CsPbBr3-Cs4PbBr6 composite nanocrystals for highly efficient pure green light emission

Light-Emitting Diodes Based on Metal Halide Perovskite and Perovskite Related Nanocrystals

Light-emitting diodes (LEDs) based on halide perovskite nanocrystals have attracted extensive attention due to their considerable luminescence efficiency, wide color gamut, high color purity, and facile material synthesis. Since the first demonstration of LEDs based on MAPbBr3 nanocrystals was reported in 2014, the community has witnessed a rapid development in their performances. In this review, a historical perspective of the development of LEDs based on halide perovskite nanocrystals is provided and then a comprehensive survey of current strategies for high-efficiency lead-based perovskite nanocrystals LEDs, including synthesis optimization, ion doping/alloying, and shell coating is presented. Then the basic characteristics and emission mechanisms of lead-free perovskite and perovskite-related nanocrystals emitters in environmentally friendly LEDs, from the standpoint of different emission colors are reviewed. Finally, the progress in LED applications is covered and an outlook of the opportunities and challenges for future developments in this field is provided.

Post-hot-cast annealing deposition of perovskite films with infused multifunctional organic molecules to enhance the performance of large-area light-emitting devices

All-inorganic perovskites show great promise as an emission layer in perovskite light-emitting diodes (PeLEDs) owing to their easy solution processing, low manufacturing cost, and excellent optoelectronic properties. However, there is still an immense performance gap from small-area devices to large-area PeLED devices. The inhomogeneity of large-area high-quality perovskite films inevitably leads to vast defects and electroluminescence performance losses. Herein, a post-hot-cast annealing deposition scheme and the introduction of the multifunctional molecule 2-amino-1,3-propanediol (APDO) were proposed to regulate the crystallization of the perovskite film. As a result, uniform APDO:CsPbBr2.5Cl0.5 perovskite films with high crystallinity and lower defect density were deposited by post-hot-cast annealing. A decent maximum brightness of 2659 cd m-2 was achieved for the large-area cyan PeLEDs with an emitting area of 400 mm2.

Interface-Enhanced Charge Recombination in the Heterojunction between Perovskite Nanocrystals and BiOI Nanosheets Serves as an S-Scheme Photocatalyst for CO2 Reduction

We designed an S-heterojunction system with a perovskite nanocrystal, Cs_1-xFA_xPbBr₃ (CF), coupled with a bismuth oxyiodide (BiOI) nanosheet to form a perovskite heterojunction (PHJ) photocatalyst. On the basis of femtosecond transient absorption measurements, the pristine CF sample has two charge recombination periods, 100 and 900 ps, corresponding to surface and bulk trap-state relaxations, respectively. When CF was in contact with BiOI to form an S-heterojunction, rapid interfacial charge recombination occurred to show two decay components with time coefficients 1 and 35 ps, responsible for the electron-hole recombination in the surface and bulk states, respectively. We observed a new photoinduced absorption band on the blue side of the photobleach band of PHJ that gives relaxation more rapid than that of pristine CF, presumably due to doping of bismuth cations creating defect states to enhance the charge recombination that leads to photocatalytic performance for the PHJ catalyst poorer than for the pristine CF sample.

Stable and Bright Electroluminescent Devices utilizing Emissive 0D Perovskite Nanocrystals Incorporated in a 3D CsPbBr3 Matrix

The 0D cesium lead halide perovskite Cs₄ PbBr₆ has drawn remarkable interest due to its highly efficient robust green emission compared to its 3D CsPbBr₃ counterpart. However, seizing the advantages of the superior photoluminescence properties for practical light-emitting devices remains elusive. To date, Cs₄ PbBr₆ has been employed only as a higher-bandgap nonluminescent matrix to passivate or provide quantum/dielectric confinement to CsPbBr₃ in light-emitting devices and to enhance its photo-/thermal/environmental stability. To resolve this disparity, a novel solvent engineering method to incorporate highly luminescent 0D Cs₄ PbBr₆ nanocrystals (perovskite nanocrystals (PNCs)) into a 3D CsPbBr₃ film, forming the active emissive layer in single-layer perovskite light-emitting electrochemical cells (PeLECs) is designed. A dramatic increase of the maximum external quantum efficiency and luminance from 2.7% and 6050 cd m^-2 for a 3D-only PeLEC to 8.3% and 11 200 cd m^-2 for a 3D-0D PNC device with only 7% by weight of 0D PNCs is observed. The majority of this increase is driven by the efficient inherent emission of the 0D PNCs, while the concomitant morphology improvement also contributes to reduced leakage current, reduced hysteresis, and enhanced operational lifetime (half-life of 129 h), making this one of the best-performing LECs reported to date.

Formation mechanisms of CsPbBr3/Cs4PbBr6 microscale composites assisted with imidazolium cations and their device applications

The instability of all-inorganic perovskite nanocrystals (NCs) remains a major challenge to their practical applications in displays and lighting. In order to improve their environmental resistance, highly luminescent CsPbBr₃ NC embedded Cs₄PbBr₆ microcrystals (MCs) have been fabricated by an anti-solvent reprecipitation method with the assistance of 1-alkyl-3-methyl-imidazolium bromides. The heterostructure of the MCs is investigated in detail, and their formation mechanism is discussed in terms of the dissolution-precipitation equilibria and the total energy of variously scaled nanoparticles via density functional theory (DFT) calculations. Although the imidazolium ligands are not directly capping with the inner CsPbBr₃ NCs, they are important to the formation of these MCs. The MCs exhibit better thermal resistance compared to conventional CsPbBr₃ NCs prepared by the hot-injection method. Additionally, a prototype white light-emitting diode (WLED) was fabricated to demonstrate its practical application prospects. Thanks to the narrow emission bands and enhanced stability of the MCs, the WLED shows greater performance compared to bare perovskite NCs, indicating its great potential as a green phosphor in lighting and display applications.

Highly Efficient and Stable Eu3+-Doped CsPbBr3/Cs4PbBr6 Perovskites for White Light-Emitting Diodes

All-inorganic halide perovskite nanomaterials have a high application potential in the field of display and lighting because of unique photoelectric properties. However, these materials suffer from problems related to poor water and thermal stabilities. In this study, green Eu3+-doped CsPbBr3/Cs4PbBr6 perovskite composites that were synthesized by a saturated recrystallization method at room temperature showed an enhanced photoluminescence quantum yield of 87% and superior water and thermal stabilities to that of undoped perovskites. Finally, green Eu3+-doped CsPbBr3/Cs4PbBr6 perovskite composites were fabricated into white light-emitting diodes (WLEDs) with a wide color gamut (124% of the National Television System Committee standard) and a high efficiency of 43.06 lm/W.

Highly Efficient and Stable CdZnSeS/ZnSeS Quantum Dots for Application in White Light-Emitting Diode

Semiconductor quantum dots (QDs) are a promising luminescent phosphor for next-generation lightings and displays. In particular, QD-based white light-emitting diodes (WLEDs) are considered to be the candidate light sources with the most potential for application in displays. In this work, we synthesized quaternary/ternary core/shell alloyed CdZnSeS/ZnSeS QDs with high bright emission intensity. The QDs show good thermal stability by performing high temperature-dependent experiments that range from 295 to 433 K. Finally, the WLED based on the CdZnSeS/ZnSeS QDs exhibits a luminous efficiency (LE) of 28.14 lm/W, an external quantum efficiency (EQE) of 14.86%, and a warm bright sunlight close to the spectrum of daylight (Commission Internationale de l'éclairage (CIE) coordinates 0.305, 0.371). Moreover, the photoluminescence (PL) intensity, LE, EQE, and correlated color temperature (CCT) of as-prepared QD WLED remained relatively stable with only slight changes in the luminescence stability experiment.

Wavelength-Tunable and Water-Stable Cesium–Lead-Based All-Bromide Nanocrystal–Polymer Composite Films Using Ultraviolet-Curable Prepolymer as an Anti-Solvent

All-inorganic metal halide perovskite nanocrystals (IPeNCs) have become one of the most promising luminescent materials for next-generation display and lighting technology owing to their excellent color expression ability. However, research on IPeNCs with stable blue emission is limited. In this paper, we report stable blue emissive all-bromide IPeNCs obtained through a modified ligand-assisted reprecipitation method using an ultraviolet (UV)-curable prepolymer as the anti-solvent at a low temperature. We found that the blue emission originates from quantum-confined CsPbBr3 nanoparticles formed together with the colorless wide-bandgap Cs4PbBr6 nanocrystals. When the temperature of the prepolymer was increased from 0 to 50 °C, CsPbBr3 nanoparticles became larger and more crystalline, thereby altering their emission color from blue to green. The synthesized all-bromide blue-emitting IPeNC solution remained stable for over 1 h. It also remained stable when it was mixed with the green-emitting IPeNC solution. By simply exposing the as-synthesized IPeNC–prepolymer solutions to UV light, we formed water-stable composite films that emitted red, green, blue, and white colors. We believe that this synthetic method can be used to develop color-emitting composite materials that are highly suitable for application as the color conversion films of full-color liquid crystal display backlight systems and lighting applications.

Understanding the Energy Barriers of the Reversible Ion Exchange Process in CsPbBr1.5Cl1.5@Y2O3:Eu3+ Macroporous Composites and Their Application in Anti-Counterfeiting Codes

The photoinduced reversible ion exchanges in mixed halide perovskites and the resulting luminescent variations make them promising for constructing anti-counterfeiting patterns; however, its understanding in an interfacial view is lacking. In this work, nominal CsPbBr_1.5Cl_1.5 (CPBC) nanocrystals (NCs) were introduced into macroporous Y₂O₃:Eu³⁺ (MYE) to realize emission color variations from red emission of MYE to green emission of halide NCs. The large surface area of MYE helps the formation of Y-Cl/Br bonds which induces fluctuation in the halide composition, while water and intrinsic halogen defects have also been proved to be essential in the reversible ion segregation process. The PL variations of several samples with different pore sizes were investigated upon irradiation of light with different photon energies and excitation power at certain temperatures. According to combined results of density functional theory calculation, the research reveals the presence of two energy barriers that would be overcome correspondingly by the excitation photon and the concentration difference in the ion exchange and recovery process. A photochromic anti-counterfeiting quick response (QR) code was constructed facilely with the perovskite composites. This work provides a deeper understanding from the interfacial aspect and also proposes a feasible strategy to realize reversible PL variation for anti-counterfeiting applications.

Ionic liquid-induced in situ deposition of perovskite quantum dot films with a photoluminescence quantum yield of over 85

Metal halide perovskite quantum dots (QDs) hold great promise as building blocks for next-generation light emitting devices (LEDs). The preparation of perovskite QD films with high photoluminescence quantum yield (PLQY) is the key to realizing efficient LEDs. However, the conventional deposition method of spin-coating of pre-synthesized QD ink solutions results in perovskite QD films with low PLQY (typically <45%) due to non-radiative recombination centers induced in the deposition process. Here, by utilizing the ionic nature and steric hindrance effect of the ionic liquid, we demonstrate an in situ deposition method for perovskite QD films with high PLQY by directly spin-coating precursor solutions containing an ionic liquid. Furthermore, mechanistic study reveals that the ionic liquid not only induces the formation of QDs but also suppresses defect-related recombination through the interaction with uncoordinated metal atoms on the surface of the QDs. As a result, the in situ deposited CsPbBr₃ QD film with a PLQY as high as 85.2% and long-term air stability is achieved. These findings demonstrate that the introduction of an ionic liquid provides an effective strategy to enhance the performance of in situ formed perovskite QD films, which could benefit the development of efficient LEDs and other optoelectronic devices.

On the Role of Cs4PbBr6 Phase in the Luminescence Performance of Bright CsPbBr3 Nanocrystals

CsPbBr3 nanocrystals have been identified as a highly promising material for various optoelectronic applications. However, they tend to coexist with Cs4PbBr6 phase when the reaction conditions are not controlled carefully. It is therefore imperative to understand how the presence of this phase affects the luminescence performance of CsPbBr3 nanocrystals. We synthesized a mixed CsPbBr3-Cs4PbBr6 sample, and compared its photo- and radioluminescence properties, including timing characteristics, to the performance of pure CsPbBr3 nanocrystals. The possibility of energy transfer between the two phases was also explored. We demonstrated that the presence of Cs4PbBr6 causes significant drop in radioluminescence intensity of CsPbBr3 nanocrystals, which can limit possible future applications of Cs4PbBr6-CsPbBr3 mixtures or composites as scintillation detectors.

Improvement in optical properties of Cs4PbBr6 nanocrystals using aprotic polar purification solvent

We demonstrate the influence mechanism on the optical property of Cs₄PbBr₆ during purification of solution with different protonated levels and polarities. During the purification process, organic groups originating from oleic acid (OA) and PbBr impurity on the surface of Cs₄PbBr₆ nanocrystals can be removed using high polarity aprotic and protonic solvents, and the number of Br vacancies (V_Br) can be reduced. The protonic polar solvent can not only etch the organic groups on the surface of nanocrystals, causing surface reconstruction and particle growth of nanocrystals, but also enter into the lattice of Cs₄PbBr₆ and react with the embedded CsPbBr₃. However, aprotic polar solvent decreases the particle size of Cs₄PbBr₆ nanocrystals with the increase in the solvent polarity. The optical properties of Cs₄PbBr₆ can be effectively improved using aprotic polar solvents as a purification solvent, which is very significant to improve the luminescence efficiency of perovskites.

We demonstrate the influence mechanism on the optical properties of Cs₄PbBr₆ during purification of solutions with different protonated levels and polarities.

Fluorescence-enhanced Cs4 PbBr6 /CsPbBr3 composites films synthesized by double-films solid phase reaction method

Due to indispensable ligands, polluted organic solution, or complex vapour deposition, stable CsPbBr₃ film is hard to be prepared directly using a simple and environmentally friendly method. To improve the stability of CsPbBr₃ film and its synthesis methods, the double-films solid phase reaction was developed, and Cs₄ PbBr₆ /CsPbBr₃ composites were designed. Although the synthesized particle had a size of 2-5 μm, much larger than that of quantum dots, in ambient conditions the composites films still showed good photoluminescence properties, with the highest photoluminescence quantum yield of 80%. It had good stability against air, temperature and humidity, and even had interesting fluorescence-enhanced phenomenon after about 4 days.

Electrically Active Defects in Polycrystalline and Single Crystal Metal Halide Perovskite

We studied electrically active defects in CsPbBr3 polycrystalline films and single crystals samples using the thermally stimulated currents (TSC) technique in the temperature range 100–400 K. Below room temperature, both polycrystalline and single-crystals TSC emission is composed by a quasi-continuum of energy levels in the range 0.1–0.3 eV, and capture cross sections ~10−21 cm2. Above room temperature, TSC analysis reveals the presence of defect states in the range 0.40–0.52 eV only in polycrystalline samples, whereas these intermediate energy states are absent in TSC detected in single crystals. In polycrystalline films, the occupancy changes of an energy level at 0.45 eV strongly influences the room temperature photoconductivity, giving rise to slow transients due to defect passivation. In single-crystals, where intermediate energy states are absent, the photoconductivity response during illumination is almost stable and characterized by fast rise/decay times, a promising result for future applications of this material in photodetection and dosimetry.