A room-temperature interfacial approach towards iron/nitrogen co-doped fibrous porous carbons as electrocatalysts for the oxygen reduction reaction and Zn-Air batteries

Tuning Iron Active Sites of FeOOH via Al3+ and Heteroatom Doping-Induced Asymmetric Oxygen Vacancy Electronic Structure for Efficient Alkaline Water Splitting

Oxygen evolution reaction is the essential anodic reaction for water splitting. Designing tunable electronic structures to overcome its slow kinetics is an effective strategy. Herein, the molecular ammonium iron sulfate dodecahydrate is employed as the precursor to synthesize the C, N, S triatomic co-doped Fe(Al)OOH on Ni foam (C,N,S-Fe(Al)OOH-NF) with asymmetric electronic structure. Both in situ oxygen vacancies and their special electronic configuration enable the electron transfer between the d-p orbitals and get the increase of OER activity. Density functional theory calculation further indicates the effect of electronic structure on catalytic activity and stability at the oxygen vacancies. In alkaline solution, the catalyst C,N,S-Fe(Al)OOH-NF shows good catalytic activity and stability for water splitting. For OER, the overpotential of 10 mA cm-2 is 264 mV, the tafel slope is 46.4 mV dec-1, the HER overpotential of 10 mA cm-2 is 188 mV, the tafel slope is 59.3 mV dec-1. The stability of the catalyst can maintain ≈100 h. This work has extraordinary implications for understanding the mechanistic relationship between electronic structure and catalytic activity for designing friendly metal (oxy)hydroxide catalysts.

Bimetallic iron complex constructed clusters and single atoms neighboring structure to enhance oxygen reduction reaction performance

Electrocatalysts are useful in lowering the energy barrier in oxygen reduction reaction (ORR). In this study, a catalyst with neighboring Fe single-atom and cluster is created by adsorbing a bimetallic Fe complex onto N-doped carbon and then pyrolyzing it. The resulting catalyst has good performance and a half-wave potential of 0.89 V. When used in Zn-air batteries, the voltage drops by only 8.13 % after 145 h of cycling. Theoretical studies show that electrons transfer from neighboring clusters to single atoms and the catalyst has a lower d-band center. These reduce intermediate desorption energy, hence improving ORR performance. This work demonstrates the capacity to adjust the catalytic properties through the interaction of diverse metal structures, which helps to design more efficient catalysts.

Fundamental understanding of nitrogen in biomass electrocatalysts for oxygen reduction and zinc-air batteries

Exploring high-efficiency catalysts for oxygen reduction reactions (ORRs) is essential for the development of large-scale applications of fuel cell and metal-air batteries technology. The as-prepared Fe-NC-800 via polymerization-pyrolysis strategy exhibited superior ORR activity with onset potential of 1.030 V vs. reversible hydrogen electrode (RHE) and half-wave potential of 0.908 V vs. RHE, which is higher than that of the Pt/C catalyst and most of other Fe-based catalysts. The different d-band center values can be attributed to the influence of different N-doped carbon, leading to the adjustment in the ORR activity. In addition, Fe-NC-800-based Zn-air battery showed better electrochemical performance with a high discharge specific capacity of 806 mA h g-1 and a high-power density of 220 mW cm-2 than that of the Pt/C-based battery. Therefore, the biomass Fe-NC-800 catalyst may become a promising substitute for Pt/C catalysts in energy storage and conversion devices.

Highly Accessible Co-Nx Active Sites-Doped Carbon Framework with Uniformly Dispersed Cobalt Nanoparticles for the Oxygen Reduction Reaction in Alkaline and Neutral Electrolytes

Porous carbon materials with nitrogen-coordinated transition metal active sites have been widely regarded as appealing alternatives to replace noble metal catalysts in oxygen-based electrochemical reaction activities. However, improving the electrocatalytic activity of transition-metal-based catalysts remains a challenge for widespread application in renewable devices. Herein, we use a simple one-step pyrolysis method to construct a Co nanoparticles/Co-Nx-decorated carbon framework catalyst with a near-total external surface structure and uniform dispersion nanoparticles, which displays promising catalytic activity and superior stability for oxygen reduction reactions in both alkaline and neutral electrolytes, as evidenced by the positive shift of half-wave potential by 44 and 11 mV compared to 20% Pt/C. Excellent electrochemical performance originates from highly accessible Co nanoparticles/Co-Nx active sites at the external surface structure (this is, exposing active sites). The thus-assembled liquid zinc-air battery using the synthesized electrocatalyst as the cathode material delivers a maximum power density of 178 mW cm-2 with an open circuit potential of 1.48 V and long-term discharge stability over 150 h.

Single atom iron implanted polydopamine-modified hollow leaf-like N-doped carbon catalyst for improving oxygen reduction reaction and zinc-air batteries

Metal-nitrogen-carbon (MNC) catalysts, especially FeNC catalysts, are considered promising candidates to replace Pt-based catalysts, but FeNC catalysts still present certain challenges in controlled-synthesis and energy device applications. In this paper, through the modification strategy of poly-dopamine (PDA) to maintain 2D leaf morphology to obtain more active sites and further adjust the N content, N-doped porous carbon monatomic iron catalyst (Fe_SA/NPCs) with rich-nitrogen content was prepared. XPS analysis showed that compared with C-ZIF-Fe, the contents of graphite nitrogen and pyridine nitrogen increased in Fe_SA/NPCs. The hollow structure with defects and Fe-N₄ configuration of Fe single atom show more active sites for the catalyst, and positively promote the diffusion of reactants, oxygen exchange and electron transport, thus changing the reaction kinetics and promoting the improvement of ORR activity. Fe_SA/NPCs electrocatalyst exhibits good half-wave potential and onset potential at low loading (E_1/2 = 0.93 V, E_onset = 1.0 V). In addition, the methanol tolerance, stability and Tafel slope are better than those of commercial Pt/C. Excitingly, the zinc-air cell with Fe_SA/NPCs as cathode material achieves a power density of 223 mW cm^-2 and exhibits a long-term stability higher than 200 h. This work shows that nitrogen-doped porous carbon materials as well as iron monoatoms play important roles in improving electrocatalytic performance.

Regulating the thickness of the carbon coating layer in iron/carbon heterostructures to enhance the catalytic performance for oxygen evolution reaction

The exploration of high-performance electrocatalysts for the oxygen evolution reaction (OER) is crucial and urgent for the fast development of green and renewable hydrogen energy. Herein, an ultra-fast and energy-efficient preparation strategy (microwave-assisted rapid in-situ pyrolysis of organometallic compounds induced by carbon nanotube (CNT)) is developed to obtain iron/carbon (Fe/C) heterogeneous materials (Fe/Fe₃C particles wrapped by carbon coating layer). The thickness of the carbon coating layer can be adjusted by changing the content and form of carbon in the metal sources during the fast preparation process. Fe/Fe₃C-A@CNT using iron acetylacetonate as metal sources possesses unique Fe/C heterogeneous, small Fe/Fe₃C particles encapsulated by the thin carbon coating layer (1.77 nm), and obtains the optimal electron penetration effect. The electron penetration effect derives from the redistribution of charge between the surface carbon coating layer and inner Fe/Fe₃C nanoparticles efficiently improving both catalytic activity and stability. Therefore, Fe/Fe₃C-A@CNT shows efficient OER catalytic activity, just needing a low overpotential of 292 mV to reach a current density of 10 mA cm^-2, and long-lasting stability. More importantly, the unique control strategy for carbon thickness in this work provides more opportunity and perspective to prepare robust metal/carbon-based catalytic materials at the nanoscale.

Porous Carbon Membrane-Supported Atomically Dispersed Pyrrole-Type FeN4 as Active Sites for Electrochemical Hydrazine Oxidation Reaction

The rational design of catalytically active sites in porous materials is essential in electrocatalysis. Herein, atomically dispersed Fe-N_x sites supported by hierarchically porous carbon membranes are designed to electrocatalyze the hydrazine oxidation reaction (HzOR), one of the key techniques in electrochemical nitrogen transformation. The high intrinsic catalytic activity of the Fe-N_x single-atom catalyst together with the uniquely mixed micro-/macroporous membrane support positions such an electrode among the best-known heteroatom-based carbon anodes for hydrazine fuel cells. Combined with advanced characterization techniques, electrochemical probe experiments, and density functional theory calculation, the pyrrole-type FeN₄ structure is identified as the real catalytic site in HzOR.

Pollen-derived porous carbon decorated with cobalt/iron sulfide hybrids as cathode catalysts for flexible all-solid-state rechargeable Zn-air batteries

The development of flexible all-solid-state rechargeable Zn-air batteries (FS-ZABs) for wearable applications faces challenges from the balance between performance and flexibility of the battery; efficient cathode catalyst and reasonable electrode construction design are key factors. Herein, a low-cost pollen derived N,S co-doped porous carbon decorated with Co9S8/Fe3S4 nanoparticle hybrids (Co-Fe-S@NSRPC) has been synthesized. Owing to the active Co9S8/Fe3S4 nanoparticles, N,S co-doping, and large specific area of the pollen derived porous carbon matrix, the Co-Fe-S@NSRPC composite exhibits an excellent bifunctional catalytic activity with a small potential gap (ΔE = 0.80 V) between the half-wave potential for the ORR (0.80 V) and the potential at 10 mA cm-2 for the OER (1.60 V), and endows a liquid Zn-air battery with a high power density of 138 mW cm-2, a larger specific capacity of 891 mA h g-1 and a stable rechargeability of up to 331 cycles. Based on the Co-Fe-S@NSRPC cathode catalyst, a 2D coplanar FS-ZAB has been fabricated with specially designed parallel narrow strip electrodes alternately arrayed on a polyacrylamide polyacrylic acid copolymer hydrogel solid electrolyte. The presented FS-ZAB exhibits excellent battery performance with high open-circuit-voltage (1.415 V), competitive peak power density (78 mW cm-2), large specific capacity (785 mA h g-1) and stable rechargeability (150 cycles), offers robust flexibility to maintain stable charge/discharge capacity under different bending deformations, and provides convenient coplanar integrability to realize parallel or series connection of multiple cells in a relatively small area.

Ionic Polyimide Derived Porous Carbon Nanosheets as High-Efficiency Oxygen Reduction Catalysts for Zn-Air Batteries

Two-dimensional (2D) porous carbon nanosheets (2DPCs) have attracted great attention for their good porosity and long-distance conductivity. Factors such as templates, precursors, and carbonization-activation methods, directly determine their performance. However, rational design and preparation of porous carbon materials with controlled 2D morphology and heteroatom dopants remains a challenge. Therefore, an ionic polyimide with both sp² - and sp³ -hybridized nitrogen atoms was prepared as a precursor for fabricating N-doped hexagonal porous carbon nanosheets through a hard-template approach. Because of the large surface area and efficient charge-mass transport, the resulting activated 2D porous carbon nanosheets (2DPCs-a) displayed promising electrocatalytic properties for oxygen reduction reaction (ORR) in alkaline and acidic media, such as ultralow half-wave potential (0.83 vs. 0.84 V of Pt/C) and superior limiting current density (5.42 vs. 5.14 mA cm^-2 of Pt/C). As air cathodes in Zn-air batteries, the as-developed 2DPCs-a exhibited long stability and high capacity (up to 614 mA h g^-1 ), which are both higher than those of commercial Pt/C. This work provides a convenient method for controllable and scalable 2DPCs fabrication as well as new opportunities to develop high-efficiency electrocatalysts for ORR and Zn-air batteries.

Porous carbons embedded with nitrogen-coordinated cobalt as an exceptional electrochemical catalyst for high-performance Zn–air batteries

Establish a polymer framework coordination transition metal strategy to fabricate Co/N-PCs for energy conversion and storage.

Synthesis of Fe3C@porous carbon nanorods via carbonizing Fe complexes for oxygen reduction reaction and Zn–air battery

The FeCNRs were controlled prepared via carbonizing the Fe complexes and their activities on ORR was found to be suitable for Zn–air battery application.

Multifunctional 2H-TaS2 nanoflakes for efficient supercapacitors and electrocatalytic evolution of hydrogen and oxygen

Layered transition-metal dichalcogenides based on VIB elements have attracted substantial attention for their applications in energy storage and conversion. However, few studies have concentrated on VB element dichalcogenides. Herein, we report that trifunctional 2H-TaS2 nanoflakes exhibit high performance when applied in supercapacitors, hydrogen evolution reactions (HER) and oxygen evolution reactions (OER). Notably, TaS2 nanoflakes delivered a large volumetric capacitance (502 F cm-3 at the scan rate of 10 mV s-1) and remarkable cycling stability (over 91% after 5000 cycles). TaS2 nanoflakes also exhibited remarkable catalytic performances in HER and OER processes, showing very small overpotentials and Tafel slopes, which are far better than those of the previously reported TaS2 electrocatalysts. Furthermore, TaS2 is highly stable in both alkaline and acidic electrolyte solutions. This work offers a new concept to design VB element-based electrodes for future energy storage and conversion applications.

Graphite N-C-P dominated three-dimensional nitrogen and phosphorus co-doped holey graphene foams as high-efficiency electrocatalysts for Zn-air batteries

The search for metal-free catalysts for oxygen reduction reactions (ORRs) in energy storage and conversion devices, such as fuel cells and metal-air batteries, is highly desirable but challenging. Here, we have designed and synthesized controllable 3D nitrogen and phosphorous co-doped holey graphene foams (N,P-HGFs) as a high-efficiency ORR catalyst through structural regulation and electronic engineering. The obtained catalyst shows a half-wave potential of 0.865 V in alkaline electrolytes. It is found that Zn-air batteries with the N,P-HGFs-1000 air electrode exhibit excellent discharge performance and durability. Our study suggests that the remarkable ORR performance of N,P co-doped graphene is mainly due to the graphite N-C-P structure, where an enhanced charge density and increased HOMO energy level are confirmed by both experimental results and theoretical density-functional theory calculations.

Robust hollow nanocomposites with ruthenium-bipyridine complexes for heterogeneous catalysis of logic-controlled RAFT polymerization

Photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization has become a powerful and eco-friendly toolkit to create well-defined macromolecular buildups while exhibiting composition, sequence and spatiotemporal control. Although PET-RAFT polymerization is generally much more convenient than living ionic polymerization, it is still a great challenge to regulate the polymerization upon multiple external stimuli and to simplify the procedures of post-polymerization purification. In this contribution, hHPGE-PFPPNRu nanocomposites were engineered as catalyst supports to firmly accommodate ruthenium-bipyridine complexes for heterogeneous catalysis of PET-RAFT polymerization. The manipulation of reaction temperature modulated the performance of the nanocatalysts, with a pronounced acceleration of the polymerization kinetics being identified at a temperature above the lower critical solution temperature (LCST) of poly(N-isopropylacrylamide) (PNIPAM) brushes compared to that below it. Consequently, the control of RAFT polymerization can be achieved upon the dual-stimuli of light and heat. Moreover, these nanocatalysts conferred radical polymerizations with myriad attractive features such as the adaptability of diverse monomer formulations and reaction media, exquisite control over the molecular variables, oxygen tolerance, and catalyst doses in the ppm range. Owing to the robust mechanical nature of nanocomposites, the separation and reuse of the nanocatalysts were readily realized by rapid centrifugation, and they showed inappreciable catalyst leakage along with consistent catalytic performance even after multiple polymerization runs.

Anchoring ultrafine PtNi nanoparticles on N-doped graphene for highly efficient hydrogen evolution reaction

One-step rapid synthesis of ultrafine PtNi nanoparticles anchored on –NH₂ and N doped graphene for highly efficient hydrogen evolution reaction.