concentration, and biomarkers), facilitating the generation of a library of self-assembled biomaterials for biomedical imaging and therapy. Thus, in this review, we mainly focus on peptide-based nanoparticles built by self-assembly strategy and systematically discuss their mechanisms in response to various stimuli. Furthermore, we summarize the diverse range of biomedical applications of peptide-based nanomaterials, including diagnosis and therapy, to demonstrate their potential for medical translation.

Effect of the spacer on the structure and self-assembly of FF peptide mimetics

We have designed and synthesized a series of FF peptide mimetics with conformationally rigid and flexible spacers to study the effect of spacers on their structure and self-assembly. The results help in understanding biomolecular aggregation and provide a strategy to obtain fractal pattern materials. From X-ray single crystal analysis, the m-diaminobenzene appended FF peptide mimetic adopts a duplex structure stabilized by multiple intermolecular hydrogen bonds. There is also a water molecule bridging between two strands of the duplex. Moreover, the duplex is stabilized by three face-to-face, face-to-edge and edge-to-edge π-π interactions. The duplex formation is also supported by mass spectrometry. In higher order packing, the dimeric subunits further self-assembled to form a complex sheet-like structure stabilized by multiple intermolecular hydrogen bonding and π-π stacking interactions. Moreover, the 1,4-butadiene and m-xylylenediamine appended FF peptide mimetics form stimuli-responsive organogels in a wide range of solvents including methanol. The rheology data of FF peptide mimetic gels as a function of angular frequency and oscillatory strain also supported the formation of strong physically crosslinked gels. The FE-SEM images of the xerogels obtained from different organic solvents show that the network morphology of FF peptide mimetics varies depending on the nature of the solvents.

Fmoc-diphenylalanine gelating nanoarchitectonics: A simplistic peptide self-assembly to meet complex applications

9-fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF), has been has been extensively explored due to its ultrafast self-assembly kinetics, inherent biocompatibility, tunable physicochemical properties, and especially, the capability of forming self-sustained gels under physiological conditions. Consequently, various methodologies to develop Fmoc-FF gels and their corresponding applications in biomedical and industrial fields have been extensively studied. Herein, we systemically summarize the mechanisms underlying Fmoc-FF self-assembly, discuss the preparation methodologies of Fmoc-FF hydrogels, and then deliberate the properties as well as the diverse applications of Fmoc-FF self-assemblies. Finally, the contemporary shortcomings which limit the development of Fmoc-FF self-assembly are raised and the alternative solutions are proposed, along with future research perspectives.

Quantitative Ratiometric Biosensors Based on Fluorescent Ferrocene-Modified Histidine Dipeptide Nanoassemblies

Fluorescent proteins (FPs) provide a ratiometric readout for quantitative assessment of the destination of internalized biomolecules. FP-inspired peptide nanostructures that can compete with FPs in their capacity are the most preferred building blocks for the synthesis of fluorescent soft matter. However, realizing a ratiometric emission from a single peptide fluorophore remains exclusive since multicolor emission is a rare property in peptide nanostructures. Here, we describe a bioinspired peptidyl platform for ratiometric intracellular quantitation by employing a single ferrocene-modified histidine dipeptide. The intensiometric ratio of green to blue fluorescence correlates linearly with the concentration of the peptide by three orders of magnitude. The ratiometric fluorescence of the peptide is an assembly-induced emission originating from hydrogen bonds and aromatic interactions. Additionally, modular design enables ferrocene-modified histidine dipeptides to use as a general platform for the construction of intricate peptides that retain the ratiometric fluorescent properties. The ratiometric peptide technique promises flexibility in the design of a wide spectrum of stoichiometric biosensors for quantitatively understanding the trafficking and subcellular fate of biomolecules.

Biomimetic mineralization based on self-assembling peptides

Biomimetic science has attracted great interest in the fields of chemistry, biology, materials science, and energy. Biomimetic mineralization is the process of synthesizing inorganic minerals under the control of organic molecules or biomolecules under mild conditions. Peptides are the motifs that constitute proteins, and can self-assemble into various hierarchical structures and show a high affinity for inorganic substances. Therefore, peptides can be used as building blocks for the synthesis of functional biomimetic materials. With the participation of peptides, the morphology, size, and composition of mineralized materials can be controlled precisely. Peptides not only provide well-defined templates for the nucleation and growth of inorganic nanomaterials but also have the potential to confer inorganic nanomaterials with high catalytic efficiency, selectivity, and biotherapeutic functions. In this review, we systematically summarize research progress in the formation mechanism, nanostructural manipulation, and applications of peptide-templated mineralized materials. These can further inspire researchers to design structurally complex and functionalized biomimetic materials with great promising applications.

Amyloid-Gold Nanoparticle Hybrids for Biocompatible Memristive Devices

Biomolecular materials offer tremendous potential for the development of memristive devices due to their low cost of production, environmental friendliness, and, most notably, biocompatibility. Herein, biocompatible memristive devices based on amyloid-gold nanoparticle hybrids have been investigated. These memristors demonstrate excellent electrical performance, featuring an ultrahigh R_off/R_on ratio (>10⁷), a low switching voltage (<0.8 V), and reliable reproducibility. Additionally, the reversible transition from threshold switching to resistive switching mode was achieved in this work. The arrangement of peptides in amyloid fibrils endows the surface polarity and phenylalanine packing, which provides channels for the migration of Ag ions in the memristors. By modulating voltage pulse signals, the study successfully imitates the synaptic behavior of excitatory postsynaptic current (EPSC), paired-pulse facilitation (PPF), and the transition from short-term plasticity (STP) to long-term plasticity (LTP). More interestingly, Boolean logic standard cells were designed and simulated using the memristive devices. The fundamental and experimental results of this study thus offer insights into the utilization of biomolecular materials for advanced memristive devices.

Crown Ether-Based Ion Transporters in Bilayer Membranes

Bilayer membranes that enhance the stability of the cell are essential for cell survival, separating and protecting the interior of the cell from its external environment. Membrane-based channel proteins are crucial for sustaining cellular activities. However, dysfunction of these proteins would induce serial channelopathies, which could be substituted by artificial ion channel analogs. Crown ethers (CEs) are widely studied in the area of artificial ion channels owing to their intrinsic host-guest interaction with different kinds of organic and inorganic ions. Other advantages such as lower price, chemical stability, and easier modification also make CE a research hotspot in the field of synthetic transmembrane nanopores. And numerous CEs-based membrane-active synthetic ion channels were designed and fabricated in the past decades. Herein, the recent progress of CEs-based synthetic ion transporters has been comprehensively summarized in this review, including their design principles, functional mechanisms, controllable properties, and biomedical applications. Furthermore, this review has been concluded by discussing the future opportunities and challenges facing this research field. It is anticipated that this review could offer some inspiration for the future fabrication of novel CEs-derived ion transporters with more advanced structures, properties, and practical applications.

Self-Assembling Peptide-Based Functional Biomaterials

Peptides can self-assemble into various hierarchical nanostructures through noncovalent interactions and form functional materials exhibiting excellent chemical and physical properties, which have broad applications in bio-/nanotechnology. The self-assembly mechanism, self-assembly morphology of peptide supramolecular architecture and their various applications, have been widely explored which have the merit of biocompatibility, easy preparation, and controllable functionality. Herein, we introduce the latest research progress of self-assembling peptide-based nanomaterials and review their applications in biomedicine and optoelectronics, including tissue engineering, anticancer therapy, biomimetic catalysis, energy harvesting. We believe that this review will inspire the rational design and development of novel peptide-based functional bio-inspired materials in the future.

Stimuli-Responsive Membrane Anchor Peptide Nanofoils for Tunable Membrane Association and Lipid Bilayer Fusion

Self-assembled peptide nanostructures with stimuli-responsive features are promising as functional materials. Despite extensive research efforts, water-soluble supramolecular constructs that can interact with lipid membranes in a controllable way are still challenging to achieve. Here, we have employed a short membrane anchor protein motif (GLFD) and coupled it to a spiropyran photoswitch. Under physiological conditions, these conjugates assemble into ∼3.5 nm thick, foil-like peptide bilayer morphologies. Photoisomerization from the closed spiro (SP) form to the open merocyanine (MC) form of the photoswitch triggers rearrangements within the foils. This results in substantial changes in their membrane-binding properties, which also varies sensitively to lipid composition, ranging from reversible nanofoil reformation to stepwise membrane adsorption. The formed peptide layers in the assembly are also able to attach to various liposomes with different surface charges, enabling the fusion of their lipid bilayers. Here, SP-to-MC conversion can be used both to trigger and to modulate the liposome fusion efficiency.

Long-range ordered amino acid assemblies exhibit effective optical-to-electrical transduction and stable photoluminescence

Bio-endogenous peptide molecules are ideal components for fabrication of biocompatible and environmentally friendly semiconductors materials. However, to date, their applications have been limited due to the difficulty in obtaining stable, high-performance devices. Herein, simple amino acid derivatives fluorenylmethoxycarbonyl-leucine (Fmoc-L) and fluorenylmethoxycarbonyl-tryptophan (Fmoc-W) are utilized to form long-range ordered supramolecular nanostructures by tight aromatic stacking and extensive hydrogen bonding with mechanical, electrical and optical properties. For the first time, without addition of any photosensitizers, pure Fmoc-L microbelts and Fmoc-W microwires exhibit Young's modulus up to 28.79 and 26.96 GPa, and unprecedently high values of photocurrent responses up to 2.2 and 2.3 μA/cm², respectively. Meanwhile, Fmoc-W microwires with stable blue fluorescent emission under continuous excitation are successfully used as LED phosphors. Mechanism analysis shows that these two amino acids derivatives firstly formed dimers to reduce the bandgap, then further assemble into bioinspired semiconductor materials using the dimers as the building blocks. In this process, aromatic residues of amino acids are more conducive to the formation of semiconducting characteristics than fluorenyl groups. STATEMENT OF SIGNIFICANCE: Long-range ordered amino acid derivative assemblies with mechanical, electrical and optical properties were fabricated by a green and facile biomimetic strategy. These amino acid assemblies have Young's modulus comparable to that of concrete and exhibit typical semiconducting characteristics. Even without the addition of any photosensitizer, pure amino acid assemblies can still produce a strong photocurrent response and an unusually stable photoluminescence. The results suggest that amino acid structures with hydrophilic C-terminal and aromatic residues are more conducive to the formation of semiconducting characteristics. This work unlocks the potential for amino acid molecules to self-assemble into high-performance bioinspired semiconductors, providing a reference for customized development of biocompatible and environmentally friendly semiconductor materials through rational molecular design.

Diphenylalanine Deposition by Dip-Coating from Acidic Solutions: Fibers and Closed Homogeneous Films

A simple but precisely controllable strategy by molecular assembly that enables the construction of biomaterials is always in the development. Dip-coating deposition of diphenylalanine (FF) onto planar solid substrates from aqueous acidic (acetic, propanoic, formic, and HCl) solutions is studied as a function of the process control parameters (deposition speed, initial concentration of FF and acids, and external gas flow). The results are studied by optical microscopy, AFM, and ellipsometry. For low acidity and low FF concentrations, FF forms microfibers, nanofibers, or stripes of fiber aggregates. For higher acidity and FF concentrations, closed films of FF of remarkably smooth surfaces are found. The thickness of these films can be well-controlled by the FF concentration and the deposition speed and explained by the evaporation regime. These unusual results provide new possibilities to fabricate more abundant structures by a simple strategy and develop a candidate for biological membrane areas.

Versatile Synthesis of Multivalent Porphyrin–Peptide Conjugates by Direct Porphyrin Construction on Resin

Multifunctional porphyrin–peptide conjugates with different propensities for self‐assembly into various supramolecular nanoarchitectures play important roles in advanced materials and biomedical research. However, preparing prefunctionalized core porphyrins by traditional low‐yielding statistical synthesis and purifying them after peptide ligation through many rounds of HPLC purification is tedious and unsustainable. Herein, we report a novel integrated solid‐phase synthetic protocol for the construction of porphyrin moieties from simple aldehydes and dipyrromethanes on resin‐bound peptides directly to form mono‐, cis/trans‐di‐, and trivalent porphyrin–peptide conjugates in a highly efficient and controllable manner; moreover, only single final‐stage HPLC purification of the products is needed. This efficient strategy enables the rapid, greener, and substrate‐controlled diversity‐oriented synthesis of multivalent porphyrin–(long) peptide conjugate libraries for multifarious biological and materials applications.

Responsive Peptide Nanofibers with Theranostic and Prognostic Capacity

Photodynamic therapy (PDT) is a highly promising therapeutic modality for cancer treatment. The development of stimuli-responsive photosensitizer nanomaterials overcomes certain limitations in clinical PDT. Herein, we report the rational design of a highly sensitive PEGylated photosensitizer-peptide nanofiber (termed PHHPEG 6 NF) that selectively aggregates in the acidic tumor and lysosomal microenvironment. These nanofibers exhibit acid-induced enhanced singlet oxygen generation, cellular uptake, and PDT efficacy in vitro , as well as fast tumor accumulation, long-term tumor imaging capacity and effective PDT in vivo . Moreover, based on the prolonged presence of the fluorescent signal at the tumor site, we demonstrate that PHHPEG 6 NFs can also be applied for prognostic monitoring of the efficacy of PDT in vivo , which would potentially guide cancer treatment. Therefore, these multifunctional PHHPEG 6 NFs allow control over the entire PDT process, from visualization of photosensitizer accumulation, via actual PDT to the assessment of the efficacy of the treatment.

Microfabrication of peptide self-assemblies: inspired by nature towards applications

Peptide self-assemblies show intriguing and tunable physicochemical properties, and thus have been attracting increasing interest over the last two decades. However, the micro/nano-scale dimensions of the self-assemblies severely restrict their extensive applications. Inspired by nature, to genuinely realize the practical utilization of the bio-organic super-architectures, it is beneficial to further organize the peptide self-assemblies to integrate the properties of the individual supermolecules and fabricate higher-level organizations for smart functional devices. Therefore, cumulative studies have been reported on peptide microfabrication giving rise to diverse properties. This review summarizes the recent development of the microfabrication of peptide self-assemblies, discussing each methodology along with the diverse properties and practical applications of the engineered peptide large-scale, highly-ordered organizations. Finally, the current limitations of the state-of-the-art microfabrication strategies are critically assessed and alternative solutions are suggested.

Aromatic Dipeptide Homologue-Based Hydrogels for Photocontrolled Drug Release

Peptide-based hydrogels are considered of special importance due to their biocompatibility and biodegradability. They have a wide range of applications in the biomedical field, such as drug delivery, tissue engineering, wound healing, cell culture media, and biosensing. Nevertheless, peptide-based hydrogels composed of natural α-amino acids are limited for in vivo applications because of the possible degradation by proteolytic enzymes. To circumvent this issue, the incorporation of extra methylene groups within the peptide sequence and the protection of the terminal amino group can increase the enzymatic stability. In this context, we investigated the self-assembly capacity of aromatic dipeptides (Boc-α-diphenylalanine and Boc-α-dityrosine) and their β- and γ-homologues and developed stable hydrogels. Surprisingly, only the Boc-diphenylalanine analogues were able to self-assemble and form hydrogels. A model drug, l-ascorbic acid, and oxidized carbon nanotubes (CNTs) or graphene oxide were then incorporated into the hydrogels. Under near-infrared light irradiation, the photothermal effect of the carbon nanomaterials induced the destabilization of the gel structure, which caused the release of a high amount of drug, thus providing opportunities for photocontrolled on-demand drug release.

Quantum confined peptide assemblies in a visual photoluminescent hydrogel platform and smartphone-assisted sample-to-answer analyzer for detecting trace pyrethroids

Quantum confinement (QC) effect-related materials have been extensively studied as photoluminescent probes for agricultural, food, and environmental analyses, with the advantage of simple-to-synthesize, reusable, nontoxic, and environmentally friendly. Herein, we propose a strategy to dimerize aromatic cyclo-dipeptides, namely cyclo-ditryptophan (cyclo-WW), cyclo-diphenylalanine (cyclo-FF), and cyclo-dihistidine (cyclo-HH), into quantum dots as basic building blocks for the self-assembly of QC supramolecular structures with excellent photoluminescent properties in aqueous solutions. In particular, through coordination with Zn(II), the bandgap can be tuned to change the photo-absorption and luminescence properties of the cyclo-dipeptide-based QC assemblies. The fluorescence quantum yield of cyclo-WW+Zn(II) was 16.9%. Such a good luminous effect makes it applicable to the detection of LC. A good linear relationship between fluorescence response of cyclo-WW+Zn(II) and LC concentration was observed in the range of 5-350 μg/L, with a low limit of detection of 2.9 μg/L and good spiked recovery of 90.72%-104.3%. A visual platform using the cyclo-WW+Zn(II)-based photoluminescent hydrogel and smartphone-assisted sample-to-answer analyzer were developed, which showed good responsiveness to LC. The developed fluorescence method, validated using traditional HPLC, is a biocompatible alternative for the rapid detection of trace pollutants with the advantages of portability and simple operation.

Amino-Acid-Encoded Supramolecular Photothermal Nanomedicine for Enhanced Cancer Therapy

Photothermal nanomedicine based on self-assembly of biological components, with excellent biosafety and customized performance, is vital significance for precision cancer therapy. However, the programmable design of photothermal nanomedicine remains extremely challenging due to the vulnerability and variability of noncovalent interactions governing supramolecular self-assembly. Herein, it is reported that amino acid encoding is a facile and potent means to design and construct supramolecular photothermal nanodrugs with controlled therapeutic activities. It is found that the amount and type of amino acid dominates the assembled nanostructures, structural stability, energy-conversion pathway, and therapeutic mechanism of the resulting nanodrugs. Two optimized nanodrugs are endowed with robust structural integrity against disassembly along with high photothermal conversion efficiency, efficient cellular internalization, and enhanced tumor accumulation, which result in more efficient tumor ablation. This work demonstrates that design based on amino acid encoding offers an unprecedented opportunity for the construction of remarkable photoactive nanomedicines toward cancer diagnostics and therapeutics.

Systems chemistry of peptide-assemblies for biochemical transformations

During the billions of years of the evolutionary journey, primitive polymers, involved in proto metabolic pathways with low catalytic activity, played critical roles in the emergence of modern enzymes with remarkable substrate specificity. The precise positioning of amino acid residues and the complex orchestrated interplay in the binding pockets of evolved enzymes promote covalent and non-covalent interactions to foster a diverse set of complex catalytic transformations. Recent efforts to emulate the structural and functional information of extant enzymes by minimal peptide based assemblies have attempted to provide a holistic approach that could help in discerning the prebiotic origins of catalytically active binding pockets of advanced proteins. In addition to the impressive sets of advanced biochemical transformations, catalytic promiscuity and cascade catalysis by such small molecule based dynamic systems can foreshadow the ancestral catalytic processes required for the onset of protometabolism. Looking beyond minimal systems that work close to equilibrium, catalytic systems and compartments under non-equilibrium conditions utilizing simple prebiotically relevant precursors have attempted to shed light on how bioenergetics played an essential role in chemical emergence of complex behaviour. Herein, we map out these recent works and progress where diverse sets of complex enzymatic transformations were demonstrated by utilizing minimal peptide based self-assembled systems. Further, we have attempted to cover the examples of peptide assemblies that could feature promiscuous activity and promote complex multistep cascade reaction networks. The review also covers a few recent examples of minimal transient catalytic assemblies under non-equilibrium conditions. This review attempts to provide a broad perspective for potentially programming functionality via rational selection of amino acid sequences leading towards minimal catalytic systems that resemble the traits of contemporary enzymes.