Bimetallic constrained aluminum alkoxide complexes for ring-opening polymerization of cyclic esters: activity enhancement via cationic activation

Dinuclear aluminum complexes bearing a constrained 'indanimine' ligand based on a short hydrazine bridge were synthesized. Single-crystal X-ray crystallography reveals bimetallic penta-coordinated aluminum centers having a distorted trigonal bipyramidal geometry. A short Al-Al distance of 4.1 Å was observed due to a highly rigid framework and a short hydrazine bridging moiety. The bimetallic aluminum isopropoxide complex reacted with N,N-dimethylanilinium tetrakis(pentafluorophenyl)borate (DMFB) giving an activated aluminum species via a proton abstraction by isopropoxide. The activated complex was shown to be significantly more active in the ring-opening polymerization (ROP) of ε-caprolactone (CL) and δ-valerolactone (VL) compared to the original non-activated aluminum alkoxide complex. On the other hand, the ROP of L-lactide (LA) by the activated complex completely shut down the polymerization possibly due to a strong coordination of the adjacent ester group to the cationic aluminum center. This unique behavior of LA was then applied as an inhibitor in the ROP of CL. Therefore, the ongoing ROP of CL was shown to switch off immediately when LA was added (OFF mode). The polymerization may resume only when the temperature is increased to 90 °C (ON mode) giving an example of ON/OFF switchable ring-opening polymerization.

The Effect of Alkyl Substituents on the Formation and Structure of Homochiral (R*,R*)-[R2Ga(µ-OCH(Me)CO2R')]2 Species-Towards the Factors Controlling the Stereoselectivity of Dialkylgallium Alkoxides in the Ring-Opening Polymerization of rac-Lactide

Building on our previous studies, which have demonstrated that homochiral propagating species-(R*,R*)-[Me2Ga(µ-OCH(Me)CO2R)]2-were crucial for the heteroselectivity of [Me2Ga(µ-OCH(Me)CO2Me)]2 in the ring-opening polymerization (ROP) of racemic lactide (rac-LA), we have investigated the effect of alkyl groups on the structure and catalytic properties of dialkylgallium alkoxides in the ROP of rac-LA. Therefore, we have isolated and characterized the rac-[R2Ga(µ-OCH(Me)CO2Me]2 (R = Et (1), iPr (2) and rac-[R2Ga(µ-OCH(Me)C5H4N]2 (R = Et (3), iPr (4)) complexes, to demonstrate the effect of alkyl groups on the chiral recognition induced the formation of the respective homochiaral species-(R*,R*)-[R2Ga(µ-OCH(Me)CO2Me)]2 and (R*,R*)-[R2Ga(µ-OCH(Me)C5H4N]2. Moreover, we have investigated the structure of (S,S)-[R2Ga(µ-OCH(Me)CO2Me]2 (R = Et ((S,S)-1, R = iPr ((S,S)-2,) and their catalytic activity in the ROP of rac-LA. With an increase in the bulkiness of alkyl substituents on gallium the following can be observed: (a) the tendency for the formation of homochiral complexes decreased, (b) the symmetry of homochiral (S,S)-[R2Ga(µ-OCH(Me)CO2Me]2 (M = Me, Et (S,S)-1), iPr (S,S)-2) changed, and both have resulted in (c) lower or no heteroselectivtity across these complexes in the ROP of rac-LA. Importantly, the results have confirmed the crucial role of the chiral-induced formation of homochiral asymmetric dimers on the heteroselectivity of dialkylgallium alkoxides in the ROP of rac-LA.

Ring-opening polymerization of ε-caprolactone with a macrocyclic tetracarbene indium complex

The first chiral tetracarbene indium(III) complexes have been synthesized by employing a rigid dianionic macrocyclic tetra-NHC ligand. The macrocyclic indium tetra-NHC bromide and ethoxide complexes are structurally similar to analagous salen complexes. The indium ethoxide complex effectively promotes living ring-opening polymerization of ε-caprolactone at room temperature.

An aniline-bridged bis(pyrazolyl)alkane ligand for dizinc-catalysed ring-opening polymerization

We report an aniline ligand (1) with two bis(pyrazolyl)alkane arms, and its cationic, dizinc complexes. XRD, NMR, and modelling of the dizinc complexes resulted in an unprecedented, dynamic μ-anilide core. Compared with published μ-phenolate analogues, our μ-anilide complexes show higher activity and divergent counterion trends in ring-opening polymerization of rac-lactide.

Intensive Cycloalkyl-Fused Pyridines for Aminopyridyl-Zinc-Heteroimidazoles Achieving High Efficiency toward the Ring-Opening Polymerization of Lactides

The model precatalyst sp3- and sp2-N dinitrogen-coordinated zinc-heteroimidazole has been used as an efficient catalyst for the ring-opening polymerization of cyclic esters. Subsequent to our exceptional active 5,6,7-trihydroquinolin-8-amine-zinc catalysts for the ring-opening polymerization (ROP) of ε-caprolactone, various pyridine-fused cycloalkanones (ring size from five to eight) are developed for the correspondent fused amine-pyridine derivatives and their zinc-heteroimidazole chloride complexes Zn1-Zn8 (LZnCl2) bearing N-diphenylphosphinoethyl pendants. Activated with two equivalents of LiN(SiMe3)2, the title zinc complexes efficiently promote the ROP of L-lactide (L-LA) in situ; among them, Zn4/2Li(NSiMe3)2 catalyzed 500 equivalent L-LA at 80 °C with 92% conversion in 5 min (TOF: 5520 h-1). Under the same conditions, the catalytic efficiency for the ROP of rac-LA by Zn1-Zn8/2Li(NSiMe3)2 was slightly lower than that for L-LA (highest TOF: 4440 h-1). In both cases, cyclooctyl-fused pyridyl-zinc complexes exhibited higher activity than others, while the cycloheptyl-fused zinc complexes showed the lowest activity. The microstructure analysis of the polymers showed they possessed a linear structure capped with CH3O as major and cyclic structure as minor. In this work, all the ligands and zinc complexes were well characterized by 1H/13C/31P NMR, FT-IR spectroscopy as well as elemental analysis.

Aluminium complexes of phenoxy-azo ligands in the catalysis of rac-lactide polymerisation

Fourteen new phenoxy-azo aluminium complexes comprising two series, namely, dimethyl{phenoxy-azo}aluminium complexes 1a-7a and monomethyl{phenoxy-azo}aluminium complexes 1b-7b, were successfully synthesised and characterised. The molecular structure of complex 4a, determined using X-ray diffraction analysis, displayed a distorted tetrahedral geometry. The 1H NMR spectrum of complex 5b revealed fluxional behaviour caused by isomeric transformation that occurs in the solution at room temperature. The activation parameters determined by lineshape analysis of variable-temperature 1H NMR spectra in toluene-d8 are as follows: ΔH‡ = 70.05 ± 1.19 kJ mol-1, ΔS‡ = 21.78 ± 3.58 J mol-1 K-1 and ΔG‡ (298 K) = 63.56 ± 0.11 kJ mol-1. All aluminium complexes are active initiators for the ring-opening polymerisation of rac-lactide, and the polymerisations proceeded in a controlled manner and were living. In comparison, the catalytic activity of the dimethyl{phenoxy-azo}aluminium complexes was insignificantly different from that of the corresponding monomethyl{phenoxy-azo}aluminium complexes. The steric factor of the ortho-phenoxy substituent was observed to exert a decelerating effect on the catalytic rate. Kinetic investigations revealed first-order dependency on both monomer and initiator concentrations. Comparative catalytic investigations conducted on phenoxy-azo aluminium and phenoxy-imine aluminium complexes revealed that the former complexes exhibited lower catalytic activity.

Crafting sustainable solutions: architecting biodegradable copolymers through controlled ring-opening copolymerization

Polylactic acid (PLA) is a biodegradable and biocompatible polymer with versatile applications in packaging and medicine. It is derived from lactic acid and thus represents an eco-friendly option sourced from renewable raw materials. Despite its advantages, PLA exhibits few drawbacks, such as brittleness and relatively high melting and glass transition temperatures. However, these limitations can be addressed through copolymerization with other monomers like ε-caprolactone (ε-CL), resulting in a composite material with improved physical properties. This paper comprehensively reviews achievements in PLA-PCL copolymerization using organometallic catalysts, discussing scientific findings and various copolymer architectures obtained, including random or block configurations. It also demonstrates various sustainable catalysts for achieving the required microstructure under mild reaction conditions without the aid of any external initiator.

Tunable zinc benzamidinate complexes: coordination modes and catalytic activity in the ring-opening polymerization of L-lactide

Seven asymmetric zinc benzamidinate complexes featuring or lacking side-arm functionalities were synthesized. Using equimolar zinc reagent produced distinct dinuclear motifs [(C6H5-C = NC6H5)ZnEt]2 (R = tBu, 1; (CH2)2OMe, 2; (CH2)2NMe2, 3). Half the zinc reagent yielded dinuclear [(C6H5-C = NC6H5)2Zn]2 (R = tBu, 4) or mononuclear zinc bis(chelate) complexes (R = (CH2)2OMe, 5; (CH2)2NMe2, 6; CH2Py, 7). Molecular structures of 1-4 and 7 were determined via single-crystal X-ray diffraction. Altering benzamidinate substituents modifies both coordination modes and catalytic activities in ring-opening polymerization of L-lactide. Specifically, complex 7 exhibits enhanced catalytic activity at 25 °C using 100 equivalents of L-lactide with a turnover frequency of 1820 h-1.

Reaction of Ph2C(X)(CO2H) (X = OH, NH2) with [VO(OR)3] (R = Et, nPr): structure, magnetic susceptibility and ROP capability

Reaction of [VO(OR)3] (R = Et, nPr) with 2,2'-diphenylglycine afforded the alkoxide-bridged dimers {[VO(OR)(μ-OR)][Ph2C(NH2)(CO2)]}2, whereas use of benzilic acid, in the presence of alkali metals, afforded 16-membered metallocycles {V8(O)4M(OR)8[Ph2C(OH)(CO2)]12} (M = <1 Na, K). For the ring systems, magnetic susceptibility data is consistent with mixed-valence vanadium with an average oxidation state of 3.5. The dimer and ring systems are capable of the ring opening polymerisation (ROP) of ε-caprolactone under N2, air, or as melts affording mostly low to medium molecular weight cyclic and linear products.

Exploiting Multimetallic Cooperativity in the Ring-Opening Polymerization of Cyclic Esters and Ethers

The use of multimetallic complexes is a rapidly advancing route to enhance catalyst performance in the ring-opening polymerization of cyclic esters and ethers. Multimetallic catalysts often outperform their monometallic analogues in terms of reactivity and/or polymerization control, and these improvements are typically attributed to "multimetallic cooperativity". Yet the origins of multimetallic cooperativity often remain unclear. This review explores the key factors underpinning multimetallic cooperativity, including metal-metal distances, the flexibility, electronics and conformation of the ligand framework, and the coordination environment of the metal centers. Emerging trends are discussed to provide insights into why cooperativity occurs and how to harness cooperativity for the development of highly efficient multimetallic catalysts.

Flexible NHC-aryloxido aluminum complex and its zwitterionic imidazolium aluminate precursor in ring-opening polymerization of ε-caprolactone

Anionic donor-functionalized NHC (N-heterocyclic carbene) complexes of Al are rare. We report one such case here, an NHC-aryloxido AlMe2 complex [Al(L)Me2] (2), following a stepwise synthesis from the proligand [HO-4,6-tBu2-C6H2-2-CH2{CH(NCHCHNAr)}]Br [LH2Br; Ar = 2,6-iPr2-C6H3 (Dipp)] and AlMe3via the zwitterionic intermediate [Al(LH)Me2Br] (1). The ligand's flexibility in 2 is evident from the conformational fluxionality revealed by VT-1H NMR spectroscopic analysis. The ∠O-Al-C (ca. 100.5°) bite angle is also wider than the ∠O-Ti-C (ca. 80.6°) as seen in our recently reported Ti complex [Ti(L)(NMe2)2Br]. DFT analysis showed that the CNHC-Al bond is significantly ionic, as is the CNHC-Ti bond. Both 1 and 2 are active in the ring-opening polymerization (ROP) of ε-caprolactone (CL). 2, similar to [Ti(L)(NMe2)2Br], exhibits bifunctional MLC-type monomer activation, but only at an elevated temperature. However, the 2/BnOH combination is catalytically active at room temperature, likely through a zwitterionic [Al(LH)Me2(OBn)]. The 1/BnOH combination follows a similar mechanism but surprisingly at a faster rate.

Mixed-magnesium/zinc calix[4]arene complexes: structure, and ring opening polymerisation studies

Different combinations of organomagnesium reagents and zinc bromide react with either 1,3-dimethoxy-4-tert-butylcalix[4]areneH2 (L(OMe)2H2) or trialkoxycalix[4]arenes (L(OR)3H) (R = n-Pr, n-pentyl) to afford mixed-metal calix[4]arene systems. Intriguing molecular structures are formed and the systems are capable of the ring opening polymerisation of ε-caprolactone under N2, air, or as melts.

Synthesis without solvent: consequences for mechanochemical reactivity

Solvents are so nearly omnipresent in synthetic chemistry that a classic question for their use has been: "What is the best solvent for this reaction?" The increasing use of mechanochemical approaches to synthesis-by grinding, milling, extrusion, or other means-and usually with no, or only limited, amounts of solvent, has raised an alternative question for the synthetic chemist: "What happens if there is no solvent?" This review focuses on a three-part answer to that question: when there is little change ("solvent-optional" reactions); when solvent needs to be present in some form, even if only in the amounts provided by liquid-assisted (LAG) or solvate-assisted grinding; and those cases in which mechanochemistry allows access to compounds that cannot be obtained from solution-based routes. The emphasis here is on inorganic and organometallic systems, including selected examples of mechanosynthesis and mechanocatalysis. Issues of mechanochemical depictions and the adequacy of LAG descriptions are also reviewed.

Cooperative effects of Schiff base binuclear zinc complexes on the synthesis of aliphatic and semi-aromatic polyesters

In this paper, we use mono- and bimetallic complexes based on Earth-abundant, cheap and benign zinc for the synthesis of sustainable aliphatic and semi-aromatic polyesters. Tridentate and hexadentate aldimine-thioetherphenolate ligands were used to obtain the desired zinc complexes by the reaction of proligands with opportune equivalents of zinc bis[bis(trimethylsilyl)amide]. The obtained bimetallic complexes 1 and 2 and the monometallic complex 3 were used as catalysts in the Ring-Opening Polymerization (ROP) of landmark cyclic esters, such as ε-caprolactone and lactide, and in the Ring-Opening COPolymerization (ROCOP) of cyclohexene oxide and phthalic anhydride under different reaction conditions. All catalysts were active in these two classes of reactions, showing good control of the polymerization processes. Interestingly, the bimetallic complexes have higher activity compared to their monometallic counterparts, highlighting the cooperation between the two zinc centers.

Metal Complexes in the Synthesis of Biodegradable Polymers: Achievements and Prospects

This review describes recent advances in the synthesis of homopolymers of lactide and related cyclic esters via ring-opening polymerization (ROP) in the presence of metal complexes based on group 1, 2, 4, 12, 13 and 14 metals. Particular attention is paid to the influence of the initiator structure on the properties of the obtaining homo- and copolymers. Also, a separate chapter is devoted to the study of metal complexes in the synthesis of copolymers of lactide and lactones. This review highlights the efforts made over the last ten years or so, and shows how main-group metals have received increasing attention in the field of the polymerization of lactide and related cyclic esters.

Bis(salicylamidine) Ligands (FAlen): A Variant of Salen with "à la Carte" Denticity

Ethylene- and phenylene-bridged bis(salicylamidine) ligands have been readily prepared from ethylene or phenylenediamine and iminium chloride derivatives generated in situ from N,N-dialkylsalicylamides. The former, in its diprotonated form (FAlenH₂), reacts with AlMe₃ to afford a zwitterionic dimethyldiphenoxyaluminate complex with the FAlen ligand monoprotonated and in a bidentate κ²O,O' fashion. A phenylene-bridged proligand behaves differently, yielding a neutral methylaluminum complex bearing a κ³O,N,O'-coordinated FAlen ligand. From these complexes, methyl anion abstraction with B(C₆F₅)₃ or a reaction with Schrock's alcohol leads to the corresponding aluminum cationic or alkoxy complexes in which a κ⁴O,N,N',O'-coordination mode of the FAlen ligand is observed. X-ray diffraction studies of the proligands and of the complexes show that the amidine functions feature a trans configuration when the N-amidine atom is not coordinated to the metal and conversely a cis configuration when it is. Density functional theory calculations show that trans-cis isomerization of the amidine functions occurs upon coordination with the metal ion with very low energy barriers. They also confirm the intuition that the denticity of the FAlen ligands in the complexes is directly related to the electron richness of the metal ion. At last, FAlen Al complexes are used as initiators for the controlled ring-opening polymerization of rac-lactide to afford poly(lactic acid) with slight isotactic bias.

Controlled Synthesis of Dendrite-like Polyglycerols Using Aluminum Complex for Biomedical Applications

This work describes a one-pot synthesis of dendrite-like hyperbranched polyglycerols (HPGs) via a ring-opening multibranching polymerization (ROMBP) process using a bis(5,7-dichloro-2-methyl-8-quinolinolato)methyl aluminum complex (1) as a catalyst and 1,1,1-tris(hydroxymethyl)propane/trimethylol propane (TMP) as an initiator. Single-crystal X-ray diffraction (XRD) analysis was used to elucidate the molecular structure of complex 1. Inverse-gated (IG)¹³C NMR analysis of HPGs showed degree of branching between 0.50 and 0.57. Gel permeation chromatography (GPC) analysis of the HPG polymers provided low, medium, and high-molecular weight (M _n) polymers ranging from 14 to 73 kDa and molecular weight distributions (M _w/M _n) between 1.16 and 1.35. The obtained HPGs exhibited high wettability with water contact angle between 18 and 21° and T _g ranging between -39 and -55 °C. Notably, ancillary ligand-supported aluminum complexes as catalysts for HPG polymerization reactions have not been reported to date. The obtained HPG polymers in the presence of the aluminum complex (1) can be used for various biomedical applications. Here, nanocomposite electrospun fibers were fabricated with synthesized HPG polymer. The nanofibers were subjected to cell culture experiments to evaluate cytocompatibility behavior with L929 and MG63 cells. The cytocompatibility studies of HPG polymer and nanocomposite scaffold showed high cell viability and spreading. The study results concluded, synthesized HPG polymers and composite nanofibers can be used for various biomedical applications.

Gallium (III) Complexes Based on Aminobisphenolate Ligands: Extremely High Active ROP-Initiators from Well-Known and Easily Accessible Compounds

We report herein the synthesis and full characterizations of the first examples of gallium complexes based on "privileged" aminobisphenolate ligands which are easily available. These complexes turned out to be extremely active in the ring-opening polymerization of ε-caprolactone even at room temperature and highly active in the ROP of L-lactide. The combination of factors such as the easy availability of these compounds and the supposedly low toxicity, together with the extremely high activity in ROP, allows us to consider these compounds as suitable for use on an industrial scale for the synthesis of biodegradable polymers for biomedical applications.

Aluminium complexes containing indolyl-phenolate ligands as catalysts for ring-opening polymerization of cyclic esters

A family of aluminium complexes supported by mono-anionic indolyl-phenolate ligands are described. Reactions of indolyl-phenolate based ligand precursors, IndHPhROH, with 1.0 or 0.5 equivalents of AlMe2Cl in toluene afforded aluminium indolyl-phenolate complexes 1-4 and aluminium bis-indolyl-phenolate complexes 5-8 respectively. The molecular structure is reported for 5. Based on the NMR spectroscopic and X-ray crystallographic studies, a 1,3-hydrogen shift could happen from nitrogen to carbon on the five-membered ring of the indolyl group upon reacting with aluminium reagents. These novel aluminium complexes demonstrate catalytic activities toward the ring-opening polymerization of cyclic esters in the presence of alcohol.

The versatile roles of neutral donor ligands in tuning catalyst performance for the ring-opening polymerization of cyclic esters

The use of neutral donor ligands is an effective strategy to modify catalyst structure and performance in the synthesis of sustainable polymers through the ring-opening polymerization (ROP) of cyclic esters.

Niobium and Tantalum complexes derived from the acids Ph2C(X)CO2H (X = OH, NH2): synthesis, structure and ROP capability

Tetranuclear [M4(OEt)8(L1)4(μ-O)2] and dinuclear [M2(OEt)4(L2H2)4(μ-O)] complexes (M = Nb, Ta) derived from benzilic acid (L1H2) and diphenylglycine (L2H3) have been structurally characterized and are capable of the ROP of μ-caprolactone and rac-lactide.

Cation-π interactions enabling hard/soft Ti/Ag heterobimetallic cooperativity in lactide ring-opening polymerisation

The combination of a Ti-salen complex with AgBArF reveals unique hard/soft heterobimetallic cooperativity in lactide ring-opening polymerisation (ROP), enabling significant activity at room temperature. Reactivity, mechanistic and computational studies highlight the role of cation-π interactions in the formation of heterobimetallic species and provide key insights into the role of both metals in ROP.

N-Donor stabilized tin(II) cations as efficient ROP catalysts for the synthesis of linear and star-shaped PLAs via the activated monomer mechanism

α-Iminopyridine ligands L¹ (2-(CHN(C₆H₂-2,4,6-Ph₃))C₅H₄N), L² (2-(CHN(C₆H₂-2,4,6-tBu₃))C₅H₄N) and L³ (1,2-(C₅H₄N-2-CHN)₂CH₂CH₂) differing by the steric demand of the substituent on the imine CHN group and by the number of donating nitrogen atoms were utilized to initiate a Lewis base mediated ionization of SnCl₂ in an effort to prepare ionic tin(II) species [L^1-3 → SnCl][SnCl₃]. The reaction of L¹ and L² with SnCl₂ led to the formation of neutral adducts [L¹ → SnCl₂] (2) and [L² → SnCl₂] (3). The preparation of the desired ionic compounds was achieved by subsequent reactions of 2 and 3 with an equivalent of SnCl₂ or GaCl₃. In contrast, ligand L³ containing four donor nitrogen atoms showed the ability to ionize SnCl₂ and also Sn(OTf)₂, yielding [L³ → SnCl][SnCl₃] (7) and [L³ → Sn(H₂O)][OTf]₂ (8). The study thus revealed that the reaction is dependent on the type of the ligand. The prepared complexes 4-8 together with the previously reported [{2-((CH₃)CN(C₆H₃-2,6-iPr₂))-6-CH₃O-C₅H₃N}SnCl][SnCl₃] (1) were tested as catalysts for the ROP of L-lactide, which could operate via an activated monomer mechanism. Finally, a DFT computational study was performed to evaluate the steric and electronic properties of the ionic tin(II) species 1 and 4-8 together with their ability to interact with the L-lactide monomer.

Lithiated Calix[n]arenes (n = 6 or 8): Synthesis, Structures, and Use in the Ring-Opening Polymerization of Cyclic Esters

A variety of lithiated calix[n]arenes, for which n = 6 or 8, have been isolated, structurally characterized, and evaluated as catalysts for the ring-opening polymerization (ROP) of the cyclic esters ε-caprolactone (ε-CL), δ-valerolactone (δ-VL), and rac-lactide (r-LA). In particular, interaction of p-tert-butylcalix[6]areneH₆ (L⁶H₆) with LiOtBu in THF led to the isolation of [Li₁₄(L⁶H)₂(CO₃)₂(THF)₆(OH₂)₆]·14THF (1·14THF), the core of which has a chain of five Li₂O₂ diamonds. Similar use of p-tert-butylcalix[8]areneH₈ (L⁸H₈) afforded [Li₁₀(L⁸)(OH)₂(THF)₈]·7THF (2·7THF), where the core is composed of a six-rung Li-O ladder. Use of debutylated calix[8]areneH₈ (deBuL⁸H₈) led to an elongated dimer [Li₁₈(deBuL⁸)₂(OtBu)₂(THF)₁₄]·4THF (3·4THF) in which the calix[8]arenes possess a wavelike conformation forming bridges to link three separate Li_xO_y clusters (where x and y = 6, ignoring the THF donor oxygens). Interaction of L⁸H₈ with LiOH·H₂O afforded [Li₄(L⁸H₄)(OH₂)₄(THF)₆]·5.5THF (4·5.5THF), where intramolecular H-bond interactions involving Li, O, and H construct a cage in the core of the structure with six- and eight-membered rings. Lastly, addition of Me₃Al to the solution generated from L⁸H₈ and LiOtBu led to the isolation of [(AlMe₂)₂Li₂₀(L⁸H₂)₂(OH₂)₄(O^2-)₄(OH)₂(NCMe)₁₂]·10MeCN (5·10MeCN) in which Li, O, Al, and N centers build a polyhedral core. These complexes have been screened for their potential to act as precatalysts in the ring-opening polymerization (ROP) of ε-CL, δ-VL, and r-LA. For the ROP of ε-CL, δ-VL, and r-LA, systems 1-4 exhibited moderate activity at 130 °C over 8 h. In the case of ROP using the mixed-metal (Li/Al) system 5, better conversions and high molecular weight polymers were achieved. In the case of the ROP of ω-pentadecalactone (ω-PDL), the systems proved to be inactive under the conditions employed herein.

Alkoxy-Functionalized Schiff-Base Ligation at Aluminum and Zinc: Synthesis, Structures and ROP Capability

The Schiff-base compounds 2,4-di-tert-butyl-6-(((3,4,5-trimethoxyphenyl)imino)methyl)phenol (L1H), 2,4-di-tert-butyl-6-(((2,4,6-trimethoxyphenyl)imino)methyl)phenol (L2H), 2,4-di-tert-butyl-6-(((2,4-trimethoxyphenyl)imino)methyl)phenol) (L3H) derived from anilines bearing methoxy substituents have been employed in the preparation of alkylaluminum and zinc complexes. Molecular structure determinations reveal mono-chelate aluminum complexes of the type [Al(Ln)(Me)2] (L1, 1; L2, 2; L3, 3), and bis(chelate) complexes for zinc, namely [Zn(Ln)2] (L1, 5; L2, 6; L3, 7). All complexes have significant activity at 50 °C and higher activity at 100 °C for the ring-opening polymerization (ROP) of ε-caprolactone (ε-CL) with good control over the molar mass distribution (Mw/Mn < 2) and molecular weight. Complex 1 was found to be the most active catalyst, achieving 99% conversion within 18 h at 50 °C and giving polycaprolactone with high molecular weight; results are compared against aniline-derived (i.e., non-methoxy containing) complexes (4 and 8). Aluminum or zinc complexes derived from L1 exhibit higher activity as compared with complexes derived from L2 and L3. Complex 1 was also tested as an initiator for the copolymerization of ε-CL and glycolide (GL). The CL-GL copolymers have various microstructures depending on the feed ratio. The crosslinker 4,4′-bioxepane-7,7′-dione was used in the polymerization with ε-CL using 1, and well-defined cross-linked PCL was afforded of high molecular weight.

Titanium complexes of pyrrolylaldiminate ligands and their exploitation for the ring-opening polymerization of cyclic esters

A series of six-coordinate titanium complexes 1-6 supported by pyrrolylaldiminate ligands were prepared via the reaction of 2 equivalents of ligands and Ti(OⁱPr)₄ in toluene at 70 °C. The X-ray structure of 2 revealed that the two ligands were κ²-coordinated to the titanium center with the two pyrrole nitrogen atoms in trans positions and the two imine nitrogen atoms in cis positions. All complexes were active initiators for the ring-opening polymerization (ROP) of rac-lactide (rac-LA), ε-caprolactone (ε-CL), and three substituted ε-caprolactones (γ-methyl-ε-caprolactone (γMeCL), γ-ethyl-ε-caprolactone (γEtCL), and γ-phenyl-ε-caprolactone (γPhCL)). Polymerizations of all monomers were well controlled, affording predetermined molar masses and narrow dispersity values. Complex 5 exhibited the highest polymerization activities with rac-LA and ε-CL and its performance was comparable to other highly active six-coordinate titanium complexes reported thus far. Kinetic results revealed a first-order dependency on the monomer concentration, and the rate of polymerization was greatly influenced by the substituent on the imine nitrogen. End-group analysis of the isolated PLA and PCL suggested a coordination-insertion mechanism.

Terpolymerization of CO2 with Epoxides and Cyclic Organic Anhydrides or Cyclic Esters

The synthesis of polymeric materials starting from CO2 as a feedstock is an active task of research. In particular, the copolymerization of CO2 with epoxides via ring-opening copolymerization (ROCOP) offers a simple, efficient route to synthesize aliphatic polycarbonates (APC). In many cases, APC display poor physical and chemical properties, limiting their range of application. The terpolymerization of CO2 with epoxides and organic anhydrides or cyclic esters offers the possibility, combining the ROCOP with ring-opening polymerization (ROP), to access a wide range of materials containing polycarbonate and polyester segments along the polymer chain, showing enhanced properties with respect to the simple APC. This review will cover the last advancements in the field, evidencing the crucial role of the catalytic system in determining the microstructural features of the final polymer.

Efficient Bulky Organo-Zinc Scorpionates for the Stereoselective Production of Poly(rac-lactide)s

The direct reaction of the highly sterically demanding acetamidinate-based NNN'-scorpionate protioligand Hphbp^tamd [Hphbp^tamd = N,N'-di-p-tolylbis(3,5-di-tertbutylpyrazole-1-yl)acetamidine] with one equiv. of ZnMe₂ proceeds in high yield to the mononuclear alkyl zinc complex [ZnMe(κ³-phbp^tamd)] (1). Alternatively, the treatment of the corresponding lithium precursor [Li(phbp^tamd)(THF)] with ZnCl₂ yielded the halide complex [ZnCl(κ³-phbptamd)] (2). The X-ray crystal structure of 1 confirmed unambiguously a mononuclear entity in these complexes, with the zinc centre arranged with a pseudotetrahedral environment and the scorpionate ligand in a κ³-coordination mode. Interestingly, the inexpensive, low-toxic and easily prepared complexes 1 and 2 resulted in highly efficient catalysts for the ring-opening polymerisation of lactides, a sustainable bio-resourced process industrially demanded. Thus, complex 1 behaved as a single-component robust initiator for the living and immortal ROP of rac-lactide under very mild conditions after a few hours, reaching a TOF value up to 5520 h^-1 under bulk conditions. Preliminary kinetic studies revealed apparent zero-order dependence on monomer concentration in the absence of a cocatalyst. The PLA materials produced exhibited narrow dispersity values, good agreement between the experimental M_n values and monomer/benzyl alcohol ratios, as well as enhanced levels of heteroselectivity, reaching P_s values up to 0.74.

Alkali and Alkaline Earth Metal Complexes as Versatile Catalysts for Ring-Opening Polymerization of Cyclic Esters

Biodegradable polyesters such as poly(ϵ-caprolactone) (PCL) and poly(lactic acid) (PLA) have been considered for use in several areas, such as drug delivery devices, sutures, tissue engineering, and GBR membranes, due to its bio-renewability, biodegradability, and biocompatibility. Several synthetic techniques for the preparation of polyesters have been reported in the literature, amongst which the ring-opening polymerization (ROP) of cyclic esters is the most efficient. A convenient approach to access iso-selective PLAs is polymerization of racemic lactide (rac-LA), which shows excellent stereoregularity without the need for costly chiral auxiliaries or ligands. In this personal account, we review a series of methods that have been practiced to the synthesis of biodegradable polyesters from various cyclic monomers using alkali and alkaline earth metal complexes as efficient catalysts.

Advances in heterometallic ring-opening (co)polymerisation catalysis

Truly sustainable plastics require renewable feedstocks coupled with efficient production and end-of-life degradation/recycling processes. Some of the most useful degradable materials are aliphatic polyesters, polycarbonates and polyamides, which are often prepared via ring-opening (co)polymerisation (RO(CO)P) using an organometallic catalyst. While there has been extensive research into ligand development, heterometallic cooperativity offers an equally promising yet underexplored strategy to improve catalyst performance, as heterometallic catalysts often exhibit significant activity and selectivity enhancements compared to their homometallic counterparts. This review describes advances in heterometallic RO(CO)P catalyst design, highlighting the overarching structure-activity trends and reactivity patterns to inform future catalyst design.

Bimetallic aluminum complexes bearing novel spiro-phenanthrene-monoketone/OH derivatives: synthesis, characterization and the ring-opening polymerization of ε-caprolactone

A series of spiro-phenanthrene-monoketone/OH derivatives (L1–L6) were synthesized and fully characterized with ¹H/¹³C NMR spectroscopy and elemental analyses. By treating ligands with AlMe₃, oxygen-bridged binuclear aluminum complexes (Al1–Al6) were isolated and characterized by ¹H/¹³C NMR spectroscopy. The molecular structures of ligands (L2, L4 and L5) and complex Al1 were determined by single crystal X-ray diffraction. In the presence of benzyl alcohol (BnOH), these aluminum complexes demonstrated high efficiency towards the ring-opening polymerization of ε-caprolactone (ε-CL), resulting in PCL in a linear manner with the BnO-end group. In addition, complexes Al1 and Al5 exhibited good catalytic activities even without BnOH. Moreover, complexes Al3 and Al6 with the bulkier substituent of ⁱPr at the ortho-position of the arylamines demonstrated better catalytic activities than the analogs. Moreover, substituents on the backbone also affected catalytic behaviors.

Bimetallic aluminum complexes bearing novel spiro-phenanthrene-monoketone/OH derivatives were synthesized, and displayed good activity toward the ring-opening polymerization of ε-caprolactone.

Isoselective Polymerization of rac-Lactide by Aluminum Complexes of N-Heterocyclic Carbene-Phosphinidene Adducts

The N-heterocyclic carbene-phosphinidene adducts (NHC)PH were reacted with AlMe3 in toluene to afford the monoaluminum complexes [{(IDipp)PH}AlMe3 ] and [{(IMes)PH}AlMe3 ] (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, IMes=1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). In contrast, the dialuminum complex [{(Me IMes)PH}(AlMe3 )2 ] was obtained for Me IMes=1,3-bis(2,4,6-trimethylphenyl)-4,5-dimethylimidazolin-2-ylidene. These complexes served as initiators for the efficient ring-opening polymerization of rac-lactide in toluene at 60 °C. High degrees of isoselectivity were found for the poly(rac-lactide) obtained in the presence of the monoaluminum complexes (Pm up to 0.92, Tm up to 191 °C), whereas almost atactic polymers were produced by the dialuminum complex. Detailed mechanistic studies reveal that the polymerization proceeds via a coordination-insertion mechanism with the carbene-phosphinidene ligands acting as stereodirecting groups.

Functionalized Biodegradable Polymers via Termination of Ring-Opening Polymerization by Acyl Chlorides

Aliphatic polyesters are an important class of polymeric materials for biomedical applications due to their versatile and tunable chemistry, biocompatibility and biodegradability. A capability of direct bonding with biomedically significant molecules, provided by the presence of the reactive end functional groups (FGs), is highly desirable for prospective polymers. Among FGs, N-hydroxysuccinimidyl activated ester group (NHS) and maleimide fragment (MI) provide efficient covalent bonding with -NH- and -SH containing compounds. In our study, we found that NHS- and MI-derived acyl chlorides efficiently terminate living ring-opening polymerization of ε-caprolactone, L-lactide, ethyl ethylene phosphonate and ethyl ethylene phosphate, catalyzed by 2,6-di-tert-butyl-4-methylphenoxy magnesium complex, with a formation of NHS- and MI-functionalized polymers at a high yields. Reactivity of these polymers towards amine- and thiol-containing model substrates in organic and aqueous media was also studied.

Structural analysis of five-coordinate aluminium(salen) complexes and its relationship to their catalytic activity

The crystal structure of [Al(tBu-salen)]2O·HCl shows major changes compared to that of [Al(tBu-salen)]2O. The additional proton is localized on the bridging oxygen atom, making the aluminium atoms more electron deficient. As a result, a water molecule coordinates to one of the aluminium atoms, which becomes six-coordinate. This pushes the salen ligand associated with the six-coordinate aluminium ion closer to the other salen ligand and results in the geometry around the five-coordinate aluminium atom becoming more trigonal bipyramidal. These results experimentally mirror the predications of DFT calculations on the interaction of [Al(tBu-salen)]2O and related complexes with carbon dioxide. Variable temperature NMR studies of protonated [Al(tBu-salen)]2O complexes revealed that the structures were dynamic and could be explained on the basis of an intramolecular rearrangement in which the non-salen substituent of a five-coordinate aluminium(tBu-salen) unit migrates from one face of a square based pyramidal structure to the other via the formation of structures with trigonal bipyramidal geometries. Protonated [Al(tBu-salen)]2O complexes were shown to have enhanced Lewis acidity relative to [Al(tBu-salen)]2O, coordinating to water, dioxane and 1,2-epoxyhexane. Coordinated epoxyhexane was activated towards ring-opening, to give various species which remained coordinated to the aluminium centers. The protonated [Al(tBu-salen)]2O complexes catalysed the synthesis of cyclic carbonates from epoxides and carbon dioxide both in the presence and absence of tetrabutylammonium bromide as a nucleophilic cocatalyst. The catalytic activity was principally determined by the nature of the nucleophilic species within the catalyst structure rather than by changes to the Lewis acidity of the metal centers.

Lithium calix[4]arenes: structural studies and use in the ring opening polymerization of cyclic esters

We have structurally characterized a number of lithiated calix[4]arenes, where the bridge in the calix[4]arene is thia (–S–, L^SH₄), sulfinyl (–SO–, L^SOH₄), sulfonyl (–SO₂–, L^SO2H₄), dimethyleneoxa (–CH₂OCH₂–, L^COCH₄) or methylene (–CH₂–, LH₄). In the case of L^4SH₄, interaction with LiOtBu led to the isolation of the complex [Li₈(L^4S)₂(THF)₄]·5THF (1·5THF), whilst similar interaction of L^4SOH₄ led to the isolation of [Li₆(L^4SOH)₂(THF)₂]·5(THF) (2·5THF). Interestingly, the mixed sulfinyl/sulfonyl complexes [Li₈(calix[4]arene(SO)(SO₂)(SO_1.68)₂)₂(THF)₆]·8(THF) (3·8THF) and [Li₅Na(L^SO/3SO2H)₂(THF)₅]·7.5(THF) (4·7.5(THF) have also been characterized. Interaction of LiOtBu with L^SO2H₄ and L^COCH₄ afforded [Li₅L^4SO2(OH)(THF)₄]·2THF (5·2THF) and [Li₆(L^COC)₂(HOtBu)₂]·0.78THF·1.22hexane (6·0.78THF·1.22hexane), respectively. In the case of LH₄, reaction with LiOtBu in THF afforded a monoclinic polymorph [LH₂Li₂(thf)(OH₂)₂]·3THF (7·3THF) of a known triclinic form of the complex, whilst reaction of the de-butylated analogue of LH₄, namely de-BuLH₄, afforded a polymeric chain structure {[Li₅(de-BuL)(OH)(NCMe)₃]·2MeCN}_n (8·2MeCN). For comparative catalytic studies, the complex [Li₆(L^Pr)₂(H₂O)₂]·hexane (9 hexane), where L^Pr2H₂ = 1,3-di-n-propyloxycalix[4]areneH₂, was also prepared. The molecular crystal structures of 1–9 are reported, and their ability to act as catalysts for the ring opening (co-)/polymerization (ROP) of the cyclic esters ε-caprolactone, δ-valerolactone, and rac-lactide has been investigated. In most of the cases, complex 6 outperformed the other systems, allowing for higher conversions and/or greated polymer M_n.

Novel Li-calix[n]arene complexes (n = 3, 4) having (–S–), (–SO–), (–SO₂–), (–CH₂OCH₂–) or (–CH₂–) bridges have been synthesized and fully characterized. Their catalytic activity in the ring opening polymerization of lactones has been studied.