Blue-emitting and self-assembled thinner perovskite CsPbBr3 nanoplates: synthesis and formation mechanism

Chemical transformation mechanism for blue-to-green emitting CsPbBr3 nanocrystals

Recently, metal-halide perovskites have rapidly emerged as efficient light emitters with near-unity quantum yield and size-dependent optical and electronic properties, which have attracted considerable attention from researchers. However, the ultrafast nucleation rate of ionic perovskite counterparts severely limits the in-depth exploration of the growth mechanism of colloidal nanocrystals (NCs). Herein, we used an inorganic ligand nitrosonium tetrafluoroborate (NOBF4) to trigger a slow post-synthesis transformation process, converting non-luminescent Cs4PbBr6 NCs into bright green luminescent CsPbBr3 NCs to elucidate the concrete transformation mechanism via four stages: (i) the dissociation of pristine NCs, (ii) the formation of Pb-Br intermediates, (iii) low-dimensional nanoplatelets (NPLs) and (iv) cubic CsPbBr3 NCs, corresponding to the blue-to-green emission process. The desorption and reorganization of organic ligands induced by NO+ and the involvement of BF4- in the ligand exchange process played pivotal roles in this dissolution-recrystallization of NCs. Moreover, controlled shape evolution from anisotropic NPLs to NCs was investigated through variations in the amount of NOBF4. This further validates that additives exert a decisive role in the symmetry and growth of nanostructured perovskite crystals during phase transition based on the ligand-exchange mechanism. This finding serves as a source of inspiration for the synthesis of highly luminescent CsPbBr3 NCs, providing valuable insights into the chemical mechanism in post-synthesis transformation.

Real-Time In Situ Observation of CsPbBr3 Perovskite Nanoplatelets Transforming into Nanosheets

The manipulation of nano-objects through heating is an effective strategy for inducing structural modifications and therefore changing the optoelectronic properties of semiconducting materials. Despite its potential, the underlying mechanism of the structural transformations remains elusive, largely due to the challenges associated with their in situ observations. To address these issues, we synthesize temperature-sensitive CsPbBr₃ perovskite nanoplatelets and investigate their structural evolution at the nanoscale using in situ heating transmission electron microscopy. We observe the morphological changes that start from the self-assembly of the nanoplatelets into ribbons on a substrate. We identify several paths of merging nanoplates within ribbons that ultimately lead to the formation of nanosheets dispersed randomly on the substrate. These observations are supported by molecular dynamics simulations. We correlate the various paths for merging to the random orientation of the initial ribbons along with the ligand mobility (especially from the edges of the nanoplatelets). This leads to the preferential growth of individual nanosheets and the merging of neighboring ones. These processes enable the creation of structures with tunable emission, ranging from blue to green, all from a single material. Our real-time observations of the transformation of perovskite 2D nanocrystals reveal a route to achieve large-area nanosheets by controlling the initial orientation of the self-assembled objects with potential for large-scale applications.

Tuning the energy transfer in Ruddlesden-Popper perovskites phases through isopropylammonium addition - towards efficient blue emitters

Here we demonstrate blue LEDs with a peak wavelength of 481 nm, with outstanding colour purity of up to 88% (CIE coordinates (0.1092, 0.1738)), an external quantum yield of 5.2% and a luminance of 8260 cd m^-2. These devices are based on quasi-2D PEA₂(Cs_0.75MA_0.25)Pb₂Br₇, which is cast from solutions containing isopropylammonium (iPAm). iPAm as additive assist in supressing the formation of bulk-like phases, as pointed out by both photophysical and structural characterization. Additionally, the study of the excitation dynamics demonstrates a hindering of the energy transfer to domains of lower energy that generally undermines the performance and emission characteristics of blue-emitting LEDs based on quasi-2D perovskites. The achieved narrow distribution of quantum well sizes and the hindered energy transfer result in a thin film photoluminescence quantum yield exceeding 60%. Our work demonstrates the great potential to tailor the composition and the structure of thin films based on Ruddlesden-Popper phases to boost performance of optoelectronic devices - specifically blue perovskite LEDs.

Atomically flat semiconductor nanoplatelets for light-emitting applications

The last decade has witnessed extensive breakthroughs and significant progress in atomically flat two-dimensional (2D) semiconductor nanoplatelets (NPLs) in terms of synthesis, growth mechanisms, optical and electronic properties and practical applications. Such NPLs have electronic structures similar to those of quantum wells in which excitons are predominantly confined along the vertical direction, while electrons are free to move in the lateral directions, resulting in unique optical properties, such as extremely narrow emission line width, short photoluminescence (PL) lifetime, high gain coefficient, and giant oscillator strength transition (GOST). These unique optical properties make NPLs favorable for high color purity light-emitting applications, in particular in light-emitting diodes (LEDs), backlights for liquid crystal displays (LCDs) and lasers. This review article first introduces the intrinsic characteristics of 2D semiconductor NPLs with atomic flatness. Subsequently, the approaches and mechanisms for the controlled synthesis of atomically flat NPLs are summarized followed by an insight on recent progress in the mediation of core/shell, core/crown and core/crown@shell structures by selective epitaxial growth of passivation layers on different planes of NPLs. Moreover, an overview of the unique optical properties and the associated light-emitting applications is elaborated. Despite great progress in this research field, there are some issues relating to heavy metal elements such as Cd²⁺ in NPLs, and the ambiguous gain mechanisms of NPLs and others are the main obstacles that prevent NPLs from widespread applications. Therefore, a perspective is included at the end of this review article, in which the current challenges in this stimulating research field are discussed and possible solutions to tackle these challenges are proposed.

In situ synthesis of high-quantum-efficiency and stable bromide-based blue-emitting perovskite nanoplatelets

We present a facile synthetic approach for the growth of two-dimensional CsPbBr₃ nanoplatelets (NPLs) in the temperature range of 50-80 °C via the vacuum-assisted low-temperature (VALT) method. In this method, we utilized the solubility of the PbBr₂ precursor at temperatures high than the reaction temperature, thus making Br available during the reaction to form NPLs with fewer defects. The high chemical availability of Br during the reaction changes the growth dynamics and formation of highly crystalline nanoplatelets. Using this method, we have synthesized NPLs with an emission wavelength range of 450 to 485 nm that have high photoluminescence quantum yields (PLQY) from 80 to 100%. The synthesized NPLs retain their initial PLQY of about 80% after one month at ambient conditions. The formation of NPLs with fewer defects and enhanced radiative recombination was further confirmed by X-ray diffraction (XRD), reduced Urbach energy, time-resolved photocurrent measurements, X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared (FTIR) spectroscopy. Additionally, we utilized the synthesized NPLs for the fabrication of down-conversion light emitting diodes (LEDs), and the electroluminescence peak was barely shifted compared to the photoluminescence peak.

Enhance luminescence or change morphology: effect of the doping method on Cu2+-doped CsPbBr3 perovskite nanocrystals

The effect of Cu2+ on CsPbBr3 nanocrystals is compared between the hot-injection method and postsynthetic cation-exchange reaction.

Electrically Switchable Amplified Spontaneous Emission from Lead Halide Perovskite Film

Electrically tunable optical devices that allow for modulation and detection of the optical signals would be extremely beneficial for the next photonic and electronic technologies. Perovskite materials as an emerging excitonic one provide promising platforms because they offer excitons manipulated by an external electrical field and efficient coupling to light. However, so far, electrically modulated switches based on perovskite amplified spontaneous emission (ASE) still remain unexplored. Here, we prepared perovskite films on indium tin oxide substrates by a spin-coating method and characterized their ASE behaviors. Based on it, we designed and fabricated electrically switchable ASE devices of perovskite film based on a light-emitting diode device configuration. Under the externally applied current, this device exhibits good controllable optoelectronic switching behaviors. Furthermore, this photoelectric response can be modulated by the different current densities. Our strategy for electrically switchable perovskite ASE will promote integrated applications in optoelectronic devices and provide valuable experience for the development of electrically pumped perovskite lasers.

Self-Assembly of CsPbBr3 Nanocubes into 2D Nanosheets

All-inorganic metal halide perovskites have attracted considerable attention due to their high application potentials in optoelectronics, photonics, and energy conversion. Herein, two-dimensional (2D) CsPbBr₃ nanosheets with a thickness of about 3 nm have been synthesized through a simple chemical process based on a hot-injection technique. The lateral dimension of CsPbBr₃ nanosheets ranges from 11 to 110 nm, which can be tuned by adjusting the ratio of short ligands (octanoic acid and octylamine) over long ligands (oleic acid and oleylamine). The nanosheets result from the self-assembly of CsPbBr₃ nanocubes with an edge length of about 3 nm, which possess the same crystal orientation. In addition, an amorphous region of about 1 nm in width is found between adjacent nanocubes. To investigate both the structure and the growth mechanism of these nanosheets, microstructural characterizations at the atomic scale are conducted, combined with X-ray diffraction analysis, ¹H nuclear magnetic resonance (¹H NMR) measurement, and density functional theory (DFT) calculation, aiming to determine the configuration of different ligands adsorbed onto CsPbBr₃. Our results suggest that the adjacent nanocubes are mainly connected together by short ligands and inclined long ligands. On the basis of the DFT calculation results, a relationship is derived for the volume ratio of short ligands over long ligands and the lateral dimensions of CsPbBr₃ nanosheets. Moreover, a physicochemical mechanism is proposed to explain the 2D growth of CsPbBr₃ nanosheets. Such a finding provides new insights regarding the well-ordered self-arrangement of CsPbBr₃ nanomaterials, as well as new routes to synthesize 2D CsPbX₃ (X = Cl and I) nanosheets of suitable dimensions for specific and large-scale applications.

Strong Polarized Photoluminescence CsPbBr3 Nanowire Composite Films for UV Spectral Conversion Polarization Photodetector Enhancement

In this work, we proposed a fluorescence conversion layer with polarization characteristics to enhance UV polarization detection for the first time. To achieve this goal, the colloidal lead halide CsPbBr₃ nanowires (NWs) with appropriate lengths were synthesized by the method of ultrasonication synthesis assisted by the addition of hydrobromic acid (HBr) ligands. By adding HBr, the properties of synthesized NWs are improved, and due to the controllable perovskite-stretched NWs, polymer composite films were fabricated, which can generate photoluminescence (PL) with strong polarization. The optimized stretched composite film can achieve a polarization degree of 0.42 and dichroism ratio (I_∥/I_⊥) of 2.49 at 520 nm. Based on this film, an imaging system with polarization-selective properties and efficient UV spectral conversion was developed. The spectrum conversion of 266 to 520 nm luminescence wavelength was realized and sensitive to the polarization of incoming 266 nm UV light. The experimental results also showed that the response after spectral conversion is greatly improved, and different responsivities can correspond to different polarization states. This imaging system overcomes the insufficiency of the conventional charge coupled device (CCD), which makes it difficult to receive the optical signal for high-quality UV imaging. The use of light conversion films with polarization characteristics for polarized UV imaging is of great significance for improving the detection of solar-blind UV bands and the recognition of military targets.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Highly efficient and blue-emitting CsPbBr3 quantum dots synthesized by two-step supersaturated recrystallization

Highly efficient and blue-emitting CsPbBr₃ quantum dots were successfully synthesized by two-step supersaturated recrystallization under ambient condition. This method could control the particle size within 2.8 nm, thus resulting in strong quantum confinement effect of the products. The as-synthesized CsPbBr₃ quantum dots presented outstanding optical properties with highest photo-luminescence quantum yield of 87.20% and longest PL lifetime of 12.24 ns. The blue light-emitting diode made from the CsPbBr₃ quantum dots exhibited a CIE coordinate (0.14, 0.10), in good agreement with the standard blue CIE coordinate (0.14, 0.08) of National Television System Committee (NTSC).

Emission wavelength control of CsPb(Br1−xClx)3 nanocrystals for blue light-emitting diode applications

A facile synthetic method of CsPb(Br_1−xCl_x)₃ halide perovskite nanocrystals, which emit light with the wavelengths ranging from green to blue based on an anion exchanging reaction using a halide exchange additive was reported.