Near-Infrared Light-Induced Reversible Deactivation Radical Polymerization: Expanding Frontiers in Photopolymerization

Photoinduced reversible deactivation radical polymerization (photo-RDRP) or photoinduced controlled/living radical polymerization has emerged as a versatile and powerful technique for preparing functional and advanced polymer materials under mild conditions by harnessing light energy. While UV and visible light (λ = 400-700 nm) are extensively employed in photo-RDRP, the utilization of near-infrared (NIR) wavelengths (λ = 700-2500 nm) beyond the visible region remains relatively unexplored. NIR light possesses unique properties, including enhanced light penetration, reduced light scattering, and low biomolecule absorption, thereby providing opportunities for applying photo-RDRP in the fields of manufacturing and medicine. This comprehensive review categorizes all known NIR light-induced RDRP (NIR-RDRP) systems into four mechanism-based types: mediation by upconversion nanoparticles, mediation by photocatalysts, photothermal conversion, and two-photon absorption. The distinct photoinitiation pathways associated with each mechanism are discussed. Furthermore, this review highlights the diverse applications of NIR-RDRP reported to date, including 3D printing, polymer brush fabrication, drug delivery, nanoparticle synthesis, and hydrogel formation. By presenting these applications, the review underscores the exceptional capabilities of NIR-RDRP and offers guidance for developing high-performance and versatile photopolymerization systems. Exploiting the unique properties of NIR light unlocks new opportunities for synthesizing functional and advanced polymer materials.

Stimuli-Responsive and Multifunctional Nanogels in Drug Delivery

Nanogels represent promising drug delivery systems in the biomedical field, designed to overcome challenges associated with standard treatment approaches. Stimuli-responsive nanogels, often referred to as intelligent materials, have garnered significant attention for their potential to enhance control over properties such as drug release and targeting. Furthermore, researchers have recently explored the application of nanogels in diverse sectors beyond biomedicine including sensing materials, catalysts, or adsorbents for environmental applications. However, to fully harness their potential as practical delivery systems, further research is required to better understand their pharmacokinetic behaviour, interactions between nanogels and bio distributions, as well as toxicities. One promising future application of stimuli-responsive multifunctional nanogels is their use as delivery agents in cancer treatment, offering an alternative to overcome the challenges with conventional approaches. This review discusses various synthetic methods employed in developing nanogels as efficient carriers for drug delivery in cancer treatment. The investigations explore, the key aspects of nanogels, including their multifunctionality and stimuli-responsive properties, as well as associated toxicity concerns. The discussions presented herein aim to provide the readers a comprehensive understanding of the potential of nanogels as smart drug delivery systems in the context of cancer therapy.

Reversed Controlled Polymerization (RCP): Depolymerization from Well-Defined Polymers to Monomers

Controlled polymerization methods are well-established synthetic protocols for the design and preparation of polymeric materials with a high degree of precision over molar mass and architecture. Exciting recent work has shown that the high end-group fidelity and/or functionality inherent in these techniques can enable new routes to depolymerization under relatively mild conditions. Converting polymers back to pure monomers by depolymerization is a potential solution to the environmental and ecological concerns associated with the ultimate fate of polymers. This perspective focuses on the emerging field of depolymerization from polymers synthesized by controlled polymerizations including radical, ionic, and metathesis polymerizations. We provide a critical review of current literature categorized according to polymerization technique and explore numerous concepts and ideas which could be implemented to further enhance depolymerization including lower temperature systems, catalytic depolymerization, increasing polymer scope, and controlled depolymerization.

Ultrasensitive Reagent for Ratiometric Detection and Detoxification of III in Water and Mitochondria

Toxicity induced by inorganic arsenic as AsO₃^3- (iAs^III) is of global concern. Reliable detection of the maximum allowed contaminant level for arsenic in drinking water and in the cellular system remains a challenge for the water quality management and assessment of toxicity in the cellular milieu, respectively. A new Ir(III)-based phosphorescent molecule (AS-1; λ_Ext = 415 nm and λ_Ems = 600 nm, Φ = 0.3) is synthesized for the selective detection of iAs^III in an aqueous solution with a ratiometric luminescence response even in the presence of iAs^V and all other common inorganic cations and anions. The relatively higher affinity of the thioimidazole ligand (HPBT) toward iAs^III led to the formation of a fluorescent molecule iAs^V-HPBT (λ_Ext = 415 nm and λ_Ems = 466 nm, Φ = 0.28) for the reaction of iAs^III and AS-1. An improved limit of quantitation (LOQ) down to 0.2 ppb is achieved when AS-1 is used in the CTAB micellar system. Presumably, the cationic surfactants favor the localization of AS-1@CTAB^Micelle in mitochondria of MCF7 cells, and this is confirmed from the images of the confocal laser fluorescence scanning microscopic studies. Importantly, cell viability assay studies confirm that AS-1@CTAB^Micelle induces dose-dependent detoxification of iAs^III in live cells. Further, luminescence responses at 466 nm could be utilized for developing a hand-held device for the in-field application. Such a reagent that allows for ratiometric detection of iAs^III with LOQ of 2.6 nM (0.5 ppb) in water, as well as helps in visualizing its distribution in mitochondria with a detoxifying effect, is rather unique in contemporary literature.

Linear Block Copolymer Synthesis

Block copolymers form the basis of the most ubiquitous materials such as thermoplastic elastomers, bridge interphases in polymer blends, and are fundamental for the development of high-performance materials. The driving force to further advance these materials is the accessibility of block copolymers, which have a wide variety in composition, functional group content, and precision of their structure. To advance and broaden the application of block copolymers will depend on the nature of combined segmented blocks, guided through the combination of polymerization techniques to reach a high versatility in block copolymer architecture and function. This review provides the most comprehensive overview of techniques to prepare linear block copolymers and is intended to serve as a guideline on how polymerization techniques can work together to result in desired block combinations. As the review will give an account of the relevant procedures and access areas, the sections will include orthogonal approaches or sequentially combined polymerization techniques, which increases the synthetic options for these materials.

Photoinduced Organocatalyzed Atom Transfer Radical Polymerization (O-ATRP): Precision Polymer Synthesis Using Organic Photoredox Catalysis

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

Expanding monomer scope and enabling post-modification in photocontrolled radical ring-opening polymerization of vinylcyclopropanes by an iodine transfer strategy

Visible light-driven iodine transfer polymerization provides efficient and unique access to novel poly(vinylcyclopropanes) with enhanced material properties.

Reversible complexation mediated polymerization: an emerging type of organocatalytically controlled radical polymerization

Reversible complexation mediated polymerization (RCMP) was developed as a new class of controlled radical polymerization (CRP) using organic catalysts. In particular, photo-RCMP is among the simplest, cheapest, and most robust photoinduced CRPs.

Well-defined amine-reactive polymethacrylates through organocatalyzed controlled radical polymerization

A novel alkyl iodide bearing an azlactone group was successfully employed as a reversible complex-mediated polymerization (RCMP) initiator for synthesizing for the first-time well-defined α-azlactone-terminated polymethacrylates (Đ < 1.30). The amine-scavenging ability of the resulting functional polymers was demonstrated by using benzylamine.

Synthesis of micrometer-sized poly(vinyl acetate) particles through microsuspension iodine transfer polymerization: effect of iodine species in a water medium

Schematic of the behaviors of iodine species in the microsuspension polymerization of vinyl acetate (VAc) in an aqueous medium.

Synthesis of Nanogels: Current Trends and Future Outlook

Nanogels represent an innovative platform for tunable drug release and targeted therapy in several biomedical applications, ranging from cancer to neurological disorders. The design of these nanocarriers is a pivotal topic investigated by the researchers over the years, with the aim to optimize the procedures and provide advanced nanomaterials. Chemical reactions, physical interactions and the developments of engineered devices are the three main areas explored to overcome the shortcomings of the traditional nanofabrication approaches. This review proposes a focus on the current techniques used in nanogel design, highlighting the upgrades in physico-chemical methodologies, microfluidics and 3D printing. Polymers and biomolecules can be combined to produce ad hoc nanonetworks according to the final curative aims, preserving the criteria of biocompatibility and biodegradability. Controlled polymerization, interfacial reactions, sol-gel transition, manipulation of the fluids at the nanoscale, lab-on-a-chip technology and 3D printing are the leading strategies to lean on in the next future and offer new solutions to the critical healthcare scenarios.

Synthesis of Micrometer-Sized Poly(methyl acrylate) by Temperature-Step Microsuspension Polymerization with Iodoform Based on the "Radical Exit Depression" Effect§

Previously, we have reported the successful preparation of micrometer-sized poly(methyl methacrylate) particles without submicrometer-sized byproduct particles by microsuspension iodine-transfer polymerization (ms ITP), in which the radical exit depression (RED) effect was expected, with the benzoyl peroxide initiator at 8 wt % relative to the monomer. However, it was difficult to apply it simply under a similar condition for methyl acrylate (MA), which is more hydrophilic than methyl methacrylate (MMA), because the polymerization rate in the water phase (R_p^w) arising from the oligomer radicals exiting from the monomer droplets is high, resulting in a lot of submicrometer-sized byproduct particles. In this study, the problem was overcome by utilizing a two-step temperature process in the microsuspension polymerization with iodoform (ms I) of MA, which supports the proposed mechanism in the ms ITP of MMA in the previous paper. Although the control of the molecular weight (M_n) and the molecular weight distribution (M_n/M_w) was restricted, the preparation of micrometer-sized particles without byproduct particles was realized and a high conversion was reached within a practical time that meets the demands of the industry by utilizing the ms I. The optimal conditions for MA were 70 °C for 2 h, followed by 80 °C for 4 h with a high content of initiator (8 wt % relative to a monomer).

Photocontrolled bromine–iodine transformation reversible-deactivation radical polymerization: facile synthesis of star copolymers and unimolecular micelles

A facile strategy of synthesizing star copolymers was successfully established via photocontrolled BIT-RDRP. The obtained copolymers have well-defined four-arm amphiphilic block architecture and can form stable unimolecular micelles in water.

A covalent organic framework as a photocatalyst for atom transfer radical polymerization under white light irradiation

TFPPy-Td-COFs have been synthesized to serve as heterogeneous photocatalysts for mediating photo-induced ATRP with copper as a co-catalyst under white light irradiation.

Iodine-Transfer Polymerization (ITP) of Ethylene and Copolymerization with Vinyl Acetate

Controlled radical polymerization of ethylene using different commercially available, cheap, and non-toxic iodo alkyls is performed by iodine transfer polymerization (ITP) under mild conditions (≤100 °C and ≤200 bar). The formed well-defined iodo end-capped polyethylene (PE-I) species is very stable upon storage. Narrow molar-mass distributions (dispersities around 1.6) were obtained up to number average molar masses of 7300 g mol^-1 . The ethylene copolymerization by ITP (ITcoP) with vinyl acetate allowed to form a broad range of poly(ethylene-co-vinyl acetate) (EVA) containing from 0 to 85 mol % of VAc unit. In addition, EVA-b-PE block copolymers or EVA-b-EVA gradient block copolymers with different content of VAc in the blocks were obtained for the first time using ITP. Finally, reactivity trends were explored by a theoretical mechanistic study. This highly versatile synthetic platform provides a straightforward access to a diverse range of well-defined PE based polymer materials.

Micellar Organocatalysis Using Smart Polymer Supports: Influence of Thermoresponsive Self-Assembly on Catalytic Activity

Micellar catalysts with a switchable core are attractive materials in organic synthesis. However, little is known about the role of the shell forming block on the performance of the catalyst. Thermoresponsive block copolymers based on poly(N-isopropylacrylamide-co-vinyl-4,4-dimethylazlactone) attached to different permanently hydrophilic blocks, namely poly(ethylene glycol), poly(N,N-dimethylacrylamide), and poly(2,3-dihydroxypropyl acrylate), were successfully synthesized via reversible addition/fragmentation chain transfer radical polymerization (RAFT). Post-polymerization attachment of an amino-functionalized L-prolineamide using the azlactone ring-opening reaction afforded functionalized thermoresponsive block copolymers. Temperature-induced aggregation of the functionalized block copolymers was studied using dynamic light scattering. It was shown that the chemical structure of the permanently hydrophilic block significantly affected the size of the polymer self-assemblies. The functionalized block copolymers were subjected to an aldol reaction between p-nitrobenzaldehyde and cyclohexanone in water. Upon temperature-induced aggregation, an increase in conversion was observed. The enantioselectivity of the polymer-bound organocatalyst improved with an increasing hydrophilic/hydrophobic interface as a result of the different stability of the polymer aggregates.

Photocontrolled Iodine-Mediated Reversible-Deactivation Radical Polymerization: Solution Polymerization of Methacrylates by Irradiation with NIR LED Light

Herein, near-infrared (NIR) photocontrolled iodide-mediated reversible-deactivation radical polymerization (RDRP) of methacrylates, without an external photocatalyst, was developed using an alkyl iodide (e.g., 2-iodo-2-methylpropionitrile) as the initiator at room temperature. This example is the first use of a series of special solvents containing carbonyl groups (e.g., 1,3-dimethyl-2-imidazolidinone) as both solvent and catalyst for photocontrolled RDRP using long-wavelength (λ_max =730 nm) irradiation. The polymerization system comprises monomer, alkyl iodide initiator, and solvent. Well-defined polymers were synthesized with excellent control over the molecular weights and molecular weight distributions (M_w /M_n <1.21). The living features of this system were confirmed by polymerization kinetics, multiple controlled "on-off" light switching cycles, and chain extension experiments. Importantly, the polymerizations proceeded successfully with various barriers (pork skin and A4 paper), demonstrating the advantage of high-penetration NIR light.

Polymer Networks: From Plastics and Gels to Porous Frameworks

Polymer networks, which are materials composed of many smaller components-referred to as "junctions" and "strands"-connected together via covalent or non-covalent/supramolecular interactions, are arguably the most versatile, widely studied, broadly used, and important materials known. From the first commercial polymers through the plastics revolution of the 20^th century to today, there are almost no aspects of modern life that are not impacted by polymer networks. Nevertheless, there are still many challenges that must be addressed to enable a complete understanding of these materials and facilitate their development for emerging applications ranging from sustainability and energy harvesting/storage to tissue engineering and additive manufacturing. Here, we provide a unifying overview of the fundamentals of polymer network synthesis, structure, and properties, tying together recent trends in the field that are not always associated with classical polymer networks, such as the advent of crystalline "framework" materials. We also highlight recent advances in using molecular design and control of topology to showcase how a deep understanding of structure-property relationships can lead to advanced networks with exceptional properties.

One-Step Photocontrolled Polymerization-Induced Self-Assembly (Photo-PISA) by Using In Situ Bromine-Iodine Transformation Reversible-Deactivation Radical Polymerization

Polymerization-induced self-assembly (PISA) has become an effective strategy to synthesize high solid content polymeric nanoparticles with various morphologies in situ. In this work, one-step PISA was achieved by in situ photocontrolled bromine-iodine transformation reversible-deactivation radical polymerization (hereinafter referred to as Photo-BIT-RDRP). The water-soluble macroinitiator precursor α-bromophenylacetate polyethylene glycol monomethyl ether ester (mPEG1k-BPA) was synthesized in advance, and then the polymer nanomicelles (mPEG1k-b-PBnMA and mPEG1k-b-PHPMA, where BnMA means benzyl methacrylate and HPMA is hydroxypropyl methacrylate) were successfully formed from a PISA process of hydrophobic monomer of BnMA or HPMA under irradiation with blue LED light at room temperature. In addition, the typical living features of the photocontrolled PISA process were confirmed by the linear increase of molecular weights of the resultant amphiphilic block copolymers with monomer conversions and narrow molecular weight distributions (Mw/Mn < 1.20). Importantly, the photocontrolled PISA process is realized by only one-step method by using in situ photo-BIT-RDRP, which avoids the use of transition metal catalysts in the traditional ATRP system, and simplifies the synthesis steps of nanomicelles. This strategy provides a promising pathway to solve the problem of active chain end (C-I) functionality loss in two-step polymerization of BIT-RDRP.

Iodine-mediated photoATRP in aqueous media with oxygen tolerance

Iodine-mediated photoATRP was conducted in aqueous media enabling fast and well-controlled polymerizations under visible light without deoxygenation.

Photocontrolled iodine-mediated reversible-deactivation radical polymerization with a semifluorinated alternating copolymer as the macroinitiator

A novel strategy for preparing block copolymers with semifluorinated alternating copolymers as macroinitiators was established by photocontrolled iodine-mediated RDRP under irradiation with blue LED light at room temperature.

Facile synthesis of poly(N-vinyl pyrrolidone) block copolymers with “more-activated” monomers by using photoinduced successive RAFT polymerization

Well-defined PNVP block copolymers with more-activated monomers were synthesized by a single RAFT polymerization method under irradiation with visible light at room temperature.

Iodine-mediated photo-controlled atom transfer radical polymerization (photo-ATRP) and block polymerization combined with ring-opening polymerization (ROP) via a superbase

Most organocatalysts for photo-controlled atom transfer radical polymerization (photo-ATRP) are metal complexes or synthetically elaborate organic dyes, which are toxic and expensive.

Carboxylate, nitrate, sulfonate, and phosphate catalysts for living radical polymerization via oxygen–iodine halogen bonding catalysis

Oxyanions, i.e., carboxylate, nitrate, phosphate, and sulfonate, were used for halogen-bonding-catalyzed living radial polymerization, giving low-dispersity polymethacrylates, polystyrene, and polyacrylonitrile homopolymers and block copolymers.

Cationic quaternary ammonium salt-catalyzed LED-induced living radical polymerization within situhalogen exchange

Cationic quaternary ammonium salts were employed as organocatalysts for light-emitting diode (LED)-induced living radical polymerization (LRP) with thein situhalogen exchange of methacrylate monomers.

Photocontrolled Iodine-Mediated Green Reversible-Deactivation Radical Polymerization of Methacrylates: Effect of Water in the Polymerization System

Photocontrolled iodine-mediated reversible-deactivation radical polymerization (RDRP) is a facile and highly efficient access to precision polymers. Herein, a facile photocontrolled iodine-mediated green RDRP strategy was successfully established in water by using 2-iodo-2-methylpropionitrile (CP-I) as the initiator and water-soluble functional monomers including poly(ethylene glycol) methyl ether methacrylate (PEGMA), 2-hydroxyethyl methacrylate (HEMA), and 2-hydroxypropyl methacrylate (HPMA) as the model monomers under blue-light-emitting diode (LED) irradiation at room temperature. Well-defined polymers (PPEGMA, PHEMA, PHPMA) with narrow polydispersities (1.09-1.21) were obtained, and amphiphilic block copolymers which can form nanospheres in situ in water (PPEGMA-b-poly(benzyl methacrylate) (PPEGMA-b-PBnMA) and PPEGMA-b-PHPMA) were prepared. To explore the role of water in our polymerization, control experiments were successfully carried out by using oil-soluble monomer methyl methacrylate (MMA) with the help of trace amounts of water. Notably, the green solvent-water-has an additionally positive effect in accelerating the polymerization and makes our polymerization system an environmentally friendly polymerization system. Therefore, this simple strategy conducted in the presence of water enables the green preparation of well-defined water-soluble or water-insoluble polymers and clean synthesis of amphiphilic copolymer nanoparticles in situ.