Confinement of Cu nanoparticles in the nanocages of large pore SBA-16 functionalized with carboxylic acid: enhanced activity and improved durability for 4-nitrophenol reduction

Synthesis and characterization of chitosan-copper nanocomposites and their catalytic properties for 4-nitrophenol reduction

Biopolymer-based copper nanoparticles (CuNPs) have become an area of significant interest due to their wide-ranging applications in a variety of fields. However, there remains a challenge in tailoring their morphologies and improving their properties. In this study, CuNPs were synthesized via wet chemical reduction using sodium hypophosphite monohydrate (NaH2PO2·H2O), l-ascorbic acid and chitosan. The effect of different synthesis conditions, including reaction pH, temperature, time, concentration of NaH2PO2·H2O, l-ascorbic acid and chitosan, as well as the deacetylation degree (DD) of chitosan, on the synthesis of CuNPs was investigated. The synthesized CuNPs were characterized by various analytical techniques. The catalytic properties of synthesized CuNPs were investigated for the reduction of 4-nitrophenol (4-NP) in the presence of sodium borohydride. The synthesis-morphology-catalytic activity relationship of CuNPs was discussed. The results suggested that the morphology of CuNPs could be adjusted by controlling the synthesis conditions. Chitosan DD significantly impacts the morphology of the synthesized CuNPs. As the chitosan DD decreased from 91.8 % to 52.3 %, the average particle size of synthesized CuNPs decreased from 43.9 ± 10.6 to 17.7 ± 5.9 nm and the shape changed from anisotropy to near-sphere. CuNPs synthesized using low DD (53.2 %) chitosan (CuNPs-N3) demonstrated the highest 4-NP conversion rate of 99.1 % and reaction rate constant of 0.3540 min-1. CuNPs-N3 was thermodynamically and kinetically more feasible than CuNPs synthesized with high DD chitosan. These findings provide important insights for further designing and developing hierarchical nanostructured CuNPs catalysts for broader applications.

α-Hydroxy acids modified β-cyclodextrin capped iron nanocatalyst for rapid reduction of nitroaromatics: A sonochemical approach

This study reports a sonochemical approach for the synthesis and catalytic performance of zerovalent iron nanoparticles (nZVI) capped with two cyclodextrin (CD) crosslinked polymers derived from Lactic acid and Citric acid (CDLA and CDCA respectively). The polymers and the catalysts were characterized by NMR, FTIR, HRTEM, DLS, Zeta potential, FESEM, EDAX, VSM, XRD, XPS, TGA analysis. The catalysts proved to be sustainable and recyclable for rapid sonochemical reduction of nitroaromatics under ambient conditions. The isolated yield of the derivatives was found to be greater than 90%. The results suggest excellent dispersibility, stability, high iron content and smaller size of CDLA polymer capped nZVI compared to CDCA capped nZVI, leading to two-fold higher catalytic activity. The effect of various crucial catalysis parameters was investigated and optimized. The scope of the reaction was extended to other nitroaromatics under the optimized conditions. Being magnetically separable, the cost effective and non-toxic catalysts exhibited high recycling efficiency (~13 cycles), high turnover number (TON) and turnover frequency (TOF). The recyclable catalysts could be low-cost and sustainable options for organic transformation in water via sonochemical approach in aqueous medium.

Preparation of Activated Carbon Derived from Jordanian Olive Cake and Functionalized with Cu/Cu2O/CuO for Adsorption of Phenolic Compounds from Olive Mill Wastewater

Olive oil production generates solid and liquid wastes that cause various environmental problems due to their high phenols and polyphenols load. Although many treatment methods were investigated to manage these wastes, more research is still needed to identify simple and cost-effective approaches. In this study, activated carbon (AC) was prepared from olive cake waste and functionalized with Cu/Cu₂O/CuO for efficient and selective removal of phenolic content from olive mill wastewater (OMW). AC media were characterized by scanning electron/dispersive X-ray spectroscopy (SEM-EDS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrometry, and Brunauer-Emmett-Teller (BET) surface area analysis. The optimum adsorption parameters were investigated, and the adsorption isotherms, thermodynamics, and kinetics were determined. The adsorption of phenols onto copper oxide AC was best described by the Langmuir adsorption with maximum adsorption capacity of 13.9, 12.7, and 9.9 mg/g at 311, 302, and 293 K, respectively. The adsorption reaction was found to be spontaneous and endothermic where ∆H° and ∆G° were found to be 30.104 kJ/mol and -1.765, -2.839, and -3.723 (kJ/mol) at 311, 302, and 293 K, respectively. In addition, the kinetics data were perfectly fit by the pseudo-second-order model. The activated product derived from recyclable olive cake and enriched with inorganic functionality can offer a cost-effective treatment solution for OMW; thus, reducing both the liquid and solid waste generated from the olive mill industry.

Bimetallic Co/Zn zeolitic imidazolate framework ZIF-67 supported Cu nanoparticles: An excellent catalyst for reduction of synthetic dyes and nitroarenes

In this study, a sub-class of microporous crystalline metal organic frameworks (MOFs) with zeolite-like configurations, i.e., zeolitic imidazolate frameworks of single node ZIF-67 and binary nodes ZIF-Co/Zn are used as the supports to develop Cu nanoparticles based nanocatalysts. Their catalytic activities are comparatively evaluated where Cu(x)@ZIF-Co/Zn exhibits better performances than Cu(x)@ZIF-67 in the reduction of synthetic dyes and nitroarenes. For instance, the Cu(0.25)@ZIF-Co/Zn catalyst shows an excellent reaction rate of 2.088 × 10^-2 s^-1 and an outstanding activity of 104.4 s^-1g_cat^-1 for the reduction of methyl orange. The same catalyst also performs an exceptional catalytic activity in the hydrogenation of p-nitrophenol to p-aminophenol with the activity of 216.5 s^-1g_cat^-1. A synergistic role of unique electronic properties rising from the direct contact of Cu NPs with the bimetallic nodes ZIF-Co/Zn, higher surface area of support, appropriate Cu loading and maintainable microporous frameworks with higher thermal and hydrolytic stability collectively enhances the catalytic activity of Cu(x)@ZIF-Co/Zn. Moreover, this catalyst shows excellent stability and recyclability, which can retain high conversion after reuse for 10 cycles.

Intriguing hierarchical Co@NC microflowers in situ assembled by nanoneedles: Towards enhanced reduction of nitroaromatic compounds via interfacial synergistic catalysis

Developing highly efficient and cost-effective catalyst with tuned microstructure holds great promise in the reduction of nitroaromatic compounds under mild reaction conditions. Herein, we report a new Co@NC-MF catalyst with a fascinating hierarchical flower-like architecture in situ assembled from uniform Co@NC nanoneedles, which can function as a favorable platform for the efficient reduction of nitroaromatic compounds in the presence of NaBH₄. In addition with the structural advantage, the characterization and experimental results demonstrate the enormous advantage of interfacial synergistic catalysis in enhancing the catalytic performance. The outside electron-rich N-doped carbon layer as Lewis basic sites and the inside Co nanoparticles are responsible for the adsorption of 4-nitrophenol (4-NP) and generation of active hydrogen species, respectively. This work contributes to the construction of well-integrated composites with well-balanced interface synergy to boost the catalytic performance in various heterogeneous reactions.